LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (https://www.linuxquestions.org/questions/slackware-14/)
-   -   Trying to install latest open source ATI drivers. Failing (specifically dri) (https://www.linuxquestions.org/questions/slackware-14/trying-to-install-latest-open-source-ati-drivers-failing-specifically-dri-652441/)

GushpinBob 06-29-2008 03:04 PM
Trying to install latest open source ATI drivers. Failing (specifically dri)
 
I'm trying to install the latest open source ATI drivers on my laptop running Slackware 12.0 using an ATI Mobility Radeon X1400 (R500 based). The reason is that I had enough of the shenanigans fglrx was pulling on me (major display corruption in XFCE, slow scrolling in Firefox, won't even build on kernels 2.6.24.4 and higher even with the latest release) and ever since May this year I have heard that R500 based cards gained 3D (and maybe XV) support via the latest open source ati driver package (not radeonhd). Unfortunately I have had nothing but problems trying to get the driver to work, despite that everthing compiles successfully.

What I've done so far was compile and install the latest git versions of mesa (even the dri drivers), libdrm, and xf86-video-ati. Like I stated in the last paragraph, everything compiles with success and installation is not a problem. I can start x successfully with the ati driver and even execute some simple tricks like rotating the screen with xrandr. What I cannot do is get DRI enabled, therefore 2D rendering is slow, 3D software is very slow (glxgears runs at a pathetic ~250-300fps), and software that depends on AIGLX cannot run at all. For reference, here are the outputs from glxinfo

glxinfo
Code:
name of display: :0.0
display: :0  screen: 0
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
    GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,
    GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.2)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
    GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
    GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
    GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
    GL_ARB_texture_compression, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
    GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_program,
    GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
    GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
    GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
    GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
    GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
    GL_ATI_draw_buffers, GL_ATI_texture_env_combine3,
    GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3,
    GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square,
    GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite,
    GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
    GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
    GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays

17 GLX Visuals
  visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 N
Segmentation Fault
glxinfo with LIBGL_DEBUG=verbose output
Code:
libGL: XF86DRIGetClientDriverName: 6.9.0 r300 (screen 0)
libGL: OpenDriver: trying /usr/lib/dri/r300_dri.so
libGL error: dlopen /usr/lib/dri/r300_dri.so failed (/usr/lib/dri/r300_dri.so: undefined symbol: _glapi_Dispatch)
libGL error: unable to load driver: r300_dri.so

GushpinBob 06-29-2008 03:08 PM
More:


Xorg.0.log
Code:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/tabletpc:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux tabletpc 2.6.24.4 #3 SMP Sun Apr 20 18:15:23 CDT 2008 i686
Build Date: 14 December 2007  12:30:03PM
 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 29 14:46:26 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) |  |-->Monitor "aticonfig-Monitor[0]"
(**) |  |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "TouchPad"
(**) |-->Input Device "Keyboard1"
(**) Option "SuspendTime" "2"
(**) Option "AIGLX" "on"
(**) Option "IgnoreABI" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
        /usr/share/fonts/TTF,
        /usr/share/fonts/OTF,
        /usr/share/fonts/Type1,
        /usr/share/fonts/misc,
        /usr/share/fonts/75dpi/:unscaled,
        /usr/lib/X11/fonts/misc/,
        /usr/lib/X11/fonts/75dpi/:unscaled,
        /usr/lib/X11/fonts/100dpi/:unscaled,
        /usr/lib/X11/fonts/Speedo/,
        /usr/lib/X11/fonts/Type1/,
        /usr/lib/X11/fonts/TTF/,
        /usr/lib/X11/fonts/OTF/,
        /usr/lib/X11/fonts/cyrillic/,
        /usr/lib/X11/fonts/75dpi/,
        /usr/lib/X11/fonts/100dpi/,
        /usr/share/fonts/TTF,
        /usr/share/fonts/OTF,
        /usr/share/fonts/Type1,
        /usr/share/fonts/misc,
        /usr/share/fonts/75dpi/:unscaled
(==) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules,/usr/lib/xorg/modules/input"
(**) Extension "RENDER" is enabled
(**) Extension "DAMAGE" is enabled
(**) Extension "Composite" is enabled
(**) Extension "XVideo" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d2940
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 2.0
        X.Org XInput driver : 2.0
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 107b,0281 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 107b,0281 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 107b,0281 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 107b,0281 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 107b,0281 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 107b,0281 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 107b,0281 rev 02 class 0c,03,20 hdr 00



(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 107b,0281 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,27df card 107b,0281 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,27c5 card 107b,0281 rev 02 class 01,06,01 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 107b,0281 rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1002,7145 card 107b,0281 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 8086,109a card 107b,0281 rev 00 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 8086,4229 card 8086,1100 rev 61 class 02,80,00 hdr 00
(II) PCI: 04:09:0: chip 104c,8039 card 1400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 04:09:1: chip 104c,803a card 107b,0281 rev 00 class 0c,00,10 hdr 80
(II) PCI: 04:09:2: chip 104c,803b card 107b,0281 rev 00 class 01,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1        0        0x00002000 - 0x000020ff (0x100) IX[B]
        [1] -1        0        0x00002400 - 0x000024ff (0x100) IX[B]
        [2] -1        0        0x00002800 - 0x000028ff (0x100) IX[B]
        [3] -1        0        0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
        [0] -1        0        0xd8000000 - 0xd80fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
        [0] -1        0        0x00003000 - 0x000030ff (0x100) IX[B]
        [1] -1        0        0x00003400 - 0x000034ff (0x100) IX[B]
        [2] -1        0        0x00003800 - 0x000038ff (0x100) IX[B]
        [3] -1        0        0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
        [0] -1        0        0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
        [0] -1        0        0xd0000000 - 0xd1ffffff (0x2000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
        [0] -1        0        0x00004000 - 0x000040ff (0x100) IX[B]
        [1] -1        0        0x00004400 - 0x000044ff (0x100) IX[B]
        [2] -1        0        0x00004800 - 0x000048ff (0x100) IX[B]
        [3] -1        0        0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 3 non-prefetchable memory range:
        [0] -1        0        0xd6000000 - 0xd7ffffff (0x2000000) MX[B]
(II) Bus 3 prefetchable memory range:
        [0] -1        0        0xd2000000 - 0xd3ffffff (0x2000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:30:0), (0,4,5), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 4 non-prefetchable memory range:
        [0] -1        0        0xd8100000 - 0xd81fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (4:9:0), (4,5,8), BCTRL: 0x0340 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xc8000000/27, 0xd8000000/16, I/O @ 0x2000/8
(II) Addressable bus resource ranges are
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
        [0] -1        0        0xd8104000 - 0xd8104fff (0x1000) MX[B]
        [1] -1        0        0xd8100000 - 0xd8103fff (0x4000) MX[B]
        [2] -1        0        0xd8105000 - 0xd81057ff (0x800) MX[B]
        [3] -1        0        0xd6000000 - 0xd6001fff (0x2000) MX[B]
        [4] -1        0        0xd4000000 - 0xd401ffff (0x20000) MX[B]
        [5] -1        0        0xd8404400 - 0xd84047ff (0x400) MX[B]
        [6] -1        0        0xd8404000 - 0xd84043ff (0x400) MX[B]
        [7] -1        0        0xd8400000 - 0xd8403fff (0x4000) MX[B]
        [8] -1        0        0xd8000000 - 0xd800ffff (0x10000) MX[B](B)
        [9] -1        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [10] -1        0        0x00003000 - 0x0000301f (0x20) IX[B]
        [11] -1        0        0x000018e0 - 0x000018ff (0x20) IX[B]
        [12] -1        0        0x000018b0 - 0x000018bf (0x10) IX[B]
        [13] -1        0        0x000018a8 - 0x000018ab (0x4) IX[B]
        [14] -1        0        0x000018c0 - 0x000018c7 (0x8) IX[B]
        [15] -1        0        0x000018ac - 0x000018af (0x4) IX[B]
        [16] -1        0        0x000018c8 - 0x000018cf (0x8) IX[B]
        [17] -1        0        0x00001880 - 0x0000188f (0x10) IX[B]
        [18] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [19] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [20] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [21] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [22] -1        0        0x00001860 - 0x0000187f (0x20) IX[B]
        [23] -1        0        0x00001840 - 0x0000185f (0x20) IX[B]
        [24] -1        0        0x00001820 - 0x0000183f (0x20) IX[B]
        [25] -1        0        0x00001800 - 0x0000181f (0x20) IX[B]
        [26] -1        0        0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1        0        0xd8104000 - 0xd8104fff (0x1000) MX[B]
        [1] -1        0        0xd8100000 - 0xd8103fff (0x4000) MX[B]
        [2] -1        0        0xd8105000 - 0xd81057ff (0x800) MX[B]
        [3] -1        0        0xd6000000 - 0xd6001fff (0x2000) MX[B]
        [4] -1        0        0xd4000000 - 0xd401ffff (0x20000) MX[B]
        [5] -1        0        0xd8404400 - 0xd84047ff (0x400) MX[B]
        [6] -1        0        0xd8404000 - 0xd84043ff (0x400) MX[B]
        [7] -1        0        0xd8400000 - 0xd8403fff (0x4000) MX[B]
        [8] -1        0        0xd8000000 - 0xd800ffff (0x10000) MX[B](B)
        [9] -1        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [10] -1        0        0x00003000 - 0x0000301f (0x20) IX[B]
        [11] -1        0        0x000018e0 - 0x000018ff (0x20) IX[B]
        [12] -1        0        0x000018b0 - 0x000018bf (0x10) IX[B]
        [13] -1        0        0x000018a8 - 0x000018ab (0x4) IX[B]
        [14] -1        0        0x000018c0 - 0x000018c7 (0x8) IX[B]
        [15] -1        0        0x000018ac - 0x000018af (0x4) IX[B]
        [16] -1        0        0x000018c8 - 0x000018cf (0x8) IX[B]
        [17] -1        0        0x00001880 - 0x0000188f (0x10) IX[B]
        [18] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [19] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [20] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [21] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [22] -1        0        0x00001860 - 0x0000187f (0x20) IX[B]
        [23] -1        0        0x00001840 - 0x0000185f (0x20) IX[B]
        [24] -1        0        0x00001820 - 0x0000183f (0x20) IX[B]
        [25] -1        0        0x00001800 - 0x0000181f (0x20) IX[B]
        [26] -1        0        0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0xd8104000 - 0xd8104fff (0x1000) MX[B]
        [5] -1        0        0xd8100000 - 0xd8103fff (0x4000) MX[B]
        [6] -1        0        0xd8105000 - 0xd81057ff (0x800) MX[B]
        [7] -1        0        0xd6000000 - 0xd6001fff (0x2000) MX[B]
        [8] -1        0        0xd4000000 - 0xd401ffff (0x20000) MX[B]
        [9] -1        0        0xd8404400 - 0xd84047ff (0x400) MX[B]
        [10] -1        0        0xd8404000 - 0xd84043ff (0x400) MX[B]
        [11] -1        0        0xd8400000 - 0xd8403fff (0x4000) MX[B]
        [12] -1        0        0xd8000000 - 0xd800ffff (0x10000) MX[B](B)
        [13] -1        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [14] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [15] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [16] -1        0        0x00003000 - 0x0000301f (0x20) IX[B]
        [17] -1        0        0x000018e0 - 0x000018ff (0x20) IX[B]
        [18] -1        0        0x000018b0 - 0x000018bf (0x10) IX[B]
        [19] -1        0        0x000018a8 - 0x000018ab (0x4) IX[B]
        [20] -1        0        0x000018c0 - 0x000018c7 (0x8) IX[B]
        [21] -1        0        0x000018ac - 0x000018af (0x4) IX[B]
        [22] -1        0        0x000018c8 - 0x000018cf (0x8) IX[B]
        [23] -1        0        0x00001880 - 0x0000188f (0x10) IX[B]
        [24] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [25] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [26] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [27] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [28] -1        0        0x00001860 - 0x0000187f (0x20) IX[B]
        [29] -1        0        0x00001840 - 0x0000185f (0x20) IX[B]
        [30] -1        0        0x00001820 - 0x0000183f (0x20) IX[B]
        [31] -1        0        0x00001800 - 0x0000181f (0x20) IX[B]
        [32] -1        0        0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.4.0.90, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.2
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "ati"

