LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Suse/Novell
User Name
Password
Suse/Novell This Forum is for the discussion of Suse Linux.

Notices

Reply
 
Search this Thread
Old 11-08-2005, 02:16 AM   #1
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Rep: Reputation: 31
ATI driver & SUSE 10.0


Hi,
an interesting thing happened. Two weeks ago, I have installed ATI fglrx driver on my comp. That day everything worked as it must work. Next day there was no more fglrx but Mesa driver. I have less than 800frames when running glxgears. This moment i was checking fglrxinfo and what a surprise, I have ATI drivers back and my glxgears are:

bgorjup@linux:~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 1.3.5395 (X4.3.0-8.18.8)

bgorjup@linux:~> glxgears
8827 frames in 5.0 seconds = 1765.400 FPS
9995 frames in 5.0 seconds = 1999.000 FPS
9996 frames in 5.0 seconds = 1999.200 FPS
9996 frames in 5.0 seconds = 1999.200 FPS
9995 frames in 5.0 seconds = 1999.000 FPS
9996 frames in 5.0 seconds = 1999.200 FPS
9995 frames in 5.0 seconds = 1999.000 FPS
9913 frames in 5.0 seconds = 1982.600 FPS
9931 frames in 5.0 seconds = 1986.200 FPS

What I did was a synaptic update/upgrade checking and there were some files to update. I do not remember now which files were that. The result is as above. Weird isn't it??

Last edited by riba43; 11-08-2005 at 02:18 AM.
 
Old 11-08-2005, 03:37 AM   #2
TigerLinux
Senior Member
 
Registered: Sep 2005
Location: Kuala Lumpur, Malaysia
Distribution: Ubuntu 11.04
Posts: 1,731

Rep: Reputation: 30
Quote:
I have installed ATI fglrx driver on my comp
Can u tell me where to get fglrx ?
 
Old 11-08-2005, 03:43 AM   #3
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Original Poster
Rep: Reputation: 31
I have used this site:

http://www.susewiki.org/index.php?ti...r_Installation
 
Old 11-08-2005, 05:49 AM   #4
TigerLinux
Senior Member
 
Registered: Sep 2005
Location: Kuala Lumpur, Malaysia
Distribution: Ubuntu 11.04
Posts: 1,731

Rep: Reputation: 30
Thank you, it is very helpful.
 
Old 11-08-2005, 09:15 AM   #5
RedShirt
Senior Member
 
Registered: Oct 2005
Location: Denver
Distribution: Sabayon 3.5Loop2
Posts: 1,150

Rep: Reputation: 45
If you want a more detailed, and in my opinion better ordered site, which also explains how to get the files a little better, try mine, or just the ATI official "New Installation Instructions."
 
Old 11-09-2005, 04:09 AM   #6
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Original Poster
Rep: Reputation: 31
Well it really is strange. Today, after switching on my com p the same thing happened again. Mesa drivers came back. FGLRX drivers were there in my system. I checked with YAST. So I completely removed and install them again. They are working now.

bgorjup@linux:~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 1.3.5395 (X4.3.0-8.18.8)

9191 frames in 5.0 seconds = 1838.200 FPS
10125 frames in 5.0 seconds = 2025.000 FPS
10123 frames in 5.0 seconds = 2024.600 FPS
10124 frames in 5.0 seconds = 2024.800 FPS
10122 frames in 5.0 seconds = 2024.400 FPS
10122 frames in 5.0 seconds = 2024.400 FPS

Is there a way how to disable Mesa drivers or how to change this "automatic" changes between both of them??

 
Old 11-09-2005, 07:07 AM   #7
RedShirt
Senior Member
 
Registered: Oct 2005
Location: Denver
Distribution: Sabayon 3.5Loop2
Posts: 1,150

Rep: Reputation: 45
When it reverted, what did the XOrg.conf look like? Was it the same file?

Was everything else still configured right?

I can think only that maybe something reverted, and you may have to find and delete mesa files... That part though, I am not sure if it is a great idea, or exactly which ones you would need to. Maybe we can take a look at your config, and check the dmesg for instances of it trying to load the ATI or whether it just loaded the mesas right away.
 
Old 11-09-2005, 07:40 AM   #8
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Original Poster
Rep: Reputation: 31
Hi RedShirt,

Thank you for helping me. I am not very familiar with reading the files and making some conclusions from them (I am still noob regarding Linux), but here is a part of my dmesg file( I will check my config now):


Bootdata ok (command line is root=/dev/hda3 vga=0x31a selinux=0 resume=/dev/h
da2 splash=silent showopts)
Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (p
rerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
BIOS-e820: 000000001ffc0000 - 000000001ffd0000 (ACPI data)
BIOS-e820: 000000001ffd0000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f9cb0
ACPI: RSDT (v001 A M I OEMRSDT 0x07000501 MSFT 0x00000097) @ 0x000000001ffc000
0
ACPI: FADT (v002 A M I OEMFACP 0x07000501 MSFT 0x00000097) @ 0x000000001ffc020
0
ACPI: MADT (v001 A M I OEMAPIC 0x07000501 MSFT 0x00000097) @ 0x000000001ffc039
0
ACPI: OEMB (v001 A M I OEMBIOS 0x07000501 MSFT 0x00000097) @ 0x000000001ffd004
0
ACPI: DSDT (v001 A0055 A0055003 0x00000003 INTL 0x02002026) @ 0x000000000000000
0
On node 0 totalpages: 130911
DMA zone: 3999 pages, LIFO batch:1
Normal zone: 126912 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
Nvidia board detected. Ignoring ACPI timer override.
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Checking aperture...
CPU 0: aperture @ e0000000 size 256 MB
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=0x31a selinux=0 resume=/dev/hda2 spl
ash=silent showopts
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 1980.134 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 507900k/524032k available (2290k kernel code, 15256k reserved, 825k data
, 176k init)
Calibrating delay using timer specific routine.. 3964.41 BogoMIPS (lpj=7928824)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 00
checking if image is initramfs... it is
ACPI: Looking for DSDT in initrd... not found!
not found!
Using local APIC timer interrupts.
Detected 13.750 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *7
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
agpgart: Detected AGP bridge 0
agpgart: Setting up Nforce3 AGP.
agpgart: AGP aperture is 256M @ 0xe0000000
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:0b.0
IO window: 9000-9fff
MEM window: ff300000-ff3fffff
PREFETCH window: 9eb00000-deafffff
PCI: Bridge: 0000:00:0e.0
IO window: a000-bfff
MEM window: ff400000-ff5fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:0e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1131526104.668:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20000180000, using 10240k, t
otal 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=101
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 by
tes,<6>...found (1280x1024, 17839 bytes, v3).
Console: switching to colour frame buffer device 158x59
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 8192 (order: 4, 65536 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
NET: Registered protocol family 1
ACPI wakeup devices:
PS2K PS2M UAR1 UAR2 USB0 MAC USB1 USB2 P0P1
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 176k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SCSI subsystem initialized
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
hda: WDC WD800JB-00ETA0, ATA DISK drive
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
hdb: MAXTOR 6L040J2, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 78177792 sectors (40027 MB) w/1820KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
hdb: hdb1
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
libata version 1.12 loaded.
sata_nv version 0.6
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ
177
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xC800 irq 177
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xC808 irq 177
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
sata_sil version 0.9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ
185
ata3: SATA max UDMA/100 cmd 0xFFFFC20000020C80 ctl 0xFFFFC20000020C8A bmdma 0xFF
FFC20000020C00 irq 185
ata4: SATA max UDMA/100 cmd 0xFFFFC20000020CC0 ctl 0xFFFFC20000020CCA bmdma 0xFF
FFC20000020C08 irq 185
Losing some ticks... checking if CPU frequency changed.
ata5: SATA max UDMA/100 cmd 0xFFFFC20000020E80 ctl 0xFFFFC20000020E8A bmdma 0xFF
FFC20000020E00 irq 185
ata6: SATA max UDMA/100 cmd 0xFFFFC20000020EC0 ctl 0xFFFFC20000020ECA bmdma 0xFF
FFC20000020E08 irq 185
ata3: no device found (phy stat 00000000)
scsi2 : sata_sil
ata4: no device found (phy stat 00000000)
scsi3 : sata_sil
ata5: no device found (phy stat 00000000)
scsi4 : sata_sil
ata6: no device found (phy stat 00000000)
scsi5 : sata_sil
ACPI: CPU0 (power states: C1[C1])
Attempting manual resume
swsusp: Suspend partition has wrong signature?
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
bootsplash: status on console 0 changed to on
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding 1012084k swap on /dev/hda2. Priority:-1 extents:1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff803cf000(lo)
IPv6 over IPv4 tunneling driver
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 21 (level, low) -> IRQ
193
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 193, io mem 0xff6fd000
ip6_tables: (C) 2000-2002 Netfilter core team
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 20 (level, low) -> IRQ
201
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.1: irq 201, io mem 0xff6fe000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 22 (level, low) -> IRQ
177
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 177, io mem 0xff6ffc00
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LKLN] -> GSI 21 (level, low) -> IRQ
193
PCI: Setting latency timer of device 0000:00:05.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
usb 3-1: new high speed USB device using ehci_hcd and address 2
ip_tables: (C) 2000-2002 Netfilter core team
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:05.0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI-0212: *** Warning: Device is not power manageable
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 20 (level, low) -> IRQ
201
PCI: Setting latency timer of device 0000:00:06.0 to 64
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 304 bytes per conntrack
ohci_hcd 0000:00:02.1: wakeup
Linux video capture interface: v1.00
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
intel8x0_measure_ac97_clock: measured 54703 usecs
intel8x0: clocking to 46888
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ
209
saa7134[0]: found at 0000:02:07.0, rev: 1, irq: 209, latency: 64, mmio: 0xff5ffc
00
saa7134[0]: subsystem: 153b:1158, board: Terratec Cinergy 600 TV MK3 [card=48,au
todetected]
saa7134[0]: board init: gpio is 50000
saa7134[0]: registered input device for IR
ieee1394: Initialized config rom entry `ip1394'
saa7134[0]: i2c eeprom 00: 3b 15 58 11 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
usb 2-2: new full speed USB device using ohci_hcd and address 2
: chip found @ 0xc0 (saa7134[0])
: All bytes are equal. It is not a TEA5767
tuner 2-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
tda9885/6/7: chip found @ 0x86
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ
209
PCI: Via IRQ fixup for 0000:02:0b.0, from 10 to 1
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[209] MMIO=[ff5ff000-ff5ff7ff] Ma
x Packet=[2048]
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr
oto 2 vid 0x04B8 pid 0x0005
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800008984f4]
it87: Found IT8712F chip at 0xd00, revision 7
bootsplash: status on console 0 changed to on
NET: Registered protocol family 17
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: CPU0 not a capable Intel processor
microcode: No new microcode data for CPU0
IA-32 Microcode Update Driver v1.14 unregistered
bootsplash: status on console 0 changed to on
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)
ACPI-0071: *** Warning: Invalid 'package' argument
ACPI-0285: *** Warning: Invalid _PSS data
powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x2 (1500 mV)
cpu_init done, current fid 0xa, vid 0x2
subfs 0.9
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
subfs: unsuccessful attempt to mount media (256)
bootsplash: status on console 0 changed to on
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100 DST=224.0.0.251 LEN=10
7 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
eth0: no IPv6 routers present
fglrx: module not supported by Novell, setting U taint flag.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERM
ANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 425 MBytes.
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 17 (level, low) -> IRQ
217
[fglrx] module loaded - fglrx 8.18.8 [Oct 25 2005] on minor 0
[fglrx] Kernel AGP support doesn't provide agplock functionality.
[fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[fglrx] free AGP = 256126976
[fglrx] max AGP = 256126976
[fglrx] free LFB = 116387840
[fglrx] max LFB = 116387840
[fglrx] free Inv = 134217728
[fglrx] max Inv = 134217728
[fglrx] total Inv = 134217728
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 65536
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100 DST=224.0.0.251 LEN=10
7 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100 DST=224.0.0.251 LEN=10
 
Old 11-09-2005, 08:27 AM   #9
RedShirt
Senior Member
 
Registered: Oct 2005
Location: Denver
Distribution: Sabayon 3.5Loop2
Posts: 1,150

Rep: Reputation: 45
Code:
agpgart: Setting up Nforce3 AGP.
That should mean you are using an nforce3 chipset motherboard, is that accurate?
Code:
fglrx: module not supported by Novell, setting U taint flag.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERM
ANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 425 MBytes.
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 17 (level, low) -> IRQ
217
[fglrx] module loaded - fglrx 8.18.8 [Oct 25 2005] on minor 0
[fglrx] Kernel AGP support doesn't provide agplock functionality.
[fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[fglrx] free AGP = 256126976
[fglrx] max AGP = 256126976
[fglrx] free LFB = 116387840
[fglrx] max LFB = 116387840
[fglrx] free Inv = 134217728
[fglrx] max Inv = 134217728
[fglrx] total Inv = 134217728
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 65536
You may be using the Kernel's built in agpgart. I wonder if you are using the correct one, for nvidia chipsets(this is based on your chipset, not the graphics card.) From my website(and ATI's instructions.)
Quote:
# To find out which AGP controller your motherboard uses, issue the following command: lspci | grep AGP
# To find a list of AGP related kernel modules installed on your machine, issue the following command and look for a module (*.ko file) that suits your AGP Controller: ls /lib/modules/`uname -r`/kernel/drivers/char/agp
# Use the modprobe command (as root) to load the module. For example: On a motherboard using a VIA� AGP Controller, you would load the via-agp.ko using modprobe as follows (notice that the trailing .ko is omitted): modprobe via-agp. Check the modprobe manpage for more information on loading kernel modules.
# To verify that the AGP module is already loaded, run lsmod as root. With the X server running and the connection established, the usage count of this module must be greater than zero.
After that last line in your dmesg is probably more about fglrx, can we see that too?

Last edited by RedShirt; 11-09-2005 at 08:28 AM.
 
Old 11-09-2005, 09:45 AM   #10
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Original Poster
Rep: Reputation: 31
Hi RedShirt,

here is my
linux:/home/bgorjup # lspci | grep AGP
00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
linux:/home/bgorjup #
and the rest of dmesg

FW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100 DST=224.0.0.251 LEN=10
7 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100 DST=224.0.0.251 LEN=10
7 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xb0
NET: Registered protocol family 4
ax25: module not supported by Novell, setting U taint flag.
NET: Registered protocol family 3
NET: Registered protocol family 5
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.100 DST=224.0.0.251 LEN=10
7 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=65.54.179.192 DST=192.168.0.100 LEN=119 TOS=0x00 PREC=0x00 TTL=105 ID=2
5548 DF PROTO=TCP SPT=443 DPT=14467 WINDOW=17267 RES=0x00 ACK PSH URGP=0 OPT (01
01080A0003CFEDFFFF3B50)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
50768 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=64843 RES=0x00 ACK URGP=0 OPT (0101
080A00011964FFFF67A0)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
53861 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=64568 RES=0x00 ACK URGP=0 OPT (0101
080A00011A9CFFFF8614)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
54468 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=64542 RES=0x00 ACK PSH URGP=0 OPT (
0101080A00011AD5FFFF8B97)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=83.23.255.191 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=112 ID=
33257 DF PROTO=TCP SPT=7000 DPT=16171 WINDOW=64451 RES=0x00 ACK URGP=0 OPT (0101
080A00069333FFFF9AE3)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
56721 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=65449 RES=0x00 ACK URGP=0 OPT (0101
080A00011BACFFFFA0A1)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=83.23.255.191 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=112 ID=
42377 DF PROTO=TCP SPT=7000 DPT=16171 WINDOW=65362 RES=0x00 ACK URGP=0 OPT (0101
080A000695D5FFFFDCC6)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
1414 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=64538 RES=0x00 ACK URGP=0 OPT (01010
80A00011FA700000415)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=83.23.255.191 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=112 ID=
49282 DF PROTO=TCP SPT=7000 DPT=16171 WINDOW=64927 RES=0x00 ACK URGP=0 OPT (0101
080A000697DD00000F70)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=83.23.255.191 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=112 ID=
50031 DF PROTO=TCP SPT=7000 DPT=16171 WINDOW=64922 RES=0x00 ACK URGP=0 OPT (0101
080A0006981D0000159F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=83.23.255.191 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=112 ID=
53625 DF PROTO=TCP SPT=7000 DPT=16171 WINDOW=64745 RES=0x00 ACK URGP=0 OPT (0101
080A0006994A000032E7)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
7132 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=65377 RES=0x00 ACK URGP=0 OPT (01010
80A0001222300004237)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
9068 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=65214 RES=0x00 ACK URGP=0 OPT (01010
80A000122F7000056B4)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
10659 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=65025 RES=0x00 ACK URGP=0 OPT (0101
080A000123A100006777)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
11032 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=65008 RES=0x00 ACK PSH URGP=0 OPT (
0101080A000123C400006AFC)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=83.23.255.191 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=112 ID=
62293 DF PROTO=TCP SPT=7000 DPT=16171 WINDOW=65479 RES=0x00 ACK PSH URGP=0 OPT (
0101080A00069C1000007827)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=62.44.226.126 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=107 ID=
14935 DF PROTO=TCP SPT=16881 DPT=8420 WINDOW=64618 RES=0x00 ACK URGP=0 OPT (0101
080A0001256300009378)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=83.23.255.191 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=112 ID=
1514 DF PROTO=TCP SPT=7000 DPT=16171 WINDOW=65212 RES=0x00 ACK URGP=0 OPT (01010
80A00069D8300009CF2)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=24521 DF PROTO=TCP SPT=4194 DPT=80 WINDOW=2047 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000258E3832436D1)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=48227 DF PROTO=TCP SPT=4198 DPT=80 WINDOW=1752 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000258E4832436D0)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=38620 DF PROTO=TCP SPT=4196 DPT=80 WINDOW=1746 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000258E4832436D1)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=36808 DF PROTO=TCP SPT=4190 DPT=80 WINDOW=2103 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000258E4832436D1)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=63826 DF PROTO=TCP SPT=4186 DPT=80 WINDOW=4431 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000258E6832436D0)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=177
2 DF PROTO=TCP SPT=80 DPT=4194 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=177
3 DF PROTO=TCP SPT=80 DPT=4198 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=177
4 DF PROTO=TCP SPT=80 DPT=4196 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=177
5 DF PROTO=TCP SPT=80 DPT=4190 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=177
6 DF PROTO=TCP SPT=80 DPT=4186 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=63838 DF PROTO=TCP SPT=4186 DPT=80 WINDOW=4431 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000272BD832436D0)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=184
9 DF PROTO=TCP SPT=80 DPT=4186 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=63840 DF PROTO=TCP SPT=4186 DPT=80 WINDOW=4431 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00028CFD832436D0)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=190
3 DF PROTO=TCP SPT=80 DPT=4186 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=24535 DF PROTO=TCP SPT=4194 DPT=80 WINDOW=2047 RES=0x00 ACK
FIN URGP=0 OPT (0101080A000294EA832436D1)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=191
3 DF PROTO=TCP SPT=80 DPT=4194 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=63842 DF PROTO=TCP SPT=4186 DPT=80 WINDOW=4431 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0002C17D832436D0)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=195
5 DF PROTO=TCP SPT=80 DPT=4186 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=36824 DF PROTO=TCP SPT=4190 DPT=80 WINDOW=2103 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0002CE6E832436D1)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=196
2 DF PROTO=TCP SPT=80 DPT=4190 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=67.15.187.219 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=24537 DF PROTO=TCP SPT=4194 DPT=80 WINDOW=2047 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0002D16A832436D1)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=67.15.187.219 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=47 ID=196
3 DF PROTO=TCP SPT=80 DPT=4194 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:08:00
SRC=193.189.160.11 DST=192.168.0.100 LEN=127 TOS=0x00 PREC=0x00 TTL=251 ID=6340
1 DF PROTO=UDP SPT=53 DPT=1233 LEN=107
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=193.189.160.11 DST=192.168.0.100 LEN=127 TOS=0x00 PREC=0x00 TTL=251 ID=
63401 DF PROTO=UDP SPT=53 DPT=1233 LEN=107
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=193.189.160.48 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=60 ID=
6706 DF PROTO=TCP SPT=110 DPT=1571 WINDOW=25460 RES=0x00 ACK URGP=0 OPT (0101080
AB85135E1001BF29A)
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:08:00
SRC=193.189.160.11 DST=192.168.0.100 LEN=115 TOS=0x00 PREC=0x00 TTL=251 ID=4958
5 DF PROTO=UDP SPT=53 DPT=1313 LEN=95
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=193.189.160.11 DST=192.168.0.100 LEN=115 TOS=0x00 PREC=0x00 TTL=251 ID=
49585 DF PROTO=UDP SPT=53 DPT=1313 LEN=95
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=50 ID=4
3746 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=1448 RES=0x00 ACK URGP=0 OPT (0101080A
160E42960022C8DB)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=204.152.191.7 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=41 ID=1
7414 DF PROTO=TCP SPT=26486 DPT=17219 WINDOW=1448 RES=0x00 ACK URGP=0 OPT (01010
80ADD13131600234F58)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=212.201.44.24 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=280 DF PROTO=TCP SPT=21229 DPT=80 WINDOW=16736 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0023676F160FB67B)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=134.76.11.100 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31571 DF PROTO=TCP SPT=13521 DPT=80 WINDOW=1728 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00236770087575AB)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=134.76.11.100 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31573 DF PROTO=TCP SPT=13521 DPT=80 WINDOW=1728 RES=0x00 ACK
FIN URGP=0 OPT (0101080A002367AF087575AB)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=134.76.11.100 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31575 DF PROTO=TCP SPT=13521 DPT=80 WINDOW=1728 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0023682D087575AB)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=561
44 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=134.76.11.100 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31577 DF PROTO=TCP SPT=13521 DPT=80 WINDOW=1728 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00236929087575AB)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=561
45 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=561
47 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=212.201.44.24 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=286 DF PROTO=TCP SPT=21229 DPT=80 WINDOW=16736 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00238100160FB67B)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=561
50 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=212.201.44.24 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=288 DF PROTO=TCP SPT=21229 DPT=80 WINDOW=16736 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00239E38160FB67B)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=561
52 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=134.76.11.100 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=31587 DF PROTO=TCP SPT=13521 DPT=80 WINDOW=1728 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0023A631087575AB)
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=212.201.44.24 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=290 DF PROTO=TCP SPT=21229 DPT=80 WINDOW=16736 RES=0x00 ACK
FIN URGP=0 OPT (0101080A0023D8A8160FB67B)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=561
62 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=212.201.44.24 LEN=52 TOS=0x00
PREC=0x00 TTL=64 ID=292 DF PROTO=TCP SPT=21229 DPT=80 WINDOW=16736 RES=0x00 ACK
FIN URGP=0 OPT (0101080A00244D88160FB67B)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=212.201.44.24 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=50 ID=561
70 DF PROTO=TCP SPT=80 DPT=21229 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=64.179.4.149 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=48 ID=37
003 DF PROTO=TCP SPT=80 DPT=23388 WINDOW=6479 RES=0x00 ACK URGP=0 OPT (0101080A9
3B4A51E0027B607)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=193.189.160.234 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=124 I
D=57276 DF PROTO=TCP SPT=80 DPT=19512 WINDOW=65535 RES=0x00 ACK URGP=0 OPT (0101
080A014DA888003E0960)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=66.249.93.99 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=51 ID=45
500 PROTO=TCP SPT=80 DPT=29693 WINDOW=6720 RES=0x00 ACK URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=80.15.238.7 LEN=52 TOS=0x00 PR
EC=0x00 TTL=64 ID=5384 DF PROTO=TCP SPT=29260 DPT=80 WINDOW=8428 RES=0x00 ACK FI
N URGP=0 OPT (0101080A004FDD426458C72F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=80.15.238.7 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF
PROTO=TCP SPT=80 DPT=29260 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=80.15.238.7 LEN=52 TOS=0x00 PR
EC=0x00 TTL=64 ID=5386 DF PROTO=TCP SPT=29260 DPT=80 WINDOW=8428 RES=0x00 ACK FI
N URGP=0 OPT (0101080A004FDD7F6458C72F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=80.15.238.7 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF
PROTO=TCP SPT=80 DPT=29260 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=80.15.238.7 LEN=52 TOS=0x00 PR
EC=0x00 TTL=64 ID=5388 DF PROTO=TCP SPT=29260 DPT=80 WINDOW=8428 RES=0x00 ACK FI
N URGP=0 OPT (0101080A004FDDF96458C72F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=80.15.238.7 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF
PROTO=TCP SPT=80 DPT=29260 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=80.15.238.7 LEN=52 TOS=0x00 PR
EC=0x00 TTL=64 ID=5390 DF PROTO=TCP SPT=29260 DPT=80 WINDOW=8428 RES=0x00 ACK FI
N URGP=0 OPT (0101080A004FDEED6458C72F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0
8:00 SRC=80.15.238.7 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF
PROTO=TCP SPT=80 DPT=29260 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=80.15.238.7 LEN=52 TOS=0x00 PR EC=0x00 TTL=64 ID=5392 DF PROTO=TCP SPT=29260 DPT=80 WINDOW=8428 RES=0x00 ACK FI N URGP=0 OPT (0101080A004FE0D56458C72F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0 8:00 SRC=80.15.238.7 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=TCP SPT=80 DPT=29260 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=80.15.238.7 LEN=52 TOS=0x00 PR EC=0x00 TTL=64 ID=5398 DF PROTO=TCP SPT=29260 DPT=80 WINDOW=8428 RES=0x00 ACK FI N URGP=0 OPT (0101080A004FFB856458C72F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0 8:00 SRC=80.15.238.7 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=TCP SPT=80 DPT=29260 WINDOW=0 RES=0x00 RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth0 SRC=192.168.0.100 DST=80.15.238.7 LEN=52 TOS=0x00 PR EC=0x00 TTL=64 ID=5400 DF PROTO=TCP SPT=29260 DPT=80 WINDOW=8428 RES=0x00 ACK FI N URGP=0 OPT (0101080A00501A056458C72F)
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0 8:00 SRC=80.15.238.7 DST=192.168.0.100 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=0 DF PROTO=TCP SPT=80 DPT=29260 WINDOW=0 RES=0x00 RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth0 OUT= MAC=00:e0:18:99:88:77:00:30:4f:39:b8:ba:0 8:00 SRC=64.179.4.149 DST=192.168.0.100 LEN=1392 TOS=0x00 PREC=0x00 TTL=48 ID=62 764 DF PROTO=TCP SPT=80 DPT=6131 WINDOW=6633 RES=0x00 ACK URGP=0 OPT (0101080A93 CF2A7F006A04D5)
linux:/home/bgorjup #

and

inux:/home/bgorjup # ls /lib/modules/`uname -r`/kernel/drivers/char/agp
/bin/ls: /lib/modules/2.6.13-15-default/kernel/drivers/char/agp: No such file or directory
linux:/home/bgorjup #




Last edited by riba43; 11-09-2005 at 09:50 AM.
 
Old 11-09-2005, 09:51 AM   #11
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Original Poster
Rep: Reputation: 31
and here is lsmod:

linux:/home/bgorjup # lsmod
Module Size Used by
appletalk 42064 2
ax25 72232 2
ipx 31568 2
fglrx 286748 7
nls_utf8 2688 0
ipt_pkttype 2176 1
hfsplus 85640 0
ipt_LOG 8064 7
ipt_limit 2944 7
subfs 9600 1
cpufreq_ondemand 8108 1
cpufreq_userspace 5828 0
cpufreq_powersave 2304 0
powernow_k8 11792 0
freq_table 5512 1 powernow_k8
snd_pcm_oss 70432 0
snd_mixer_oss 22144 1 snd_pcm_oss
snd_seq 68824 0
snd_seq_device 11024 1 snd_seq
button 8736 0
battery 12296 0
ac 6664 0
edd 12448 0
af_packet 25356 2
it87 27040 0
eeprom 9232 0
i2c_sensor 3968 2 it87,eeprom
i2c_isa 2944 0
ip6t_REJECT 6528 3
ipt_REJECT 6656 3
ipt_state 2432 12
usblp 15488 0
iptable_mangle 3584 0
floppy 73792 0
iptable_nat 28120 0
tda9887 15376 0
tuner 41384 0
iptable_filter 3712 1
ohci1394 36684 0
ieee1394 118648 1 ohci1394
saa7134 130516 0
ip6table_mangle 2944 0
crc_ccitt 2560 0
isdn 154592 0
slhc 8192 1 isdn
video_buf 27012 1 saa7134
v4l2_common 8192 1 saa7134
v4l1_compat 13956 1 saa7134
ir_common 9860 1 saa7134
videodev 12544 1 saa7134
ip_conntrack 51572 2 ipt_state,iptable_nat
ip_tables 22528 8 ipt_pkttype,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter
snd_intel8x0 40000 1
snd_ac97_codec 117060 1 snd_intel8x0
snd_ac97_bus 3328 1 snd_ac97_codec
snd_pcm 117260 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 29320 2 snd_seq,snd_pcm
snd 77600 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 11808 2 saa7134,snd
snd_page_alloc 13200 2 snd_intel8x0,snd_pcm
i2c_nforce2 8576 0
i2c_core 25752 8 it87,eeprom,i2c_sensor,i2c_isa,tda9887,tuner,saa7134,i2c_nforce2
generic 5892 0 [permanent]
shpchp 101032 0
pci_hotplug 31720 1 shpchp
forcedeth 22144 0
ip6table_filter 3456 1
ehci_hcd 36744 0
ip6_tables 21120 3 ip6t_REJECT,ip6table_mangle,ip6table_filter
ohci_hcd 22916 0
usbcore 140724 4 usblp,ehci_hcd,ohci_hcd
ipv6 289024 15 ip6t_REJECT
parport_pc 44912 0
lp 14336 0
parport 43532 2 parport_pc,lp
nls_iso8859_1 5760 2
nls_cp437 7424 2
vfat 15872 2
fat 58032 1 vfat
dm_mod 65648 0
reiserfs 267120 1
fan 6152 0
thermal 17932 0
processor 28368 2 powernow_k8,thermal
sata_sil 11780 0
ide_cd 45984 0
cdrom 40888 1 ide_cd
sata_nv 11396 0
libata 57608 2 sata_sil,sata_nv
amd74xx 16048 0 [permanent]
sd_mod 20760 0
scsi_mod 161976 2 libata,sd_mod
ide_disk 19584 6
ide_core 158616 4 generic,ide_cd,amd74xx,ide_disk
linux:/home/bgorjup #
 
Old 11-09-2005, 09:52 AM   #12
RedShirt
Senior Member
 
Registered: Oct 2005
Location: Denver
Distribution: Sabayon 3.5Loop2
Posts: 1,150

Rep: Reputation: 45
dmesg is okay... it was just that one section then. Did you have to reset your AGPGART or was it set as that nvidia nforce3 already? Your dmesg says it loaded another one, so if it is saying it is okay, but is actually loading the nvidia, it means something is really odd.

Try rebooting again(if you can) and seeing if it sticks now. Was it a once happenstance or repeated happening?
 
Old 11-09-2005, 10:08 AM   #13
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Original Poster
Rep: Reputation: 31
No I did nothing to my AGPGART. It seems it was set like this and yes it is being repeated. It is working now but it probably will not tomorrow when i switch on my comp. I have switched my system a few times now and it is still ok You know, I was not checking every day if it is ATI or Mesa. But now I will. I am not a game player so it is of no importance for me, but I would like to know why is this happening and if there is some solution to resolve the problem.

My motherboard is: ASUS K8N-E Deluxe and graphic card HIS Excalibur 9700,

regards

Last edited by riba43; 11-09-2005 at 10:10 AM.
 
Old 11-09-2005, 10:49 AM   #14
RedShirt
Senior Member
 
Registered: Oct 2005
Location: Denver
Distribution: Sabayon 3.5Loop2
Posts: 1,150

Rep: Reputation: 45
If you would, when/if it reverts again, also double check the settings before you set about fixing it, see if it is the Conf that is losing settings. Perhaps...and this is just a thought, you have an old .conf which is backing up part fo the new, correct one. My bet lies somethig in that kind of realm, or that sax2 is overriding part or all of the ati Xorg.conf.
 
Old 11-10-2005, 01:55 AM   #15
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Original Poster
Rep: Reputation: 31
Hi RedShirt,

This morning when I started my comp ATI drivers are still there. I will check my config files when they revert again.

Thank you for helping me.

regards
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
NSTALL ATI DRIVER & SUSE 10.0 RC1 64BIT - Works! ChrisJCline Suse/Novell 1 11-01-2005 05:28 PM
ATI fglrx driver & SUSE 10.0 RC1 riba43 Suse/Novell 2 09-15-2005 11:23 PM
Kernel 2.6.7, xorg6.7, & ATI 3.14.6 driver HOW-TO gotmonkey Slackware 3 12-19-2004 08:29 PM
How to make sound works on FreeBSD & mount extended partition & ATI radeon driver Ninja_212 *BSD 3 11-02-2004 06:36 AM
whats the big deal? ATI driver & SuSE arrruken Linux - Distributions 0 03-25-2004 10:08 PM


All times are GMT -5. The time now is 11:04 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration