LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
LinkBack Search this Thread
Old 06-24-2012, 02:31 PM   #1
afreitascs
Member
 
Registered: Aug 2004
Location: Brasil
Distribution: Slackware_Cur-64_mult
Posts: 431

Rep: Reputation: 30
suspend to ram ( sleep) does not work on my Slackware64-current multilib


Previously I clicked on sleep in kde application launcher, and sleep working.
After I updated Mon Mar 26 01:41:11 2012 UTC, using kernel 3.2.13
no more works.

If I click on kde application launcher from sleep, sleep my pc starts and ends, but soon after it gets out. It does not stay sleep!

Any help thanks
 
Old 06-24-2012, 03:00 PM   #2
Darth Vader
Member
 
Registered: May 2008
Location: Romania
Distribution: DARKSTAR Linux 2008.1
Posts: 553

Rep: Reputation: 103Reputation: 103
Post the content of file:

/var/log/pm-suspend.log


And, BTW, when we talk about suspend/hibernate problems, there is a serious hardware and BIOS job. You should post details about every hardware component, the configuration of the peripherals, the loaded modules, kernel, etc...
 
Old 06-24-2012, 03:21 PM   #3
afreitascs
Member
 
Registered: Aug 2004
Location: Brasil
Distribution: Slackware_Cur-64_mult
Posts: 431

Original Poster
Rep: Reputation: 30
Thanks Darth Vader for replies

/var/log/pm-suspend.log

Code:
Initial commandline parameters: 
Sun Jun 24 17:02:33 BRT 2012: Running hooks for suspend.
Running hook /usr/lib64/pm-utils/sleep.d/00logging suspend suspend:
Linux base1 3.2.13 #2 SMP Sat Mar 24 03:43:56 CDT 2012 x86_64 AMD Phenom(tm) II X4 910 Processor AuthenticAMD GNU/Linux
Module                  Size  Used by
pci_stub                1373  1 
vboxpci                14960  0 
vboxnetadp              5811  0 
vboxnetflt             16743  0 
vboxdrv              1787777  3 vboxpci,vboxnetadp,vboxnetflt
snd_seq_dummy           1455  0 
snd_seq_oss            29048  0 
snd_seq_midi_event      5620  1 snd_seq_oss
snd_seq                51265  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5228  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            39183  0 
snd_mixer_oss          15404  1 snd_pcm_oss
ipv6                  279499  24 
it87                   27699  0 
hwmon_vid               3188  1 it87
cpufreq_ondemand        6252  4 
powernow_k8            12747  1 
freq_table              2475  2 cpufreq_ondemand,powernow_k8
mperf                   1171  1 powernow_k8
fuse                   66562  5 
usblp                  11107  0 
nvidia              12290147  40 
snd_hda_codec_via      38939  1 
usbhid                 35615  0 
hid                    82620  1 usbhid
snd_hda_intel          23267  4 
snd_hda_codec          81925  2 snd_hda_codec_via,snd_hda_intel
snd_hwdep               6324  1 snd_hda_codec
snd_pcm                72864  4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              18798  3 snd_seq,snd_pcm
processor              25314  1 powernow_k8
sp5100_tco              4624  0 
thermal_sys            14578  1 processor
evdev                   9574  9 
snd                    57796  17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore               5474  1 snd
snd_page_alloc          7081  2 snd_hda_intel,snd_pcm
sg                     25470  0 
ppdev                   5958  0 
agpgart                27372  1 nvidia
button                  4529  0 
wmi                     8403  0 
i2c_piix4               8152  0 
k10temp                 2843  0 
i2c_core               19978  2 nvidia,i2c_piix4
atl1c                  33022  0 
parport_pc             19423  0 
hwmon                   1329  3 it87,thermal_sys,k10temp
parport                31427  2 ppdev,parport_pc
loop                   18192  0 
             total       used       free     shared    buffers     cached
Mem:       4036892    3665448     371444          0     434164    2190184
-/+ buffers/cache:    1041100    2995792
Swap:      6796284          0    6796284

/usr/lib64/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib64/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/01grub suspend suspend:

/usr/lib64/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-generic suspend suspend:
Can't open RFKILL control device: No such file or directory

/usr/lib64/pm-utils/sleep.d/49bluetooth-generic suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-ibm suspend suspend:

/usr/lib64/pm-utils/sleep.d/49bluetooth-ibm suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib64/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib64/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib64/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/95led suspend suspend:

/usr/lib64/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.

