LinuxQuestions.org
Help answer threads with 0 replies.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > SUSE / openSUSE
Reload this Page Dual Head with a 17 and 15 " TFT
User Name
Password
SUSE / openSUSE This Forum is for the discussion of Suse Linux.

Notices


Reply
  Search this Thread
Old 04-02-2007, 06:39 PM   #1
Spraygun
LQ Newbie
 
Registered: Mar 2007
Location: Hannover/Germany
Distribution: openSUSE
Posts: 18

Rep: Reputation: 0
Dual Head with a 17 and 15 " TFT

Hi,

I want o do a Xinerama with a 15 and a 17" TFT problem is
the 17 " screams for a 1280x1024 resolution
while the 15" wants a 1024x768.

I tried a bit with Sax2 but the only possible combination was that both run on 1024x768.
But I dont want that so I played a bit with the xorg.conf without Sax2 help.

This is my current xorg.conf
Code:
Section "Monitor"
  DisplaySize  337 270
  HorizSync    30-83
  Identifier   "Monitor[0]"
  ModelName    "YM17NPX"
  VendorName   "FAC"
  VertRefresh  50-77
  UseModes     "Modes[1]"
EndSection

Section "Modes"
  Identifier   "Modes[1]"
  Modeline 	"1280x1024" 106.97 1280 1360 1496 1712 1024 1025 1028 1059
  Modeline 	"1280x1024" 87.75 1280 1328 1360 1440 1024 1027 1034 1053 +HSync -Vsync
  Modeline 	"1280x960" 107.32 1280 1360 1496 1712 960 961 964 995
  Modeline 	"1280x960" 88.25 1280 1328 1360 1440 960 963 967 989 +HSync -Vsync
  Modeline 	"1280x800" 107.21 1280 1360 1496 1712 800 801 804 835
  Modeline 	"1280x800" 98.89 1280 1352 1488 1696 800 801 804 833
  Modeline 	"1280x800" 91.61 1280 1352 1488 1696 800 801 804 831
  Modeline 	"1280x800" 88.25 1280 1328 1360 1440 800 803 809 829 +HSync -Vsync
  Modeline 	"1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
  Modeline 	"1152x864" 107.91 1152 1224 1352 1552 864 865 868 903
  Modeline 	"1152x864" 98.61 1152 1224 1344 1536 864 865 868 900
  Modeline 	"1152x864" 90.48 1152 1224 1344 1536 864 865 868 897
  Modeline 	"1152x864" 89.25 1152 1200 1232 1312 864 867 871 896 +HSync -Vsync
  Modeline 	"1280x768" 105.85 1280 1360 1496 1712 768 769 772 803
  Modeline 	"1280x768" 96.79 1280 1352 1488 1696 768 769 772 800
  Modeline 	"1280x768" 88.87 1280 1352 1488 1696 768 769 772 798
  Modeline 	"1280x768" 87.00 1280 1328 1360 1440 768 771 778 796 +HSync -Vsync
  Modeline 	"1024x768" 85.08 1024 1088 1200 1376 768 769 772 803
  Modeline 	"1024x768" 77.61 1024 1080 1192 1360 768 769 772 800
  Modeline 	"1024x768" 71.50 1024 1072 1104 1184 768 771 775 796 +HSync -Vsync
  Modeline 	"1024x768" 71.27 1024 1080 1192 1360 768 769 772 798
  Modeline 	"1280x600" 81.24 1280 1344 1480 1680 600 601 604 628
  Modeline 	"1280x600" 74.31 1280 1336 1472 1664 600 601 604 626
  Modeline 	"1280x600" 68.00 1280 1328 1360 1440 600 603 613 622 +HSync -Vsync
  Modeline 	"1280x600" 67.53 1280 1336 1464 1648 600 601 604 624
  Modeline 	"1024x600" 64.99 1024 1080 1184 1344 600 601 604 628
  Modeline 	"1024x600" 59.30 1024 1072 1176 1328 600 601 604 626
  Modeline 	"1024x600" 55.75 1024 1072 1104 1184 600 603 613 622 +HSync -Vsync
  Modeline 	"1024x600" 54.42 1024 1072 1176 1328 600 601 604 624
  Modeline 	"800x600" 51.06 800 840 928 1056 600 601 604 628
  Modeline 	"800x600" 46.44 800 840 920 1040 600 601 604 626
  Modeline 	"800x600" 45.25 800 848 880 960 600 603 607 622 +HSync -Vsync
  Modeline 	"800x600" 42.62 800 840 920 1040 600 601 604 624
  Modeline 	"768x576" 46.80 768 808 888 1008 576 577 580 603
  Modeline 	"768x576" 42.53 768 800 880 992 576 577 580 601
  Modeline 	"768x576" 42.00 768 816 848 928 576 579 583 597 +HSync -Vsync
  Modeline 	"768x576" 39.02 768 800 880 992 576 577 580 599
  Modeline 	"640x480" 31.54 640 664 728 816 480 481 484 502
  Modeline 	"640x480" 30.25 640 688 720 800 480 483 487 498 +HSync -Vsync
  Modeline 	"640x480" 29.16 640 664 728 816 480 481 484 501
  Modeline 	"640x480" 26.74 640 664 728 816 480 481 484 499
  Modeline 	"1024x768" 66.33 1024 1080 1184 1344 768 769 772 796
  Modeline 	"1024x600" 50.60 1024 1064 1168 1312 600 601 604 622
  Modeline 	"800x600" 39.49 800 832 912 1024 600 601 604 622
  Modeline 	"768x576" 36.13 768 792 872 976 576 577 580 597
  Modeline 	"640x480" 24.70 640 656 720 800 480 481 484 498
EndSection

Section "Modes"
  Identifier   "Modes[0]"
  Modeline 	"1024x768" 64.11 1024 1080 1184 1344 768 769 772 795
  Modeline 	"1024x768" 55.00 1024 1072 1104 1184 768 771 775 790 +HSync -Vsync
  Modeline 	"1024x600" 48.96 1024 1064 1168 1312 600 601 604 622
  Modeline 	"1024x600" 43.00 1024 1072 1104 1184 600 603 613 619 +HSync -Vsync
  Modeline 	"800x600" 38.22 800 832 912 1024 600 601 604 622
  Modeline 	"800x600" 34.75 800 848 880 960 600 603 607 617 +HSync -Vsync
  Modeline 	"768x576" 34.96 768 792 872 976 576 577 580 597
  Modeline 	"768x576" 32.25 768 816 848 928 576 579 583 593 +HSync -Vsync
  Modeline 	"640x480" 23.86 640 656 720 800 480 481 484 497
  Modeline 	"640x480" 23.25 640 688 720 800 480 483 487 494 +HSync -Vsync
  Modeline 	"1024x768" 66.33 1024 1080 1184 1344 768 769 772 796
  Modeline 	"1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
  Modeline 	"1024x600" 50.60 1024 1064 1168 1312 600 601 604 622
  Modeline 	"800x600" 39.49 800 832 912 1024 600 601 604 622
  Modeline 	"768x576" 36.13 768 792 872 976 576 577 580 597
  Modeline 	"640x480" 24.70 640 656 720 800 480 481 484 498
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1280x1024" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1280x1024" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1280x1024" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1280x1024" "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection

Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1024x768" "1024x600" "800x600" "768x576" "640x480" 
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[1]"
  Monitor      "Monitor[0]"
EndSection

Section "Device"
  BoardName    "RV280 5960"
  BusID        "1:0:0"
  Driver       "radeon"
  Identifier   "Device[0]"
  Option       "SaXDualHead"
  Option       "IgnoreEDID"
  Option       "MergedFB"
  Option       "SaXDualDisplaySize" "298-238"
  Option       "SaXDualMonitorVendor" "--> VESA"
  Option       "SaXDualVSync" "50-60"
  Option       "CRT2Position" "RightOf"
  Option       "CRT2VRefresh" "50-60"
  Option       "MetaModes" "1024x768,1024x768;1024x600,1024x600;800x600,800x600;768x576,768x576;640x480,640x480"
  Option       "UseModes" "Modes[0]"
  Option       "SaXDualOrientation" "RightOf"
  Option       "SaXDualResolution" "1024x768"
  Option       "SaXDualMode" "Xinerama"
  Option       "CRT2HSync" "31-50"
  Option       "SaXDualHSync" "31-50"
  Option       "SaXDualMonitorModel" "1024X768@60HZ"
  Screen       0
  VendorName   "ATI"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "off"
  Option       "Xinerama" "on"
  Screen       "Screen[0]"
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection
Does not work, the 15 " is the SaXDualMonitor but it runs with the 17" Size although i told it not to use.
So I get a totaly wrong picture
I manually filled in the screen 1 section in order to hae a special section for the 15" Monitor, but it does not comunicate with it.
As well as the Modes[1] section. I inserted it for the 17" because the 15" screen stopped working properly after i added the 1280x1024 resolution to the Modes[0] section.


Thanks for your help
 
Old 04-02-2007, 09:01 PM   #2
GrapefruiTgirl
LQ Guru
 
Registered: Dec 2006
Location: underground
Distribution: Slackware64
Posts: 7,594

Rep: Reputation: 556Reputation: 556Reputation: 556Reputation: 556Reputation: 556Reputation: 556
Code:
Section "ServerLayout"
    Identifier  "Xinerama dual X-screens"
    Screen 0    "Screen0"  0 0
    Screen 1    "Screen1"  1600 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath  "/usr/X11R6/lib/X11/rgb"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
    FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
EndSection

Section "Module"
    Load  "dbe"
    Load  "extmod"
    Load  "type1"
    Load  "freetype"
    Load  "glx"
    Load  "fbdevhw"
    Load  "record"
#   Load  "v4l"
EndSection

Section "ServerFlags"
    Option "Xinerama" "1"
#   Option "RandR" "On"
EndSection

Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/psaux"
    Option "ZAxisMapping" "4 5"
EndSection

#   KDS Monitor:
Section "Monitor"
    Identifier "Monitor0"
    VendorName "KDS Corp"
    ModelName  "Proview"
    HorizSync   30.0 - 86.0
    VertRefresh 50.0 - 160.0
    Option "DPMS"
EndSection

#   Television:
Section "Monitor"
    Identifier "Monitor1"
    VendorName "General Electric"
    ModelName  "TV"
    HorizSync   30.0 - 50.0
    VertRefresh 60.0
EndSection

Section "Device"
    Identifier "i810"
    Driver     "i810"
    VendorName "Intel"
    BoardName  "i854G/PE"
    BusID "PCI:00:10:0"
EndSection

Section "Device"
    Identifier "Videocard0"
    Driver     "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName  "NV18 GeForce4 MX 440 with AGP8X"
    BusID      "PCI:01:00:0"
    Screen 0
EndSection

Section "Device"
    Identifier "Videocard1"
    Driver     "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName  "NV18 GeForce4 MX 440 with AGP8X"
    BusID      "PCI:01:00:0"
    Screen 1
EndSection

# KDS Monitor:
Section "Screen"
    Identifier "Screen0"
    Device  "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option  "XVideo" "On"
    Option  "RenderAccel" "On"
    Option  "HWcursor" "On"
#   Option  "AddARGBGLXVisuals" "True"
    Option  "AllowGLXWithComposite" "True"
    Option  "DamageEvents" "True"
    Option  "metamodes" "CRT: 1600x1200 +0+0"
  SubSection "Display"
    Depth 24
    Modes "1600x1200" "1280x1024" "1024x768"
  EndSubSection
EndSection

# Television:
Section "Screen"
    Identifier "Screen1"
    Device  "Videocard1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option  "XVideo" "On"
    Option  "RenderAccel" "On"
    Option  "HWcursor" "On"
#   Option  "AddARGBGLXVisuals" "True"
    Option  "AllowGLXWithComposite" "True"
    Option  "DamageEvents" "True"
    Option  "TVStandard" "NTSC-M"
    Option  "TVOutFormat" "COMPOSITE"
    Option  "metamodes" "TV: nvidia-auto-select +0+0"
  SubSection "Display"
    Depth 24
    Modes "1600x1200" "1280x1024" "1024x768" "800x600"
  EndSubSection
EndSection
Try adjusting this file where necessary, like change the nvidia driver to yours, change the PCI BusID to correct it for yours (this is for ONE nvidia dual head card---ignore/delete the intel device), insert your horiz and vert rates for your monitors, and your modelines, instead of 'nvidia auto select', will be like:
for screen 1:
modes "1280x1024,1024x768"
and screen two like this:
modes "1024x768,1280x1024"

I think that's all... OH - and in the server layout, change the 1600 to 1280.
Hope this helps you but if it doesn't work quite right, ask again
 
Old 04-03-2007, 01:15 AM   #3
Spraygun
LQ Newbie
 
Registered: Mar 2007
Location: Hannover/Germany
Distribution: openSUSE
Posts: 18

Original Poster
Rep: Reputation: 0
Hey thanks for your xorg.conf

I played a bit with it.

Code:
# /.../
# SaX generated X11 config file
# Created on: 2007-04-04T00:51:34+0200.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/share/fonts/misc:unscaled"
  FontPath     "/usr/share/fonts/local"
  FontPath     "/usr/share/fonts/75dpi:unscaled"
  FontPath     "/usr/share/fonts/100dpi:unscaled"
  FontPath     "/usr/share/fonts/Type1"
  FontPath     "/usr/share/fonts/URW"
  FontPath     "/usr/share/fonts/Speedo"
  FontPath     "/usr/share/fonts/PEX"
  FontPath     "/usr/share/fonts/cyrillic"
  FontPath     "/usr/share/fonts/latin2/misc:unscaled"
  FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/Type1"
  FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/share/fonts/baekmuk:unscaled"
  FontPath     "/usr/share/fonts/japanese:unscaled"
  FontPath     "/usr/share/fonts/kwintv"
  FontPath     "/usr/share/fonts/truetype"
  FontPath     "/usr/share/fonts/uni:unscaled"
  FontPath     "/usr/share/fonts/CID"
  FontPath     "/usr/share/fonts/ucs/misc:unscaled"
  FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/misc:unscaled"
  FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/Type1"
  FontPath     "/usr/share/fonts/misc/sgi:unscaled"
  FontPath     "/usr/share/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  FontPath     "unix/:7100"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
EndSection

Section "ServerFlags"
  Option       "Xinerama" "1"
  Option       "AllowMouseOpenFail" "on"
EndSection

Section "Module"
  Load         "glx"
  Load         "type1"
  Load         "extmod"
  Load         "dbe"
  Load         "freetype"
  Load         "v4l"
  Load         "dri"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "de"
  Option       "XkbRules" "xfree86"
  Option       "XkbVariant" "nodeadkeys"
EndSection


Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "AutoSoft" "on"
  Option       "Device" "/dev/input/mice"
  Option       "Emulate3Buttons" "on"
  Option       "Name" "<undefined>"
  Option       "Protocol" "Auto"
  Option       "Vendor" "Sysp"
EndSection


Section "Monitor"
  DisplaySize  337 270
  HorizSync    30-83
  Identifier   "Monitor[0]"
  ModelName    "YM17NPX"
  VendorName   "FAC"
  VertRefresh  50-77
EndSection

Section "Monitor"
  DisplaySize  298 238
  HorizSync    31-50
  Identifier   "Monitor[1]"
  ModelName    "1024X768@60HZ"
  VendorName   "15Zoll"
  VertRefresh  50-60
EndSection

#17"er
Section "Screen"
    Identifier "Screen0"
    Device  "Device[0]"
    Monitor "Monitor[0]"
    DefaultDepth 24
    Option  "XVideo" "On"
    Option  "RenderAccel" "On"
    Option  "HWcursor" "On"
#   Option  "AddARGBGLXVisuals" "True"
    Option  "AllowGLXWithComposite" "True"
    Option  "DamageEvents" "True"
    Option  "metamodes" "1280x1024,1280x1024;1024x768,1024x768;800x600,800x600"
  SubSection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600"
  EndSubSection
EndSection

#15"er
Section "Screen"
    Identifier "Screen1"
    Device  "Device[1]"
    Monitor "Monitor[1]"
    DefaultDepth 24
    Option  "XVideo" "On"
    Option  "RenderAccel" "On"
    Option  "HWcursor" "On"
#   Option  "AddARGBGLXVisuals" "True"
#   Option  "AllowGLXWithComposite" "True"
    Option  "DamageEvents" "True"
    Option  "metamodes" "1024x768,1024x768;800x600,800x600"
  SubSection "Display"
    Depth 24
    Modes  "1024x768" "800x600"
  EndSubSection
EndSection

Section "Device"
  BoardName    "RV280 5960"
  BusID        "1:0:0"
  Driver       "radeon"
  Identifier   "Device[0]"
#  Option       "IgnoreEDID"
#  Option       "MergedFB"
  Screen       0
  VendorName   "ATI"
EndSection

Section "Device"
  BoardName    "RV280 5960"
  BusID        "1:0:0"
  Driver       "radeon"
  Identifier   "Device[1]"
#  Option       "IgnoreEDID"
#  Option       "MergedFB"
  Screen       1
  VendorName   "ATI"
EndSection

Section "ServerLayout"
  Identifier   "Xinerama dul X-Screens"
  Screen       "Screen0"
  Screen       "Screen1"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection
With this Configuration i have the 17" on the left side, I can use mouse and keyboard here.
On the 15" however I do have a complete other users I think.
The K-menu is not visible but i can see the bar itself. The only desktop Icon is the trash-can
Funny ^^
Oh the Option "Xinerama" is set off because if it is on it simply clones my 17" desktop to the 15" god knows why.
 
Old 04-03-2007, 02:46 AM   #4
Spraygun
LQ Newbie
 
Registered: Mar 2007
Location: Hannover/Germany
Distribution: openSUSE
Posts: 18

Original Poster
Rep: Reputation: 0
Ok I worked alot on it and now my conf is almost perfect, exactly what i wanted, much better than the normal Xinerama
You're great, thanks a lot

There are still are some bugs showing the picture.
I hope i can figure them out but i guess that is because of the missing ATI fglrx driver.
Anyway thank you very very much for your help.


Edit: One last thing, do you (or anybody else) know if it is possible to put a window from desktop1 to desktop2
ATM it is not possible

Thanks
Last edited by Spraygun; 04-03-2007 at 04:06 AM.
 
Old 04-03-2007, 08:27 AM   #5
GrapefruiTgirl
LQ Guru
 
Registered: Dec 2006
Location: underground
Distribution: Slackware64
Posts: 7,594

Rep: Reputation: 556Reputation: 556Reputation: 556Reputation: 556Reputation: 556Reputation: 556
Regarding your second-to-last post:
You *might* be getting a cloned desktop because you are not specifying the location of the second screen. That's what the x and y coordinates in the server layout are for.
Ya could try:
Code:
Screen 0    "Screen0"  0 0
Screen 1    "Screen1"  1024 0
and use Xinerama, but add a line to server flags or somewhere:
Code:
Option "clone" "0"
if necessary.

Sounds like you are experiencing ONE desktop being stretched across both screens, because of the Trash icon being on the other screen. The way mine works is my main screen has the taskbar and K-menu, while the second screen has neither--it's just a screen, with no controls.
You should be able to mouse from one screen to the other by going off the right or left edge of the screen, and also; what do you mean by "A window from Desktop 1 to Desktop 2" ??
 
Old 04-03-2007, 11:23 AM   #6
Spraygun
LQ Newbie
 
Registered: Mar 2007
Location: Hannover/Germany
Distribution: openSUSE
Posts: 18

Original Poster
Rep: Reputation: 0
Hi, sorry I forgot to post my current xorg.conf, i changed it a bit

Code:
# /.../
# SaX generated X11 config file
# Created on: 2007-04-04T00:51:34+0200.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/share/fonts/misc:unscaled"
  FontPath     "/usr/share/fonts/local"
  FontPath     "/usr/share/fonts/75dpi:unscaled"
  FontPath     "/usr/share/fonts/100dpi:unscaled"
  FontPath     "/usr/share/fonts/Type1"
  FontPath     "/usr/share/fonts/URW"
  FontPath     "/usr/share/fonts/Speedo"
  FontPath     "/usr/share/fonts/PEX"
  FontPath     "/usr/share/fonts/cyrillic"
  FontPath     "/usr/share/fonts/latin2/misc:unscaled"
  FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/Type1"
  FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/share/fonts/baekmuk:unscaled"
  FontPath     "/usr/share/fonts/japanese:unscaled"
  FontPath     "/usr/share/fonts/kwintv"
  FontPath     "/usr/share/fonts/truetype"
  FontPath     "/usr/share/fonts/uni:unscaled"
  FontPath     "/usr/share/fonts/CID"
  FontPath     "/usr/share/fonts/ucs/misc:unscaled"
  FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/misc:unscaled"
  FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/Type1"
  FontPath     "/usr/share/fonts/misc/sgi:unscaled"
  FontPath     "/usr/share/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  FontPath     "unix/:7100"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
EndSection

Section "ServerFlags"
#  Option       "Xinerama" "1"
  Option       "AllowMouseOpenFail" "on"
EndSection

Section "Module"
  Load         "glx"
  Load         "type1"
  Load         "extmod"
  Load         "dbe"
  Load         "freetype"
  Load         "v4l"
  Load         "dri"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard0"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "de"
  Option       "XkbRules" "xfree86"
  Option       "XkbVariant" "nodeadkeys"
EndSection


Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse0"
  Option       "AutoSoft" "on"
  Option       "Device" "/dev/input/mice"
  Option       "Emulate3Buttons" "on"
  Option       "Name" "<undefined>"
  Option       "Protocol" "Auto"
  Option       "Vendor" "Sysp"
EndSection

Section "ServerLayout"
    Identifier  "Xinerama dual X-screens"
    Screen 0    "Screen0"  0 0
    Screen 1    "Screen1"  1280 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
EndSection

# 17 Zoll: 
Section "Monitor" 
    Identifier "Monitor0" 
    VendorName "YM17NPX" 
    ModelName "FAC" 
    HorizSync 30.0 - 83.0 
    VertRefresh 50.0 - 77.0 
    Option "DPMS" 
EndSection

# 15zoll: 
Section "Monitor" 
    Identifier "Monitor1" 
    VendorName "15Zoll" 
    ModelName "15Zoller" 
    HorizSync 31.0 - 50.0
    VertRefresh 50.-60.0 
EndSection

Section "Device"
    Identifier "Videocard0"
    Driver     "radeon"
    VendorName "ATI"
    BoardName  "RV280 5960"
    BusID      "1:0:0"
    Screen 0
EndSection

Section "Device"
    Identifier "Videocard1"
    Driver     "radeon"
    VendorName "ATI"
    BoardName  "RV280 5960"
    BusID      "1:0:0"
    Screen 1
EndSection

# 17Zoll:
Section "Screen"
    Identifier "Screen0"
    Device  "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option  "XVideo" "On"
    Option  "RenderAccel" "On"
    Option  "HWcursor" "On"
#   Option  "AddARGBGLXVisuals" "True"
    Option  "AllowGLXWithComposite" "True"
    Option  "DamageEvents" "True"
    Option  "metamodes" "1280x1024 +0+0"
  SubSection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600"
  EndSubSection
EndSection

# 15Zoll:
Section "Screen"
    Identifier "Screen1"
    Device  "Videocard1"
    Monitor "Monitor1"
    DefaultDepth 24
    Option  "XVideo" "On"
    Option  "RenderAccel" "On"
    Option  "HWcursor" "On"
#   Option  "AddARGBGLXVisuals" "True"
    Option  "AllowGLXWithComposite" "True"
    Option  "DamageEvents" "True"
    Option  "metamodes" "1024x768 +0+0"
  SubSection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600"
  EndSubSection
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection
For any reason it now is like i have two X-Server clients.

My 17" shows the normal stuff i had before.

The 15" however is like im being logged in as another person. Its got all the features as Desktop1
Taskbar aswell. In the second desktop were 4 Workspaces when it opened first time.
My normal Desktop got only 2.

In my home/user are now two Desktop Icons "Desktop" and "Desktop1"

I can drag and drop as much text as I want but cant bring a window from one to another.

If I open amarok i.e its systray-icon is only shown in the taskbar where i opened it and it is impossible to put the window to the Desktop where i did not open it.

I kind of like this Like it is now i can switch on and off the 2nd TFT as i need it, only the window things are curios. But normal i guess as there are 2 desktop links

Thanks

Sorry if this is confusing, i can send screenshots if it helps

EDIT: I think I just found the reason why I have two different Desktop Clients
I # the line Xinerama 1 in the server flags section.
oopps, still like it how it is now but i think i will try it with Xinerama on aswell
Last edited by Spraygun; 04-03-2007 at 11:39 AM.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Digimate 17" TFT with NVidia graphics - keep getting "signal out of range" vasudevadas Linux - Hardware 3 12-03-2006 06:22 PM
Dual-head with X: Second (VIA) Head Dead Dria Linux - Hardware 2 11-26-2006 10:55 AM
Multi-monitor Issues on RH9, Geforce 4 Ti Dual Head + TNT2 Single Head the letter b Linux - Newbie 3 12-04-2004 11:23 PM
"Dual Head" with ATi Radeon 9700 objorkum Linux - Software 6 10-28-2004 05:21 AM
x86 Solaris 9 XSun and Matrox G550 dual-head... one head down, one to go. finegan Solaris / OpenSolaris 4 03-11-2003 12:39 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > SUSE / openSUSE

All times are GMT -5. The time now is 05:55 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration