LILO Boot opions for disabling OHCI1394_0

LoungeLizard · 05-08-2004, 05:32 PM

Just installed Slack 9.1 on a new box I am dual booting it with win 2kpro at the Lilo boot loader where it give you the option of Windows or Linuix and the ability to pass options to the kernel what option do I need to pass to disable OHCI1394_0.

Cause if I just boot into Slack it gets to

ohci1394_0: OHCI-1394 1.1 (PCI) IRQ=[10] MMIO=[d0000000-d00007ff] Max Packet=[2048]

and locks up cant get anywhere cause the kernel never fully loads. Any Ideas

Thanks in advance!!!

ringwraith · 05-08-2004, 09:24 PM

It looks like it is trying to load that particular kernel module. You probably need to list ieee1394 in /etc/hotplug/blacklist, or just disable hotplug and configure /etc/rc.d/rc.modules by hand.

LoungeLizard · 05-09-2004, 06:48 PM

That the problem I cant get it to boot at all so I can list any modules or edit any files it freezes durning the boot process. I will try to reinstall and disable hotplug in the install process

ringwraith · 05-10-2004, 07:03 AM

IF you haven't already done the above, perhaps you could boot from your install CD and try to make the edits.

LoungeLizard · 05-10-2004, 02:39 PM

Yeah, after I posted the last one I thought I was jumping the gun

so thats how was planning on doing it, going to tackel it tonight after work

LoungeLizard · 05-11-2004, 02:26 AM

Thanks for all your help I was finally able to boot...I booted to SLAX Live Cd and disabled hotplug and everything is working just great now thanks alot for the help