mice doesn't work on sw 12.1
first off all, I'm from croatia, and my english is not good :D..
well, i have updated sw12.0 to sw12.1.. after that update i had to install nvidia drivers again, and then i have started X... when i started x, my mice didn't work... this is my xorg.conf Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig |
You can have a look at the X log (/var/log/Xorg.0.log) for any error during start-up of X.
Otherwise, you can also try to modify the mouse protocol in /etc/X11/xorg.conf to "Auto" to see what X automatically selects. |
look like no problem there:
Code:
(II) GLX: Initialized MESA-PROXY GL provider for screen 0 |
From the CHANGES_AND_HINTS.TXT file:
Quote:
Check if psmouse is loaded: Code:
lsmod | grep psmouse |
Hi nOp!
I've just upgraded from 12.0 to 12.1 and my mice stopped working too. To fix this I needed to recompile the kernel choosing the right options for my mouse, which seen to be not set by default on Pat's compilation. Don't worry Pat: I still love u and slackware! Before, in 12.0, my amarok and gxine used to be buggy, but they are ok now XD Slack 12.1 is awesome - stable as hell! Thank u Pat!!!!! |
Quote:
|
ok, lets go:
- download the new linux kernel (kernel.org) - unpack it (can be in your home dir, doesn't matter) - cd to the unpacked dir - edit Makefile and set the install path (i.e: /boot/k25) - edit /etc/lilo.conf to include the new kernel image - copy /boot/config-huge-smp-2.6.24.5-smp or config-huge-2.6.24.5 to .config - run $make oldconfig - run $make xconfig - now go in Device Drivers > Input device support - set anything related to your mouse here. - save - run $make - turn to root - create the kernel destination dir (/boot/k25) - cp the lilo.conf that u have edited to /etc - run $make install - run $make modules_install Good luck! it's not so hard as it looks XD |
thx on this, i will try it now
|
Quote:
Um, you've got that backwards. If the psmouse module is NOT loaded, then loading it will almost surely fix the problem. The snippet you posted from CHANGES_AND_HINTS.TXT is correct, however, and that's the part the original poster needs to read. |
It's so nice to have someone from Croatia here,welcome n0p!
About your problem,you should first try what gegechris99 has suggested.Pozdrav. |
well that module isn't loaded, and i think that there is a problem, i have removed it from blacklist, and again it wasn't loaded.. the same problem is with ndiswrapper module :S..
p.s. (alane nemoj zezat da si iz rijeke :D, ja sam 45min od ri, selo bribir xD ) |
Quote:
If so, remove it. That's why I said to read CHANGES_AND_HINTS.TXT. Quote:
rc.modules is one option, but there's a better one - again, see CHANGES_AND_HINTS.TXT. Seriously, the documentation is there for a reason. |
Quote:
Izgleda da ćeš morat kompajlirat kernel,samo naprijed,ako zapneš samo postaj ovdje. Inače ja imam Slackware 12 i nisam imo tih problema. |
Quote:
Thanks, Brian |
Quote:
There are two good options, actually. One is to use rc.modules.local, but you would need to include the top section of the stock rc.modules (the section from the top that updates module dependencies) at the top of the custom rc.modules.local. For example, here's mine (yes, I use this method): Code:
#!/bin/sh The easier way to do it is with rc.netdevice though. The original purpose of that script (which will probably not exist on a fresh installation) was to load networking modules early in the boot process so that the network scripts could finish successfully. Since udev came along though, that's just not needed anymore. However, support for the file is there, and since it's run early in the boot process if it exists, it's a great place to sneak other non-network-related modules in if you need them loaded. * I have to credit Pat with hammering a clue at me on this one - while it's obvious to me now, I'd never considered rc.netdevice for this purpose before. |
All times are GMT -5. The time now is 11:34 AM. |