LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices



Reply
 
Search this Thread
Old 05-22-2009, 08:35 AM   #16
Hangdog42
LQ Veteran
 
Registered: Feb 2003
Location: Maryland
Distribution: Slackware
Posts: 7,791
Blog Entries: 1

Rep: Reputation: 414Reputation: 414Reputation: 414Reputation: 414Reputation: 414

Quote:
Originally Posted by andrew.46 View Post
Hi Hangdog,



Can I ask if you used the stock 12.2 kernel or did you need a custom kernel?

Andrew
I've been using a stock kernel. In fact, I think (despite advice to the contrary) I'm using hugesmp. The only tweak I've had to do is compile and install Broadcom's wireless driver to support the wireless card. That was easy and works great with wicd. All the other hardware has worked from the get-go. For what it is worth, when I got the Mini, 12.2 hadn't been released, so I tried installing 12.1, and that wouldn't install no matter what I did. However, 12.2 installed smoothly.

Last edited by Hangdog42; 05-22-2009 at 08:36 AM.
 
Old 05-22-2009, 10:36 AM   #17
Crashbox
Member
 
Registered: Jun 2004
Location: USA
Distribution: Slackware
Posts: 136

Rep: Reputation: 21
Quote:
Originally Posted by gsl View Post
Slackware 12.2 and a custom 2.6.29 kernel works fine on my 701. The install is straightforward using the usbboot.img with the Slackware disk sets on another USB drive. I used some of the ACPI scripts from slackeee.strangled.net. The webcam was the biggest hassle but I only got it working as an exercise -- I wouldn't bother with it in future.

Geoff.
Thanks for the info...now I must find some time. The inclusion of the drivers for the Atheros wireless chip in the 2.6.29 kernel certainly make life easier. A working webcam would be nice, but I have other machines with working cams so whatever...

Btw, I'm assuming you went with no swap partition and the 'noatime' setting to minimize writes to the SSD. Oh, and would you be willing to share your kernel .config file. I feel like such a newb for asking, but free time is way limited right now.
 
Old 05-22-2009, 07:15 PM   #18
gsl
LQ Newbie
 
Registered: Jun 2007
Location: Melbourne, Australia
Distribution: Slackware
Posts: 24

Rep: Reputation: 5
Quote:
Originally Posted by Crashbox View Post
Btw, I'm assuming you went with no swap partition and the 'noatime' setting to minimize writes to the SSD.
That's correct. I nuked the original partitions and created a single partition. I have never attempted to get suspend-to-disk working. Suspend-to-ram works fine and it doesn't take long to boot or shutdown.

Quote:
Oh, and would you be willing to share your kernel .config file. I feel like such a newb for asking, but free time is way limited right now.
See attached. No guarantees that it is perfect but it works for me and should get you started. It is just the original Asus .config that I keep running through "make oldconfig". I build the kernel on my desktop PC, make a Slackware package out of it (kernel and modules in one) and install using installpkg/upgradepkg.

Geoff.
Attached Files
File Type: txt config-2.6.29.3-gsl-eeepc701.txt (52.1 KB, 22 views)
 
Old 05-22-2009, 07:22 PM   #19
Unr3a164
Member
 
Registered: Apr 2007
Distribution: Slackware 13.1 + Ubuntu 9.04
Posts: 143

Original Poster
Rep: Reputation: 16
What I would ultimately like to do is do what I did with my old Gateway computer, which is triple boot my computer between windows, slackware, and ubuntu. My only question is how do I setup the slackware dvd iso on a flash drive as bootable?
 
Old 05-22-2009, 09:45 PM   #20
Crashbox
Member
 
Registered: Jun 2004
Location: USA
Distribution: Slackware
Posts: 136

Rep: Reputation: 21
Quote:
Originally Posted by gsl View Post

See attached. No guarantees that it is perfect but it works for me and should get you started. It is just the original Asus .config that I keep running through "make oldconfig". I build the kernel on my desktop PC, make a Slackware package out of it (kernel and modules in one) and install using installpkg/upgradepkg.

Geoff.
I really appreciate it. A kernel stripped down to match the hardware is always the best option, IMHO, and it's how I roll on all my other machines. Your config file will give me a nice working kernel that I can tweak later if I have the time and/or need.
 
Old 05-22-2009, 11:17 PM   #21
gsl
LQ Newbie
 
Registered: Jun 2007
Location: Melbourne, Australia
Distribution: Slackware
Posts: 24

Rep: Reputation: 5
Quote:
Originally Posted by Unr3a164 View Post
My only question is how do I setup the slackware dvd iso on a flash drive as bootable?
I don't know if that's possible. My standard way to install from a flash drive is make a bootable flash drive using usbboot.img (in usb-and-pxe-installers/ on the DVD, check out README_USB.TXT in the same dir) and have some or all of the slackware/ disk sets on another flash drive which you have plugged in at bootup. Then choose "Hard drive partition" for your source media and follow the instructions.

Geoff.
 
Old 05-23-2009, 08:40 AM   #22
Crashbox
Member
 
Registered: Jun 2004
Location: USA
Distribution: Slackware
Posts: 136

Rep: Reputation: 21
Quote:
Originally Posted by Unr3a164 View Post
My only question is how do I setup the slackware dvd iso on a flash drive as bootable?
Might I suggest UNetbootin
 
Old 05-24-2009, 03:52 AM   #23
kadeck
LQ Newbie
 
Registered: May 2009
Posts: 8

Rep: Reputation: 0
Hi Unr3a164,

is the internal microphone works on your s10 with slackware?, since it's the only problem i have under ubuntu
 
Old 05-24-2009, 07:39 AM   #24
Mark Pettit
Member
 
Registered: Dec 2008
Location: Cape Town, South Africa
Distribution: Slackware 14.1 64 Multi-Lib
Posts: 439

Rep: Reputation: 138Reputation: 138
Quote:
Originally Posted by Crashbox View Post
Might I suggest UNetbootin
You may certainly suggest it, but I can't see any reason why you should.
The home page of unetbootin does NOT claim to be able to install Slackware. Further reading of other pages on the site also make no such claims. If you managed to get it working, could you expand your suggestion into a How-To please.
 
Old 05-24-2009, 08:49 AM   #25
Crashbox
Member
 
Registered: Jun 2004
Location: USA
Distribution: Slackware
Posts: 136

Rep: Reputation: 21
Quote:
Originally Posted by Mark Pettit View Post
You may certainly suggest it, but I can't see any reason why you should.
The home page of unetbootin does NOT claim to be able to install Slackware. Further reading of other pages on the site also make no such claims. If you managed to get it working, could you expand your suggestion into a How-To please.
Please note that in the very first paragraph on the main UNetbootin page, under "Introduction", it states the following:

"or supply your own Linux .iso file if you've already downloaded one or your preferred distribution isn't on the list."

Additionally, under the section titled 'Installing Other Distributions Using UNetbootin' on the main page you'll see a nice screen shot illustrating how to use an ISO file you've already downloaded.

In fact, I see nothing on the entire UNetbootin page that suggests it can't handle a Slackware iso file.

To answer your question, no I haven't used UNetbootin with a Slackware iso yet. Haven't needed to...but that may change soon. If I do, I'll be sure to come back and let everyone know how it went.

My question to you is: have you tried Unetbootin with Slackware and had it fail? Perhaps a recounting of your experience (if you've had one) would be more beneficial to the community. If you have nothing else to offer, please take your negativity elsewhere.
 
Old 05-25-2009, 01:32 AM   #26
Mark Pettit
Member
 
Registered: Dec 2008
Location: Cape Town, South Africa
Distribution: Slackware 14.1 64 Multi-Lib
Posts: 439

Rep: Reputation: 138Reputation: 138
Quote:
Originally Posted by Crashbox View Post
Please note that in the very first paragraph on the main UNetbootin page, under "Introduction", it states the following:

"or supply your own Linux .iso file if you've already downloaded one or your preferred distribution isn't on the list."

Additionally, under the section titled 'Installing Other Distributions Using UNetbootin' on the main page you'll see a nice screen shot illustrating how to use an ISO file you've already downloaded.

In fact, I see nothing on the entire UNetbootin page that suggests it can't handle a Slackware iso file.

To answer your question, no I haven't used UNetbootin with a Slackware iso yet. Haven't needed to...but that may change soon. If I do, I'll be sure to come back and let everyone know how it went.

My question to you is: have you tried Unetbootin with Slackware and had it fail? Perhaps a recounting of your experience (if you've had one) would be more beneficial to the community. If you have nothing else to offer, please take your negativity elsewhere.
@Crashbox

Yes - I tried Unetbootin about a year ago. It failed. I can't remember the details. I was disappointed because it seems to work for Slax, Vector and Zenwalk - all Slack derivatives. So I was quite surprised that it didn't work - but then if it did, it would surely claim that ?

