LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (http://www.linuxquestions.org/questions/slackware-14/)
-   -   slackware+printing (http://www.linuxquestions.org/questions/slackware-14/slackware-printing-136765/)

kgm 01-20-2004 01:18 PM

slackware+printing
 
Hello *,


I install the apsfiler program for Slackware. Setup and configured the printer but when printing nothing appaears on the paper.

The "lpq" shows my active job before printing and is empty flushing th e print queue.

Does anyone have any suggestions ?

Please reply.

Thank you.

kgm.

reclusivemonkey 01-20-2004 01:28 PM

What version of slackware are you running and what make and model are your printer? If you post more information you are more likely to get a reply. Its hard to diagnose with so little information.

kgm 01-20-2004 02:35 PM

Hello *,

I apologize.

I am running slackware current ; my printer is HP6P attached to my LPT1 port.

Any suggestion is appreciated.

kgm.

reclusivemonkey 01-20-2004 04:07 PM

I found using CUPS was easier that apsfilter with my USB printer. You may find this method easier. Simply use pkgtool to alter the services and run the CUPS server. You can then run the CUPS server without having to reboot by doing (as root of course):-

chmod u+x /etc/rc.d/rc.cups

to make the file executable, then

/etc/rc.d/rc.cups start

to start the cups server. The open your browser and type in localhost:631 which will take you to the cups configuration. Manage Printer then Add Printer will take you to the right bit. You only need to fill a name in, then select your printer from the device list on the next page. As long as your LPT1 is working it should be recognized. CUPS supports the 6P, I checked in the list. Good luck!

Harp00 01-28-2004 10:07 AM

Hi. I would like to install and configure my HP Deskjet 930 C. I am running Slackware 9.0 and using KDE 3.1.
I can not find any tool in order to install a printer, so i decided to enter in to this thread.
I have not CUPS. Does anybody explain me how can i know if i have some programs that can make me install a printer?
Should i download and install CUPS?

kgm 01-28-2004 10:18 AM

Hello Harpo:

Installing printer on Slackware is relatively easy.

Slackware uses apsfilter program to install printers.

Instructions:

1. cd /usr/share/apsfilter
2. run ./SETUP
3. Follow instructions on screen until installation is complete.

ps. You might have to try several printer drivers (if not found from the drivers list) to troubleshoot printing problems.

But once the driver is install print using : lp -Pprinter_name file_to_print.

Hope this helps.

kgm

Harp00 01-28-2004 10:49 AM

Great! Thank you very much.

kgm 01-28-2004 01:27 PM

Hello harpoo:

Make sure you have all the right libraries install esp. those use by X windows.

kgm.

dont_smoke 01-28-2004 03:39 PM

lexmark z33
 
Hello all

I have a lexmark z33, usb. I tried to use cups and aps filter to install it, but without success, the printer never replies anything. Is still with hope of making it with cups, I just dont know what usb device to choose
heres what shows up when I do lsusb

Unknown line at line 1809
Duplicate HUT Usage Spec at line 2650
Bus 005 Device 001: ID 0000:0000 Virtual Hub
Bus 005 Device 002: ID 043d:0021 Lexmark International Inc.
Bus 005 Device 003: ID 0915:8101 GlobeSpan, Inc.
Bus 004 Device 001: ID 0000:0000 Virtual Hub
Bus 003 Device 001: ID 0000:0000 Virtual Hub
Bus 002 Device 001: ID 0000:0000 Virtual Hub
Bus 001 Device 001: ID 0000:0000 Virtual Hub

if you have another alternative for installing the printer please reply
Help me please
Thanks

Harp00 01-29-2004 08:41 AM

I installed my printer but if i try to print something it crashes, and this is the message.

/usr/bin/lpr -P 'DeskJet930C' '-#1' '/tmp/kde-franco/kdeprint_CuS8wf3' : esecuzione fallita con il messaggio
Status Information, attempt 1 of 3: sending job 'franco@frakko74+498' to DeskJet930C@localhost connecting to 'localhost', attempt 1 connected to 'localhost' requesting printer DeskJet930C@localhost job 'franco@frakko74+498' transfer to DeskJet930C@localhost failed error 'NONZERO RFC1179 ERROR CODE FROM SERVER' with ack 'ACK_FAIL' sending str '^BDeskJet930C' to DeskJet930C@localhost error msg: 'spool queue for 'deskjet930c' does not exist on server frakko74.libero.it' error msg: ' non-existent printer or you need to run 'checkpc -f'' Waiting 10 seconds before retry Status Information, attempt 2 of 3: sending job 'franco@frakko74+498' to DeskJet930C@localhost connecting to 'localhost', attempt 1 connected to 'localhost' requesting printer DeskJet930C@localhost job 'franco@frakko74+498' transfer to DeskJet930C@localhost failed error 'NONZERO RFC1179 ERROR CODE FROM SERVER' with ack 'ACK_FAIL' sending str '^BDeskJet930C' to DeskJet930C@localhost error msg: 'spool queue for 'deskjet930c' does not exist on server frakko74.libero.it' error msg: ' non-existent printer or you need to run 'checkpc -f'' Waiting 10 seconds before retry sending job 'franco@frakko74+498' to DeskJet930C@localhost connecting to 'localhost', attempt 1 connected to 'localhost' requesting printer DeskJet930C@localhost job 'franco@frakko74+498' transfer to DeskJet930C@localhost failed error 'NONZERO RFC1179 ERROR CODE FROM SERVER' with ack 'ACK_FAIL' sending str '^BDeskJet930C' to DeskJet930C@localhost error msg: 'spool queue for 'deskjet930c' does not exist on server frakko74.libero.it' error msg: ' non-existent printer or you need to run 'checkpc -f''

Which is the problem?


All times are GMT -5. The time now is 02:12 PM.