/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib64/pm-utils/sleep.d/99video suspend suspend: success.
Sun Jun 24 17:02:35 BRT 2012: performing suspend
Sun Jun 24 17:02:44 BRT 2012: Awake.
Sun Jun 24 17:02:44 BRT 2012: Running hooks for resume
Running hook /usr/lib64/pm-utils/sleep.d/99video resume suspend:
VT_DISALLOCATE: Device or resource busy
deallocvt: could not deallocate console 63

/usr/lib64/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/95led resume suspend:

/usr/lib64/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib64/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/90clock resume suspend:

/usr/lib64/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib64/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-ibm resume suspend:

/usr/lib64/pm-utils/sleep.d/49bluetooth-ibm resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-generic resume suspend:
Can't open RFKILL control device: No such file or directory

/usr/lib64/pm-utils/sleep.d/49bluetooth-generic resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/01grub resume suspend:

/usr/lib64/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib64/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/00logging resume suspend:

/usr/lib64/pm-utils/sleep.d/00logging resume suspend: success.
Sun Jun 24 17:02:46 BRT 2012: Finished.
lsmod

Code:
Module                  Size  Used by
pci_stub                1373  1 
vboxpci                14960  0 
vboxnetadp              5811  0 
vboxnetflt             16743  0 
vboxdrv              1787777  3 vboxpci,vboxnetadp,vboxnetflt
snd_seq_dummy           1455  0 
snd_seq_oss            29048  0 
snd_seq_midi_event      5620  1 snd_seq_oss
snd_seq                51265  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5228  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            39183  0 
snd_mixer_oss          15404  1 snd_pcm_oss
ipv6                  279499  24 
it87                   27699  0 
hwmon_vid               3188  1 it87
cpufreq_ondemand        6252  4 
powernow_k8            12747  1 
freq_table              2475  2 cpufreq_ondemand,powernow_k8
mperf                   1171  1 powernow_k8
fuse                   66562  5 
usblp                  11107  0 
nvidia              12290147  40 
snd_hda_codec_via      38939  1 
usbhid                 35615  0 
hid                    82620  1 usbhid
snd_hda_intel          23267  2 
snd_hda_codec          81925  2 snd_hda_codec_via,snd_hda_intel
snd_hwdep               6324  1 snd_hda_codec
snd_pcm                72864  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              18798  2 snd_seq,snd_pcm
processor              25314  1 powernow_k8
sp5100_tco              4624  0 
thermal_sys            14578  1 processor
evdev                   9574  9 
snd                    57796  15 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore               5474  1 snd
snd_page_alloc          7081  2 snd_hda_intel,snd_pcm
sg                     25470  0 
ppdev                   5958  0 
agpgart                27372  1 nvidia
button                  4529  0 
wmi                     8403  0 
i2c_piix4               8152  0 
k10temp                 2843  0 
i2c_core               19978  2 nvidia,i2c_piix4
atl1c                  33022  0 
parport_pc             19423  0 
hwmon                   1329  3 it87,thermal_sys,k10temp
parport                31427  2 ppdev,parport_pc
loop                   18192  0

hardware


Quote:
asus motherboard M4A78LT LE-M

CPU AMD Phenom 2 x4 910

geforce 9500GT video card

0801 version of bios

ST3500418AS 500gb hdd

Kingston memory 4G (2x2G)

PSU Antec Neo Eco 400C
SetupBios ---> Power ----> Power Settings

Quote:
Suspend Mode [AUTO]
ACPI 2.0 Support [ENABLE]
ACPI APIC Support [ENABLE]

kernel 3.2.13


my syslog 17:02 Hrs

Code:
Jun 24 15:53:43 base1 org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Jun 24 16:19:24 base1 org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Jun 24 16:22:28 base1 org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Jun 24 16:23:43 base1 org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Jun 24 16:23:58 base1 org.kde.powerdevil.backlighthelper: QDBusConnection: system D-Bus connection created before QCoreApplication. Application may misbehave.
Jun 24 17:02:44 base1 kernel: [18704.552927] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jun 24 17:02:44 base1 kernel: [18704.564204] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jun 24 17:02:44 base1 kernel: [18704.575266] Suspending console(s) (use no_console_suspend to debug)
Jun 24 17:02:44 base1 kernel: [18706.345687] Disabling non-boot CPUs ...
Jun 24 17:02:44 base1 kernel: [18706.347140] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Jun 24 17:02:44 base1 kernel: [18706.347140] perf: IBS APIC setup failed on cpu #1
Jun 24 17:02:44 base1 kernel: [18706.349328] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Jun 24 17:02:44 base1 kernel: [18706.349328] perf: IBS APIC setup failed on cpu #2
Jun 24 17:02:44 base1 kernel: [18706.351355] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Jun 24 17:02:44 base1 kernel: [18706.351355] perf: IBS APIC setup failed on cpu #3
Jun 24 17:02:44 base1 kernel: [18707.452208] usblp 3-2:1.0: no reset_resume for driver usblp?
Jun 24 17:02:44 base1 kernel: [18709.815626] Restarting tasks ... done.
Jun 24 17:23:29 base1 dhcpcd[1932]: eth0: open_udp_socket: Cannot assign requested address
Jun 24 17:27:23 base1 kernel: [    0.000000] ACPI: RSDP 00000000000fb470 00024 (v02 ACPIAM)
Jun 24 17:27:23 base1 kernel: [    0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 011711 XSDT1036 20110117 MSFT 00000097)
Jun 24 17:27:23 base1 kernel: [    0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 011711 FACP1036 20110117 MSFT 00000097)
Jun 24 17:27:23 base1 kernel: [    0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
Jun 24 17:27:23 base1 kernel: [    0.000000] ACPI: DSDT 00000000cfe90450 0D41A (v01  A1467 A1467001 00000001 INTL 20060113)

Last edited by afreitascs; 06-24-2012 at 04:14 PM.
 
Old 06-24-2012, 04:19 PM   #4
Darth Vader
Member
 
Registered: May 2008
Location: Romania
Distribution: DARKSTAR Linux 2008.1
Posts: 553

Rep: Reputation: 103Reputation: 103
Please attach "lspci -vvnn" and "lsusb" output. Also, the full "dmesg" output from booting the system and after the failed suspend.

Also, on that debugging stage, you should disable the loading of the VirtualBox modules, which are well known of badly interacting most times on suspend/hibernate. I even suspect them as the cause of problems.

And, as the first step of tuning, create a file:

/etc/pm/config.d/config

with the content:

Code:
SUSPEND_MODULES="usblp"
Of course, then test if something is changed in suspending...

Last edited by Darth Vader; 06-24-2012 at 04:27 PM.
 
Old 06-24-2012, 09:46 PM   #5
afreitascs
Member
 
Registered: Aug 2004
Location: Brasil
Distribution: Slackware_Cur-64_mult
Posts: 431

Original Poster
Rep: Reputation: 30
Thanks Darth Vader for replies

Quote:
Please attach "lspci -vvnn" and "lsusb" output.
----- lspci -vvnn -----
Code:
root@base1:~# lspci -vvnn
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
        Subsystem: ASUSTeK Computer Inc. Device [1043:8388]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [c4] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=0 UnitCnt=12 MastHost- DefDir- DUL-
                Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
                Revision ID: 3.00
                Link Frequency 0: [b]
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [54] HyperTransport: UnitID Clumping
        Capabilities: [40] HyperTransport: Retry Mode
        Capabilities: [9c] HyperTransport: #1a
        Capabilities: [f8] HyperTransport: #1c

00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fa000000-feafffff                                                                               
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff                                                  
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-                        
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-                                                         
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-                                                           
        Capabilities: [50] Power Management version 3                                                                         
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag+ RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #2, PowerLimit 75.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0f00c  Data: 4159
        Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device [1043:8388]
        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [110 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: feb00000-febfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
                        ExtTag+ RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #3, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep+ BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
                        Slot #6, PowerLimit 25.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0f00c  Data: 4161
        Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device [1043:8388]
        Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [110 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Kernel driver in use: pcieport
        Kernel modules: shpchp

00:11.0 SATA controller [0106]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at c000 [size=8]
        Region 1: I/O ports at b000 [size=4]
        Region 2: I/O ports at a000 [size=8]
        Region 3: I/O ports at 9000 [size=4]
        Region 4: I/O ports at 8000 [size=16]
        Region 5: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] SATA HBA v1.0 InCfgSpace
        Kernel driver in use: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:12.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f9ffc000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f9ffb000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 19
        Region 0: Memory at f9fff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [c0] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+
        Capabilities: [e4] Debug port: BAR=1 offset=00e0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c)
        Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx-
        Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: piix4_smbus
        Kernel modules: sp5100_tco, i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ff00 [size=16]
        Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit-
                Address: 00000000  Data: 0000
        Kernel driver in use: pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
        Subsystem: ASUSTeK Computer Inc. Device [1043:840c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: snd_hda_intel
        Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f9ffa000 (32-bit, non-prefetchable) [size=4K]
        Kernel driver in use: ohci_hcd
        Kernel modules: ohci-hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
                Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
                Revision ID: 3.00
                Link Frequency: [b]
                Link Error: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD- ExtRS- UCnfE-

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k10temp
        Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: ZOTAC International (MCO) Ltd. Device [19da:7046]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
        Region 5: I/O ports at dc00 [size=128]
        [virtual] Expansion ROM at fea80000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
                LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [128 v1] Power Budgeting <?>
        Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel driver in use: nvidia
        Kernel modules: nvidia, nouveau, nvidiafb

02:00.0 Ethernet controller [0200]: Atheros Communications AR8131 Gigabit Ethernet [1969:1063] (rev c0)
        Subsystem: ASUSTeK Computer Inc. Device [1043:83fe]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at ec00 [size=128]
        Capabilities: [40] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0f00c  Data: 4179
        Capabilities: [58] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
                        ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Capabilities: [6c] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Connection timed out
                Not readable
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt+ UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [180 v1] Device Serial Number ff-29-b1-08-f4-6d-04-ff
        Kernel driver in use: atl1c
        Kernel modules: atl1c

root@base1:~#
---- lsusb -----

Quote:
root@base1:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port
Bus 005 Device 002: ID 15d9:0a37 Trust International B.V. Mouse
root@base1:~#
Quote:
Of course, then test if something is changed in suspending...
I removed VirtualBox...unfortunately, nothing has changed!
again thanks
Attached Files
File Type: txt dmesg.txt (54.1 KB, 0 views)
File Type: txt dmesg_after.txt (54.1 KB, 0 views)

Last edited by afreitascs; 06-24-2012 at 09:52 PM.
 
Old 06-25-2012, 11:07 PM   #6
afreitascs
Member
 
Registered: Aug 2004
Location: Brasil
Distribution: Slackware_Cur-64_mult
Posts: 431

Original Poster
Rep: Reputation: 30
It's probably a problem with the kernel or slackware, because I did a clean install slackware 13:37 and no problem.
Also the problem appeared after I upgrade the current on the day Mon Mar 26 01:41:11 UTC 2012.
Furthermore, I have windows 7 installed on another partition of my hdd, and windows7, "sleep" works correctly ...

no problem with my machine!

I think this may be related to:

Quote:
VT_DISALLOCATE: Device or resource busy
deallocvt: could not deallocate console 63
in
/var/log/pm-suspend.log

....
...
..
./
 
Old 06-26-2012, 05:09 PM   #7
Darth Vader
Member
 
Registered: May 2008
Location: Romania
Distribution: DARKSTAR Linux 2008.1
Posts: 553

Rep: Reputation: 103Reputation: 103
Looks like your problem is right in kernel, maybe an unlucky driver...

After latest slackware-current update, to kernel 3.2.21, still you have problems?

BTW, you should not worry much about VT_DISALLOCATE, the single bad news is that you have activated a phantom console with number 63 (theoretically accessible with CTRL+ALT+F63).
 
Old 06-26-2012, 05:44 PM   #8
afreitascs
Member
 
Registered: Aug 2004
Location: Brasil
Distribution: Slackware_Cur-64_mult
Posts: 431

Original Poster
Rep: Reputation: 30
thank you for the replies Darth Vader

I am not a scholar in linux. I use slackware since version 9.1, but I only (think I) know the basics. Nevertheless, I like Slackware!

I was doing experiments ...

I uninstalled nvidia drivers. When I used "sleep" the machine beeps. (!?) And black screen (no video) !

my /var/log/pm-suspend.log, this experience.
Code:
Initial commandline parameters: 
Tue Jun 26 14:22:50 BRT 2012: Running hooks for suspend.
Running hook /usr/lib64/pm-utils/sleep.d/00logging suspend suspend:
Linux base1 3.2.21 #2 SMP Sun Jun 24 11:55:51 CDT 2012 x86_64 AMD Phenom(tm) II X4 910 Processor AuthenticAMD GNU/Linux
Module                  Size  Used by
snd_seq_dummy           1455  0 
snd_seq_oss            29048  0 
snd_seq_midi_event      5620  1 snd_seq_oss
snd_seq                51265  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5228  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            39183  0 
snd_mixer_oss          15404  1 snd_pcm_oss
ipv6                  279755  22 
it87                   27699  0 
hwmon_vid               3188  1 it87
cpufreq_ondemand        6252  4 
powernow_k8            12747  1 
freq_table              2475  2 cpufreq_ondemand,powernow_k8
mperf                   1171  1 powernow_k8
fuse                   66562  5 
usblp                  11107  0 
usbhid                 35615  0 
hid                    82652  1 usbhid
snd_hda_codec_via      39035  1 
snd_hda_intel          23267  0 
snd_hda_codec          81925  2 snd_hda_codec_via,snd_hda_intel
snd_hwdep               6324  1 snd_hda_codec
snd_pcm                72864  3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
sp5100_tco              4624  0 
k10temp                 2843  0 
sg                     25470  0 
processor              25592  1 powernow_k8
agpgart                27372  0 
snd_timer              18798  2 snd_seq,snd_pcm
snd                    57796  11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore               5474  1 snd
atl1c                  33022  0 
snd_page_alloc          7081  2 snd_hda_intel,snd_pcm
i2c_piix4               8152  0 
i2c_core               19978  1 i2c_piix4
ppdev                   5958  0 
parport_pc             19423  0 
parport                31427  2 ppdev,parport_pc
thermal_sys            14578  1 processor
hwmon                   1329  3 it87,k10temp,thermal_sys
wmi                     8403  0 
evdev                   9574  4 
button                  4529  0 
loop                   18192  0 
             total       used       free     shared    buffers     cached
Mem:       4036928     655144    3381784          0      69140     443400
-/+ buffers/cache:     142604    3894324
Swap:      6796284          0    6796284

/usr/lib64/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib64/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/01grub suspend suspend:

/usr/lib64/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-generic suspend suspend:
Can't open RFKILL control device: No such file or directory

/usr/lib64/pm-utils/sleep.d/49bluetooth-generic suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-ibm suspend suspend:

/usr/lib64/pm-utils/sleep.d/49bluetooth-ibm suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib64/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib64/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib64/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/95led suspend suspend:

/usr/lib64/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
No quirk database entry for this system, using default.

/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
Allocated buffer at 0x11000 (base is 0x0)
ES: 0x1100 EBX: 0x0000

/usr/lib64/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jun 26 14:22:52 BRT 2012: performing suspend
Tue Jun 26 14:23:02 BRT 2012: Awake.
Tue Jun 26 14:23:02 BRT 2012: Running hooks for resume
Running hook /usr/lib64/pm-utils/sleep.d/99video resume suspend:
Function not supported
VT_DISALLOCATE: Device or resource busy
deallocvt: could not deallocate console 63

/usr/lib64/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
Saving last known working quirks: --quirk-vbe-post --quirk-dpms-on 
                            --quirk-dpms-suspend --quirk-vbestate-restore
			    --quirk-vbemode-restore --quirk-vga-mode-3

/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/95led resume suspend:
/usr/lib64/pm-utils/functions: line 53:  3475 Hangup                  "$@"

After I reinstalled the nvidia drivers again tried to "sleep".

my /var/log/pm-suspend.log.
Code:
Initial commandline parameters: 
Tue Jun 26 19:37:54 BRT 2012: Running hooks for suspend.
Running hook /usr/lib64/pm-utils/sleep.d/00logging suspend suspend:
Linux base1 3.2.21 #2 SMP Sun Jun 24 11:55:51 CDT 2012 x86_64 AMD Phenom(tm) II X4 910 Processor AuthenticAMD GNU/Linux
Module                  Size  Used by
snd_seq_dummy           1455  0 
snd_seq_oss            29048  0 
snd_seq_midi_event      5620  1 snd_seq_oss
snd_seq                51265  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5228  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            39183  0 
snd_mixer_oss          15404  1 snd_pcm_oss
ipv6                  279755  24 
it87                   27699  0 
hwmon_vid               3188  1 it87
cpufreq_ondemand        6252  4 
powernow_k8            12747  1 
freq_table              2475  2 cpufreq_ondemand,powernow_k8
mperf                   1171  1 powernow_k8
fuse                   66562  5 
nvidia              12281691  40 
usblp                  11107  0 
usbhid                 35615  0 
hid                    82652  1 usbhid
sg                     25470  0 
ppdev                   5958  0 
sp5100_tco              4624  0 
snd_hda_codec_via      39035  1 
parport_pc             19423  0 
parport                31427  2 ppdev,parport_pc
processor              25592  1 powernow_k8
thermal_sys            14578  1 processor
k10temp                 2843  0 
agpgart                27372  1 nvidia
i2c_piix4               8152  0 
button                  4529  0 
atl1c                  33022  0 
i2c_core               19978  2 nvidia,i2c_piix4
snd_hda_intel          23267  4 
snd_hda_codec          81925  2 snd_hda_codec_via,snd_hda_intel
hwmon                   1329  3 it87,thermal_sys,k10temp
wmi                     8403  0 
evdev                   9574  9 
snd_hwdep               6324  1 snd_hda_codec
snd_pcm                72864  4 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer              18798  3 snd_seq,snd_pcm
snd                    57796  17 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore               5474  1 snd
snd_page_alloc          7081  2 snd_hda_intel,snd_pcm
loop                   18192  0 
             total       used       free     shared    buffers     cached
Mem:       4036928    1606820    2430108          0      86636     646036
-/+ buffers/cache:     874148    3162780
Swap:      6796284          0    6796284

/usr/lib64/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib64/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/01grub suspend suspend:

/usr/lib64/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-generic suspend suspend:
Can't open RFKILL control device: No such file or directory

/usr/lib64/pm-utils/sleep.d/49bluetooth-generic suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-ibm suspend suspend:

/usr/lib64/pm-utils/sleep.d/49bluetooth-ibm suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib64/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib64/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib64/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/95led suspend suspend:

/usr/lib64/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.

/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib64/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jun 26 19:37:55 BRT 2012: performing suspend
Tue Jun 26 19:38:04 BRT 2012: Awake.
Tue Jun 26 19:38:04 BRT 2012: Running hooks for resume
Running hook /usr/lib64/pm-utils/sleep.d/99video resume suspend:

/usr/lib64/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib64/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/95led resume suspend:

/usr/lib64/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib64/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/90clock resume suspend:

/usr/lib64/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib64/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-ibm resume suspend:

/usr/lib64/pm-utils/sleep.d/49bluetooth-ibm resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/49bluetooth-generic resume suspend:
Can't open RFKILL control device: No such file or directory

/usr/lib64/pm-utils/sleep.d/49bluetooth-generic resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/01grub resume suspend:

/usr/lib64/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib64/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib64/pm-utils/sleep.d/00logging resume suspend:

/usr/lib64/pm-utils/sleep.d/00logging resume suspend: success.
Tue Jun 26 19:38:05 BRT 2012: Finished.

Notice, that no longer appears

Quote:
VT_DISALLOCATE: Device or resource busy
deallocvt: Could not deallocate console 63
Quote:
After latest slackware-current update, to kernel 3.2.21, still you have problems?
Still in the same situation after upgrading current! The new kernel did not help me!
 
Old 06-26-2012, 10:57 PM   #9
afreitascs
Member
 
Registered: Aug 2004
Location: Brasil
Distribution: Slackware_Cur-64_mult
Posts: 431

Original Poster
Rep: Reputation: 30
Hi Darth Vader

I solved the problem! My printer is HP Deskjet 680c (it's old I know) and it uses the parallel port.

I use a "USB to Parallel Cable".

http://www.omega.com.tw/USB-Cable.asp I do not know if this is but it's very similar ... look attachment .

Intuitively, I decided to remove the cable from the PC. And "sleep" worked!

The strange thing is that using kernel slackware 13:37, "sleep" works with the cable!

Thank you for your kindness!
Attached Images
File Type: jpg USP1284.jpg (4.3 KB, 48 views)
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
upgrading slackware64 13.1 multilib to slackware64 -current multilib Cultist Slackware 4 03-12-2011 09:04 AM
[SOLVED] Slackware64-current don't work pm-suspend but. .. ROXR Slackware 4 02-28-2010 04:32 AM
Slackware64 current multilib, do the 32 bit packages need to be updated as well? damgar Slackware 11 02-01-2010 11:08 AM
[SOLVED] Slackware64-current multilib: Many improvements, few snags gargamel Slackware 7 11-15-2009 07:23 AM
Problem with sleep (suspend-to-ram, S3) Jessard Linux - Laptop and Netbook 7 02-15-2009 09:17 PM


All times are GMT -5. The time now is 02:41 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration