LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (http://www.linuxquestions.org/questions/slackware-14/)
-   -   upgrade to slack 13 broke samba (http://www.linuxquestions.org/questions/slackware-14/upgrade-to-slack-13-broke-samba-770107/)

unclejed613 11-18-2009 11:21 PM

upgrade to slack 13 broke samba
 
months after upgrading to slack 13, i find that samba is broken.... SWAT no longer works, and i have to make changes to smb.conf by hand. any attempt to edit smb.conf using the KDE Sys Settings tool hoses samba to the point both nmbd and smbd do core dumps and die. i finally got it working well enough that my children can watch movies i have available, but SWAT still doesn't work. here's my current smb.conf:

Code:

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

workgroup = STBM


# server string is the equivalent of the NT Description field


# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 192.168.0. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes

# you may wish to override the location of the printcap file
;  printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;  printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
;  printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba.%m

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Use password server option only with security = server
# The argument list may include:
#  password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#  password server = *
;  password server = <NT-Server-Name>

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
;  realm = MY_REALM

# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
#      this line.  The included file is read at that point.
;  include = /usr/local/samba/lib/smb.conf.%m

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
bind interfaces only = no
;  interfaces = 192.168.0.29 127.0.0.1

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;  domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
;  domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;  logon script = %m.bat
# run a specific logon batch file per username
;  logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;  logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;  wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#        Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;  wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one        WINS Server on the network. The default is NO.
;  wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no

# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
add user script = /usr/sbin/useradd %u
add group script = /usr/sbin/groupadd %g
add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
delete user script = /usr/sbin/userdel %u
delete user from group script = /usr/sbin/deluser %u %g
delete group script = /usr/sbin/groupdel %g
map to guest = Bad User
guest account = jed
restrict anonymous = no
guest ok = yes
domain master = no
set primary group script = /usr/sbin/groupadd %g
max protocol = NT1
acl compatibility = auto
ldap ssl = No
server signing = Auto
lm announce = Yes

#============================ Share Definitions ==============================
[homes]
comment = Home Directories
public = no
read only = no

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;  comment = Network Logon Service
;  path = /usr/local/samba/lib/netlogon
;  guest ok = yes
;  writable = no
;  share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
printable = yes

[jed]
hide files = bin/lib/
read only = no
public = yes
path = /media/Easy Drive


[MOVIES]
path = /slack120/jed-docs/downloads/movies/
public = yes
read only = no

i refuse to use any of the KDE tools that edit smb.conf. both the sys settings tool, and now i find out the file sharing tool in the KDE file permissions tool, makes fatal changes to smb.conf (i haven't dug into it enough to find out just what those changes are yet, maybe if i get the time to look at it again later this week). what's missing or broken here that SWAT doesn't work?

allend 11-19-2009 01:38 AM

Quote:

what's missing or broken here that SWAT doesn't work?
Have you uncommented the 'swat' line in /etc/inetd.conf? (Note the comments at the top of the file on what to do after an edit.)
http://samba.xsec.it/samba/docs/man/...tion/SWAT.html

PS: I hate swat! It wipes out comment lines in smb.conf.

unclejed613 11-19-2009 07:43 AM

i had SWAT working before i upgraded to slack 13, and i had samba working the way i wanted it before i upgraded. one thing i found out last night was that after the upgrade to 13, my whole system was visible on the [homes] share. kinda scary... before the upgrade, [homes] was just the non-root user home directories. i think KDE's system settings tool might have had something to do with that as well, but i'm not sure. i do have a copy of the pre-13 smb.conf(which is partially how i got samba working again) that i can compare against. tnx for the info about the inetd setting. i'll look at it

unclejed613 11-19-2009 07:59 AM

tnx, that worked. i wish there was a list of things in the KDE sys settings tool that are broken. i know that it breaks rc.inet1 and now i know it breaks samba....


All times are GMT -5. The time now is 01:09 AM.