LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware - Installation (https://www.linuxquestions.org/questions/slackware-installation-40/)
-   -   [USB Whoes]US robotics faxmodem? (https://www.linuxquestions.org/questions/slackware-installation-40/%5Busb-whoes%5Dus-robotics-faxmodem-143355/)

pickledbeans 02-07-2004 12:08 PM

[USB Whoes]US robotics faxmodem?
 
Howdy --
<System>
Slackware 9.0
Toshiba 335CDS laptop
</System>

I'm having a probem getting a US Robotics USB modem to work (56K USB Faxmodem: USR5633A)?

It's listed as being on com 2 with a IRQ of 3 under windows.
The USB hub recognized and the device is located but it doesn't see it a modem?

What's more insteresting is that the modem is listed in /proc/bus/usb/devices
correctly, but no driver is listed as being loaded?


What the work around for this?


TIA,
David

--------------------- DETAILS -------

-------- demsg ----------------------------------------

usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc711e000, IRQ 11
usb-ohci.c: usb-00:0b.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:0b.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xbaf/0xec) is not claimed by any active driver.
usb-uhci.c: $Revision: 1.275 $ time 15:38:38 Mar 11 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1

------------- cat /proc/bus/usb/devices -------

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=c711e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0baf ProdID=00ec Rev= 0.01
S: Manufacturer=U.S. Robotics
S: Product=U.S. Robotics 56K Faxmodem USB
S: SerialNumber=USBHCF00000006
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=150mA
I: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms



All times are GMT -5. The time now is 02:10 PM.