As far as negativity - giving advice that you have not personally tested and proved to work is rather low. This entire website is based on the giving of useful advice. If you didn't know something for certain (and you just claimed that), then at least qualify the suggestion with a "I haven't tried this but ...."
 
Old 05-25-2009, 10:00 AM   #27
koloth
Member
 
Registered: Jun 2004
Location: Athens, Greece
Distribution: Slackware 13.1
Posts: 98

Rep: Reputation: 17
current

Quote:
Originally Posted by Nylex View Post
Such as? I also run 12.2 on an AAO.
I have some issues with the SSD on current, It seems to deny access when some process is using it (for example i cannot write something to the disk while copying a file). I'm still to find a solution...
 
Old 05-25-2009, 11:08 AM   #28
Crashbox
Member
 
Registered: Jun 2004
Location: USA
Distribution: Slackware
Posts: 136

Rep: Reputation: 21
Quote:
Originally Posted by Mark Pettit View Post

Yes - I tried Unetbootin about a year ago. It failed. I can't remember the details.
Thank you for making my point. Instead of responding in a way that made it sound like Slackware expressly did not work with UNetbootin, you could have said: "hey, I tried it a year ago and it didn't work. maybe it's worth another look."

UNetbootin may very well work with Slack now and it may very well be the solution to the guy's problem. Your previous response though, would have turned him off of it completely. I gave him a suggestion of where to start.

And for the record, I've used UNetbootin with iso files from several distros 'not included' and have had no trouble, nor have I found anything which would lead me to believe Slack won't work now. But you're right, I haven't done it. Maybe someone who has could enlighten both of us.


Quote:
Originally Posted by Mark Pettit View Post

As far as negativity - giving advice that you have not personally tested and proved to work is rather low. This entire website is based on the giving of useful advice. If you didn't know something for certain (and you just claimed that), then at least qualify the suggestion with a "I haven't tried this but ...."
Unless I'm able to provide additional assistance to someone who needs it, I won't be posting anymore in this thread. I've been hanging around here for some time now and I think I'm pretty familiar with LQ and it's goals. I'm not terribly interested in etiquette advice from a guy whose only been here a few months.
 
Old 05-25-2009, 01:12 PM   #29
BobNutfield
Senior Member
 
Registered: Dec 2005
Location: United Kingdom
Distribution: Fedora , Ubuntu, Slackware-Current
Posts: 1,477

Rep: Reputation: 51
Quote:
And for the record, I've used UNetbootin with iso files from several distros 'not included' and have had no trouble, nor have I found anything which would lead me to believe Slack won't work now. But you're right, I haven't done it. Maybe someone who has could enlighten both of us.
I, too, have tried unetbootin on a number of distros, including Slackware. As Crashbox states, the installation can be any iso. I have only had two distros fail to boot, and, unfortuantely one of them was Slackware 12.2. I got a module error that initial needed modules couldn't be loaded. I do intend to try it again this week. All I want to do is get enough installed to get a network install started. I do believe it will work, but I cannot confirm that because my only attempt failed.

Bob
 
Old 05-25-2009, 02:01 PM   #30
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
Quote:
Originally Posted by koloth View Post
I have some issues with the SSD on current, It seems to deny access when some process is using it (for example i cannot write something to the disk while copying a file). I'm still to find a solution...
I'd heard that there were problems like this with the SSD devices. For this reason (and that of capacity), I opted for a regular hard drive. Unfortunately, I can't be any help, I'm afraid.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
slackware newbie... sylvania g netbook no audio output from headphone jack jmd9qs Slackware 8 04-26-2009 04:22 PM
LXer: A Linux Netbook Done The Right Way: the Sylvania g Netbook Meso LXer Syndicated Linux News 0 04-01-2009 06:20 PM
Dual booting, Slackware and Compaq Mini702EA netbook labrat0157 Linux - Laptop and Netbook 3 03-31-2009 03:53 AM
LXer: Netbook Nightmare: My Experience With the Sylvania g Netbook LXer Syndicated Linux News 0 02-13-2009 06:41 PM
LXer: HP breaks the netbook mold with the Mini 1000 and MIE Linux netbook LXer Syndicated Linux News 0 10-31-2008 02:50 AM


All times are GMT -5. The time now is 04:48 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration