Configuring Network card in Suse 9.3, both set to eth-id:00 ??
I have a MSI K8N MOBO with dual nics on it. I can't connect to the intetnet or even ping anything outside my router. When I try to ping a website, it says "destination host unreachable"
When I go to the "network card configuration overview" the device column list the Nic's ID's as:
It seems to me that these can't be right. How can I have 2 cards with ethid:00? There is no place inthe configure menu to change the ID's either.
I then went to the YaST Control Center -> Hardware Info -> Network Card
It list 2 cards here and when I look at the device names, they are listed as eth0 and eht1 (which is what I would think it should be..?) I looked through the different's property fields of the cards and everything seemed to be listed as "active"
There was one difference that I noticed (don't know if it matters or not).
On eth0 -> Resources, there were the following fields listed: Hardware address, IO, irq, link, mem. On Eth1, there is no link in the resources field.
If there is any other information that I can provide to help solve this problem, let me know. This is extremely frustrating and I would love to try out SuSE!
BTW I have the firewalls turned off as well.
Thanks in advance!