I installed the linux wlan drivers for my Linksys WPC11 Wireless Network PCMCIA, and when I insert the card, I get a resource in use error. Here is what dmesg reports:
Code:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
PCI: Found IRQ 11 for device 02:00.0
PCI: Sharing IRQ 11 with 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 02:00.1
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000410
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000006
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
prism2cs_init: prism2_cs.o: 0.2.1-pre20 Loaded
prism2cs_init: dev_info is: prism2_cs
prism2_cs: RequestIRQ: Resource in use
prism2sta_config: NextTuple failure? It's probably a Vcc mismatch.
prism2sta_event: prism2_cs: Initialization failed!
I am running a custom compiled 2.4.22 kernel. Has anyone ever seen this before, or know what might be causing it?