LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
Reload this Page Radeon kms works!
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices


Reply
Page 5 of 10 « First 34 5 67 Last »
  Search this Thread
Old 12-21-2009, 07:19 PM   #61
adamk75
Senior Member
 
Registered: May 2006
Posts: 3,091

Rep: Reputation: 399Reputation: 399Reputation: 399Reputation: 399

I have used KMS on a radeon x1900, x1300, and x1650, all of which use the r300 DRI driver. Can you show us the /var/log/Xorg.0.log file that is generated?

Adam
 
Old 12-21-2009, 07:53 PM   #62
mkoco
Member
 
Registered: Feb 2008
Location: US, New Jersey
Distribution: Slackware
Posts: 88

Rep: Reputation: 17
Sure, here it is:

Code:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux waterStone 2.6.32.2 #5 SMP Mon Dec 21 01:19:21 EST 2009 i686
Build Date: 03 August 2009  06:51:50PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 21 20:50:04 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Wide Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "card0"
(==) No monitor specified for screen "Wide Screen".
	Using a default monitor configuration.
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1de0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:7145:1028:2002 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 6.12.99
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
	ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) [KMS] Kernel modesetting enabled.
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(II) RADEON(0): PCIE card detected
(II) RADEON(0): KMS Color Tiling: disabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): Output VGA-0 using monitor section External LCD
(**) RADEON(0): Option "RightOf" "Integrated LCD"
(II) RADEON(0): Output LVDS using monitor section Integrated LCD
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): EDID vendor "DEL", prod id 12295
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
(II) RADEON(0): Output LVDS using initial mode 1280x854
(II) RADEON(0): mem size init: gart size :20000000 vram size: s:8000000 visible:7c00000
(II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
(**) RADEON(0): Display dimensions: (340, 270) mm
(**) RADEON(0): DPI set to (203, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.4.0
	ABI class: X.Org Video Driver, version 5.0
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): [DRI2] Setup complete
(II) RADEON(0): Front buffer size: 11008K
(II) RADEON(0): VRAM usage limit set to 104371K
(==) RADEON(0): Backing store disabled
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 734 x 275
(II) RADEON(0): Allocate new frame buffer 2560x1024 stride 2560
(II) RADEON(0): VRAM usage limit set to 105062K
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event6"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event7"
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE)
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) filter chain progression: 2.00
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) filter stage 0: 20.00 ms
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) set acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes.
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) RADEON(0): EDID vendor "LPL", prod id 0
(II) RADEON(0):     EDID quirk: Detailed timings give sizes in cm.
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1440x900"x0.0   96.21  1440 1504 1536 1760  900 901 904 912 -hsync -vsync (54.7 kHz)
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
 
Old 12-22-2009, 03:59 AM   #63
adamk75
Senior Member
 
Registered: May 2006
Posts: 3,091

Rep: Reputation: 399Reputation: 399Reputation: 399Reputation: 399
Well your log file looks perfectly normal, but did you see on page 3 of this thread where the OP mentions that there's a bug with 2.6.32.2? You may want to try a different kernel.

Adam
 
Old 12-22-2009, 12:46 PM   #64
mkoco
Member
 
Registered: Feb 2008
Location: US, New Jersey
Distribution: Slackware
Posts: 88

Rep: Reputation: 17
Well, everything is functioning with 2.6.32.1! I need to read more carefully.

Its a bit sluggish with xcompmgr-- windows are rendering very buggy; disappearing/re-appearing, and conky is playing hide and seek. But at least all the rest of it works. glxgears shows better framerates without KMS, but the window rendering and general performance seems better anyway.

Well, at least that's done.. time to clean my desk my desk, I think.. oi..

 
Old 12-22-2009, 04:54 PM   #65
BrZ
Member
 
Registered: Apr 2009
Distribution: Slackware
Posts: 543

Rep: Reputation: 121Reputation: 121
Mesa 7.6.1 and 7.7 are out today =]
 
Old 12-23-2009, 12:19 AM   #66
mkoco
Member
 
Registered: Feb 2008
Location: US, New Jersey
Distribution: Slackware
Posts: 88

Rep: Reputation: 17
Well! I'll give those a whirl.
 
Old 12-24-2009, 12:35 AM   #67
Josh000
Member
 
Registered: Aug 2009
Distribution: Slackware 13 64bit
Posts: 534

Rep: Reputation: 35
Hello,

I am worried I may not be following the instructions entirely correctly.

libdrm compiled and a package was installed, but is it correct that there should be no description, and the package was created within the same directory as the slackbuild and not in /tmp?

I can't get mesa to compile at all...I have uploaded the output of trying to run the mesa.Slackbuild. From what I can tell, the system type is not set, although it should be set in the build?
Attached Files
File Type: txt problems.txt (9.3 KB, 24 views)
 
Old 12-24-2009, 02:03 AM   #68
dolphin77
Member
 
Registered: May 2009
Location: Odesa, Ukraine
Distribution: Slackware
Posts: 206

Original Poster
Rep: Reputation: 60
Hi,

missing of decription files is one of 'simplifyings'. It is normal from my point of view. It shouldn't affect working of the software.

Are you on 32 bit? my scripts by default assumes 64 bit system. Modify $ARCH to suit your system.
 
Old 12-24-2009, 02:54 AM   #69
Josh000
Member
 
Registered: Aug 2009
Distribution: Slackware 13 64bit
Posts: 534

Rep: Reputation: 35
Yes, I am on 64bit, and my ARCH is always set to "x86_64".
 
Old 12-24-2009, 03:35 AM   #70
dolphin77
Member
 
Registered: May 2009
Location: Odesa, Ukraine
Distribution: Slackware
Posts: 206

Original Poster
Rep: Reputation: 60
Quote:
Originally Posted by Josh000 View Post
Yes, I am on 64bit, and my ARCH is always set to "x86_64".
The log you provided is incomplete. I didn't find the source of problem there. Maybe I missed something.

Generally yo need to install in this order:

libdrm
xf86-video-ati
mesa

after you build each package, you should upgrade it in your system. Since each following package depends on previous one.
The last line in my scripts moves package from /tmp to current dir. I did it for my personal preference. You are free to remove it if you prefer /tmp.

For newer (up to date) xf86-video-ati you need to update util-macros package. look above for the building script and git clone reference.
Last edited by dolphin77; 12-24-2009 at 03:37 AM.
 
Old 12-24-2009, 03:40 AM   #71
Josh000
Member
 
Registered: Aug 2009
Distribution: Slackware 13 64bit
Posts: 534

Rep: Reputation: 35
OK,

I was trying to compile mesa after libdrm, just because in the first posts I think that was the order and I didn't notice any order to the contrary.

I will update util-macros and then try xf86-video-ati and mesa.

Thanks for your help.
 
Old 12-24-2009, 07:20 PM   #72
Josh000
Member
 
Registered: Aug 2009
Distribution: Slackware 13 64bit
Posts: 534

Rep: Reputation: 35
OK, I have built and installed the latest util-macros package, as well as the libdrm and xf86-video-ati packages from the provided slackbuilds.

When trying to run the mesa slackbuild however, I get the following error

Code:
checking for DRI2PROTO... configure: error: Package requirements (dri2proto >= 1.99.3) were not met:

No package 'dri2proto' found
I did not find anything about dri2proto in this thread...should I grab it from git or somewhere as well?
 
Old 12-25-2009, 02:02 AM   #73
dolphin77
Member
 
Registered: May 2009
Location: Odesa, Ukraine
Distribution: Slackware
Posts: 206

Original Poster
Rep: Reputation: 60
Quote:
Originally Posted by Josh000 View Post
OK, I have built and installed the latest util-macros package, as well as the libdrm and xf86-video-ati packages from the provided slackbuilds.

When trying to run the mesa slackbuild however, I get the following error

Code:
checking for DRI2PROTO... configure: error: Package requirements (dri2proto >= 1.99.3) were not met:

No package 'dri2proto' found
I did not find anything about dri2proto in this thread...should I grab it from git or somewhere as well?
No. It is in slackware64/x/ directory.
 
Old 12-25-2009, 04:30 AM   #74
BroX
Member
Contributing Member
 
Registered: Oct 2003
Location: Sweden
Distribution: Slackware64-current, SlackwareARM-15.0
Posts: 833

Rep: Reputation: 90
Quote:
Originally Posted by dolphin77 View Post
Generally you need to install in this order:
Correct me if I'm wrong, but I think the right build order is
libdrm -> mesa -> xf86-video-ati
 
Old 12-25-2009, 05:18 AM   #75
dolphin77
Member
 
Registered: May 2009
Location: Odesa, Ukraine
Distribution: Slackware
Posts: 206

Original Poster
Rep: Reputation: 60
Yoop.

Just checked again. For newer xorg the right order should be libdrm, xf86-video-ati, mesa.

But for the slackware shipped stuff, xf86-video-ati will not build without mesa installed (it will argue about some missing GL stuff).

But mesa should be installed later than xf86-video-ati, otherwise it is linked wrongly...

It is kind of linked circle.

Not sure how 'coshere' is this, but what I did (when installed this stuff for the first time):
1) removepkg libdrm mesa xf86-video-ati
2) build and installed libdrm
3) build and installed mesa
4) build and installed xf86-video-ati
5) build and upgraded --reinstalled mesa

Once again I am not expert, but I read a lot of x.org wikies, phoronix and etc and they argue, that mesa should be installed later.
 
  


Reply
Page 5 of 10 « First 34 5 67 Last »



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Linux KMS Intel 865G: Hacking KMS to use vesa... or disable hardware acceleration eantoranz Linux - Hardware 1 08-01-2009 12:58 PM
KMS with radeon gives garbled screen with x onlyolli Linux - Software 0 06-29-2009 04:14 PM
LXer: TTM, Radeon KMS Support Goes Into Linux 2.6.31 LXer Syndicated Linux News 0 06-17-2009 06:11 PM
LXer: The KMS, Plymouth Experience In Fedora 10 LXer Syndicated Linux News 0 11-28-2008 02:40 AM
Radeon 9600 Pro 2.6.6 Works, 2.6.7 doesn't AlgebraicSpore Linux - Hardware 4 07-14-2004 05:36 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware

All times are GMT -5. The time now is 12:13 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration