LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (https://www.linuxquestions.org/questions/slackware-14/)
-   -   PC does not power-off after shutdown (https://www.linuxquestions.org/questions/slackware-14/pc-does-not-power-off-after-shutdown-464892/)

AndiH 07-17-2006 11:23 AM
PC does not power-off after shutdown
 
:confused: Hi there.

When i shutdown my notebook it does not power off automatically. Everytime i have to turn it off seperatly with the power-button.

Does somebody know what to change, so that it will work corectly?

Thanx

Matir 07-17-2006 11:29 AM
What distribution are you using? You may try booting with the kernel argument acpi=off or acpi=force to see if those help. (Some notebooks have buggy acpi that require these)

MS3FGX 07-17-2006 11:34 AM
In Slackware, you have to edit /etc/rc.d/rc.modules to enable APM.

Specifically, uncomment the last line of this section:

Code:
#### APM support ###
# APM is a BIOS specification for saving power using several different
# techniques. This is mostly useful for battery powered laptops.
#/sbin/modprobe apm

Matir 07-17-2006 11:40 AM
Oops, sorry that I missed that this was the slack forum. Got to the thread via the Zero-replies search.

bonowax 07-18-2006 09:07 AM
Hi;

If you didn't compile the kernel yourself, then chances are you chose 'bare.i' for the installation and for booting afterwards. 'bare.i' carries only APM support and needs '/sbin/modprobe apm' to be enabled in '/etc'rc.modules' .

The ideal, though, would be to have used 'bareacpi.i' or else recompile your kernel with ACPI support - assuming your hardware supports it, which is the case for almost everything from pIII and over.

I hope this info helps...

Regards


All times are GMT -5. The time now is 09:08 AM.