LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (https://www.linuxquestions.org/questions/slackware-14/)
-   -   Some Dmesg errors on Slackware64 14.0... (https://www.linuxquestions.org/questions/slackware-14/some-dmesg-errors-on-slackware64-14-0-a-4175441173/)

raphaeldavidf 12-12-2012 12:46 PM
Some Dmesg errors on Slackware64 14.0...
 
1 Attachment(s)
hey guys,

I'm getting some errors and I couldn't find useful info on how to solve then. If any one have some hints I would be very glad.

my dmesg output is in the topic...

guanx 12-12-2012 02:24 PM
Your computer temperature is so high. Can you try to cool it down first? Then see if there are still errors.

raphaeldavidf 12-12-2012 05:08 PM
Where did you saw that? My computer temperature is 42~45 in normal use, and 39~41 in idle...I think that is pretty normal temperature...

H_TeXMeX_H 12-13-2012 02:17 AM
I would run memtest86+, GIMPS test mode 1, and maybe a smartctl long test.

guanx 12-13-2012 12:51 PM
Quote:
Originally Posted by raphaeldavidf (Post 4848058)
Where did you saw that? My computer temperature is 42~45 in normal use, and 39~41 in idle...I think that is pretty normal temperature...
I saw the machine check exceptions. This might be unimportant, depending on your kernel version.

So which errors are you referring to when you wrote "I'm getting some errors and I couldn't find useful info"?

raphaeldavidf 12-13-2012 01:20 PM
Quote:
Originally Posted by H_TeXMeX_H (Post 4848265)
I would run memtest86+, GIMPS test mode 1, and maybe a smartctl long test.
Just finished all tests, no errors at all...

I think that I've found the solution for these errors:
Code:
[18425.953896] ata1.00: configured for UDMA/133
[18425.953910] ata1: EH complete
[18425.954252] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[18426.227042] EXT4-fs (sda1): re-mounted. Opts: user_xattr,commit=600
[25394.608929] ata1: hard resetting link
[25394.915885] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[25394.928710] ata1.00: configured for UDMA/133
[25394.928807] ata1: EH complete
[25394.929032] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[25395.114882] EXT4-fs (sda1): re-mounted. Opts: user_xattr,commit=0
[25396.152465] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
[25396.152474] ata2.00: irq_stat 0x00400000, PHY RDY changed
[25396.152481] ata2: SError: { PHYRdyChg CommWake }
[25396.152488] sr 1:0:0:0: CDB: cdb[0]=0x4a: 4a 01 00 00 10 00 00 00 08 00
[25396.152514] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in
[25396.152517]          res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
[25396.152523] ata2.00: status: { DRDY }
[25396.152534] ata2: hard resetting link
[25396.876882] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[25396.882547] ata2.00: configured for UDMA/100
[25396.896872] ata2: EH complete
in this bug report:https://bugs.launchpad.net/ubuntu/+s...ux/+bug/539467, but I didn't tried it out yet...

raphaeldavidf 12-13-2012 01:32 PM
Quote:
Originally Posted by guanx (Post 4848675)
I saw the machine check exceptions. This might be unimportant, depending on your kernel version.

So which errors are you referring to when you wrote "I'm getting some errors and I couldn't find useful info"?
I still don't have much useful info on these errors:

Code:
[19490.885416] [Hardware Error]: Machine check events logged
[19803.996581] CPU1: Package power limit notification (total events = 40)
[19803.996586] CPU2: Package power limit notification (total events = 39)
[19803.996589] CPU3: Package power limit notification (total events = 39)
[19803.996592] CPU0: Package power limit notification (total events = 40)
[19803.996852] CPU1: Package power limit normal
[19803.996854] CPU3: Package power limit normal
[19803.996857] CPU2: Package power limit normal
[19803.996859] CPU0: Package power limit normal
[19940.654604] [Hardware Error]: Machine check events logged
[20137.573388] CPU2: Package power limit notification (total events = 99)
[20137.573394] CPU3: Package power limit notification (total events = 99)
[20137.573401] CPU1: Package power limit notification (total events = 101)
[20137.573406] CPU0: Package power limit notification (total events = 101)
[20137.575775] CPU1: Package power limit normal
[20137.575779] CPU2: Package power limit normal
[20137.575782] CPU3: Package power limit normal
[20137.575784] CPU0: Package power limit normal
Code:
[26227.035935] xhci_hcd 0000:05:00.0: PME# disabled
[26227.035972] xhci_hcd 0000:05:00.0: setting latency timer to 64
[26227.249634] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[26227.281102] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[26227.289110] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[26227.294087] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
Code:
[31167.700455] TCP: Peer 84.215.200.47:25288/58465 unexpectedly shrunk window 2835469989:2835469994 (repaired)
[31170.323063] TCP: Peer 84.215.200.47:25288/58465 unexpectedly shrunk window 2835469989:2835469994 (repaired)
[63657.115974] cfg80211: Calling CRDA to update world regulatory domain
[63657.497211] cfg80211: World regulatory domain updated:
[63657.497218] cfg80211:  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[63657.497224] cfg80211:  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[63657.497229] cfg80211:  (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[63657.497233] cfg80211:  (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[63657.497238] cfg80211:  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[63657.497242] cfg80211:  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[63658.378340] wlan0: authenticate with 00:21:29:77:77:43
[63658.399674] wlan0: send auth to 00:21:29:77:77:43 (try 1/3)
[63658.600043] wlan0: send auth to 00:21:29:77:77:43 (try 2/3)
[63658.626767] wlan0: authenticated
[63658.627215] ath9k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
[63658.639004] wlan0: associate with 00:21:29:77:77:43 (try 1/3)
[63658.707352] wlan0: RX AssocResp from 00:21:29:77:77:43 (capab=0x401 status=0 aid=1)
[63658.707438] wlan0: associated
[63777.211390] cfg80211: Calling CRDA to update world regulatory domain
[63777.217266] cfg80211: World regulatory domain updated:
[63777.217273] cfg80211:  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[63777.217280] cfg80211:  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[63777.217287] cfg80211:  (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[63777.217292] cfg80211:  (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[63777.217298] cfg80211:  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[63777.217303] cfg80211:  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[63778.250759] wlan0: authenticate with 00:21:29:77:77:43
[63778.272087] wlan0: send auth to 00:21:29:77:77:43 (try 1/3)
[63778.472567] wlan0: send auth to 00:21:29:77:77:43 (try 2/3)
[63778.673457] wlan0: send auth to 00:21:29:77:77:43 (try 3/3)
[63778.675651] wlan0: authenticated
[63778.676003] ath9k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
[63778.687409] wlan0: associate with 00:21:29:77:77:43 (try 1/3)
[63778.888295] wlan0: associate with 00:21:29:77:77:43 (try 2/3)
[63779.089192] wlan0: associate with 00:21:29:77:77:43 (try 3/3)
[63779.290145] wlan0: association with 00:21:29:77:77:43 timed out
[63786.275854] wlan0: authenticate with 00:21:29:77:77:43
[63786.296769] wlan0: send auth to 00:21:29:77:77:43 (try 1/3)
[63786.299071] wlan0: authenticated
[63786.299362] ath9k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
[63786.311486] wlan0: associate with 00:21:29:77:77:43 (try 1/3)
[63786.313935] wlan0: RX AssocResp from 00:21:29:77:77:43 (capab=0x401 status=0 aid=1)
[63786.314020] wlan0: associated
Code:
[    0.738412]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.738517] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.741440] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.742039] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.742693] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.743391] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.744048] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.744743] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.745333] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.745923] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
Code:
[    8.752483] acer_wmi: Get 0x1 Device Status failed: 0xe2 - 0x0
[    8.753408] acer_wmi: Get Current Device Status failed: 0xe2 - 0x0
Code:
[  10.909121] [drm] MTRR allocation failed.  Graphics performance may suffer.
Thanks for the hand! ;D

H_TeXMeX_H 12-14-2012 03:11 AM
I would recommend upgrading the kernel to 3.4.x or 3.6.x.

It may be a bug in the kernel:
http://ubuntuforums.org/showthread.php?t=1785211

raphaeldavidf 12-18-2012 02:39 PM
Quote:
Originally Posted by H_TeXMeX_H (Post 4849110)
I would recommend upgrading the kernel to 3.4.x or 3.6.x.

It may be a bug in the kernel:
http://ubuntuforums.org/showthread.php?t=1785211
Most errors were fixed with kernel 3.6.6(3.4.x didn't). Some minor errors appeared, but all were easily fixable.

Thanks to all for the help!


All times are GMT -5. The time now is 03:51 PM.