LinuxQuestions.org
Review your favorite Linux distribution.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Other *NIX Forums > Solaris / OpenSolaris
Reload this Page Solaris 10 in parallele with Centos and windows XP
User Name
Password
Solaris / OpenSolaris This forum is for the discussion of Solaris, OpenSolaris, OpenIndiana, and illumos.
General Sun, SunOS and Sparc related questions also go here. Any Solaris fork or distribution is welcome.

Notices


Reply
Page 1 of 2 1 2
  Search this Thread
Old 10-29-2006, 01:08 AM   #1
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Rep: Reputation: 15
Solaris 10 in parallele with Centos and windows XP

Hy every body

I would like to install SOLARIS 10 in my box which has already windows XP installed in one HDD1, and Centos 4.4 installed in another HDD2.

I want to install SOLARIS 10 in the HDD2 (parallel with Centos).

Is it possible?
How to do it without affecting Centos or Windows XP?

In fact my problem reside in the space that i should allocate to SOLARIS since actually Centos is occupying the totality of the HDD2 (20GB).

How to resize the space allocated for Centos in order to be able to install SOLARIS 10, if this is acceptable of course?

Thanks a lot.

red
Last edited by hermouche; 10-29-2006 at 01:10 AM.
 
Old 10-29-2006, 01:36 AM   #2
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.4, Oracle Linux, Mint, Debian/WSL
Posts: 9,789

Rep: Reputation: 492Reputation: 492Reputation: 492Reputation: 492Reputation: 492
You certainly can install Solaris in a multi-boot configuration along with Windows and Linux. This is in fact a quite common setup and has been discussed many times in this forum. The main point is Solaris requires a primary partition and is installing a specific release of grub.

Concerning your Centos shrinking issue, you'd rather ask for advice in a Linux specific forum like "Linux - General". I would suggest you to split the disk in two 10 GB partitions.
 
Old 10-29-2006, 04:57 AM   #3
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by jlliagre
You certainly can install Solaris in a multi-boot configuration along with Windows and Linux. This is in fact a quite common setup and has been discussed many times in this forum. The main point is Solaris requires a primary partition and is installing a specific release of grub.

Concerning your Centos shrinking issue, you'd rather ask for advice in a Linux specific forum like "Linux - General". I would suggest you to split the disk in two 10 GB partitions.

It means that i should format the HDD2, split it into two partitions and then after intall Centos in one partition and Solaris in the other partition.

Is that correct?

thanks jlliagre

red
Last edited by hermouche; 10-29-2006 at 05:00 AM.
 
Old 10-29-2006, 05:24 AM   #4
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.4, Oracle Linux, Mint, Debian/WSL
Posts: 9,789

Rep: Reputation: 492Reputation: 492Reputation: 492Reputation: 492Reputation: 492
If you don't mind reinstalling CentOS, and loosing current work you may have done with it, that is indeed a way to go.

In any case, install Solaris after other O/Ses.
 
Old 10-29-2006, 06:05 AM   #5
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by jlliagre
If you don't mind reinstalling CentOS, and loosing current work you may have done with it, that is indeed a way to go.

In any case, install Solaris after other O/Ses.

OK, i will format, then install Centos in one partition and then at last Solaris.

Hope it works!!

I will resume here the result.

Bye

red
 
Old 10-29-2006, 08:09 AM   #6
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.4, Oracle Linux, Mint, Debian/WSL
Posts: 9,789

Rep: Reputation: 492Reputation: 492Reputation: 492Reputation: 492Reputation: 492
What precisely Solaris 10 release are you going to install ?
 
Old 10-29-2006, 09:06 AM   #7
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by jlliagre
What precisely Solaris 10 release are you going to install ?
I am planning to install the solaris 10 6/06 Operating System for the x86 platform, then after i will install the companion DVD.

Is this OK?

This will be my first attempt installing solaris, so i am not sure that i will succeed!!


red
Last edited by hermouche; 10-29-2006 at 09:11 AM.
 
Old 10-29-2006, 10:10 AM   #8
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.4, Oracle Linux, Mint, Debian/WSL
Posts: 9,789

Rep: Reputation: 492Reputation: 492Reputation: 492Reputation: 492Reputation: 492
You can check if your hardware is supported with a recently released java application, Sun Device Detection Tool, which runs under windows and linux:

http://www.sun.com/bigadmin/hcl/hcts/device_detect.html

There is also the installation check tool there:

http://www.sun.com/bigadmin/hcl/hcts/install_check.html
 
Old 10-29-2006, 12:05 PM   #9
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
Ok
Quote:
Originally Posted by jlliagre
You can check if your hardware is supported with a recently released java application, Sun Device Detection Tool, which runs under windows and linux:

http://www.sun.com/bigadmin/hcl/hcts/device_detect.html

There is also the installation check tool there:

http://www.sun.com/bigadmin/hcl/hcts/install_check.html
OK thanks jlliagre, i will do so.

A +

red
 
Old 10-29-2006, 03:37 PM   #10
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
Well

I've formated the HDD2.

I created two partitions, one for Centos and another for Solaris.

Now, i can have centos and windows when i boot the box from the HDD1. Both Windows and Centos work fine.

However in orther to have solaris, i should change the bios setting to boot from HDD2.

In this last case it seems that i can boot to have either solaris or windows.

Launching solaris seems in good shape and health but i could not have the graphical mode.

When i boot the solaris; it goes to console mode, it asks for my password and then how to go to graphical mode?

The 'ifconfig -a) command give's only the loopback (i've got two NIC's).

The (who -r) command tels me that i am in runlevel 3.

On the other hands if i launch windows, well i'am in trouble.
It says:
" Booting 'windows'
rootverify (hd0,0)
chainloader +1
ERROR 13: "invalid or unsupported executable format"

It seem's that i missed something when i installed the solaris!!
It has something with grub!!

Thanks.

red
Last edited by hermouche; 10-30-2006 at 12:31 AM.
 
Old 11-03-2006, 12:26 PM   #11
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
installed solaris but "internet" ?
hy

I 've managed to install Solaris 10 6/06 but now i can not have the internet (can't go outside).

While i installed it, never it asked me for the NIC. I' ve got two NIC's in my box.

What's the problem?

thanks
red
 
Old 11-03-2006, 01:53 PM   #12
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.4, Oracle Linux, Mint, Debian/WSL
Posts: 9,789

Rep: Reputation: 492Reputation: 492Reputation: 492Reputation: 492Reputation: 492
This is a common issue that has already been discussed several times in this very forum.

What NICs are there ?

Post the output of /usr/X11/bin/scanpci and have a look at the system messages (dmesg) for network devices.
 
Old 11-04-2006, 12:05 AM   #13
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by jlliagre
This is a common issue that has already been discussed several times in this very forum.

What NICs are there ?

Post the output of /usr/X11/bin/scanpci and have a look at the system messages (dmesg) for network devices.
Thanks jlliagre, well i am sorry it was a mistake, i wanted to open a new thread.

However, these are my NIC's:
- Carte Fast Ethernet CNet PRO200 PCI
- VIA VT6105 Rhine III Fast Ethernet Adapter

I can't really see what's inside the output of
vi /usr/X11/bin/scanpci: <\4^A^B\350^F^L......and so on, it is unreadable.

For the dmesg, well i don't now how to deal with since it is in another computer. I opened the dmesg with vi within a terminal. It is to long to write it down. If there is something special that i have to look for well i will search for it and will responde.

As far as i now there is only the loopback lo0 127.0.0.1. No other device on it.

Thanks again jlliagre.

red
 
Old 11-04-2006, 12:37 AM   #14
jlliagre
Moderator
 
Registered: Feb 2004
Location: Outside Paris
Distribution: Solaris 11.4, Oracle Linux, Mint, Debian/WSL
Posts: 9,789

Rep: Reputation: 492Reputation: 492Reputation: 492Reputation: 492Reputation: 492
scanpci is a binary program.
The correct way to see a program output is by running it, not editing it !

Same comment for dmesg.
 
Old 11-04-2006, 10:52 AM   #15
hermouche
Member
 
Registered: Nov 2004
Location: Algeria
Posts: 111

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by jlliagre
scanpci is a binary program.
The correct way to see a program output is by running it, not editing it !

Same comment for dmesg.
ok. After running scanpci, this is the output:

- pci bus 0x0002 cardnum 0x0c function 0x00: vendor 0x1282 device 0x9102 Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet
- pci bus 0x0002 cardnum 0x0c function 0x00 0x1106 device 0x3106 VIA Technologies, Inc. VT6105 [Rhine-III]

After running dmesg, this is the output:

Sat Nov 4 17:48:45 CET 2006
Nov 4 07:38:58 red.solaris.internal genunix: [ID 672855 kern.notice] syncing file systems...
Nov 4 07:38:58 red.solaris.internal genunix: [ID 904073 kern.notice] done
Nov 4 17:19:44 red.solaris.internal genunix: [ID 540533 kern.notice] ^MSunOS Release 5.10 Version Generic_118855-14 32-bit
Nov 4 17:19:44 red.solaris.internal genunix: [ID 943906 kern.notice] Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Nov 4 17:19:44 red.solaris.internal Use is subject to license terms.
Nov 4 17:19:44 red.solaris.internal unix: [ID 126719 kern.info] features: 1007fdf<cpuid,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr,tsc,lgpg>
Nov 4 17:19:44 red.solaris.internal unix: [ID 168242 kern.info] mem = 392748K (0x17f8b000)
Nov 4 17:19:44 red.solaris.internal rootnex: [ID 466748 kern.info] root nexus = i86pc
Nov 4 17:19:44 red.solaris.internal rootnex: [ID 349649 kern.info] pseudo0 at root
Nov 4 17:19:44 red.solaris.internal genunix: [ID 936769 kern.info] pseudo0 is /pseudo
Nov 4 17:19:44 red.solaris.internal rootnex: [ID 349649 kern.info] scsi_vhci0 at root
Nov 4 17:19:44 red.solaris.internal genunix: [ID 936769 kern.info] scsi_vhci0 is /scsi_vhci
Nov 4 17:19:44 red.solaris.internal rootnex: [ID 349649 kern.info] isa0 at root
Nov 4 17:19:44 red.solaris.internal pcplusmp: [ID 658230 kern.info] NOTICE: apic: local nmi: 0 1 1 1
Nov 4 17:19:44 red.solaris.internal pcplusmp: [ID 736762 kern.info] pcplusmp: vector 0x9 ioapic 0x2 intin 0x9 is bound to cpu 0
Nov 4 17:19:44 red.solaris.internal rootnex: [ID 349649 kern.info] pci0 at root: space 0 offset 0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 936769 kern.info] pci0 is /pci@0,0
Nov 4 17:19:44 red.solaris.internal pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0
Nov 4 17:19:44 red.solaris.internal last message repeated 1 time
Nov 4 17:19:44 red.solaris.internal genunix: [ID 640982 kern.info] IDE device at targ 0, lun 0 lastlun 0x0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 846691 kern.info] model ST340016A
Nov 4 17:19:44 red.solaris.internal genunix: [ID 479077 kern.info] ATA/ATAPI-5 supported, majver 0x3e minver 0x0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 228648 kern.info] ata_set_feature: (0x66,0x0) failed
Nov 4 17:19:44 red.solaris.internal genunix: [ID 640982 kern.info] IDE device at targ 1, lun 0 lastlun 0x0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 846691 kern.info] model ST320410A
Nov 4 17:19:44 red.solaris.internal genunix: [ID 479077 kern.info] ATA/ATAPI-6 supported, majver 0x7e minver 0x0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 228648 kern.info] ata_set_feature: (0x66,0x0) failed
Nov 4 17:19:44 red.solaris.internal pci: [ID 370704 kern.info] PCI-device: ide@0, ata0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 936769 kern.info] ata0 is /pci@0,0/pci-ide@1f,1/ide@0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 773945 kern.info] UltraDMA mode 5 selected
Nov 4 17:19:44 red.solaris.internal last message repeated 1 time
Nov 4 17:19:44 red.solaris.internal gda: [ID 243001 kern.info] Disk1: <Vendor 'Gen-ATA ' Product 'ST320410A '>
Nov 4 17:19:44 red.solaris.internal ata: [ID 496167 kern.info] cmdk1 at ata0 target 1 lun 0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 936769 kern.info] cmdk1 is /pci@0,0/pci-ide@1f,1/ide@0/cmdk@1,0
Nov 4 17:19:44 red.solaris.internal unix: [ID 190185 kern.info] SMBIOS v2.3 loaded (1418 bytes)
Nov 4 17:19:44 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: dld0
Nov 4 17:19:44 red.solaris.internal genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Nov 4 17:19:45 red.solaris.internal pci: [ID 370704 kern.info] PCI-device: pci8086,1a31@1, pci_pci0
Nov 4 17:19:45 red.solaris.internal genunix: [ID 936769 kern.info] pci_pci0 is /pci@0,0/pci8086,1a31@1
Nov 4 17:19:45 red.solaris.internal pci: [ID 370704 kern.info] PCI-device: pci8086,244e@1e, pci_pci1
Nov 4 17:19:45 red.solaris.internal genunix: [ID 936769 kern.info] pci_pci1 is /pci@0,0/pci8086,244e@1e
Nov 4 17:19:45 red.solaris.internal pcplusmp: [ID 637496 kern.info] pcplusmp: pciclass,0c0320 (ehci) instance 0 vector 0x13 ioapic 0x2 intin 0x13 is bound to cpu 0
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Due to recently discovered incompatibilities
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): with this USB controller, USB2.x transfer
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): support has been disabled. This device will
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): continue to function as a USB1.x controller.
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): If you are interested in enabling USB2.x
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): support please, refer to the ehci(7D) man page.
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Please also refer to www.sun.com/io for
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Solaris Ready products and to
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): www.sun.com/bigadmin/hcl for additional
Nov 4 17:19:45 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): compatible USB products.
Nov 4 17:19:45 red.solaris.internal pcplusmp: [ID 637496 kern.info] pcplusmp: pciclass,0c0300 (uhci) instance 0 vector 0x13 ioapic 0x2 intin 0x13 is bound to cpu 0
Nov 4 17:19:46 red.solaris.internal pci: [ID 370704 kern.info] PCI-device: pci1043,8028@1f,2, uhci0
Nov 4 17:19:46 red.solaris.internal genunix: [ID 936769 kern.info] uhci0 is /pci@0,0/pci1043,8028@1f,2
Nov 4 17:19:46 red.solaris.internal pcplusmp: [ID 398438 kern.info] pcplusmp: pciclass,0c0300 (uhci) instance #1 vector 0x17 ioapic 0x2 intin 0x17 is bound to cpu 0
Nov 4 17:19:47 red.solaris.internal pci: [ID 370704 kern.info] PCI-device: pci1043,8028@1f,4, uhci1
Nov 4 17:19:47 red.solaris.internal genunix: [ID 936769 kern.info] uhci1 is /pci@0,0/pci1043,8028@1f,4
Nov 4 17:19:47 red.solaris.internal pcplusmp: [ID 398438 kern.info] pcplusmp: pciclass,0c0300 (uhci) instance #2 vector 0x11 ioapic 0x2 intin 0x11 is bound to cpu 0
Nov 4 17:19:48 red.solaris.internal usba: [ID 912658 kern.info] USB 2.0 device (usb45e,dd) operating at low speed (USB 1.x) on USB 1.10 root hub: device@1, usb_mid0 at bus address 2
Nov 4 17:19:48 red.solaris.internal usba: [ID 349649 kern.info] Microsoft Comfort Curve Keyboard 2000
Nov 4 17:19:48 red.solaris.internal genunix: [ID 936769 kern.info] usb_mid0 is /pci@0,0/pci1043,8028@1f,2/device@1
Nov 4 17:19:48 red.solaris.internal genunix: [ID 408114 kern.info] /pci@0,0/pci1043,8028@1f,2/device@1 (usb_mid0) online
Nov 4 17:19:48 red.solaris.internal usba: [ID 912658 kern.info] USB 1.0 device (usb461,4d01) operating at low speed (USB 1.x) on USB 1.10 root hub: mouse@2, hid0 at bus address 3
Nov 4 17:19:48 red.solaris.internal genunix: [ID 936769 kern.info] hid0 is /pci@0,0/pci1043,8028@1f,2/mouse@2
Nov 4 17:19:48 red.solaris.internal genunix: [ID 408114 kern.info] /pci@0,0/pci1043,8028@1f,2/mouse@2 (hid0) online
Nov 4 17:19:48 red.solaris.internal usba: [ID 912658 kern.info] USB 2.0 interface (usbif45e,dd.config1.0) operating at low speed (USB 1.x) on USB 1.10 root hub: keyboard@0, hid1 at bus address 2
Nov 4 17:19:48 red.solaris.internal usba: [ID 349649 kern.info] Microsoft Comfort Curve Keyboard 2000
Nov 4 17:19:48 red.solaris.internal genunix: [ID 936769 kern.info] hid1 is /pci@0,0/pci1043,8028@1f,2/device@1/keyboard@0
Nov 4 17:19:48 red.solaris.internal genunix: [ID 408114 kern.info] /pci@0,0/pci1043,8028@1f,2/device@1/keyboard@0 (hid1) online
Nov 4 17:19:48 red.solaris.internal usba: [ID 912658 kern.info] USB 2.0 interface (usbif45e,dd.config1.1) operating at low speed (USB 1.x) on USB 1.10 root hub: input@1, hid2 at bus address 2
Nov 4 17:19:48 red.solaris.internal usba: [ID 349649 kern.info] Microsoft Comfort Curve Keyboard 2000
Nov 4 17:19:48 red.solaris.internal genunix: [ID 936769 kern.info] hid2 is /pci@0,0/pci1043,8028@1f,2/device@1/input@1
Nov 4 17:19:48 red.solaris.internal genunix: [ID 408114 kern.info] /pci@0,0/pci1043,8028@1f,2/device@1/input@1 (hid2) online
Nov 4 17:19:48 red.solaris.internal pci_pci: [ID 370704 kern.info] PCI-device: pci1043,8080@5, uhci2
Nov 4 17:19:48 red.solaris.internal genunix: [ID 936769 kern.info] uhci2 is /pci@0,0/pci8086,244e@1e/pci1043,8080@5
Nov 4 17:19:48 red.solaris.internal pcplusmp: [ID 398438 kern.info] pcplusmp: pciclass,0c0300 (uhci) instance #3 vector 0x12 ioapic 0x2 intin 0x12 is bound to cpu 0
Nov 4 17:19:49 red.solaris.internal pci_pci: [ID 370704 kern.info] PCI-device: pci1043,8080@5,1, uhci3
Nov 4 17:19:49 red.solaris.internal genunix: [ID 936769 kern.info] uhci3 is /pci@0,0/pci8086,244e@1e/pci1043,8080@5,1
Nov 4 17:19:50 red.solaris.internal unix: [ID 950921 kern.info] cpu0: x86 (GenuineIntel family 15 model 1 step 3 clock 1717 MHz)
Nov 4 17:19:50 red.solaris.internal unix: [ID 950921 kern.info] cpu0: Intel(r) Celeron(r) CPU 1.70GHz
Nov 4 17:19:50 red.solaris.internal usba: [ID 912658 kern.info] USB 1.0 device (usb6bd,2095) operating at full speed (USB 1.x) on USB 1.10 root hub: device@1, usb_mid1 at bus address 2
Nov 4 17:19:50 red.solaris.internal usba: [ID 349649 kern.info] AGFA SNAPSCAN
Nov 4 17:19:50 red.solaris.internal genunix: [ID 936769 kern.info] usb_mid1 is /pci@0,0/pci8086,244e@1e/pci1043,8080@5/device@1
Nov 4 17:19:50 red.solaris.internal genunix: [ID 408114 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5/device@1 (usb_mid1) online
Nov 4 17:19:50 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5/device@1 (usb_mid1): no driver found for interface 0 (nodename: 'interface') of AGFA SNAPSCAN
Nov 4 17:19:50 red.solaris.internal rootnex: [ID 349649 kern.info] iscsi0 at root
Nov 4 17:19:50 red.solaris.internal genunix: [ID 936769 kern.info] iscsi0 is /iscsi
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Due to recently discovered incompatibilities
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): with this USB controller, USB2.x transfer
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): support has been disabled. This device will
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): continue to function as a USB1.x controller.
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): If you are interested in enabling USB2.x
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): support please, refer to the ehci(7D) man page.
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Please also refer to www.sun.com/io for
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Solaris Ready products and to
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): www.sun.com/bigadmin/hcl for additional
Nov 4 17:19:56 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): compatible USB products.
Nov 4 17:20:01 red.solaris.internal genunix: [ID 773945 kern.info] UltraDMA mode 5 selected
Nov 4 17:20:01 red.solaris.internal last message repeated 1 time
Nov 4 17:20:02 red.solaris.internal genunix: [ID 454863 kern.info] dump on /dev/dsk/c0d1s1 size 596 MB
Nov 4 17:20:04 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: dtrace0
Nov 4 17:20:04 red.solaris.internal genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace@0
Nov 4 17:20:05 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: zfs0
Nov 4 17:20:05 red.solaris.internal genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs@0
Nov 4 17:20:06 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: pm0
Nov 4 17:20:06 red.solaris.internal genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Nov 4 17:20:07 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: power0
Nov 4 17:20:07 red.solaris.internal genunix: [ID 936769 kern.info] power0 is /pseudo/power@0
Nov 4 17:20:08 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Nov 4 17:20:08 red.solaris.internal genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Nov 4 17:20:18 red.solaris.internal pcplusmp: [ID 637496 kern.info] pcplusmp: asy (asy) instance 0 vector 0x4 ioapic 0x2 intin 0x4 is bound to cpu 0
Nov 4 17:20:18 red.solaris.internal isa: [ID 202937 kern.info] ISA-device: asy0
Nov 4 17:20:18 red.solaris.internal genunix: [ID 936769 kern.info] asy0 is /isa/asy@1,3f8
Nov 4 17:20:18 red.solaris.internal rootnex: [ID 349649 kern.info] xsvc0 at root
Nov 4 17:20:18 red.solaris.internal genunix: [ID 936769 kern.info] xsvc0 is /xsvc
Nov 4 17:20:25 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: vol0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Nov 4 17:20:25 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: pseudo1
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] pseudo1 is /pseudo/zconsnex@1
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Due to recently discovered incompatibilities
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): with this USB controller, USB2.x transfer
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): support has been disabled. This device will
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): continue to function as a USB1.x controller.
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): If you are interested in enabling USB2.x
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): support please, refer to the ehci(7D) man page.
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Please also refer to www.sun.com/io for
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): Solaris Ready products and to
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): www.sun.com/bigadmin/hcl for additional
Nov 4 17:20:25 red.solaris.internal usba: [ID 723738 kern.info] /pci@0,0/pci8086,244e@1e/pci1043,8080@5,2 (ehci0): compatible USB products.
Nov 4 17:20:25 red.solaris.internal pcplusmp: [ID 398438 kern.info] pcplusmp: ide (ata) instance #1 vector 0xf ioapic 0x2 intin 0xf is bound to cpu 0
Nov 4 17:20:25 red.solaris.internal last message repeated 1 time
Nov 4 17:20:25 red.solaris.internal genunix: [ID 640982 kern.info] ATAPI device at targ 0, lun 0 lastlun 0x0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 846691 kern.info] model HL-DT-ST GCE-8480B
Nov 4 17:20:25 red.solaris.internal genunix: [ID 640982 kern.info] ATAPI device at targ 1, lun 0 lastlun 0x0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 846691 kern.info] model LITE-ON DVDRW LDW-451S
Nov 4 17:20:25 red.solaris.internal genunix: [ID 479077 kern.info] ATA/ATAPI-5 supported, majver 0x20 minver 0x0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 228648 kern.info] ata_set_feature: (0x66,0x0) failed
Nov 4 17:20:25 red.solaris.internal pci: [ID 370704 kern.info] PCI-device: ide@1, ata1
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] ata1 is /pci@0,0/pci-ide@1f,1/ide@1
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal genunix: [ID 935449 kern.info] ATA DMA off: disabled. Control with "atapi-cd-dma-enabled" property
Nov 4 17:20:25 red.solaris.internal genunix: [ID 882269 kern.info] PIO mode 4 selected
Nov 4 17:20:25 red.solaris.internal pcplusmp: [ID 637496 kern.info] pcplusmp: fdc (fdc) instance 0 vector 0x6 ioapic 0x2 intin 0x6 is bound to cpu 0
Nov 4 17:20:25 red.solaris.internal isa: [ID 202937 kern.info] ISA-device: fdc0
Nov 4 17:20:25 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] ramdisk1024 is /pseudo/ramdisk@1024
Nov 4 17:20:25 red.solaris.internal fdc: [ID 114370 kern.info] fd0 at fdc0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] fd0 is /isa/fdc@1,3f2/fd@0,0
Nov 4 17:20:25 red.solaris.internal scsi: [ID 193665 kern.info] sd0 at ata1: target 0 lun 0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] sd0 is /pci@0,0/pci-ide@1f,1/ide@1/sd@0,0
Nov 4 17:20:25 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] lockstat0 is /pseudo/lockstat@0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 314293 kern.info] device pciclass,030000@0(display#0) keeps up device sd@0,0(sd#0), but the latter is not power managed
Nov 4 17:20:25 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: llc10
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
Nov 4 17:20:25 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
Nov 4 17:20:25 red.solaris.internal genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: profile0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: systrace0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: fbt0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: sdt0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] fasttrap0 is /pseudo/fasttrap@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap@0
Nov 4 17:20:26 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Nov 4 17:20:26 red.solaris.internal genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
Nov 4 17:20:27 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Nov 4 17:20:27 red.solaris.internal genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm@0
Nov 4 17:20:27 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: pool0
Nov 4 17:20:27 red.solaris.internal genunix: [ID 936769 kern.info] pool0 is /pseudo/pool@0
Nov 4 17:20:27 red.solaris.internal ipf: [ID 774698 kern.info] IP Filter: v4.0.3, running.
Nov 4 17:20:29 red.solaris.internal gda: [ID 243001 kern.info] Disk0: <Vendor 'Gen-ATA ' Product 'ST340016A '>
Nov 4 17:20:29 red.solaris.internal ata: [ID 496167 kern.info] cmdk0 at ata0 target 0 lun 0
Nov 4 17:20:29 red.solaris.internal genunix: [ID 936769 kern.info] cmdk0 is /pci@0,0/pci-ide@1f,1/ide@0/cmdk@0,0
Nov 4 17:20:30 red.solaris.internal scsi: [ID 193665 kern.info] sd1 at ata1: target 1 lun 0
Nov 4 17:20:30 red.solaris.internal genunix: [ID 936769 kern.info] sd1 is /pci@0,0/pci-ide@1f,1/ide@1/sd@1,0
Nov 4 17:20:30 red.solaris.internal genunix: [ID 314293 kern.info] device pciclass,030000@0(display#0) keeps up device sd@1,0(sd#1), but the latter is not power managed
Nov 4 17:25:09 red.solaris.internal pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Nov 4 17:25:09 red.solaris.internal genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0

Well i am sorry it is to long.

i hope it will help.

thanks again.

red
 
  


Reply
Page 1 of 2 1 2



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
CentOS 4.0 + Windows XP Dual Boot laserlight Linux - Enterprise 9 02-01-2010 12:51 PM
Solaris 10 can't mount a CentOS share ALUOp Linux - Networking 2 11-08-2008 06:32 AM
installing Centos on a Windows Laptop as the secondary OS NateCC Linux - Newbie 4 10-03-2006 08:23 AM
Windows and FC3 and Solaris---and only Solaris boot error message zillah Linux - Laptop and Netbook 1 07-07-2005 10:17 PM
update centos 4 rc1 to centos 4 trou yum? maxut cAos 2 03-04-2005 02:36 AM

LinuxQuestions.org > Forums > Other *NIX Forums > Solaris / OpenSolaris

All times are GMT -5. The time now is 01:17 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration