LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (http://www.linuxquestions.org/questions/slackware-14/)
-   -   USB errors durring boot. have to unplug keyboard, plug back in to use it to sign on (http://www.linuxquestions.org/questions/slackware-14/usb-errors-durring-boot-have-to-unplug-keyboard-plug-back-in-to-use-it-to-sign-on-628477/)

agentc0re 03-16-2008 02:33 PM

USB errors durring boot. have to unplug keyboard, plug back in to use it to sign on
 
Errors from boot.

Code:

usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: device descriptor read/64, error -62
usb 2-2: device descriptor read/64, error -62
usb 2-2: new full speed USB device using ohci_hcd and address 4
usb 2-2: device descriptor read/64, error -62
usb 2-2: device descriptor read/64, error -62
usb 2-2: new full speed USB device using ohci_hcd and address 5
usb 2-2: device not accepting address 5, error -62
usb 2-2: new full speed USB device using ohci_hcd and address 6
usb 2-2: device not accepting address 6, error -62
usb 2-6: new low speed USB device using ohci_hcd and address 7
usb 2-6: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-1
input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input2
input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0b.0-6
input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input3
input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:0b.0-6
usbcore: registered new interface driver usbhid

As you can see, it does detect my mouse and keyboard.
getting my keyboard to work is as simple as unplugging it and plugging it back in.

One thing that was weird when i was trying to get my initrd to startup my raid1, i first tried putting mdadm -As in it(which didn't work and i did find the solution to it) and when i booted up after writing it my keyboard worked off the bat. I still got those errors though. might have just been a coincidence. removed that line, wrote the changes, rebooted and i had to unplug/plugin to get it to work.

anyone have any idea's?

pjbgravely 03-16-2008 05:16 PM

Make sure that USB keyboard support is enabled in the BIOS. If that doesn't help then your change may have added a delay that allowed the keyboard to register after the errors settled down.

Also try plugging the keyboard directly into a port on the computer. If the hub listed is in your motherboard then that could be the cause of the errors.

Paul

agentc0re 03-16-2008 07:15 PM

Quote:

Originally Posted by pjbgravely (Post 3090651)
Make sure that USB keyboard support is enabled in the BIOS. If that doesn't help then your change may have added a delay that allowed the keyboard to register after the errors settled down.

USB keyboard support is enabled in the bios.

Quote:

Originally Posted by pjbgravely (Post 3090651)
Also try plugging the keyboard directly into a port on the computer. If the hub listed is in your motherboard then that could be the cause of the errors.

Paul

Keyboard is connected directly into a usb port from the motherboard. I don't have a usb hub plugged in at all.

agentc0re 03-17-2008 12:56 AM

Okay I figured out how to get it fixed. What I find weird about this, is I didn't have to change these settings before i reinstalled and did my LVM setup.
Anyways, in bios i turned APIC off. That fixed it, but made it so linux only saw one of my dual cores. Went back and noticed that when i disabled APIC that MPS version disapears as an option. It was set to 1.4, so I changed it to 1.1.
Rebooted, shows both cores and keyboard works without having to unplug/plug it back in. I still am getting those USB errors, which i also didn't receive before i reinstalled.

Anyone might have any more insight on this?

tiersen 03-17-2008 06:10 AM

try to change your boot order

internetSurfer 03-17-2008 08:02 PM

Have you looked @:

fstab pmount
Hal
usbutils


All times are GMT -5. The time now is 05:39 PM.