|
My Ubutnu 12.04 is crashing as well, after updates
I have the same problem as the guy in a recent thread on this forum. I ran the Update Manager yesterday and installed all the updates. Now when I boot up this morning - the first time since updating - I can only get to the log-in screen, and once I've logged in, the system hangs. Well, it's not exactly hung - I can see the cursor arrow on the screen, and move it about, but the screen is black.
The updates - or one of them - seem to have broken my system, but as this has not happened to me before (I didn't do any updates on my previous Ubuntu install), I am unfamiliar with the procedure to get it all working again. I started Ubuntu on the "failsafe" mode from the Grub menu, but still the same result. There is an option on Grub to boot to the previous kernel version, but that produces the same result. Googling this problem suggest the update may have affected the video drivers, but my video is Intel so I don't use any proprietary drivers that need to be loaded separately. Is there a way I can troubleshoot my system, and thereby fix it? Thank you for any help you can give. Are Ubuntu updates notorious for breaking systems? If so, I won't ever update again... promise! |
You will likely need to use a LiveCD for troubleshooting and changing configs if your system hangs.
It is difficult to determine the problem without additional information. What do your kernel logs say? They would be at /var/log/kern.log. If /var/log/kern.log does not exist then enable it. Edit /etc/rsyslog.conf and make sure that the following line is uncommented (i.e. does not start with a # symbol). Code:
$ModLoad imklog # provides kernel logging support (previously done by rklogd)Code:
kern.* -/var/log/kern.logSAM |
Yes, kern.log is already there. There is a lot of it, from multiple boot-ups, but information from the last unsuccessful boot-up, login and reset is as follows:
Nov 2 10:21:07 steve-MS-7507 kernel: imklog 5.8.6, log source = /proc/kmsg started. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Initializing cgroup subsys cpuset Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Initializing cgroup subsys cpu Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Linux version 3.2.0-32-generic-pae (buildd@roseapple) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #51-Ubuntu SMP Wed Sep 26 21:54:23 UTC 2012 (Ubuntu 3.2.0-32.51-generic-pae 3.2.30) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] KERNEL supported cpus: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Intel GenuineIntel Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] AMD AuthenticAMD Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] NSC Geode by NSC Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Cyrix CyrixInstead Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Centaur CentaurHauls Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Transmeta GenuineTMx86 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Transmeta TransmetaCPU Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] UMC UMC UMC UMC Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-provided physical RAM map: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f7fe000 (reserved) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] NX (Execute Disable) protection: active Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] DMI present. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7507/MS-7507, BIOS V2.2 03/19/2008 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x1000000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] MTRR default type: uncachable Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] MTRR fixed ranges enabled: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 00000-9FFFF write-back Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] A0000-DFFFF uncachable Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] E0000-EFFFF write-through Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] F0000-FFFFF write-protect Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] MTRR variable ranges enabled: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 2 disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 3 disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 4 disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 5 disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 6 disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 7 disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] original variable MTRRs Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] reg 1, base: 2040MB, range: 8MB, type UC Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] total RAM covered: 2040M Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Found optimal setting for mtrr clean up Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] New variable MTRRs Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] reg 1, base: 2040MB, range: 8MB, type UC Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] initial memory mapped : 0 - 02000000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 0000000000 - 0000200000 page 4k Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 0000200000 - 0037a00000 page 2M Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 0037a00000 - 0037bfe000 page 4k Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] RAMDISK: 364ea000 - 3726d000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: RSDP 000f97c0 00014 (v00 ACPIAM) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: RSDT 7f7a0000 00038 (v01 031908 RSDT1136 20080319 MSFT 00000097) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: FACP 7f7a0200 00084 (v01 031908 FACP1136 20080319 MSFT 00000097) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: DSDT 7f7a0440 050F6 (v01 0AAAA 0AAAA000 00000000 INTL 20051117) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: FACS 7f7ae000 00040 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: APIC 7f7a0390 0006C (v01 031908 APIC1136 20080319 MSFT 00000097) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: MCFG 7f7a0400 0003C (v01 031908 OEMMCFG 20080319 MSFT 00000097) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: OEMB 7f7ae040 00071 (v01 031908 OEMB1136 20080319 MSFT 00000097) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: SSDT 7f7ae9e0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 1147MB HIGHMEM available. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 891MB LOWMEM available. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] mapped low ram: 0 - 37bfe000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] low ram: 0 - 37bfe000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Zone PFN ranges: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Normal 0x00001000 -> 0x00037bfe Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] HighMem 0x00037bfe -> 0x0007f7a0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Movable zone start PFN for each node Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] early_node_map[2] active PFN ranges Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f7a0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] On node 0 totalpages: 522031 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] free_area_init_node: node 0, pgdat c1868a80, node_mem_map f54fa200 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] DMA zone: 32 pages used for memmap Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] DMA zone: 0 pages reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Normal zone: 1752 pages used for memmap Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] HighMem zone: 2296 pages used for memmap Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] HighMem zone: 291498 pages, LIFO batch:31 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Using APIC driver default Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: IRQ0 used by override. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: IRQ2 used by override. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] ACPI: IRQ9 used by override. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] nr_irqs_gsi: 40 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Allocating PCI resources starting at 7f7fe000 (gap: 7f7fe000:7f602000) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb9000 s34240 r0 d23104 u57344 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] pcpu-alloc: s34240 r0 d23104 u57344 alloc=14*4096 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic-pae root=UUID=11d973cd-3098-46f9-b053-ff29c5e38b69 ro quiet splash vt.handoff=7 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Initializing CPU#0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] allocated 8354048 bytes of page_cgroup Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f7a0) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Memory: 2038364k/2088576k available (5820k kernel code, 49760k reserved, 2844k data, 740k init, 1175176k highmem) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] virtual kernel memory layout: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] .init : 0xc1877000 - 0xc1930000 ( 740 kB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] .data : 0xc15af13c - 0xc1876280 (2844 kB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] .text : 0xc1000000 - 0xc15af13c (5820 kB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Hierarchical RCU implementation. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] CPU 0 irqstacks, hard=f500a000 soft=f500c000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] vt handoff: transparent VT on vt#7 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Console: colour dummy device 80x25 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] console [tty0] enabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Fast TSC calibration using PIT Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.000000] Detected 2016.613 MHz processor. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4033.22 BogoMIPS (lpj=8066452) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004008] pid_max: default: 32768 minimum: 301 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004033] Security Framework initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004053] AppArmor: AppArmor initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004056] Yama: becoming mindful. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004119] Mount-cache hash table entries: 512 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004272] Initializing cgroup subsys cpuacct Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004279] Initializing cgroup subsys memory Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004288] Initializing cgroup subsys devices Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004291] Initializing cgroup subsys freezer Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004293] Initializing cgroup subsys blkio Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004300] Initializing cgroup subsys perf_event Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004330] CPU: Physical Processor ID: 0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004332] CPU: Processor Core ID: 0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004335] mce: CPU supports 6 MCE banks Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004344] CPU0: Thermal monitoring enabled (TM2) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.004349] using mwait in idle threads. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.006626] ACPI: Core revision 20110623 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.012009] ftrace: allocating 26564 entries in 52 pages Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.016060] Enabling APIC mode: Flat. Using 1 I/O APICs Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.016433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.058318] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] PEBS disabled due to CPU errata. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] ... version: 2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] ... bit width: 40 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] ... generic registers: 2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] ... value mask: 000000ffffffffff Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] ... max period: 000000007fffffff Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] ... fixed-purpose events: 3 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] ... event mask: 0000000700000003 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] CPU 1 irqstacks, hard=f50f2000 soft=f50f4000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] Booting Node 0, Processors #1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.060003] smpboot cpu 1: start_ip = 9b000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.008000] Initializing CPU#1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.148041] NMI watchdog enabled, takes one hw-pmu counter. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.148082] Brought up 2 CPUs Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.148085] Total of 2 processors activated (8009.80 BogoMIPS). Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149041] devtmpfs: initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149041] EVM: security.selinux Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149041] EVM: security.SMACK64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149041] EVM: security.capability Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149041] PM: Registering ACPI NVS region at 7f7ae000 (270336 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149239] print_constraints: dummy: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149270] RTC time: 10:20:46, date: 11/02/12 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149315] NET: Registered protocol family 16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149350] Trying to unpack rootfs image as initramfs... Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149473] EISA bus registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149493] ACPI: bus type pci registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149571] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149575] PCI: not using MMCONFIG Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149706] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149767] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 |
... and continued:
Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.149769] PCI: Using configuration type 1 for base access Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.152619] bio: create slab <bio-0> at 0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.152732] ACPI: Added _OSI(Module Device) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.152735] ACPI: Added _OSI(Processor Device) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.152737] ACPI: Added _OSI(3.0 _SCP Extensions) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.152740] ACPI: Added _OSI(Processor Aggregator Device) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.154074] ACPI: EC: Detected MSI hardware, enabling workarounds. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.154081] ACPI: EC: Look up EC in DSDT Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.155792] ACPI: Executed 1 blocks of module-level executable AML code Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.158643] ACPI: SSDT 7f7ae0c0 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.158981] ACPI: Dynamic OEM Table Load: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.158985] ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20051117) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.159338] ACPI: SSDT 7f7ae550 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.159676] ACPI: Dynamic OEM Table Load: Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.159680] ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20051117) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.160112] ACPI: Interpreter enabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.160136] ACPI: (supports S0 S1 S4 S5) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.160160] ACPI: Using IOAPIC for interrupt routing Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.160191] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.163932] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in ACPI motherboard resources Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.163938] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.163941] PCI: Using MMCONFIG for extended config space Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.170708] ACPI: No dock devices found. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.170713] HEST: Table not found. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.170722] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.170927] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171135] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171139] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171142] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171145] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171147] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xefffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171150] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xffffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171168] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171224] pci 0000:00:02.0: [8086:2772] type 0 class 0x000300 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171237] pci 0000:00:02.0: reg 10: [mem 0xcfd80000-0xcfdfffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171245] pci 0000:00:02.0: reg 14: [io 0xec00-0xec07] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171252] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171260] pci 0000:00:02.0: reg 1c: [mem 0xcfd40000-0xcfd7ffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171342] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171360] pci 0000:00:1b.0: reg 10: [mem 0xcfd3c000-0xcfd3ffff 64bit] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171438] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171443] pci 0000:00:1b.0: PME# disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171466] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171546] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171550] pci 0000:00:1c.0: PME# disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171575] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171655] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171660] pci 0000:00:1c.1: PME# disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171689] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171734] pci 0000:00:1d.0: reg 20: [io 0xe880-0xe89f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171768] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171813] pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171847] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171892] pci 0000:00:1d.2: reg 20: [io 0xe480-0xe49f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171929] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.171973] pci 0000:00:1d.3: reg 20: [io 0xe400-0xe41f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172031] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172054] pci 0000:00:1d.7: reg 10: [mem 0xcfd3bc00-0xcfd3bfff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172146] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172151] pci 0000:00:1d.7: PME# disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172170] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172241] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172336] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172347] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172351] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 00ff) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172399] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172414] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172425] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172436] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172446] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172457] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172496] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172511] pci 0000:00:1f.2: reg 10: [io 0xe080-0xe087] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172521] pci 0000:00:1f.2: reg 14: [io 0xe000-0xe003] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172530] pci 0000:00:1f.2: reg 18: [io 0xdc00-0xdc07] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172539] pci 0000:00:1f.2: reg 1c: [io 0xd880-0xd883] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172549] pci 0000:00:1f.2: reg 20: [io 0xd800-0xd80f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172589] pci 0000:00:1f.2: PME# supported from D3hot Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172593] pci 0000:00:1f.2: PME# disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172610] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172666] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172748] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172822] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172841] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172873] pci 0000:02:00.0: reg 18: [mem 0xcfeff000-0xcfefffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172893] pci 0000:02:00.0: reg 20: [mem 0xcfee0000-0xcfeeffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172907] pci 0000:02:00.0: reg 30: [mem 0xcfbf0000-0xcfbfffff pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172978] pci 0000:02:00.0: supports D1 D2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172981] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.172987] pci 0000:02:00.0: PME# disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180040] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180046] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180051] pci 0000:00:1c.1: bridge window [mem 0xcfb00000-0xcfbfffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180058] pci 0000:00:1c.1: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180132] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180143] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180146] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180149] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180152] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180155] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xefffffff] (subtractive decode) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180158] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180176] pci_bus 0000:00: on NUMA node 0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180755] pci0000:00: Requesting ACPI _OSC control (0x1d) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.180935] pci0000:00: ACPI _OSC control (0x1d) granted |
... and continued:
Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.184786] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.184846] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.184902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.184956] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185011] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185067] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185123] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185181] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185337] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185351] vgaarb: loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185353] vgaarb: bridge control possible 0000:00:02.0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185500] i2c-core: driver [aat2870] using legacy suspend method Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185503] i2c-core: driver [aat2870] using legacy resume method Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185603] SCSI subsystem initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185672] libata version 3.00 loaded. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185731] usbcore: registered new interface driver usbfs Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185752] usbcore: registered new interface driver hub Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185783] usbcore: registered new device driver usb Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185900] PCI: Using ACPI for IRQ routing Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185905] PCI: pci_cache_line_size set to 64 bytes Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185981] reserve RAM buffer: 000000000009fc00 - 000000000009ffff Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.185984] reserve RAM buffer: 000000007f7a0000 - 000000007fffffff Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186111] NetLabel: Initializing Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186114] NetLabel: domain hash size = 128 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186116] NetLabel: protocols = UNLABELED CIPSOv4 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186129] NetLabel: unlabeled traffic allowed by default Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186311] hpet clockevent registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186315] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.186326] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.192087] Switching to clocksource hpet Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202365] AppArmor: AppArmor Filesystem Enabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202403] pnp: PnP ACPI init Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202425] ACPI: bus type pnp registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202568] pnp 00:00: [bus 00-ff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202571] pnp 00:00: [io 0x0cf8-0x0cff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202574] pnp 00:00: [io 0x0000-0x0cf7 window] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202577] pnp 00:00: [io 0x0d00-0xffff window] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202579] pnp 00:00: [mem 0x000a0000-0x000bffff window] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202582] pnp 00:00: [mem 0x000d0000-0x000dffff window] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202585] pnp 00:00: [mem 0x7f800000-0xefffffff window] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202588] pnp 00:00: [mem 0xf4000000-0xffffffff window] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202661] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202673] pnp 00:01: [mem 0xfed13000-0xfed19fff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202731] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202736] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202775] pnp 00:02: [dma 4] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202777] pnp 00:02: [io 0x0000-0x000f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202780] pnp 00:02: [io 0x0081-0x0083] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202782] pnp 00:02: [io 0x0087] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202785] pnp 00:02: [io 0x0089-0x008b] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202787] pnp 00:02: [io 0x008f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202789] pnp 00:02: [io 0x00c0-0x00df] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202823] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202836] pnp 00:03: [io 0x0070-0x0071] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202850] pnp 00:03: [irq 8] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202884] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202895] pnp 00:04: [io 0x0061] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202933] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202944] pnp 00:05: [io 0x00f0-0x00ff]Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202950] pnp 00:05: [irq 13] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.202984] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203271] pnp 00:06: [io 0x03f8-0x03ff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203278] pnp 00:06: [irq 4] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203281] pnp 00:06: [dma 0 disabled] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203364] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203635] pnp 00:07: [io 0x02f8-0x02ff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203642] pnp 00:07: [irq 3] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203644] pnp 00:07: [dma 0 disabled] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.203752] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204263] pnp 00:08: [io 0x0378-0x037f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204272] pnp 00:08: [irq 7] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204275] pnp 00:08: [dma 0 disabled] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204436] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204470] pnp 00:09: [io 0x0060] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204473] pnp 00:09: [io 0x0064] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204479] pnp 00:09: [irq 1] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204528] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204644] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204647] pnp 00:0a: [io 0x0a00-0x0adf] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204650] pnp 00:0a: [io 0x0ae0-0x0aef] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204717] system 00:0a: [io 0x0a00-0x0adf] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204721] system 00:0a: [io 0x0ae0-0x0aef] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204725] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204809] pnp 00:0b: [io 0x0010-0x001f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204812] pnp 00:0b: [io 0x0022-0x002d] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204814] pnp 00:0b: [io 0x0030-0x003f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204816] pnp 00:0b: [io 0x0044-0x005f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204819] pnp 00:0b: [io 0x0062-0x0063] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204821] pnp 00:0b: [io 0x0065-0x006f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204824] pnp 00:0b: [io 0x0072-0x007f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204826] pnp 00:0b: [io 0x0080] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204828] pnp 00:0b: [io 0x0084-0x0086] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204831] pnp 00:0b: [io 0x0088] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204833] pnp 00:0b: [io 0x008c-0x008e] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204836] pnp 00:0b: [io 0x0090-0x009f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204838] pnp 00:0b: [io 0x00a2-0x00bf] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204840] pnp 00:0b: [io 0x00e0-0x00ef] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204843] pnp 00:0b: [io 0x04d0-0x04d1] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204845] pnp 00:0b: [io 0x0800-0x087f] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204848] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204850] pnp 00:0b: [io 0x0480-0x04bf] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204853] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204856] pnp 00:0b: [mem 0xfed20000-0xfed3ffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204858] pnp 00:0b: [mem 0xfed45000-0xfed89fff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204932] system 00:0b: [io 0x04d0-0x04d1] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204936] system 00:0b: [io 0x0800-0x087f] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204939] system 00:0b: [io 0x0480-0x04bf] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204943] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204946] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204950] system 00:0b: [mem 0xfed45000-0xfed89fff] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.204954] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205042] pnp 00:0c: [mem 0xffb80000-0xffbfffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205045] pnp 00:0c: [mem 0xfff80000-0xffffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205086] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205134] pnp 00:0d: [mem 0xffc00000-0xfff7ffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205193] system 00:0d: [mem 0xffc00000-0xfff7ffff] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205197] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205288] pnp 00:0e: [mem 0xfec00000-0xfec00fff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205294] pnp 00:0e: [mem 0xfee00000-0xfee00fff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205351] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205354] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205358] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205409] pnp 00:0f: [mem 0xf0000000-0xf3ffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205468] system 00:0f: [mem 0xf0000000-0xf3ffffff] has been reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205472] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205661] pnp 00:10: [mem 0x00000000-0x0009ffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205664] pnp 00:10: [mem 0x000c0000-0x000cffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205666] pnp 00:10: [mem 0x000e0000-0x000fffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205669] pnp 00:10: [mem 0x00100000-0x7f7fffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205672] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205746] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205750] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205753] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205756] system 00:10: [mem 0x00100000-0x7f7fffff] could not be reserved Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205760] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205908] pnp: PnP ACPI: found 17 devices Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205910] ACPI: ACPI bus type pnp unregistered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.205915] PnPBIOS: Disabled by ACPI PNP Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242628] PCI: max bus depth: 1 pci_try_num: 2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242673] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f800000-0x7f9fffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242678] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7fa00000-0x7fbfffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242683] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242686] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242690] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242696] pci 0000:00:1c.0: bridge window [mem 0x7f800000-0x7f9fffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242701] pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242708] pci 0000:00:1c.1: PCI bridge to [bus 02-02] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242711] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242717] pci 0000:00:1c.1: bridge window [mem 0xcfb00000-0xcfbfffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242722] pci 0000:00:1c.1: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242729] pci 0000:00:1e.0: PCI bridge to [bus 03-03] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242747] pci 0000:00:1c.0: enabling device (0104 -> 0107) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242768] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242774] pci 0000:00:1c.0: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242786] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242791] pci 0000:00:1c.1: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242798] pci 0000:00:1e.0: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242803] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242806] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242809] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242812] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242814] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xefffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242817] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242820] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242823] pci_bus 0000:01: resource 1 [mem 0x7f800000-0x7f9fffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242826] pci_bus 0000:01: resource 2 [mem 0x7fa00000-0x7fbfffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242829] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242832] pci_bus 0000:02: resource 1 [mem 0xcfb00000-0xcfbfffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242835] pci_bus 