LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware - ARM (http://www.linuxquestions.org/questions/slackware-arm-108/)
-   -   Raspberry Pi - IDE to USB interface (http://www.linuxquestions.org/questions/slackware-arm-108/raspberry-pi-ide-to-usb-interface-4175503222/)

frushiyama 04-28-2014 07:36 AM

Raspberry Pi - IDE to USB interface
 
I will use old IDE HDD on raspberry, anyone has similar setup and hints on which interface USB / IDE to use?
I have 03 HDD with IDE only, my goal is to use only one USB port to acess those three drivers.

schneidz 04-28-2014 07:58 AM

i used something like this in the past which lasted me abut 5 years:
http://www.microbarn.com/details.aspx?rid=101560

louigi600 04-28-2014 09:51 AM

If you want to use all 3 drives at the same time you will either need to have a powered usb hub or one of those rather expensive usb storage devices that support raid/stripe on 2 or more disks (like the Lacie 2big Thunderbolt http://www.lacie.com/products/range.htm?id=10061 ).

If on the other hand you want to plug in one at a time it's just a matter of choosing a convenient way of flipping them around that suits your budget.
Schneidz's solution id pretty good, I've a similar adapter that I find very handy, it came with tan external power supply supplement for driving full power 3.5" drives.

frushiyama 05-03-2014 03:46 PM

Well due to the old age of those disks i will not spend resources on an adapter that will be used until those disk fail, which could be soon.


All times are GMT -5. The time now is 12:46 PM.