Logout = Blank Screen(Black)

rc nai · 11-07-2008, 04:13 PM

Last night on nov 6 2008, when I logged out of xfce, my screen went blank as in black. My laptop was still on, mouse lights up, but screen was all black. Ctrl+alt backspace or delete didn't work. I couldn't do anything else and so I held down the power button to shutdown the machine. This only happens sometimes when it's up for 8+ hours. Here is my xorg log file. I have the log file for Nov 7th too, just ask and I'll post it up. Also, I'm using the i810 driver and 915resolution BIOS hack.

Code:

Linux john 2.6.24.5-smp #2 SMP Wed Apr 30 13:41:38 CDT 2008 i686 Intel(R) Celeron(R) M processor 1.30GHz GenuineIntel GNU/Linux

Code:

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)

Xorg log file:

Code:

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux john 2.6.24.5-smp #2 SMP Wed Apr 30 13:41:38 CDT 2008 i686
Build Date: 30 June 2008  11:57:32PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov  6 16:26:47 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local/" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID/" does not exist.
	Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/Speedo/,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/cyrillic/,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled
(**) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d0280
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3580 card 161f,203e rev 02 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 8086,3584 card 161f,203e rev 02 class 08,80,00 hdr 00
(II) PCI: 00:00:3: chip 8086,3585 card 161f,203e rev 02 class 08,80,00 hdr 80
(II) PCI: 00:02:0: chip 8086,3582 card 161f,203e rev 02 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,3582 card 161f,203e rev 02 class 03,80,00 hdr 80
(II) PCI: 00:1d:0: chip 8086,24c2 card 161f,203e rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 161f,203e rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 161f,203e rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 161f,203e rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 161f,203e rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 161f,203e rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 161f,203e rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 161f,2030 rev 03 class 07,03,00 hdr 00
(II) PCI: 02:07:0: chip 104c,8031 card 1400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:07:2: chip 104c,8032 card 161f,203e rev 00 class 0c,00,10 hdr 80
(II) PCI: 02:07:3: chip 104c,8033 card 161f,203e rev 00 class 01,80,00 hdr 80
(II) PCI: 02:08:0: chip 14e4,4401 card 161f,203e rev 01 class 02,00,00 hdr 00
(II) PCI: 02:09:0: chip 14e4,4320 card 17f9,0002 rev 03 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xe0200000 - 0xe02fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:7:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared)
(--) PCI:*(0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/27, 0xe0000000/19, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/27, 0xe0080000/19
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xe0208000 - 0xe0209fff (0x2000) MX[B]
	[1] -1	0	0xe0206000 - 0xe0207fff (0x2000) MX[B]
	[2] -1	0	0xe0204000 - 0xe0205fff (0x2000) MX[B]
	[3] -1	0	0xe0200000 - 0xe0203fff (0x4000) MX[B]
	[4] -1	0	0xe020a000 - 0xe020a7ff (0x800) MX[B]
	[5] -1	0	0xe0100800 - 0xe01008ff (0x100) MX[B]
	[6] -1	0	0xe0100c00 - 0xe0100dff (0x200) MX[B]
	[7] -1	0	0x40000000 - 0x400003ff (0x400) MX[B]
	[8] -1	0	0xe0100000 - 0xe01003ff (0x400) MX[B]
	[9] -1	0	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[10] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[11] -1	0	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[12] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[13] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[14] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[15] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[16] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[17] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[18] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]
	[19] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[20] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[21] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[23] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[24] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[25] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[26] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xe0208000 - 0xe0209fff (0x2000) MX[B]
	[1] -1	0	0xe0206000 - 0xe0207fff (0x2000) MX[B]
	[2] -1	0	0xe0204000 - 0xe0205fff (0x2000) MX[B]
	[3] -1	0	0xe0200000 - 0xe0203fff (0x4000) MX[B]
	[4] -1	0	0xe020a000 - 0xe020a7ff (0x800) MX[B]
	[5] -1	0	0xe0100800 - 0xe01008ff (0x100) MX[B]
	[6] -1	0	0xe0100c00 - 0xe0100dff (0x200) MX[B]
	[7] -1	0	0x40000000 - 0x400003ff (0x400) MX[B]
	[8] -1	0	0xe0100000 - 0xe01003ff (0x400) MX[B]
	[9] -1	0	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[10] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[11] -1	0	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[12] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[13] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[14] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[15] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[16] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[17] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[18] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]
	[19] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[20] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[21] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[23] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[24] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[25] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[26] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xe0208000 - 0xe0209fff (0x2000) MX[B]
	[5] -1	0	0xe0206000 - 0xe0207fff (0x2000) MX[B]
	[6] -1	0	0xe0204000 - 0xe0205fff (0x2000) MX[B]
	[7] -1	0	0xe0200000 - 0xe0203fff (0x4000) MX[B]
	[8] -1	0	0xe020a000 - 0xe020a7ff (0x800) MX[B]
	[9] -1	0	0xe0100800 - 0xe01008ff (0x100) MX[B]
	[10] -1	0	0xe0100c00 - 0xe0100dff (0x200) MX[B]
	[11] -1	0	0x40000000 - 0x400003ff (0x400) MX[B]
	[12] -1	0	0xe0100000 - 0xe01003ff (0x400) MX[B]
	[13] -1	0	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[14] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[15] -1	0	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[16] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[21] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[23] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[24] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[26] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[27] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[29] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[30] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[31] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[32] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.2
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
	965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset 852GM/855GM found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xe0208000 - 0xe0209fff (0x2000) MX[B]
	[5] -1	0	0xe0206000 - 0xe0207fff (0x2000) MX[B]
	[6] -1	0	0xe0204000 - 0xe0205fff (0x2000) MX[B]
	[7] -1	0	0xe0200000 - 0xe0203fff (0x4000) MX[B]
	[8] -1	0	0xe020a000 - 0xe020a7ff (0x800) MX[B]
	[9] -1	0	0xe0100800 - 0xe01008ff (0x100) MX[B]
	[10] -1	0	0xe0100c00 - 0xe0100dff (0x200) MX[B]
	[11] -1	0	0x40000000 - 0x400003ff (0x400) MX[B]
	[12] -1	0	0xe0100000 - 0xe01003ff (0x400) MX[B]
	[13] -1	0	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[14] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[15] -1	0	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[16] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[21] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[23] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[24] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[26] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[27] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[29] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[30] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[31] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[32] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xe0208000 - 0xe0209fff (0x2000) MX[B]
	[5] -1	0	0xe0206000 - 0xe0207fff (0x2000) MX[B]
	[6] -1	0	0xe0204000 - 0xe0205fff (0x2000) MX[B]
	[7] -1	0	0xe0200000 - 0xe0203fff (0x4000) MX[B]
	[8] -1	0	0xe020a000 - 0xe020a7ff (0x800) MX[B]
	[9] -1	0	0xe0100800 - 0xe01008ff (0x100) MX[B]
	[10] -1	0	0xe0100c00 - 0xe0100dff (0x200) MX[B]
	[11] -1	0	0x40000000 - 0x400003ff (0x400) MX[B]
	[12] -1	0	0xe0100000 - 0xe01003ff (0x400) MX[B]
	[13] -1	0	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[14] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[15] -1	0	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[16] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[17] 1	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 1	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 1	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[23] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[24] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[25] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[26] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[27] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[29] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[30] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[31] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[32] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[33] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[34] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[35] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
	[36] 1	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[37] 1	0	0x000003c0 - 0x000003df (0x20) IS[B]

rc nai · 11-07-2008, 04:13 PM

Xorg log file continued:

Code:

(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xE0000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section My Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 22082
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 32576 kB
(II) intel(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): EDID vendor "SEC", prod id 22082
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output LVDS using initial mode 1280x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 32636 kB stolen memory.
(==) intel(0): video overlay key set to 0x83e
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 2.2.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 1	0	0xe0000000 - 0xe007ffff (0x80000) MS[B]
	[1] 1	0	0xe8000000 - 0xefffffff (0x8000000) MS[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xe0208000 - 0xe0209fff (0x2000) MX[B]
	[7] -1	0	0xe0206000 - 0xe0207fff (0x2000) MX[B]
	[8] -1	0	0xe0204000 - 0xe0205fff (0x2000) MX[B]
	[9] -1	0	0xe0200000 - 0xe0203fff (0x4000) MX[B]
	[10] -1	0	0xe020a000 - 0xe020a7ff (0x800) MX[B]
	[11] -1	0	0xe0100800 - 0xe01008ff (0x100) MX[B]
	[12] -1	0	0xe0100c00 - 0xe0100dff (0x200) MX[B]
	[13] -1	0	0x40000000 - 0x400003ff (0x400) MX[B]
	[14] -1	0	0xe0100000 - 0xe01003ff (0x400) MX[B]
	[15] -1	0	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[16] -1	0	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[17] -1	0	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[18] -1	0	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[19] 1	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[20] 1	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[21] 1	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[22] 1	0	0x00001800 - 0x00001807 (0x8) IS[B]
	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[24] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[25] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[26] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[27] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[28] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[29] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[30] -1	0	0x00001810 - 0x0000181f (0x10) IX[B]
	[31] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[32] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[33] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[34] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[35] -1	0	0x00001860 - 0x0000187f (0x20) IX[B]
	[36] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[37] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[38] -1	0	0x00001800 - 0x00001807 (0x8) IX[B](B)
	[39] 1	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[40] 1	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 168192 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 672764 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(==) intel(0): VideoRam: 131072 KB
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
	(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
	(Cannot allocate memory)
(II) intel(0): Success.
(II) intel(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
(II) intel(0): [drm] Registers = 0xe0000000
(II) intel(0): [drm] ring buffer = 0xe8000000
(II) intel(0): [drm] mapped front buffer at 0xe8800000, handle = 0xe8800000
(II) intel(0): [drm] mapped back buffer at 0xea000000, handle = 0xea000000
(II) intel(0): [drm] mapped depth buffer at 0xea800000, handle = 0xea800000
(II) intel(0): [drm] mapped classic textures at 0xeb000000, handle = 0xeb000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xe8000000,0x8000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 15728640 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fdf000 (pgoffset 8159)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01fe0000 (pgoffset 8160)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01fe4000 (pgoffset 8164)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01fe5000 (pgoffset 8165)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x01fe9000 (pgoffset 8169)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x02800000 (pgoffset 10240)
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x03000000 (pgoffset 12288)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB)
(II) intel(0): 0x00800000-0x00ffffff: front buffer (5120 kB) X tiled
(II) intel(0): 0x01000000-0x01efffff: exa offscreen (15360 kB)
(II) intel(0): 0x01fdf000:            end of stolen memory
(II) intel(0): 0x01fdf000-0x01fdffff: Core cursor (4 kB, 0x0000000021451000 physical
)
(II) intel(0): 0x01fe0000-0x01fe3fff: ARGB cursor (16 kB, 0x0000000022bf8000 physical
)
(II) intel(0): 0x01fe4000-0x01fe4fff: Core cursor (4 kB, 0x0000000022bbb000 physical
)
(II) intel(0): 0x01fe5000-0x01fe8fff: ARGB cursor (16 kB, 0x000000002158c000 physical
)
(II) intel(0): 0x01fe9000-0x01fe9fff: overlay registers (4 kB, 0x0000000021420000 physical
)
(II) intel(0): 0x02000000-0x027fffff: back buffer (5120 kB) X tiled
(II) intel(0): 0x02800000-0x02ffffff: depth buffer (5120 kB) X tiled
(II) intel(0): 0x03000000-0x04ffffff: classic textures (32768 kB)
(II) intel(0): 0x08000000:            end of aperture
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0): [drm] dma control initialized, using IRQ 20
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 305 x 183
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 9
(**) Mouse1: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) evaluating device (Keyboard1)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) evaluating device (Mouse1)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) intel(0): fbc disabled on plane a
(II) intel(0): fbc disabled on plane a
(II) intel(0): fbc disabled on plane a
(II) intel(0): fbc disabled on plane a
(II) intel(0): EDID vendor "SEC", prod id 22082
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x768"x0.0   68.93  1280 1296 1344 1408  768 771 777 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 22082
(II) 3rd Button detected: disabling emulate3Button

rc nai · 11-07-2008, 04:13 PM

Here is my Xorg config file:

Code:

# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# NOTE:  This is a NEW IMPROVED version of XF86Config-fbdev that uses the vesa
# driver instead of the fbdev driver.  Thanks to Kenneth Fanyo who pointed
# this out to me. :)

# This XF86Config file is designed for use with the VESA framebuffer.
# This generic interface should work with nearly all video cards
# (although not every card will support every resolution).

# With the new driver, it should no longer be required to have frame buffer
# support in the kernel, or to run it on the console.
#
# Enjoy! :)
# -- volkerdi@slackware.com
#

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load        "type1"
    Load        "freetype"
    #Load        "speedo"

# This loads the GLX module
    Load       "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/OTF/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/cyrillic/"

# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.

#    ModulePath "/usr/lib/xorg/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option     "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option     "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option     "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option     "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option     "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option     "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option     "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option     "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

#    Option      "blank time"    "10"    # 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

#    Option      "standby time"  "20"
#    Option      "suspend time"  "30"
#    Option      "off time"      "60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

#    Option     "AutoRepeat"    "500 5"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option     "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option     "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option     "XkbModel"      "pc102"
#    Option     "XkbModel"      "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option     "XkbModel"      "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option     "XkbModel"      "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option     "XkbLayout"     "de"
#
# or:
#
#    Option     "XkbLayout"     "de"
#    Option     "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option     "XkbOptions"    "ctrl:swapcaps"


# These are the default XKB settings for X.Org
#
#    Option     "XkbRules"      "xorg"
#    Option     "XkbModel"      "pc105"
#    Option     "XkbLayout"     "us"
#    Option     "XkbVariant"    ""
#    Option     "XkbOptions"    ""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver	"mouse"

# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:

#    Option     "Protocol"      "Auto"

# The available mouse protocols types that you can set below are:
#    Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
#    Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
#    MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
#    ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol"    "IMPS/2"

# The mouse device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    Option "Device"      "/dev/mouse"
#   Option "Device"      "/dev/psaux"
#   Option "Device"      "/dev/ttyS0"
#   Option "Device"      "/dev/ttyS1"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"		"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

# Some examples of extended input devices

# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "My Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 50.0

#    HorizSync	30-64         # multisync
#    HorizSync	31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync	15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 60

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VESA Framebuffer"
    Driver      "i810"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "VESA Framebuffer"
    Monitor     "My Monitor"

# If your card can handle it, a higher default color depth (like 24 or 32)
# is highly recommended.

#   DefaultDepth 8
   DefaultDepth 16
#   DefaultDepth 24
#   DefaultDepth 32

# "1024x768" is also a conservative usable default resolution.  If you
# have a better monitor, feel free to try resolutions such as
# "1152x864", "1280x1024", "1600x1200", and "1800x1400" (or whatever your
# card/monitor can produce)

    Subsection "Display"
        Depth       8
        Modes "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes "1280x1024" "1280x768" "1024x768" "800x600" "640x480"
    EndSubsection

EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

rc nai · 11-29-2008, 04:09 PM

Ok I think I found the fix for this. I updated to gdm 2.20.7 with slackbuilds but the problem still persisted. So I edited gdm's config file(custom.conf) and I added this under [daemon]

Code:

AlwaysRestartServer=true

Then I restarted gdm with gdm-restart. So far it's been a few days and my laptop's uptime is usually above 8+hours. The blank black screen doesn't appear upon logout or standby mode anymore. I just hope it can stay that way. Also note that this is specifically under:

Code:

Slackware 12.1
2.6.24.5-smp
xfce 4.4.2
Intel Corporation 82852/855GM Integrated Graphics Device
915resolution
i810 driver
gdm 2.20.7