GushpinBob 06-29-2008 03:11 PM
Even More Xorg.log
Code:
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 6.9.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 6.9.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.4.0, module version = 1.2.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
        compiled for 4.3.99.902, module version = 1.0.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.4.0, module version = 1.2.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.0
(II) RADEON: Driver for ATI Radeon chipsets:
        ATI Radeon Mobility X600 (M24) 3150 (PCIE),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
        ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
        ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
        ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
        ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
        ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
        ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
        ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
        ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
        ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
        ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
        ATI Radeon 9800XT NJ (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),

        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
        ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
        ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835,
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE),
        ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE),
        ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
        ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
        ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
        ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
        ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
        ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
        ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
        ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
        ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
        ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
        ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
        ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
        ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
        ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
        ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
        ATI Mobility Radeon X1700, ATI Radeon X2300HD,
        ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
        ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
        ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
        ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
        ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
        ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
        ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
        ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
        ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
        ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
        ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
        ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
        ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
        ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
        ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
        ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
        ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
        ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
        ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
        ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Mobility Radeon X1400 found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0xd8104000 - 0xd8104fff (0x1000) MX[B]
        [5] -1        0        0xd8100000 - 0xd8103fff (0x4000) MX[B]
        [6] -1        0        0xd8105000 - 0xd81057ff (0x800) MX[B]
        [7] -1        0        0xd6000000 - 0xd6001fff (0x2000) MX[B]
        [8] -1        0        0xd4000000 - 0xd401ffff (0x20000) MX[B]
        [9] -1        0        0xd8404400 - 0xd84047ff (0x400) MX[B]
        [10] -1        0        0xd8404000 - 0xd84043ff (0x400) MX[B]
        [11] -1        0        0xd8400000 - 0xd8403fff (0x4000) MX[B]
        [12] -1        0        0xd8000000 - 0xd800ffff (0x10000) MX[B](B)
        [13] -1        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [14] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [15] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [16] -1        0        0x00003000 - 0x0000301f (0x20) IX[B]
        [17] -1        0        0x000018e0 - 0x000018ff (0x20) IX[B]
        [18] -1        0        0x000018b0 - 0x000018bf (0x10) IX[B]
        [19] -1        0        0x000018a8 - 0x000018ab (0x4) IX[B]
        [20] -1        0        0x000018c0 - 0x000018c7 (0x8) IX[B]
        [21] -1        0        0x000018ac - 0x000018af (0x4) IX[B]
        [22] -1        0        0x000018c8 - 0x000018cf (0x8) IX[B]
        [23] -1        0        0x00001880 - 0x0000188f (0x10) IX[B]
        [24] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [25] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [26] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [27] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [28] -1        0        0x00001860 - 0x0000187f (0x20) IX[B]
        [29] -1        0        0x00001840 - 0x0000185f (0x20) IX[B]
        [30] -1        0        0x00001820 - 0x0000183f (0x20) IX[B]
        [31] -1        0        0x00001800 - 0x0000181f (0x20) IX[B]
        [32] -1        0        0x00002000 - 0x000020ff (0x100) IX[B](B)
(II) resource ranges after probing:
        [0] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1        0        0xd8104000 - 0xd8104fff (0x1000) MX[B]
        [5] -1        0        0xd8100000 - 0xd8103fff (0x4000) MX[B]
        [6] -1        0        0xd8105000 - 0xd81057ff (0x800) MX[B]
        [7] -1        0        0xd6000000 - 0xd6001fff (0x2000) MX[B]
        [8] -1        0        0xd4000000 - 0xd401ffff (0x20000) MX[B]
        [9] -1        0        0xd8404400 - 0xd84047ff (0x400) MX[B]
        [10] -1        0        0xd8404000 - 0xd84043ff (0x400) MX[B]
        [11] -1        0        0xd8400000 - 0xd8403fff (0x4000) MX[B]
        [12] -1        0        0xd8000000 - 0xd800ffff (0x10000) MX[B](B)
        [13] -1        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [14] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B]
        [15] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [16] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B]
        [17] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [18] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [19] -1        0        0x00003000 - 0x0000301f (0x20) IX[B]
        [20] -1        0        0x000018e0 - 0x000018ff (0x20) IX[B]
        [21] -1        0        0x000018b0 - 0x000018bf (0x10) IX[B]
        [22] -1        0        0x000018a8 - 0x000018ab (0x4) IX[B]
        [23] -1        0        0x000018c0 - 0x000018c7 (0x8) IX[B]
        [24] -1        0        0x000018ac - 0x000018af (0x4) IX[B]
        [25] -1        0        0x000018c8 - 0x000018cf (0x8) IX[B]
        [26] -1        0        0x00001880 - 0x0000188f (0x10) IX[B]
        [27] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [28] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [29] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [30] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [31] -1        0        0x00001860 - 0x0000187f (0x20) IX[B]
        [32] -1        0        0x00001840 - 0x0000185f (0x20) IX[B]
        [33] -1        0        0x00001820 - 0x0000183f (0x20) IX[B]
        [34] -1        0        0x00001800 - 0x0000181f (0x20) IX[B]
        [35] -1        0        0x00002000 - 0x000020ff (0x100) IX[B](B)
        [36] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B]
        [37] 0        0        0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000d8000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "accel" "Yes"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 0.1.0
        ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(WW) RADEON(0): R500 support is under development. Please report any issues to xorg-driver-ati@lists.x.org
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Video Driver, version 2.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
        SubsystemVendorID: 0x107b SubsystemID: 0x0281
        IOBaseAddress: 0x2000
        Filename: BR25321.BIN
        BIOS Bootup Message:
Gateway TA6_M54 445e/450m                                                 

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x3ffb000
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x3ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x3ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 445000
(II) RADEON(0): Default Memory Clock: 450000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.

(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 445.000000, mclk: 450.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=110000; xclk=40000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x7e40, DACType-1, TMDSType-0, ConnectorType-1, hpd_mask-0x0
(II) RADEON(0): Port1: DDCType-0x198, DACType-0, TMDSType-0, ConnectorType-7, hpd_mask-0x0
(II) RADEON(0): Output VGA-0 using monitor section aticonfig-Monitor[0]
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 768, DotClock: 68930
HBlank: 128, HOverPlus: 16, HSyncWidth: 48
VBlank: 48, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
 Monitor  -- AUTO
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- None
 DDC Type  -- 0x7e40
(II) RADEON(0): Port1:
 Monitor  -- AUTO
 Connector -- LVDS
 DAC Type  -- None
 TMDS Type -- None
 DDC Type  -- 0x198
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "LVDS:ddc2" removed.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "LVDS:ddc2" removed.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x768
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 3
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output LVDS using initial mode 1280x768
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (338, 203) mm
(**) RADEON(0): DPI set to (96, 160)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.2.0
        ABI class: X.Org Video Driver, version 2.0
(!!) RADEON(0): For information on using the multimedia capabilities
        of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0        0        0xd8000000 - 0xd800ffff (0x10000) MX[B]
        [1] 0        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B]
        [2] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [3] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [4] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [5] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [6] -1        0        0xd8104000 - 0xd8104fff (0x1000) MX[B]
        [7] -1        0        0xd8100000 - 0xd8103fff (0x4000) MX[B]
        [8] -1        0        0xd8105000 - 0xd81057ff (0x800) MX[B]
        [9] -1        0        0xd6000000 - 0xd6001fff (0x2000) MX[B]
        [10] -1        0        0xd4000000 - 0xd401ffff (0x20000) MX[B]
        [11] -1        0        0xd8404400 - 0xd84047ff (0x400) MX[B]
        [12] -1        0        0xd8404000 - 0xd84043ff (0x400) MX[B]
        [13] -1        0        0xd8400000 - 0xd8403fff (0x4000) MX[B]
        [14] -1        0        0xd8000000 - 0xd800ffff (0x10000) MX[B](B)
        [15] -1        0        0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
        [16] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
        [17] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
        [18] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
        [19] 0        0        0x00002000 - 0x000020ff (0x100) IX[B]
        [20] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [21] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [22] -1        0        0x00003000 - 0x0000301f (0x20) IX[B]
        [23] -1        0        0x000018e0 - 0x000018ff (0x20) IX[B]
        [24] -1        0        0x000018b0 - 0x000018bf (0x10) IX[B]
        [25] -1        0        0x000018a8 - 0x000018ab (0x4) IX[B]
        [26] -1        0        0x000018c0 - 0x000018c7 (0x8) IX[B]
        [27] -1        0        0x000018ac - 0x000018af (0x4) IX[B]
        [28] -1        0        0x000018c8 - 0x000018cf (0x8) IX[B]
        [29] -1        0        0x00001880 - 0x0000188f (0x10) IX[B]
        [30] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [31] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [32] -1        0        0x000001f0 - 0x000001f0 (0x1) IX[B]
        [33] -1        0        0x000001f0 - 0x000001f7 (0x8) IX[B]
        [34] -1        0        0x00001860 - 0x0000187f (0x20) IX[B]
        [35] -1        0        0x00001840 - 0x0000185f (0x20) IX[B]
        [36] -1        0        0x00001820 - 0x0000183f (0x20) IX[B]
        [37] -1        0        0x00001800 - 0x0000181f (0x20) IX[B]
        [38] -1        0        0x00002000 - 0x000020ff (0x100) IX[B](B)
        [39] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [40] 0        0        0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit c8000000 0 0
(==) RADEON(0): Write-combining range (0xc8000000,0x4000000)
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0):  mem_size        : 0x04000000
(II) RADEON(0):  MC_FB_LOCATION  : 0xcbffc800
(II) RADEON(0):  MC_AGP_LOCATION  : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1374000
(II) RADEON(0): Will use depth buffer at offset 0x19b4000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x3ff8000
(II) RADEON(0): Will use 32768 kb for textures at offset 0x1ff4000

GushpinBob 06-29-2008 03:12 PM
The last of xorg log (ugh, sorry. Tell me there's a better way of doing this)
Code:
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 8192 kB allocated with handle 0xf8d82000
(II) RADEON(0): [pci] ring handle = 0xf8d82000
(II) RADEON(0): [pci] Ring mapped at 0xb3896000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf8e83000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb7fc7000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf8e84000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xb3696000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf9084000
(II) RADEON(0): [pci] GART Texture map mapped at 0xb31b6000
(II) RADEON(0): [drm] register handle = 0xd8000000
(II) RADEON(0): [dri] Visual configs initialized
Output 68 disable success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1280x768 - 1408 816 0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):  MC_FB_LOCATION  : 0xcbffc800 0xcbffc800
(II) RADEON(0):  MC_AGP_LOCATION  : 0x003f0000
freq: 68930000
best_freq: 68931818
best_feedback_div: 337
best_ref_div: 12
best_post_div: 11
(II) RADEON(0): crtc(0) Clock: mode 68930, PLL 68930
(II) RADEON(0): crtc(0) PLL  : refdiv 12, fbdiv 0x151(337), pdiv 11
Set CRTC PLL success
Set CRTC Timing success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
Output LVDS setup success
Output 23 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output 68 disable success
Blank CRTC 1 success
Disable CRTC 1 success
Output 23 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):  MC_FB_LOCATION  was: 0xcbffc800 is: 0xcbffc800
(WW) RADEON(0):  MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):  MC_FB_LOCATION  : 0xcbffc800 0xcbffc800
(II) RADEON(0):  MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms" "true"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 1282)
(II) RADEON(0): Using hardware cursor 1 (scanline 1285)
(II) RADEON(0): Largest offscreen area available: 1280 x 6902
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "RandRRotation" is not used
(WW) RADEON(0): Option "VendorName" is not used
(WW) RADEON(0): Option "ModelName" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(EE) AIGLX error: dlsym for __driCreateNewScreen_20050727 failed (/usr/lib/xorg/modules/dri/r300_dri.so: undefined symbol: __driCreateNewScreen_20050727)
(EE) AIGLX: reverting to software rendering
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
        compiled for 1.4.0.90, module version = 1.0.0
        ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 203
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Mouse1: Sensitivity: 1
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) TouchPad auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(**) Option "SHMConfig" "on"
(**) Option "RightEdge" "5950"
(**) Option "BottomEdge" "4210"
(**) Option "FingerLow" "35"
(**) Option "FingerHigh" "40"
(**) Option "RTCornerButton" "0"
(**) Option "RBCornerButton" "0"
(**) Option "LTCornerButton" "0"
(**) Option "LBCornerButton" "0"
(--) TouchPad touchpad found
(**) Option "SendCoreEvents"
(**) TouchPad: always reports core events
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) evaluating device (TouchPad)
(II) XINPUT: Adding extended input device "TouchPad" (type: MOUSE)
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) TouchPad auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(--) TouchPad touchpad found
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
Enable CRTC 0 success
Unblank CRTC 0 success
Output 23 enable success
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "LVDS:ddc2" removed.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x768
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 3
My xorg.conf
Code:
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
#    Mode 0666
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
        Identifier    "Simple Layout"
        Screen        "aticonfig-Screen[0]" 0 0
        # Turn off backlight and display
        Option              "SuspendTime" "2"
        InputDevice    "Mouse1" "CorePointer"
#        "AlwaysCore" is now obsolete
        InputDevice    "TouchPad" "SendCoreEvents"
        InputDevice    "Keyboard1" "CoreKeyboard"
#        InputDevice    "Tablet" "AlwaysCore"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
#    RgbPath        "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
#    FontPath  "/usr/lib/X11/fonts/local/"
# The module search path.  The default path is shown here.
        ModulePath  "/usr/lib/xorg/modules"
        ModulePath  "/usr/lib/xorg/modules/input"
        FontPath    "/usr/share/fonts/TTF"
        FontPath    "/usr/share/fonts/OTF"
        FontPath    "/usr/share/fonts/Type1"
        FontPath    "/usr/share/fonts/misc"
        FontPath    "/usr/share/fonts/75dpi/:unscaled"
        FontPath    "/usr/lib/X11/fonts/misc/"
        FontPath    "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath    "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath    "/usr/lib/X11/fonts/Speedo/"
        FontPath    "/usr/lib/X11/fonts/Type1/"
        FontPath    "/usr/lib/X11/fonts/TTF/"
        FontPath    "/usr/lib/X11/fonts/OTF/"
        FontPath    "/usr/lib/X11/fonts/cyrillic/"
        FontPath    "/usr/lib/X11/fonts/75dpi/"
        FontPath    "/usr/lib/X11/fonts/100dpi/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
#      Load        "type1"
#      Load        "xtt"
# This loads the GLX module
# This loads the DRI module
        Load  "glx"
        Load  "dri"
        Load  "drm"
        Load  "dbe"          # Double buffer extension

        SubSection "extmod"
                # don't initialise the DGA extension
                Option            "omit xfree86-dga" 
        EndSubSection

        Load  "freetype"
EndSection

Section "ServerFlags"
        Option            "AIGLX" "on"
        Option            "IgnoreABI" "off"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option    "Protocol"      "Xqueue"
#    Option        "Xleds"      "1 2 3"
#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
#    Option "XkbDisable"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option            "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
        Option            "XkbRules" "xorg"
        Option            "XkbModel" "pc101"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"

# Identifier and driver
# the following line.
#    Option "Protocol"        "Xqueue"
# Mouse-speed setting for PS/2 mouse.
#    Option "Resolution"        "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"        "9600"
#    Option "SampleRate"        "150"
# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.  Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
        Identifier  "Mouse1"
        Driver      "mouse"
        Option            "Protocol" "Auto"        # Auto detect
        Option            "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
        Option            "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
        Option            "Emulate3Buttons"

#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection

Section "InputDevice"
        Driver            "synaptics"
        Identifier  "TouchPad"
        Option            "SendCoreEvents"
        Option            "Protocol" "auto-dev"
        Option            "RightEdge" "5950"
        Option            "BottomEdge" "4210"
        Option            "MinSpeed" "0.06"
        Option            "MaxSpeed" "0.12"
        Option            "AccelFactor" "0.0009"
        Option            "FingerLow" "35"
        Option            "FingerHigh" "40"
        Option            "RTCornerButton" "0"
        Option            "RBCornerButton" "0"
        Option            "LTCornerButton" "0"
        Option            "LBCornerButton" "0"
        Option            "SHMConfig" "on"
EndSection

#Section "InputDevice"
#        Identifier  "Tablet"
#        Driver      "fpit"
#        Option            "Device" "/dev/ttyS0"
#        Option            "BaudRate" "19200"
#        Option            "AlwaysCore" "on"
#        Option            "MinimumXPosition" "400"
#        Option            "MinimumYPosition" "400"
#        Option            "MaximumXPosition" "12550"
#        Option            "MaximumYPosition" "7650"
#        Option            "SendCoreEvents"
#        Option            "InvertY"
#        Option            "TrackRandR"
#        Option            "ZAxisMapping" "4 5 6 7"
#        Option            "ButtonThreshold" "17"
#        Option            "ReportingMode" "Scaled"
#        Option            "Name" "FinePoint Pen"
#EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync        30-64        # multisync
#    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
        Identifier  "My Monitor"
        HorizSync    31.5 - 57.0
        VertRefresh  50.0 - 90.0
EndSection

Section "Monitor"

        # 96 DPI at 1280x768
        Identifier  "aticonfig-Monitor[0]"
        DisplaySize  338        203
        Option            "VendorName" "ATI Proprietary Driver"
        Option            "ModelName" "Generic Autodetecting Monitor"
        Option            "DPMS" "true"
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset        "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam        256
#    Clocks        25.2 28.3
        Identifier  "Standard VGA"
        Driver      "vga"
        VendorName  "Unknown"
        BoardName  "Unknown"
EndSection

Section "Device"

    #VideoRam    262144
    # Insert Clocks lines here if appropriate
        Identifier  "* Generic VESA compatible"
        Driver      "vesa"
EndSection

Section "Device"

        Option      "RandRRotation"    "on"
        Identifier  "aticonfig-Device[0]"
        Driver      "ati"
#        Option            "VideoOverlay" "off" # Depricated on Radeon X1050 and Newer
#        Option            "OpenGLOverlay" "off"
#        Option            "OverlayOnCRTC2" "0"
#        Option            "UseFastTLS" "1"
#        Option            "KernelModuleParm" "locked-userpages=0"
        Option            "Accel" "Yes"
#        Option            "EnablePrivateBackZ" "no"
#        Option            "BackingStore" "on"
#        Option            "XAANoOffScreenPixMaps" "true"
#        Option            "ForceMonitors" "notv"
#        Option      "AddARGBGLXVisuals" "true"
#        # Make 2D rendering much faster (with few side effects)
#        Option            "TexturedXrender" "true"
##        Option            "Textured2D" "true"
#        Option            "TexturedVideo" "true"
EndSection

Section "Screen"
        Identifier "Screen 1"
        Device    "* Generic VESA compatible"
        Monitor    "My Monitor"
        DefaultDepth    24
        SubSection "Display"
                Viewport  0 0
                Depth    8
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Viewport  0 0
                Depth    16
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Viewport  0 0
                Depth    24
                Modes    "1280x768" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device    "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth    24
        SubSection "Display"
                Viewport  0 0
                Depth    24
                Modes    "1280x768" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode        0666
EndSection

Section "Extensions"
        Option      "RENDER"    "1"
        Option      "DAMAGE"        "1"
        Option            "Composite" "1"
        Option            "XVideo"        "1"
EndSection
For the record, I am using kernel 2.6.24.4 with agpgart compiled in and modules drm and radeon (and yes, I do make sure that the modules drm and radeon are running before starting Xorg). I'm not willing to take the easy way out and just start over with Slackware 12.1, although this option is on the table if and only if there is no way to get dri to work on my computer.

Also, is the mesa, drm, xf86 driver compilation enough? In other words, do I also need to recompile Xorg (using version 1.4.0.90) and/or upgrade the kernel? I have to admit, this is my first time installing and dealing with new open source graphics drivers. Thank you greatly in advance for anybody that can help. :)

XavierP 06-29-2008 05:03 PM
Moved to Slackware as requested.

the3dfxdude 06-29-2008 05:19 PM
Quote:
Originally Posted by GushpinBob (Post 3198657)
Also, is the mesa, drm, xf86 driver compilation enough?
No.

Quote:
Originally Posted by GushpinBob (Post 3198657)
In other words, do I also need to recompile Xorg (using version 1.4.0.90)
Yes, you're supposed to. Read the dependencies here:
http://dri.freedesktop.org/wiki/Building

Also, the R500 driver from what I understand isn't much more than the R300 one, if it even works that well.

GushpinBob 06-29-2008 05:49 PM
Thank you for your quick response, the3dfxdude. Would I still need to upgrade the kernel in my system? Also, I have always been afraid of compiling Xorg because it seems so... well, daunting without some kind of build script or something. Could I use Patrick's x11.slackbuild for the latest release of xserver (1.4.2) or would that cause too many problems?

the3dfxdude 06-29-2008 06:10 PM
Quote:
Originally Posted by GushpinBob (Post 3198742)
Thank you for your quick response, the3dfxdude. Would I still need to upgrade the kernel in my system? Also, I have always been afraid of compiling Xorg because it seems so... well, daunting without some kind of build script or something. Could I use Patrick's x11.slackbuild for the latest release of xserver (1.4.2) or would that cause too many problems?

You don't need to recompile the kernel. I've found that the instructions on there are sufficient enough to get my RS480 running with 3D. I make my own slackware packages based on the instructions. Now you probably should rebuild more than that, as I've seen errors with missing symbols. But I'm not in a hurry to do the whole x11.slackbuild either. I will probably wait until slackware-current gets updated.

GushpinBob 07-10-2008 05:29 PM
Well, I've waited and finally updated xorg-server 1.4.2 (and other necessary pakages) and I have rebuilt the libdrm, mesa (with the dri drivers), and xf86-video-ati and I still cannot get dri to enable. Anybody have any solutions? I'm nearly at the end of my rope here.

C-Sniper 07-10-2008 05:39 PM
have you tried making the package with the ATI-installer? try doing that and installing the package with the pkgtools. That is what i had to do in order to get it to work for my Radeon Xpress 200M.

GushpinBob 07-10-2008 05:42 PM
ATI Installer? We're talking about the open-source driver, right?

I just want to say that I am using the open-source ati driver and have used src2pkg to create an installable package.

C-Sniper 07-10-2008 06:41 PM
ATI has a proprietary driver out that works quite well. I know that for my card i have to use the proprietary drive otherwise i get very weird problems with the display.

GushpinBob 07-10-2008 07:09 PM
Thanks for your recommendation, but if you read my first post I clearly state that I am trying to move away from fglrx, ATI's proprietary driver. Now yes, I have gotten dri to work on fglrx, hell I've gotten compiz to run on fglrx in the past, but many things were still broken like Xv, slow scrolling in Firefox, corrupted display issues in XFCE, and suspend/resume support. I haven't had any of those problems with the exception of enabling DRI (well, suspend too but that's for another thread) when moving to the latest open source ATI Xorg driver. For now, I'm done with the proprietary driver.

the3dfxdude 07-10-2008 08:29 PM
Did you replace the packages? This is what I currently have on my system:

xf86-video-ati-20080708-i686-1
xf86vidmodeproto-20080526-noarch-1
dri2proto-20080526-noarch-1
libXmu-20080526-i686-1
libXxf86vm-20080526-i686-1
mesa-20080526-i686-1
libdrm-20080526-i686-1
glproto-1.4.9-noarch-1 (official)
xorg-server-1.4.2-i486-1 (official)

I pulled this stuff from from git at freedesktop.org except the official packages. I don't have elaborate build scripts for these yet. Mesa actually was build not according to the link I posted before. The build instructions may be outdated as I have not got 3D using the old instructions anymore. They used to work. So maybe I'll run through the steps again and make some build scripts for you.

My packages work on Rv280 and RS480 (Xpress 200 M) both just fine. Oh, there might be an issue with your R500 w/3D too still. I don't know if that for sure got merged into the main mesa branch.

GushpinBob 07-10-2008 09:14 PM
Thanks for your response, 3Dfxdude :). It looks like that I do need to install/upgrade some of the software you've mentioned in that list. I'll try that and report back during this weekend. Would I need to compile and install those packages in a certain order or could I install them in the order as you have them in that list?

I've heard that 3D is working fine with the R500 based cards for a couple of months now when using the ati driver whereas the RadeonHD driver just implement 2d acceleration.

the3dfxdude 07-10-2008 09:42 PM
The order is probably important. Looking at what I did, I might have done more than necessary. I will get you steps so you can try on your own.

the3dfxdude 07-11-2008 12:19 AM
I went through redoing the packages.

I have these official slack packages now:
xorg-server-1.4.2-i486-1
xf86vidmodeproto-2.2.2-noarch-1
libXmu-1.0.4-i486-1
glproto-1.4.9-noarch-1

This one I have upgraded, but it you might get by with the official package:
libXxf86vm-1.0.2-i686-1

New packages, listed in order I installed them:
xf86-video-ati-20080708-i686-1
libXxf86vm-1.0.2-i686-1
dri2proto-1.1-norarch-1
libdrm-20080710-i686-2
mesa-20080710-i686-2
And the drm and radeon kernel modules

The first 4 simply take a
./configure --prefix=/usr && make
to build them and do a make install into a temp directory, then a makepkg to make the package.

The last two, mesa and the kernel modules I did this:

In the mesa build directory:
Code:
./configure --prefix=/usr --with-dri-drivers="r200,r300,swrast" --with-dri-driverdir=/usr/lib/xorg/modules/dri
gmake
mkdir -p /tmp/dest/usr/bin
make install DESTDIR=/tmp/dest
cp progs/xdemos/{glxcontexts,glxdemo,glxgears,glxgears_fbconfig,glxgears_pixmap,glxheads,glxinfo,glxpbdemo,glxpixmap,glthreads} /tmp/dest/usr/bin
And in the libdrm directory to build the modules:
Code:
cd linux-core
make DRM_MODULES="radeon"
cp *.ko /lib/modules/2.6.26-rc8/kernel/drivers/char/drm
depmod -a
rmmod radeon
rmmod drm
modprobe radeon
You need the kernel source tree configured to your kernel to build the modules.

GushpinBob 07-11-2008 01:17 AM
Thank you kindly for your time to show me how to install these packages. I will report back with the results during sometime this weekend.

GushpinBob 07-13-2008 02:17 PM
Well, I followed exactly what you said and I'm still unable to get dri working. I've tried the latest xf86-video-ati driver from git and I couldn't even get Xorg to start at all :( while getting the error message "(EE) No devices detected". I tried using an older git release from June 28, 2008, but even when Xorg started I still could not get DRI to work. I did another LIBGL_DEBUG=verbose glxinfo and this is what I got as an error:

Code:
libGL: XF86DRIGetClientDriverName: 6.9.0 r300 (screen 0)
libGL: OpenDriver: trying /usr/lib/dri/r300_dri.so
libGL error: dlopen /usr/lib/dri/r300_dri.so failed (/usr/lib/dri/r300_dri.so: undefined symbol: _glapi_Dispatch)
libGL error: unable to load driver: r300_dri.so
Also, ever since I been compiling mesa on my own, I've been getting segfaults on ALL of the programs contained within the progs/xdemos directory that come with mesa.

GushpinBob 07-13-2008 06:27 PM
I think I have found a solution
 
I did a bit of a googling on the error messages glxinfo was spitting out and found this: http://lists.alioth.debian.org/piper...ly/000891.html

When typing LD_PRELOAD="/usr/lib/libGL.so" startx in the command line, I finally get DRI up and running :D. No AIGLX yet:scratch:, though I'll look into that later. Using the official 6.9.0 xf86-video-ati driver ATM but the latest git version seems to be having problems right now so I'll check it out in a couple of days.

the3dfxdude 07-13-2008 08:16 PM
I'm a bit concerned with your environment. I get this for LIBGL_VERBOSE=verbose glxinfo:

libGL: XF86DRIGetClientDriverName: 5.3.0 r300 (screen 0)

You didn't follow my instructions exactly as the modules you have are being found in /usr/lib/dri/r300_dri.so, and slackware doesn't default there. /usr/lib/modules/dri is correct for slackware and I install there.

And rereading you are using slackware 12.0 no? And I'm seeing you are using slackware current packages. It could part of your problem of seg faulting.

GushpinBob 07-13-2008 09:17 PM
You did read my next post, right? Typing 'LD_PRELOAD="/usr/lib/libGL.so" startx' enabled DRI (oops, forgot to mention that the segfaults went away with this command). Yes, I did follow your instructions as explicitly stated in the few posts above (especially the mesa configuration stage) and yes, the modules are installed in /usr/lib/modules/dri (/usr/lib/dri was an automatically created link to /usr/lib/modules/dri. I have no idea why the modules are being searched in the /usr/lib/dri directory though).

Yes, I am using Slackware 12.0, and yes, there are some packages that are from current e.g. xorg-server-1.4.2. To reiterate, the segfaulting goes away when using the LD_PRELOAD variable.

the3dfxdude 07-13-2008 09:34 PM
I understand that the PRELOAD fixes the linkage, but I'm concerned with mixing the old packages with the newer ones. And I don't have to do it on my system. You might want to upgrade, because this is very new stuff you are wanting to run.

As for AIGLX, you might have to rebuild your xserver using the mesa git and probably using the git xserver too. I haven't bothered because I don't use it.


All times are GMT -5. The time now is 12:21 PM.