Setting up my DVD and cdrom drives
I tried to download some jpeg files that I burned onto a dvd from a windows machine, yet I can't get it to open. My cd rom did ok to load Kubuntu, however when I look at Sys. Settings - Disk & Filesystems this is what I get.
Disk ATA ( thats fine) | System | Optical disk HL-DT-ST DVDRAM GSA-4163B (mount point) None, /dev/hdb | Optical disk Plextor CD-R PX-W5224A (mount point) /media/cdrom0 auto, /dev/hda Disabled. How do I setup the DVD mount point. Is that all I have to do to get it working.? How do I enable the CD-R.? |
Hi,
The CD-R drive seems to be enabled, but the DVDRAM isn't (the former has a mount point, the latter does not). Can you please post the output of the following console command: Code:
cat /etc/fstab And I'm assuming this is on Libranet? As a quick test, go to terminal/console and enter the following commands: Code:
$ sudo mkdir /mnt/dvdram Cheers, -jk (Please post your fstab contents, because then we can help you to edit it manually to set your drive to load automatically) |
Setting up my DVD and cdrom drives
Here is the contents of cat /etc/fstab:
peterhin@GnuLinux02:~$ cat /etc/fstab # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/sda1 / ext3 nouser,defaults,errors=remount-ro,atime,auto,rw,dev,exec,suid 0 1 /dev/sda5 none swap sw 0 0 /dev/hda /media/cdrom0 auto user,atime,auto,rw,dev,exec,suid 0 0 peterhin@GnuLinux02:~$ This is what I get when I follow your second question. peterhin@GnuLinux02:~$ sudo mkdir /mnt/dvdram peterhin@GnuLinux02:~$ sudo mount /dev/hdb /mnt/dvdram mount: No medium found peterhin@GnuLinux02:~$ ls /mnt/dvdram peterhin@GnuLinux02:~$ I am sorry I should have indicated earlier I have just installed Kubuntu 6.0.6 |
Hmm... I'd offer the modified fstab, but the fact that you could not mount /dev/hdb is slightly worrying.
Could you please post the output of 'dmesg'? Thanks. |
Setting up my DVD and cdrom drives
Here's the info:
peterhin@GnuLinux02:~$ dmesg [17179569.184000] Linux version 2.6.15-26-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:40:32 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [17179569.184000] 127MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] On node 0 totalpages: 262128 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 32752 pages, LIFO batch:7 [17179569.184000] DMI 2.2 present. [17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0 [17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 [17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 [17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7640 [17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x4008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:10 APIC version 16 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored. [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] ACPI: IRQ14 used by override. |
Setting up my DVD and cdrom drives
Here's some more"
[17179569.184000] ACPI: IRQ15 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Detected 2079.757 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.376000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.380000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.408000] Memory: 1027208k/1048512k available (2103k kernel code, 20568k reserved, 600k data, 332k init, 131008k highmem) [17179569.408000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.488000] Calibrating delay using timer specific routine.. 4163.86 BogoMIPS (lpj=8327722) [17179569.488000] Security Framework v1.0.0 initialized [17179569.488000] SELinux: Disabled at boot. [17179569.488000] Mount-cache hash table entries: 512 [17179569.488000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [17179569.488000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [17179569.488000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17179569.488000] CPU: L2 Cache: 512K (64 bytes/line) [17179569.488000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [17179569.488000] mtrr: v2.0 (20020519) [17179569.488000] Enabling fast FPU save and restore... done. [17179569.488000] Enabling unmasked SIMD FPU exception support... done. [17179569.488000] Checking 'hlt' instruction... OK. [17179569.504000] SMP alternatives: switching to UP code [17179569.504000] checking if image is initramfs... it is [17179570.008000] Freeing initrd memory: 6761k freed [17179570.020000] ACPI: Looking for DSDT ... not found! [17179570.024000] CPU0: AMD Athlon(tm) XP 2800+ stepping 00 [17179570.024000] Total of 1 processors activated (4163.86 BogoMIPS). [17179570.024000] ENABLING IO-APIC IRQs [17179570.024000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [17179570.168000] Brought up 1 CPUs [17179570.168000] NET: Registered protocol family 16 [17179570.168000] EISA bus registered [17179570.168000] ACPI: bus type pci registered [17179570.184000] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 [17179570.184000] PCI: Using configuration type 1 [17179570.184000] ACPI: Subsystem revision 20051216 [17179570.192000] ACPI: Interpreter enabled [17179570.192000] ACPI: Using IOAPIC for interrupt routing [17179570.192000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.192000] PCI: Probing PCI hardware (bus 00) [17179570.196000] PCI: nForce2 C1 Halt Disconnect fixup [17179570.196000] Boot video device is 0000:03:00.0 [17179570.196000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.256000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [17179570.256000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [17179570.256000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.256000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.256000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [17179570.256000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [17179570.256000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [17179570.264000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [17179570.268000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.268000] pnp: PnP ACPI init [17179570.276000] pnp: PnP ACPI: found 16 devices [17179570.276000] PnPBIOS: Disabled by ACPI PNP [17179570.276000] PCI: Using ACPI for IRQ routing [17179570.276000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.336000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved [17179570.336000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [17179570.336000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [17179570.336000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved [17179570.336000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved [17179570.336000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved [17179570.336000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved [17179570.336000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved [17179570.336000] PCI: Bridge: 0000:00:08.0 [17179570.336000] IO window: 9000-afff [17179570.336000] MEM window: e7000000-e8ffffff [17179570.336000] PREFETCH window: 50000000-500fffff [17179570.336000] PCI: Bridge: 0000:00:1e.0 [17179570.336000] IO window: c000-cfff [17179570.336000] MEM window: e5000000-e6ffffff [17179570.336000] PREFETCH window: d0000000-dfffffff [17179570.336000] PCI: Setting latency timer of device 0000:00:08.0 to 64 [17179570.336000] audit: initializing netlink socket (disabled) [17179570.336000] audit(1155757196.332:1): initialized [17179570.336000] highmem bounce pool size: 64 pages [17179570.336000] VFS: Disk quotas dquot_6.5.1 [17179570.336000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.336000] Initializing Cryptographic API [17179570.336000] io scheduler noop registered [17179570.336000] io scheduler anticipatory registered [17179570.336000] io scheduler deadline registered [17179570.336000] io scheduler cfq registered [17179570.336000] isapnp: Scanning for PnP cards... [17179570.692000] isapnp: No Plug & Play device found [17179570.708000] Real Time Clock Driver v1.12 [17179570.708000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179570.708000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179570.708000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179570.708000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179570.708000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179570.708000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [17179570.712000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179570.712000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [17179570.712000] **** SET: Misaligned resource pointer: df84b3c2 Type 07 Len 0 [17179570.712000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [17179570.712000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 177 |
Setting up my DVD and cdrom drives
And Again;
[17179570.712000] 0000:01:09.0: ttyS4 at I/O 0x9400 (irq = 177) is a 16550A [17179570.712000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179570.712000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179570.712000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179570.712000] mice: PS/2 mouse device common for all mice [17179570.712000] EISA: Probing bus 0 at eisa.0 [17179570.712000] Cannot allocate resource for EISA slot 4 [17179570.712000] Cannot allocate resource for EISA slot 5 [17179570.712000] EISA: Detected 0 cards. [17179570.712000] NET: Registered protocol family 2 [17179570.740000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179570.752000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179570.752000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [17179570.756000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179570.756000] TCP: Hash tables configured (established 262144 bind 65536) [17179570.756000] TCP reno registered [17179570.756000] TCP bic registered [17179570.756000] NET: Registered protocol family 1 [17179570.756000] NET: Registered protocol family 8 [17179570.756000] NET: Registered protocol family 20 [17179570.756000] Using IPI No-Shortcut mode [17179570.756000] ACPI wakeup devices: [17179570.756000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 [17179570.756000] ACPI: (supports S0 S1 S4 S5) [17179570.756000] Freeing unused kernel memory: 332k freed [17179570.800000] vga16fb: initializing [17179570.800000] vga16fb: mapped to 0xc00a0000 [17179570.932000] Console: switching to colour frame buffer device 80x25 [17179570.932000] fb0: VGA16 VGA frame buffer device [17179572.008000] Capability LSM initialized [17179572.732000] SCSI subsystem initialized [17179572.732000] ACPI: bus type scsi registered [17179572.732000] libata version 1.20 loaded. [17179572.732000] sata_sil 0000:01:0b.0: version 0.9 [17179572.732000] **** SET: Misaligned resource pointer: df870b62 Type 07 Len 0 [17179572.732000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [17179572.732000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 185 [17179572.732000] ata1: SATA max UDMA/100 cmd 0xF885E080 ctl 0xF885E08A bmdma 0xF885E000 irq 185 [17179572.736000] ata2: SATA max UDMA/100 cmd 0xF885E0C0 ctl 0xF885E0CA bmdma 0xF885E008 irq 185 [17179572.940000] ata1: no device found (phy stat 00000000) [17179572.940000] scsi0 : sata_sil [17179573.320000] ata2: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f 93:0000 [17179573.320000] ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48 [17179573.320000] sata_get_dev_handle: SATA dev addr=0xb0000, handle=0x00000000 [17179573.320000] ata2: dev 0 configured for UDMA/100 [17179573.320000] sata_get_dev_handle: SATA dev addr=0xb0000, handle=0x00000000 [17179573.320000] scsi1 : sata_sil [17179573.320000] Vendor: ATA Model: ST380817AS Rev: 3.42 [17179573.320000] Type: Direct-Access ANSI SCSI revision: 05 [17179573.324000] Driver 'sd' needs updating - please use bus_type methods [17179573.324000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [17179573.324000] SCSI device sda: drive cache: write back [17179573.328000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [17179573.328000] SCSI device sda: drive cache: write back [17179573.328000] sda: sda1 sda2 < sda5 > [17179573.352000] sd 1:0:0:0: Attached scsi disk sda [17179573.520000] NFORCE2: IDE controller at PCI slot 0000:00:09.0 [17179573.520000] NFORCE2: chipset revision 162 [17179573.520000] NFORCE2: not 100% native mode: will probe irqs later [17179573.520000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [17179573.520000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [17179573.520000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [17179573.520000] Probing IDE interface ide0... [17179574.260000] hda: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive [17179575.044000] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive [17179575.104000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179575.108000] Probing IDE interface ide1... [17179575.692000] hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179575.692000] Uniform CD-ROM driver Revision: 3.20 [17179575.696000] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179575.780000] usbcore: registered new driver usbfs [17179575.780000] usbcore: registered new driver hub [17179575.780000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [17179575.780000] **** SET: Misaligned resource pointer: df8707a2 Type 07 Len 0 [17179575.780000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [17179575.780000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 193 [17179575.780000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [17179575.780000] ohci_hcd 0000:00:02.0: OHCI Host Controller [17179575.812000] ieee1394: Initialized config rom entry `ip1394' [17179575.824000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [17179575.824000] ohci_hcd 0000:00:02.0: irq 193, io mem 0xe9087000 [17179575.884000] hub 1-0:1.0: USB hub found [17179575.884000] hub 1-0:1.0: 3 ports detected [17179575.988000] **** SET: Misaligned resource pointer: df8704a2 Type 07 Len 0 [17179575.992000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [17179575.992000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 201 [17179575.992000] PCI: Setting latency timer of device 0000:00:02.1 to 64 [17179575.992000] ohci_hcd 0000:00:02.1: OHCI Host Controller [17179576.020000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [17179576.020000] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe9082000 [17179576.080000] hub 2-0:1.0: USB hub found [17179576.080000] hub 2-0:1.0: 3 ports detected [17179576.188000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org> [17179576.188000] **** SET: Misaligned resource pointer: df870322 Type 07 Len 0 [17179576.188000] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20 [17179576.188000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20 (level, high) -> IRQ 209 [17179576.188000] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [17179576.240000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[e9084000-e90847ff] Max Packet=[2048] [17179576.244000] **** SET: Misaligned resource pointer: df870322 Type 07 Len 0 [17179576.244000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [17179576.244000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 193 [17179576.244000] PCI: Setting latency timer of device 0000:00:02.2 to 64 [17179576.244000] ehci_hcd 0000:00:02.2: EHCI Host Controller [17179576.244000] ehci_hcd 0000:00:02.2: debug port 1 [17179576.244000] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [17179576.244000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [17179576.244000] ehci_hcd 0000:00:02.2: irq 193, io mem 0xe9083000 [17179576.244000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179576.244000] hub 3-0:1.0: USB hub found [17179576.244000] hub 3-0:1.0: 6 ports detected [17179576.376000] Probing IDE interface ide1... [17179576.960000] Attempting manual resume [17179576.992000] EXT3-fs: mounted filesystem with ordered data mode. [17179577.008000] kjournald starting. Commit interval 5 seconds [17179577.356000] ohci1394: fw-host0: SelfID received outside of bus reset sequence [17179577.628000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800005806b3] [17179583.144000] sd 1:0:0:0: Attached scsi generic sg0 type 0 [17179584.228000] Linux agpgart interface v0.101 (c) Dave Jones [17179584.228000] agpgart: Detected NVIDIA nForce2 chipset [17179584.232000] agpgart: AGP aperture is 64M @ 0xe0000000 [17179584.368000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 [17179584.368000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500 [17179584.444000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. [17179584.444000] **** SET: Misaligned resource pointer: dfde4ac2 Type 07 Len 0 [17179584.444000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [17179584.444000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 201 [17179584.444000] PCI: Setting latency timer of device 0000:00:04.0 to 64 [17179584.504000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179584.788000] input: PC Speaker as /class/input/input1 [17179584.964000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 [17179584.964000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179585.020000] **** SET: Misaligned resource pointer: dfde4702 Type 07 Len 0 [17179585.020000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 [17179585.020000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 209 [17179585.020000] PCI: Setting latency timer of device 0000:00:06.0 to 64 [17179585.160000] Floppy drive(s): fd0 is 1.44M [17179585.180000] FDC 0 is a post-1991 82077 [17179585.292000] parport: PnPBIOS parport detected. [17179585.292000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [17179585.344000] intel8x0_measure_ac97_clock: measured 56593 usecs [17179585.344000] intel8x0: clocking to 48000 [17179585.364000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 177 [17179585.364000] skge 1.3 addr 0xe8000000 irq 177 chip Yukon-Lite rev 7 [17179585.364000] skge eth1: addr 00:0e:a6:54:54:fb [17179585.584000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [17179585.784000] ts: Compaq touchscreen protocol output [17179586.136000] lp0: using parport0 (interrupt-driven). [17179586.180000] skge eth1: enabling interface [17179586.196000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org> [17179586.196000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179586.196000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179586.284000] Adding 3036244k swap on /dev/sda5. Priority:-1 extents:1 across:3036244k [17179586.788000] EXT3 FS on sda1, internal journal [17179587.264000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179587.264000] md: bitmap version 4.39 [17179587.316000] NET: Registered protocol family 17 [17179588.132000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [17179588.424000] cdrom: open failed. [17179588.856000] cdrom: open failed. [17179588.864000] cdrom: open failed. [17179589.920000] NET: Registered protocol family 10 [17179589.920000] lo: Disabled Privacy Extensions [17179589.920000] ADDRCONF(NETDEV_UP): eth1: link is not ready [17179589.920000] IPv6 over IPv4 tunneling driver [17179594.336000] ACPI: Power Button (FF) [PWRF] [17179594.336000] ACPI: Power Button (CM) [PWRB] [17179594.424000] ibm_acpi: ec object not found [17179594.448000] pcc_acpi: loading... [17179596.632000] ppdev: user-space parallel port driver [17179596.984000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [17179596.984000] apm: overridden by ACPI. [17179599.560000] Bluetooth: Core ver 2.8 [17179599.560000] NET: Registered protocol family 31 [17179599.560000] Bluetooth: HCI device and connection manager initialized [17179599.560000] Bluetooth: HCI socket layer initialized [17179599.584000] Bluetooth: L2CAP ver 2.8 [17179599.584000] Bluetooth: L2CAP socket layer initialized [17179599.600000] Bluetooth: RFCOMM socket layer initialized [17179599.600000] Bluetooth: RFCOMM TTY layer initialized [17179599.600000] Bluetooth: RFCOMM ver 1.7 [17179600.568000] eth0: no IPv6 routers present [17179601.892000] [drm] Initialized drm 1.0.1 20051102 [17179601.900000] **** SET: Misaligned resource pointer: f76449e2 Type 07 Len 0 [17179601.900000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [17179601.900000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 217 [17179601.900000] [drm] Initialized radeon 1.24.0 20060225 on minor 0 [17179602.280000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [17179602.280000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [17179602.284000] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode [17179602.612000] [drm] Setting GART location based on new memory map [17179602.612000] [drm] Loading R200 Microcode [17179602.616000] [drm] writeback test succeeded in 1 usecs [17180996.196000] hdb: irq timeout: status=0xd0 { Busy } [17180996.196000] ide: failed opcode was: unknown [17180996.196000] hdb: DMA disabled [17180996.292000] hdb: ATAPI reset complete [17181010.008000] UDF-fs: No partition found (1) [17181010.392000] UDF-fs: No partition found (1) [17181010.620000] Unable to identify CD-ROM format. [17181010.816000] Unable to identify CD-ROM format. [17181010.892000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [17181011.152000] FAT: bogus number of reserved sectors [17181011.152000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181011.208000] FAT: bogus number of reserved sectors [17181011.208000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181011.228000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17181011.280000] NTFS-fs warning (device hdb): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. [17181011.280000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181011.352000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181011.584000] HFS+-fs: unable to find HFS+ superblock [17181011.704000] HFS+-fs: unable to find HFS+ superblock [17181011.768000] VFS: Can't find a HFS filesystem on dev hdb. [17181011.824000] VFS: Can't find a HFS filesystem on dev hdb. [17181012.152000] VFS: Can't find ext3 filesystem on dev hdb. [17181012.212000] VFS: Can't find ext3 filesystem on dev hdb. [17181012.280000] VFS: Can't find an ext2 filesystem on dev hdb. [17181012.340000] VFS: Can't find an ext2 filesystem on dev hdb. [17181012.416000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181012.624000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181012.728000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [17181012.728000] SGI XFS Quota Management subsystem [17181012.836000] XFS: bad magic number [17181012.840000] XFS: SB validate failed [17181012.900000] XFS: bad magic number [17181012.900000] XFS: SB validate failed [17181012.924000] JFS: nTxBlock = 8083, nTxLock = 64665 [17181054.852000] UDF-fs: No partition found (1) [17181055.220000] UDF-fs: No partition found (1) [17181055.412000] Unable to identify CD-ROM format. [17181055.612000] Unable to identify CD-ROM format. [17181055.672000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [17181055.948000] FAT: bogus number of reserved sectors [17181055.948000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181056.004000] FAT: bogus number of reserved sectors [17181056.008000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181056.064000] NTFS-fs warning (device hdb): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. [17181056.064000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181056.124000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181056.332000] HFS+-fs: unable to find HFS+ superblock [17181056.396000] HFS+-fs: unable to find HFS+ superblock [17181056.452000] VFS: Can't find a HFS filesystem on dev hdb. [17181056.524000] VFS: Can't find a HFS filesystem on dev hdb. [17181056.844000] VFS: Can't find ext3 filesystem on dev hdb. [17181056.904000] VFS: Can't find ext3 filesystem on dev hdb. [17181056.964000] VFS: Can't find an ext2 filesystem on dev hdb. [17181057.028000] VFS: Can't find an ext2 filesystem on dev hdb. [17181057.084000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181057.272000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181057.460000] XFS: bad magic number [17181057.464000] XFS: SB validate failed [17181057.524000] XFS: bad magic number [17181057.524000] XFS: SB validate failed [17192432.400000] ohci_hcd 0000:00:02.0: wakeup [17192432.784000] usb 1-2: new full speed USB device using ohci_hcd and address 2 [17192433.100000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [17192433.100000] usbcore: registered new driver usblp [17192433.100000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [17193209.988000] usb 1-2: USB disconnect, address 2 [17193209.988000] drivers/usb/class/usblp.c: usblp0: removed [17287031.760000] cdrom: open failed. [17287031.772000] cdrom: open failed. peterhin@GnuLinux02:~$ I'll talk with you tomorrow, Work starts at 04:00. Many thanks. |
Type "sudo kwrite /etc/fstab", remove everything, and put the following in its place:
Code:
# /etc/fstab: static file system information. Talk to you tomorrow, -jk |
Setting up my DVD and cdrom drives
Here's what I got when I made the changes that you suggested. FYI I only had to add the last line all the rest was the same.
[17179569.184000] Linux version 2.6.15-26-k7 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:40:32 UTC 2006 [17179569.184000] BIOS-provided physical RAM map: [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [17179569.184000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [17179569.184000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [17179569.184000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [17179569.184000] 127MB HIGHMEM available. [17179569.184000] 896MB LOWMEM available. [17179569.184000] On node 0 totalpages: 262128 [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 [17179569.184000] Normal zone: 225280 pages, LIFO batch:31 [17179569.184000] HighMem zone: 32752 pages, LIFO batch:7 [17179569.184000] DMI 2.2 present. [17179569.184000] ACPI: RSDP (v000 Nvidia ) @ 0x000f75e0 [17179569.184000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 [17179569.184000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 [17179569.184000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7640 [17179569.184000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 [17179569.184000] ACPI: PM-Timer IO Port: 0x4008 [17179569.184000] ACPI: Local APIC address 0xfee00000 [17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [17179569.184000] Processor #0 6:10 APIC version 16 [17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored. [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [17179569.184000] ACPI: IRQ9 used by override. [17179569.184000] ACPI: IRQ14 used by override. [17179569.184000] ACPI: IRQ15 used by override. [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs [17179569.184000] Using ACPI (MADT) for SMP configuration information [17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [17179569.184000] Built 1 zonelists [17179569.184000] Kernel command line: root=/dev/sda1 ro quiet splash [17179569.184000] mapped APIC to ffffd000 (fee00000) [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) [17179569.184000] Initializing CPU#0 [17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes) [17179569.184000] Detected 2079.757 MHz processor. [17179569.184000] Using pmtmr for high-res timesource [17179569.184000] Console: colour VGA+ 80x25 [17179569.376000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [17179569.380000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [17179569.408000] Memory: 1027208k/1048512k available (2103k kernel code, 20568k reserved, 600k data, 332k init, 131008k highmem) [17179569.408000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [17179569.488000] Calibrating delay using timer specific routine.. 4163.86 BogoMIPS (lpj=8327722 |
Setting up my DVD and cdrom drives
[17179569.488000] Security Framework v1.0.0 initialized
[17179569.488000] SELinux: Disabled at boot. [17179569.488000] Mount-cache hash table entries: 512 [17179569.488000] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [17179569.488000] CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [17179569.488000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17179569.488000] CPU: L2 Cache: 512K (64 bytes/line) [17179569.488000] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [17179569.488000] mtrr: v2.0 (20020519) [17179569.488000] Enabling fast FPU save and restore... done. [17179569.488000] Enabling unmasked SIMD FPU exception support... done. [17179569.488000] Checking 'hlt' instruction... OK. [17179569.504000] SMP alternatives: switching to UP code [17179569.504000] checking if image is initramfs... it is [17179570.008000] Freeing initrd memory: 6761k freed [17179570.020000] ACPI: Looking for DSDT ... not found! [17179570.024000] CPU0: AMD Athlon(tm) XP 2800+ stepping 00 [17179570.024000] Total of 1 processors activated (4163.86 BogoMIPS). [17179570.024000] ENABLING IO-APIC IRQs [17179570.024000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [17179570.168000] Brought up 1 CPUs [17179570.168000] NET: Registered protocol family 16 [17179570.168000] EISA bus registered [17179570.168000] ACPI: bus type pci registered [17179570.184000] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 [17179570.184000] PCI: Using configuration type 1 [17179570.184000] ACPI: Subsystem revision 20051216 [17179570.192000] ACPI: Interpreter enabled [17179570.192000] ACPI: Using IOAPIC for interrupt routing [17179570.192000] ACPI: PCI Root Bridge [PCI0] (0000:00) [17179570.192000] PCI: Probing PCI hardware (bus 00) [17179570.196000] PCI: nForce2 C1 Halt Disconnect fixup [17179570.196000] Boot video device is 0000:03:00.0 [17179570.196000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17179570.256000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [17179570.256000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [17179570.256000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.256000] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.256000] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [17179570.256000] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [17179570.256000] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [17179570.260000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. [17179570.260000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. [17179570.264000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [17179570.264000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [17179570.268000] Linux Plug and Play Support v0.97 (c) Adam Belay [17179570.268000] pnp: PnP ACPI init [17179570.276000] pnp: PnP ACPI: found 16 devices [17179570.276000] PnPBIOS: Disabled by ACPI PNP [17179570.276000] PCI: Using ACPI for IRQ routing [17179570.276000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [17179570.336000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved [17179570.336000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [17179570.336000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [17179570.336000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved [17179570.336000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved [17179570.336000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved [17179570.336000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved [17179570.336000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved [17179570.336000] PCI: Bridge: 0000:00:08.0 [17179570.336000] IO window: 9000-afff [17179570.336000] MEM window: e7000000-e8ffffff [17179570.336000] PREFETCH window: 50000000-500fffff [17179570.336000] PCI: Bridge: 0000:00:1e.0 [17179570.336000] IO window: c000-cfff [17179570.336000] MEM window: e5000000-e6ffffff [17179570.336000] PREFETCH window: d0000000-dfffffff [17179570.336000] PCI: Setting latency timer of device 0000:00:08.0 to 64 [17179570.336000] audit: initializing netlink socket (disabled) [17179570.336000] audit(1155757196.332:1): initialized [17179570.336000] highmem bounce pool size: 64 pages [17179570.336000] VFS: Disk quotas dquot_6.5.1 [17179570.336000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [17179570.336000] Initializing Cryptographic API [17179570.336000] io scheduler noop registered [17179570.336000] io scheduler anticipatory registered [17179570.336000] io scheduler deadline registered [17179570.336000] io scheduler cfq registered [17179570.336000] isapnp: Scanning for PnP cards... [17179570.692000] isapnp: No Plug & Play device found [17179570.708000] Real Time Clock Driver v1.12 [17179570.708000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [17179570.708000] serio: i8042 AUX port at 0x60,0x64 irq 12 [17179570.708000] serio: i8042 KBD port at 0x60,0x64 irq 1 [17179570.708000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [17179570.708000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179570.708000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [17179570.712000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [17179570.712000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [17179570.712000] **** SET: Misaligned resource pointer: df84b3c2 Type 07 Len 0 [17179570.712000] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [17179570.712000] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 177 |
Setting up my DVD and cdrom drives
[17179570.712000] 0000:01:09.0: ttyS4 at I/O 0x9400 (irq = 177) is a 16550A
[17179570.712000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [17179570.712000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [17179570.712000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17179570.712000] mice: PS/2 mouse device common for all mice [17179570.712000] EISA: Probing bus 0 at eisa.0 [17179570.712000] Cannot allocate resource for EISA slot 4 [17179570.712000] Cannot allocate resource for EISA slot 5 [17179570.712000] EISA: Detected 0 cards. [17179570.712000] NET: Registered protocol family 2 [17179570.740000] input: AT Translated Set 2 keyboard as /class/input/input0 [17179570.752000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes) [17179570.752000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes) [17179570.756000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [17179570.756000] TCP: Hash tables configured (established 262144 bind 65536) [17179570.756000] TCP reno registered [17179570.756000] TCP bic registered [17179570.756000] NET: Registered protocol family 1 [17179570.756000] NET: Registered protocol family 8 [17179570.756000] NET: Registered protocol family 20 [17179570.756000] Using IPI No-Shortcut mode [17179570.756000] ACPI wakeup devices: [17179570.756000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 [17179570.756000] ACPI: (supports S0 S1 S4 S5) [17179570.756000] Freeing unused kernel memory: 332k freed [17179570.800000] vga16fb: initializing [17179570.800000] vga16fb: mapped to 0xc00a0000 [17179570.932000] Console: switching to colour frame buffer device 80x25 [17179570.932000] fb0: VGA16 VGA frame buffer device [17179572.008000] Capability LSM initialized [17179572.732000] SCSI subsystem initialized [17179572.732000] ACPI: bus type scsi registered [17179572.732000] libata version 1.20 loaded. [17179572.732000] sata_sil 0000:01:0b.0: version 0.9 [17179572.732000] **** SET: Misaligned resource pointer: df870b62 Type 07 Len 0 [17179572.732000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [17179572.732000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 185 [17179572.732000] ata1: SATA max UDMA/100 cmd 0xF885E080 ctl 0xF885E08A bmdma 0xF885E000 irq 185 [17179572.736000] ata2: SATA max UDMA/100 cmd 0xF885E0C0 ctl 0xF885E0CA bmdma 0xF885E008 irq 185 [17179572.940000] ata1: no device found (phy stat 00000000) [17179572.940000] scsi0 : sata_sil [17179573.320000] ata2: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f 93:0000 [17179573.320000] ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48 [17179573.320000] sata_get_dev_handle: SATA dev addr=0xb0000, handle=0x00000000 [17179573.320000] ata2: dev 0 configured for UDMA/100 [17179573.320000] sata_get_dev_handle: SATA dev addr=0xb0000, handle=0x00000000 [17179573.320000] scsi1 : sata_sil [17179573.320000] Vendor: ATA Model: ST380817AS Rev: 3.42 [17179573.320000] Type: Direct-Access ANSI SCSI revision: 05 [17179573.324000] Driver 'sd' needs updating - please use bus_type methods [17179573.324000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [17179573.324000] SCSI device sda: drive cache: write back [17179573.328000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [17179573.328000] SCSI device sda: drive cache: write back [17179573.328000] sda: sda1 sda2 < sda5 > [17179573.352000] sd 1:0:0:0: Attached scsi disk sda [17179573.520000] NFORCE2: IDE controller at PCI slot 0000:00:09.0 [17179573.520000] NFORCE2: chipset revision 162 [17179573.520000] NFORCE2: not 100% native mode: will probe irqs later [17179573.520000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [17179573.520000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [17179573.520000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [17179573.520000] Probing IDE interface ide0... [17179574.260000] hda: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive [17179575.044000] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive [17179575.104000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17179575.108000] Probing IDE interface ide1... [17179575.692000] hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179575.692000] Uniform CD-ROM driver Revision: 3.20 [17179575.696000] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [17179575.780000] usbcore: registered new driver usbfs [17179575.780000] usbcore: registered new driver hub [17179575.780000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [17179575.780000] **** SET: Misaligned resource pointer: df8707a2 Type 07 Len 0 [17179575.780000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [17179575.780000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 193 [17179575.780000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [17179575.780000] ohci_hcd 0000:00:02.0: OHCI Host Controller [17179575.812000] ieee1394: Initialized config rom entry `ip1394' [17179575.824000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [17179575.824000] ohci_hcd 0000:00:02.0: irq 193, io mem 0xe9087000 [17179575.884000] hub 1-0:1.0: USB hub found [17179575.884000] hub 1-0:1.0: 3 ports detected [17179575.988000] **** SET: Misaligned resource pointer: df8704a2 Type 07 Len 0 [17179575.992000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 [17179575.992000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 201 [17179575.992000] PCI: Setting latency timer of device 0000:00:02.1 to 64 [17179575.992000] ohci_hcd 0000:00:02.1: OHCI Host Controller [17179576.020000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [17179576.020000] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe9082000 [17179576.080000] hub 2-0:1.0: USB hub found [17179576.080000] hub 2-0:1.0: 3 ports detected [17179576.188000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org> [17179576.188000] **** SET: Misaligned resource pointer: df870322 Type 07 Len 0 [17179576.188000] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20 [17179576.188000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20 (level, high) -> IRQ 209 [17179576.188000] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [17179576.240000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[e9084000-e90847ff] Max Packet=[2048] [17179576.244000] **** SET: Misaligned resource pointer: df870322 Type 07 Len 0 [17179576.244000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [17179576.244000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 193 [17179576.244000] PCI: Setting latency timer of device 0000:00:02.2 to 64 [17179576.244000] ehci_hcd 0000:00:02.2: EHCI Host Controller [17179576.244000] ehci_hcd 0000:00:02.2: debug port 1 [17179576.244000] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [17179576.244000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 [17179576.244000] ehci_hcd 0000:00:02.2: irq 193, io mem 0xe9083000 [17179576.244000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17179576.244000] hub 3-0:1.0: USB hub found [17179576.244000] hub 3-0:1.0: 6 ports detected [17179576.376000] Probing IDE interface ide1... [17179576.960000] Attempting manual resume [17179576.992000] EXT3-fs: mounted filesystem with ordered data mode. [17179577.008000] kjournald starting. Commit interval 5 seconds [17179577.356000] ohci1394: fw-host0: SelfID received outside of bus reset sequence [17179577.628000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800005806b3] [17179583.144000] sd 1:0:0:0: Attached scsi generic sg0 type 0 [17179584.228000] Linux agpgart interface v0.101 (c) Dave Jones [17179584.228000] agpgart: Detected NVIDIA nForce2 chipset [17179584.232000] agpgart: AGP aperture is 64M @ 0xe0000000 [17179584.368000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000 [17179584.368000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500 [17179584.444000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54. [17179584.444000] **** SET: Misaligned resource pointer: dfde4ac2 Type 07 Len 0 [17179584.444000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [17179584.444000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 201 [17179584.444000] PCI: Setting latency timer of device 0000:00:04.0 to 64 [17179584.504000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17179584.788000] input: PC Speaker as /class/input/input1 [17179584.964000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 [17179584.964000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17179585.020000] **** SET: Misaligned resource pointer: dfde4702 Type 07 Len 0 [17179585.020000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 [17179585.020000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 209 [17179585.020000] PCI: Setting latency timer of device 0000:00:06.0 to 64 [17179585.160000] Floppy drive(s): fd0 is 1.44M [17179585.180000] FDC 0 is a post-1991 82077 [17179585.292000] parport: PnPBIOS parport detected. [17179585.292000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [17179585.344000] intel8x0_measure_ac97_clock: measured 56593 usecs [17179585.344000] intel8x0: clocking to 48000 [17179585.364000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 177 [17179585.364000] skge 1.3 addr 0xe8000000 irq 177 chip Yukon-Lite rev 7 [17179585.364000] skge eth1: addr 00:0e:a6:54:54:fb [17179585.584000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [17179585.784000] ts: Compaq touchscreen protocol output [17179586.136000] lp0: using parport0 (interrupt-driven). [17179586.180000] skge eth1: enabling interface [17179586.196000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org> [17179586.196000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [17179586.196000] ieee1394: sbp2: Try serialize_io=0 for better performance [17179586.284000] Adding 3036244k swap on /dev/sda5. Priority:-1 extents:1 across:3036244k [17179586.788000] EXT3 FS on sda1, internal journal [17179587.264000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [17179587.264000] md: bitmap version 4.39 [17179587.316000] NET: Registered protocol family 17 [17179588.132000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [17179588.424000] cdrom: open failed. [17179588.856000] cdrom: open failed. [17179588.864000] cdrom: open failed. [17179589.920000] NET: Registered protocol family 10 [17179589.920000] lo: Disabled Privacy Extensions [17179589.920000] ADDRCONF(NETDEV_UP): eth1: link is not ready [17179589.920000] IPv6 over IPv4 tunneling driver [17179594.336000] ACPI: Power Button (FF) [PWRF] [17179594.336000] ACPI: Power Button (CM) [PWRB] [17179594.424000] ibm_acpi: ec object not found [17179594.448000] pcc_acpi: loading... [17179596.632000] ppdev: user-space parallel port driver [17179596.984000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [17179596.984000] apm: overridden by ACPI. [17179599.560000] Bluetooth: Core ver 2.8 [17179599.560000] NET: Registered protocol family 31 [17179599.560000] Bluetooth: HCI device and connection manager initialized [17179599.560000] Bluetooth: HCI socket layer initialized [17179599.584000] Bluetooth: L2CAP ver 2.8 [17179599.584000] Bluetooth: L2CAP socket layer initialized [17179599.600000] Bluetooth: RFCOMM socket layer initialized [17179599.600000] Bluetooth: RFCOMM TTY layer initialized [17179599.600000] Bluetooth: RFCOMM ver 1.7 [17179600.568000] eth0: no IPv6 routers present [17179601.892000] [drm] Initialized drm 1.0.1 20051102 [17179601.900000] **** SET: Misaligned resource pointer: f76449e2 Type 07 Len 0 [17179601.900000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [17179601.900000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 217 [17179601.900000] [drm] Initialized radeon 1.24.0 20060225 on minor 0 [17179602.280000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [17179602.280000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode [17179602.284000] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode [17179602.612000] [drm] Setting GART location based on new memory map [17179602.612000] [drm] Loading R200 Microcode [17179602.616000] [drm] writeback test succeeded in 1 usecs [17180996.196000] hdb: irq timeout: status=0xd0 { Busy } [17180996.196000] ide: failed opcode was: unknown [17180996.196000] hdb: DMA disabled [17180996.292000] hdb: ATAPI reset complete [17181010.008000] UDF-fs: No partition found (1) [17181010.392000] UDF-fs: No partition found (1) [17181010.620000] Unable to identify CD-ROM format. [17181010.816000] Unable to identify CD-ROM format. [17181010.892000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [17181011.152000] FAT: bogus number of reserved sectors [17181011.152000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181011.208000] FAT: bogus number of reserved sectors [17181011.208000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181011.228000] NTFS driver 2.1.25 [Flags: R/O MODULE]. [17181011.280000] NTFS-fs warning (device hdb): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. [17181011.280000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181011.352000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181011.584000] HFS+-fs: unable to find HFS+ superblock [17181011.704000] HFS+-fs: unable to find HFS+ superblock [17181011.768000] VFS: Can't find a HFS filesystem on dev hdb. [17181011.824000] VFS: Can't find a HFS filesystem on dev hdb. [17181012.152000] VFS: Can't find ext3 filesystem on dev hdb. [17181012.212000] VFS: Can't find ext3 filesystem on dev hdb. [17181012.280000] VFS: Can't find an ext2 filesystem on dev hdb. [17181012.340000] VFS: Can't find an ext2 filesystem on dev hdb. [17181012.416000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181012.624000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181012.728000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [17181012.728000] SGI XFS Quota Management subsystem [17181012.836000] XFS: bad magic number [17181012.840000] XFS: SB validate failed [17181012.900000] XFS: bad magic number [17181012.900000] XFS: SB validate failed [17181012.924000] JFS: nTxBlock = 8083, nTxLock = 64665 [17181054.852000] UDF-fs: No partition found (1) [17181055.220000] UDF-fs: No partition found (1) [17181055.412000] Unable to identify CD-ROM format. [17181055.612000] Unable to identify CD-ROM format. [17181055.672000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [17181055.948000] FAT: bogus number of reserved sectors [17181055.948000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181056.004000] FAT: bogus number of reserved sectors [17181056.008000] VFS: Can't find a valid FAT filesystem on dev hdb. [17181056.064000] NTFS-fs warning (device hdb): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. [17181056.064000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181056.124000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size. [17181056.332000] HFS+-fs: unable to find HFS+ superblock [17181056.396000] HFS+-fs: unable to find HFS+ superblock [17181056.452000] VFS: Can't find a HFS filesystem on dev hdb. [17181056.524000] VFS: Can't find a HFS filesystem on dev hdb. [17181056.844000] VFS: Can't find ext3 filesystem on dev hdb. [17181056.904000] VFS: Can't find ext3 filesystem on dev hdb. [17181056.964000] VFS: Can't find an ext2 filesystem on dev hdb. [17181057.028000] VFS: Can't find an ext2 filesystem on dev hdb. [17181057.084000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181057.272000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb [17181057.460000] XFS: bad magic number [17181057.464000] XFS: SB validate failed [17181057.524000] XFS: bad magic number [17181057.524000] XFS: SB validate failed [17192432.400000] ohci_hcd 0000:00:02.0: wakeup [17192432.784000] usb 1-2: new full speed USB device using ohci_hcd and address 2 [17192433.100000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [17192433.100000] usbcore: registered new driver usblp [17192433.100000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [17193209.988000] usb 1-2: USB disconnect, address 2 [17193209.988000] drivers/usb/class/usblp.c: usblp0: removed [17287031.760000] cdrom: open failed. [17287031.772000] cdrom: open failed. [17350265.700000] usb 3-2: new high speed USB device using ehci_hcd and address 3 [17350265.832000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 [17350295.396000] ppdev0: registered pardevice [17350295.444000] ppdev0: unregistered pardevice [17350297.804000] ppdev0: registered pardevice [17350297.852000] ppdev0: unregistered pardevice [17350307.156000] ppdev0: registered pardevice [17350307.208000] ppdev0: unregistered pardevice [17350643.260000] usb 3-2: USB disconnect, address 3 [17350643.260000] drivers/usb/class/usblp.c: usblp0: removed peterhin@GnuLinux02:~$ |
I haven't looked through all that, but, if you've added the line...
Does it work? ;) |
Setting up my DVD and cdrom drives
OK this is the message I got once I tried to open it;
Could not mount device. The reported error was: [mntent]: warning no final newline at the end of /etc/fstab mount: mount point/media/dvdram does not exist |
Ok, go into terminal and type this (as root):
Code:
# mkdir /media/dvdram/ Code:
$ sudo mkdir /media/dvdram/ Now, restart, and let me know what happens :) Cheers |
OK this is what I have now;
Could not mount device. The reported error was: [mntent]: warning: no final newline at the end of /etc/fstab mount: wrong fs type, bad option, bad superblock on /dev/hdb, missing codepage or other error In some case useful info is found in syslog-try dmesg | tail peterhin@GnuLinux02:~$ dmesg |tail [17179602.288000] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode [17179602.608000] [drm] Setting GART location based on new memory map [17179602.608000] [drm] Loading R200 Microcode [17179602.608000] [drm] writeback test succeeded in 1 usecs [17179673.308000] hdb: irq timeout: status=0xd0 { Busy } [17179673.308000] ide: failed opcode was: unknown [17179673.308000] hdb: DMA disabled [17179673.548000] hdb: ATAPI reset complete [17179685.016000] UDF-fs: No partition found (1) [17179686.268000] UDF-fs: No partition found (1) peterhin@GnuLinux02:~$ |
All times are GMT -5. The time now is 08:42 PM. |