0000:02: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242838] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242840] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242843] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242846] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242849] pci_bus 0000:03: resource 8 [mem 0x7f800000-0xefffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242852] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.242911] NET: Registered protocol family 2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.243004] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.243286] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.243793] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244190] TCP: Hash tables configured (established 131072 bind 65536) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244195] TCP reno registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244201] UDP hash table entries: 512 (order: 2, 16384 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244216] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244364] NET: Registered protocol family 1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244390] pci 0000:00:02.0: Boot video device Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244435] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244454] pci 0000:00:1d.0: PCI INT A disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244469] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244486] pci 0000:00:1d.1: PCI INT B disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244497] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244514] pci 0000:00:1d.2: PCI INT C disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244522] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244539] pci 0000:00:1d.3: PCI INT D disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244548] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244581] pci 0000:00:1d.7: PCI INT A disabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.244600] PCI: CLS 32 bytes, default 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.245006] audit: initializing netlink socket (disabled) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.245017] type=2000 audit(1351851646.244:1): initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.269258] highmem bounce pool size: 64 pages Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.269264] HugeTLB registered 2 MB page size, pre-allocated 0 pages Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.271734] VFS: Disk quotas dquot_6.5.2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.271822] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.272526] fuse init (API version 7.17) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.272651] msgmni has been set to 1685 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273090] io scheduler noop registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273092] io scheduler deadline registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273102] io scheduler cfq registered (default) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273244] pcieport 0000:00:1c.0: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273293] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273409] pcieport 0000:00:1c.1: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273450] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273591] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273596] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273620] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273623] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273627] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273703] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 1462 ss_did 7507 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273728] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273740] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 1462 ss_did 7507 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273761] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273770] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273871] intel_idle: MWAIT substates: 0x220 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273873] intel_idle: does not run on family 6 model 15 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273975] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.273982] ACPI: Power Button [PWRB] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.274042] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.274046] ACPI: Power Button [PWRF] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.275940] ERST: Table is not found! Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.275943] GHES: HEST is not enabled! Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.276097] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.284089] isapnp: Scanning for PnP cards... Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.296263] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.404106] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.512869] Freeing initrd memory: 13836k freed Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.637152] isapnp: No Plug & Play device found Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.716533] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.752142] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.768323] Linux agpgart interface v0.103 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.768412] agpgart-intel 0000:00:00.0: Intel 945G Chipset Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.768498] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.768795] agpgart-intel 0000:00:00.0: detected 8192K stolen memory Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.768936] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.770776] brd: module loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.771716] loop: module loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.771925] ata_piix 0000:00:1f.1: version 2.13 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.771942] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.771981] ata_piix 0000:00:1f.1: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.772387] scsi0 : ata_piix Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.772488] scsi1 : ata_piix Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.773951] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.773955] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.773983] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.773988] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.774030] ata_piix 0000:00:1f.2: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.774389] scsi2 : ata_piix Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.774473] scsi3 : ata_piix Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.775671] ata3: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.775675] ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776163] Fixed MDIO Bus: probed Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776188] tun: Universal TUN/TAP device driver, 1.6 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776191] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776265] PPP generic driver version 2.4.2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776428] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776449] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776453] ehci_hcd 0000:00:1d.7: EHCI Host Controller Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776511] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776532] ehci_hcd 0000:00:1d.7: using broken periodic workaround Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.776543] ehci_hcd 0000:00:1d.7: debug port 1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.780415] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported |
... and concluded:
Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.780434] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xcfd3bc00 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796199] hub 1-0:1.0: USB hub found Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796205] hub 1-0:1.0: 8 ports detected Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796317] uhci_hcd: USB Universal Host Controller Interface driver Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796345] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796354] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796357] uhci_hcd 0000:00:1d.0: UHCI Host Controller Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796413] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796438] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796589] hub 2-0:1.0: USB hub found Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796594] hub 2-0:1.0: 2 ports detected Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796672] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796680] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796684] uhci_hcd 0000:00:1d.1: UHCI Host Controller Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796735] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796758] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796907] hub 3-0:1.0: USB hub found Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796911] hub 3-0:1.0: 2 ports detected Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796986] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796994] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.796998] uhci_hcd 0000:00:1d.2: UHCI Host Controller Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797049] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797086] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797234] hub 4-0:1.0: USB hub found Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797238] hub 4-0:1.0: 2 ports detected Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797310] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797317] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797321] uhci_hcd 0000:00:1d.3: UHCI Host Controller Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797374] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797408] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797559] hub 5-0:1.0: USB hub found Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797563] hub 5-0:1.0: 2 ports detected Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797694] usbcore: registered new interface driver libusual Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797763] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.797765] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.798484] serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.798621] mousedev: PS/2 mouse device common for all mice Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.798806] rtc_cmos 00:03: RTC can wake from S4 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.798920] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.798944] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799019] device-mapper: uevent: version 1.0.3 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799109] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799148] EISA: Probing bus 0 at eisa.0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799151] EISA: Cannot allocate resource for mainboard Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799154] Cannot allocate resource for EISA slot 1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799156] Cannot allocate resource for EISA slot 2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799158] Cannot allocate resource for EISA slot 3 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799160] Cannot allocate resource for EISA slot 4 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799163] Cannot allocate resource for EISA slot 5 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799165] Cannot allocate resource for EISA slot 6 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799167] Cannot allocate resource for EISA slot 7 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799169] Cannot allocate resource for EISA slot 8 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799171] EISA: Detected 0 cards. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799182] cpufreq-nforce2: No nForce2 chipset. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799185] cpuidle: using governor ladder Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799187] cpuidle: using governor menu Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799189] EFI Variables Facility v0.08 2004-May-17 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799503] TCP cubic registered Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.799651] NET: Registered protocol family 10 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.800345] NET: Registered protocol family 17 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.800350] Registering the dns_resolver key type Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.800373] Using IPI No-Shortcut mode Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.800504] PM: Hibernation image not present or could not be loaded. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.800523] registered taskstats version 1 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.808338] Magic number: 4:510:324 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.808378] tty tty49: hash matches Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.808403] acpi PNP0B00:00: hash matches Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.808441] rtc_cmos 00:03: setting system clock to 2012-11-02 10:20:47 UTC (1351851647) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.808948] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.808951] EDD information not available. Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.817089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.952467] ata1.00: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.952471] ata1.00: 160836480 sectors, multi 16: LBA48 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.952477] ata1.01: ATAPI: DVD-ROM DDU1621, VER S3.1, max UDMA/33 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.976350] ata1.00: configured for UDMA/100 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.992178] ata1.01: configured for UDMA/33 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.992493] scsi 0:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.992638] sd 0:0:0:0: [sda] 160836480 512-byte logical blocks: (82.3 GB/76.6 GiB) Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.992681] sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.992697] sd 0:0:0:0: [sda] Write Protect is off Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.992701] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.992726] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 2 10:21:07 steve-MS-7507 kernel: [ 0.993008] scsi 0:0:1:0: CD-ROM SONY DVD-ROM DDU1621 S3.1 PQ: 0 ANSI: 5 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.008981] sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.008985] cdrom: Uniform CD-ROM driver Revision: 3.20 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.009119] sr 0:0:1:0: Attached scsi CD-ROM sr0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.009202] sr 0:0:1:0: Attached scsi generic sg1 type 5 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.041000] sda: sda1 sda2 sda3 < sda5 sda6 > Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.041503] sd 0:0:0:0: [sda] Attached SCSI disk Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.041585] Freeing unused kernel memory: 740k freed Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.041882] Write protecting the kernel text: 5824k Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.041903] Write protecting the kernel read-only data: 2376k Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.041905] NX-protecting the kernel data: 4416k Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.108054] usb 1-2: new high-speed USB device number 2 using ehci_hcd Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.149052] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.149079] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.149113] r8169 0000:02:00.0: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.149174] r8169 0000:02:00.0: irq 42 for MSI/MSI-X Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.150221] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xf841c000, 00:21:85:0f:9a:f0, XID 1c4000c0 IRQ 42 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.150225] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.244020] Refined TSC clocksource calibration: 2016.522 MHz. Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.244026] Switching to clocksource tsc Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.632018] usb 3-2: new low-speed USB device number 2 using uhci_hcd Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.806210] EXT4-fs (sda5): INFO: recovery required on readonly filesystem Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.806214] EXT4-fs (sda5): write access will be enabled during recovery Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.836399] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input3 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.836547] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2/input0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.836568] usbcore: registered new interface driver usbhid Nov 2 10:21:07 steve-MS-7507 kernel: [ 1.836570] usbhid: USB HID core driver Nov 2 10:21:07 steve-MS-7507 kernel: [ 2.004826] EXT4-fs (sda5): recovery complete Nov 2 10:21:07 steve-MS-7507 kernel: [ 2.008163] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.128253] ADDRCONF(NETDEV_UP): eth0: link is not ready Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.168566] Adding 2086908k swap on /dev/sda6. Priority:-1 extents:1 across:2086908k Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.202430] lp: driver loaded but no devices found Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.242457] [drm] Initialized drm 1.1.0 20060810 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.261981] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.261989] i915 0000:00:02.0: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.287282] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.287285] [drm] Driver supports precise vblank timestamp query. Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.287720] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.336354] [drm] initialized overlay support Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.424111] parport_pc 00:08: reported by Plug and Play ACPI Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.424161] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.435234] intel_rng: FWH not detected Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.439396] type=1400 audit(1351851664.124:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=477 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.439936] type=1400 audit(1351851664.124:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=477 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.440367] type=1400 audit(1351851664.128:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=477 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.446780] leds_ss4200: no LED devices found Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.482979] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.499218] fbcon: inteldrmfb (fb0) is primary device Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.499355] Console: switching to colour frame buffer device 160x64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.499393] fb0: inteldrmfb frame buffer device Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.499396] drm: registered panic notifier Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.499433] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.524487] lp0: using parport0 (interrupt-driven). Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.526825] cfg80211: Calling CRDA to update world regulatory domain Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.557088] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.557147] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.557175] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.604455] hda_codec: ALC888: BIOS auto-probing. Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.611330] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.611524] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.611712] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.611882] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.612091] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.676158] usb 1-2: reset high-speed USB device number 2 using ehci_hcd Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.693519] kjournald starting. Commit interval 5 seconds Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.693564] EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.693843] EXT3-fs (sda2): using internal journal Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.693846] EXT3-fs (sda2): recovery complete Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.694069] EXT3-fs (sda2): mounted filesystem with ordered data mode Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.828699] ppdev: user-space parallel port driver Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.845225] cfg80211: World regulatory domain updated: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.845229] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.845233] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.845236] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.845239] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.845242] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.845245] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848802] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848807] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848810] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848813] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848816] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848819] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848822] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848825] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848827] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848830] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848833] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848836] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848838] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848843] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848846] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848849] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848852] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848857] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848859] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848865] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848868] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848871] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848874] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848877] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848880] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848882] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.848885] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.866687] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.867691] Registered led device: rt2800usb-phy0::radio Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.867746] Registered led device: rt2800usb-phy0::assoc Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.867797] Registered led device: rt2800usb-phy0::quality Nov 2 10:21:07 steve-MS-7507 kernel: [ 17.867848] usbcore: registered new interface driver rt2800usb Nov 2 10:21:07 steve-MS-7507 kernel: [ 20.652931] init: failsafe main process (679) killed by TERM signal Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.030659] Bluetooth: Core ver 2.16 Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.030747] NET: Registered protocol family 31 Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.030750] Bluetooth: HCI device and connection manager initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.030755] Bluetooth: HCI socket layer initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.030758] Bluetooth: L2CAP socket layer initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.030906] Bluetooth: SCO socket layer initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.056529] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.056533] Bluetooth: BNEP filters: protocol multicast Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.072646] Bluetooth: RFCOMM TTY layer initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.072653] Bluetooth: RFCOMM socket layer initialized Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.072656] Bluetooth: RFCOMM ver 1.11 Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.081370] type=1400 audit(1351851667.768:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=782 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.081984] type=1400 audit(1351851667.768:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=782 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.114234] type=1400 audit(1351851667.800:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=799 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.118043] type=1400 audit(1351851667.804:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=800 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.125142] type=1400 audit(1351851667.812:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=800 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.125466] type=1400 audit(1351851667.812:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=800 comm="apparmor_parser" Nov 2 10:21:07 steve-MS-7507 kernel: [ 21.137530] type=1400 audit(1351851667.824:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=801 comm="apparmor_parser" Nov 2 10:21:08 steve-MS-7507 kernel: [ 21.306563] r8169 0000:02:00.0: eth0: link down Nov 2 10:21:08 steve-MS-7507 kernel: [ 21.306754] ADDRCONF(NETDEV_UP): eth0: link is not ready Nov 2 10:21:08 steve-MS-7507 kernel: [ 21.308318] ADDRCONF(NETDEV_UP): eth0: link is not ready Nov 2 10:21:08 steve-MS-7507 kernel: [ 21.656681] ADDRCONF(NETDEV_UP): wlan0: link is not ready Nov 2 10:21:08 steve-MS-7507 kernel: [ 21.686057] ADDRCONF(NETDEV_UP): wlan0: link is not ready Nov 2 10:21:08 steve-MS-7507 kernel: [ 22.201809] init: plymouth-stop pre-start process (1173) terminated with status 1 Nov 2 10:21:11 steve-MS-7507 kernel: [ 25.034498] wlan0: authenticate with c8:d1:5e:d1:28:21 (try 1) Nov 2 10:21:11 steve-MS-7507 kernel: [ 25.036513] wlan0: authenticated Nov 2 10:21:11 steve-MS-7507 kernel: [ 25.041249] wlan0: associate with c8:d1:5e:d1:28:21 (try 1) Nov 2 10:21:11 steve-MS-7507 kernel: [ 25.045531] wlan0: RX AssocResp from c8:d1:5e:d1:28:21 (capab=0x411 status=0 aid=2) Nov 2 10:21:11 steve-MS-7507 kernel: [ 25.045539] wlan0: associated Nov 2 10:21:11 steve-MS-7507 kernel: [ 25.071574] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Nov 2 10:21:20 steve-MS-7507 kernel: [ 33.712537] show_signal_msg: 36 callbacks suppressed Nov 2 10:21:20 steve-MS-7507 kernel: [ 33.712543] gnome-settings-[1670]: segfault at 2e078e73 ip b72451bd sp bfa26f40 error 4 in libgio-2.0.so.0.3200.3[b7153000+153000] Nov 2 10:21:22 steve-MS-7507 kernel: [ 35.952012] wlan0: no IPv6 routers present Nov 2 10:21:47 steve-MS-7507 kernel: Kernel logging (proc) stopped. |
This appears to be a problem.
Code:
Nov 2 10:21:20 steve-MS-7507 kernel: [ 33.712543] gnome-settings-[1670]: segfault at 2e078e73 ip b72451bd sp bfa26f40 error 4 in libgio-2.0.so.0.3200.3[b7153000+153000]Did you enable the unstable repository in 12.04? Have you customized your repositories in any way to get extra features like Adobe Flash, etc? The gnome-settings segfault is from loading the GUI. Try starting your machine by booting into recovery mode (Ubuntu Docs). Do you still get the segfault from starting up without a GUI? SAM |
**UPDATE: Just after I typed the reply below, I booted up again, but at the login screen I selected "Guest" rather than "Steve". And it then loaded normally, full GUI and everything, no problem. So presumably this would imply that the problem is from a setting in my user account, not a system-wide issue.... correct?
Quote:
Is it possible that the updates would have enabled other repositories? I cannot recall any messages during updating asking me about this, although it is entirely possible, as I tend to assume the update manager knows what it is doing. So if it asked "You need to enable XXXX repository in order to do YYYYY, is this okay? Y/N", then I would have said yes by default. Quote:
When I boot up under Recovery mode, I get no different results but there is a menu popping up during boot up (before login). The first item is "resume normal boot", which I choose, but another item is "fix broken packages". **Should I choose "fix broken packages" and see if this does any good?** Quote:
Thank you for your patience so far! My Ubuntu is at least doing something, but I cannot see what it is doing as the GUI seems broken. If the updates had somehow set the resolution to something my monitor could not cope with, then surely I would not be able to see the pointer on the screen either? |
Steve, thank for giving me the heads up on your post, my problem is similar but it is on 12.10. I have started to look at my files using a 12.10 image disk booting from the cd reader.
At least this has given me access to files saved on the computor which I can probably drag and drop to a usb device. Hopefully I will be able to find the logs and pull them out. |
Quote:
|
12.04 crash
Steve, first thing I did was to try the guest option and it worked I can even use my mail. Next step is to try and recover essential files as I think I will reinstall 12.10. I believe if I take the install option it will obliterate the current installation so I need to do some back up by copying files to a USB device or two.
Thanks for your help |
I'm just waiting to see if Sag47 has any advice regarding my latest post above...
|
Quote:
You can now login; note that when prompted for a password, nothing will be shown while typing it; just type the password and press <enter>. My first step would be to run an ls -l in your home directory and check files starting with '.xsess'. I'm not on an Ubuntu system at the moment so can't tell you the exact files to look for. There might be one called '.xsession_error' or so than can be exceptionally big. Alternatively, in recovery mode you can choose 'drop to root shell' (or something with similar name) or 'drop to root shell without networking'. From there you might be able to fix things in your user's home directory; use cd /home/yourusername to navigate to your home directory. Note that you will be root and have all the powers to do unrecoverable damage to your system. |
Yes, there is an .xsession-errors file. It's only one screen big, but to save me having to work out how to copy the file to a memory stick, so as to get it onto this laptop and get it into an LQ post, could you please suggest what kind of errors I would be looking for?
Narrowing this problem down a bit, because I can get "normal service" by logging is as Guest, and it's only when logging is as me that I get a blank screen, then surely the problem lies in a config file in my own /home directory? Can anyone suggest what that file may be, and what edits I may need to do? As Ubuntu uses Gnome 3, could it be a Gnome 3 setting in my home directory causing the problem? When I log on as myself, and get a blank screen (plus a pointer!), I can do Ctrl-Alt-F2 and get a terminal up, and I am in my own /home directory. However the screen resolution is quite high because the text is very small. Is there a command that will display the current screen resolution? I typed in xrandr but it said "Can't open display". By the way, on my system under /etc/X11, there is an xorg.conf.failsafe, but no xorg.conf itself. Is this normal? |
Quote:
Quote:
Quote:
Code:
sudo apt-get install pastebinitQuote:
Quote:
I was away without internet over the weekend which is why my response is so late. I'll review the rest of the posts and address them if need be. SAM |
| All times are GMT -5. The time now is 06:35 PM. |