Skype problem on webcam
Here's the error log when I ran skype in command;
Skype V4L2: Could not find a suitable capture format Skype V4L2: Could not find a suitable capture format Starting the process... Skype Xv: Xv ports available: 33 Skype XShm: XShm support enabled Skype Xv: Using Xv port 158 Skype Xv: No suitable overlay format found I'm using ArkMicro FSC WebCam V30S,so I do think it's supported in linux.Furthermore,my web cam can be detected so I think it's just down to some tricks to get my cam working.Any idea? |
Found this page which is for Linux USB devices and mentions your camera as being supported. Check it out !
|
Quote:
|
Have you tried other programs that use the webcam ? skype is not the best program to determine if the camera works, because it doesn't work well.
|
Not really.I have VLC but I don't really know how to test my camera with VLC.What other program can be used?Kopete on the other hand crashed immediately when I clicked video section of the configuration.
|
Quote:
To use just goto "File->Open Capture Device" and choose the correct "Video device name". Mine is /dev/video0. Then click "Stream/Save" and select "Settings" next to "Stream/Save" select "Play Locally" and you should get your camera output displayed in a window. |
Quote:
|
How did you install the uvc drivers ? I recommend you try the latest version.
|
The uvc driver should be available from my kernel itself.By the way,I use kernel 2.6.29.4 and I'm sure my kernel has built-in support of v4l and uvc.
|
To get my camera (not the same as yours) working I had to make some changes.
If I recall correctly -- and I STRONGLY suggest you check these ideas out before you jump right in -- the following might do the trick: rm /lib/udev/rules/60-persistent-v4l.rules rm -r /dev/v4l Now it works with 2.6.29 and SW 12.2, tested on Konqueror and Skype. Good luck! |
Doesn't work too.
|
In this page someone solves his problem in a stange way:
http://forums.fedoraforum.org/showthread.php?t=192616 He basically reverts to an older version, but I don't think that's the ideal solution. I'd suggest that you check the following points: - Check that you are using the correct and latest drivers for your video card. - Do you have compiz etc. on? If so, try turning it off. - When compiling your kernel, did you enable v4l1 compatibility support? |
Quote:
-I have KWin compositing turned on,but I turned them off and ran skype again and the problem did not go away. -I'm sure I enabled v4l1 compatibility support in my kernel. |
Again, I recommend trying different versions of the uvc driver. With my camera some versions work, some don't ...
|
Quote:
And I installed luvcview and another error when I ran luvcview; luvcview version 0.2.1 Video driver: x11 A window manager is available video /dev/video0 Unable to set format: 22. Init v4L2 failed !! exit fatal |
All times are GMT -5. The time now is 01:27 PM. |