LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 10-04-2006, 08:17 PM   #1
Jeebizz
Senior Member
 
Registered: May 2004
Distribution: Slackware 14.1 64-bit with multilib
Posts: 2,074

Rep: Reputation: 193Reputation: 193
huge26.s: PC and notebook


Ok, for the longest time I have wanted to run Slackware on JFS, so someone suggested in the other thread to use huge26.s. Once I got Slackware11.0, I booted into huge2.6, formatted EVERYTHING on my pc, even windows (because I am dual booting or planning to dual boot xp and slackware on my notebook, so the pc is dedicated to Slackware now). So, after the formatting, installing, I rebooted, only to be greeted with an unable to mount VFS error. Great, so I decided to reboot and just reinstall with huge26.s with ext3. Formatted, rebooted, booted fine, only to find out the login prompted showed 2.4.33. Why? What did I do wrong, or not do?

Now for my notebook. I don't know how I will be able to use huge26.s now, until I can get past what I posted above. Using 2.4 on my notebook is not an option, because most of my hardware was not found under 2.4 when I had installed Slack on my notebook. This is the brief specs of my notebook...

HP Pavilion dv6000
15" widescreen
AMD Dual Core Turion 64 TL-56 , 1.81GHz
sata 115GB HD, already partitioned for Slackware
2GB of RAM
NVidia GeForce Go 7200
Conexant HD Audio
HD_Audio soft data fax modem
Broadcom wireless 802.11b/g
NVidia nForce Networking controller
3USB2.0 ports and a firewire port

This is what lspci gave me though.
Code:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0
	Capabilities: [44] #08 [01e0]
	Capabilities: [e0] #08 [a800]

00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: 66Mhz, fast devsel

00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: 66Mhz, fast devsel

00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: 66Mhz, fast devsel

00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0

00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0
	Capabilities: [44] #00 [00fe]
	Capabilities: [fc] #00 [0000]

00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: 66Mhz, fast devsel

00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
	Flags: 66Mhz, fast devsel

00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: c0200000-c03fffff
	Prefetchable memory behind bridge: 00000000c3200000-00000000c3300000
	Capabilities: [40] #0d [0000]
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
	Capabilities: [60] #08 [a800]
	Capabilities: [80] #10 [0141]

00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: c0400000-c05fffff
	Capabilities: [40] #0d [0000]
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
	Capabilities: [60] #08 [a800]
	Capabilities: [80] #10 [0141]

00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Memory behind bridge: c1000000-c2ffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000
	Capabilities: [40] #0d [0000]
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
	Capabilities: [60] #08 [a800]
	Capabilities: [80] #10 [0141]

00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0
	Capabilities: [44] #08 [01e9]
	Capabilities: [e0] #08 [a801]

00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0
	I/O ports at 1d00 [size=128]

00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: 66Mhz, fast devsel, IRQ 10
	I/O ports at 3040 [size=64]
	I/O ports at 3000 [size=64]
	Capabilities: [44] Power Management version 2

00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
	Memory at c0040000 (32-bit, non-prefetchable) [size=256K]

00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
	Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2

00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 7
	Memory at c0005000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] #0a [2098]
	Capabilities: [80] Power Management version 2

00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0
	I/O ports at 3080 [size=16]
	Capabilities: [44] Power Management version 2

00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev f1) (prog-if 85 [Master SecO PriO])
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5
	I/O ports at 30c0 [size=8]
	I/O ports at 30b4 [size=4]
	I/O ports at 30b8 [size=8]
	I/O ports at 30b0 [size=4]
	I/O ports at 3090 [size=16]
	Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
	Capabilities: [b0] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable-
	Capabilities: [cc] #08 [a802]

00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
	Flags: bus master, 66Mhz, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
	Memory behind bridge: c3000000-c30fffff
	Capabilities: [b8] #0d [0000]
	Capabilities: [8c] #08 [a800]

00:10.1 Class 0403: nVidia Corporation MCP51 High Definition Audio (rev a2)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 10
	Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
	Capabilities: [6c] #08 [a802]

00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11
	Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at 30e0 [size=8]
	Capabilities: [44] Power Management version 2

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Flags: fast devsel
	Capabilities: [80] #08 [2101]

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Flags: fast devsel
	Capabilities: [f0] #0f [0010]

03:00.0 Network controller: Broadcom Corporation: Unknown device 4311 (rev 01)
	Subsystem: Hewlett-Packard Company: Unknown device 1363
	Flags: bus master, fast devsel, latency 0, IRQ 255
	Memory at c0400000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [40] Power Management version 2
	Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
	Capabilities: [d0] #10 [0011]

05:00.0 VGA compatible controller: nVidia Corporation: Unknown device 01d6 (rev a1) (prog-if 00 [VGA])
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at c2000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at c1000000 (64-bit, non-prefetchable) [size=16M]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
	Capabilities: [78] #10 [0001]

07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832 (prog-if 10 [OHCI])
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, medium devsel, latency 64, IRQ 11
	Memory at c3000000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [dc] Power Management version 2

07:05.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, medium devsel, latency 64, IRQ 10
	Memory at c3000800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2

07:05.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: bus master, medium devsel, latency 0, IRQ 10
	Memory at c3000c00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2

07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: medium devsel, IRQ 10
	Memory at c3001000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2

07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
	Subsystem: Hewlett-Packard Company: Unknown device 30b7
	Flags: medium devsel, IRQ 10
	Memory at c3001400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
I tried looking for the NVidia drivers, but I could not get anything for the video and network. I don't even know about the conexant audio.

So, if someone can give me better details on how to setup hug26.s first on my pc with jfs and actually running 2.6, then I can at least try to get Slackware on my notebook on my own to see if I have any different luck in getting network/audio and video to work correctly, then I will just need help with minor tweaking.
 
Old 10-05-2006, 01:32 PM   #2
nykey
Member
 
Registered: Nov 2003
Location: Tg-Jiu, Romania
Distribution: OpenSUSE 11.1 / echo "Windows XP" > Trash
Posts: 360

Rep: Reputation: 30
Insert your Slackware CD #1 and at the boot prompt enter: huge26.s , hit enter and it will take you to the command line, go on with the setup and at some time it will ask you what kernel to use and you'll have some options, you probably choosed the one with Skip and that is wrong because in the install process the kernel-ide-2.4.33.3*.tgz from the a/ directory gets installed and it will remain as your default kernel unless you choose another kernel. I'm not exactly sure how the question is asked but choose the option "Choose from CDROM" or something similar and after that you'll get a list with all the kernels on the CD. There you look again for huge26.s, select it and press enter and it will overwrite the 2.4.33.3 from the a/ directory. And thats it.
 
Old 10-05-2006, 01:34 PM   #3
nykey
Member
 
Registered: Nov 2003
Location: Tg-Jiu, Romania
Distribution: OpenSUSE 11.1 / echo "Windows XP" > Trash
Posts: 360

Rep: Reputation: 30
Oh, I'm not sure if JFS is compiled as a module or built into the kernel. If it is a module you'll have to make an initrd image in order for your computer to boot. And don't forget to install the "kernel-modules-*.tgz" package from the "extra" directory on CD #2 or the DVD.
 
Old 10-05-2006, 03:03 PM   #4
Jeebizz
Senior Member
 
Registered: May 2004
Distribution: Slackware 14.1 64-bit with multilib
Posts: 2,074

Original Poster
Rep: Reputation: 193Reputation: 193
Ok I will try that. But as far as I know if JFS shows up in the formatting phase of setup, then it should be compiled into the kernel and not as a module, but then again I'm not sure, maybe I will have to check the .config file for huge26.s to see. I hope it is however, because I just don't want to go through the trouble of having to create an initrd as well (translation: Just too lazy right now, )
 
Old 10-05-2006, 03:36 PM   #5
nykey
Member
 
Registered: Nov 2003
Location: Tg-Jiu, Romania
Distribution: OpenSUSE 11.1 / echo "Windows XP" > Trash
Posts: 360

Rep: Reputation: 30
Actually, yes... you're right if it does appear it means that it has copiled in support and it only shows up on huge26.s or test26.s so I think you can install without worries.
 
Old 10-05-2006, 04:00 PM   #6
Jeebizz
Senior Member
 
Registered: May 2004
Distribution: Slackware 14.1 64-bit with multilib
Posts: 2,074

Original Poster
Rep: Reputation: 193Reputation: 193
Ok well, I went through the setup again, and during the setup I chose the huge26.s when it asked me what kernel to install, and rebooted, and it booted jfs just fine. So then I went to /extra and went to the linux-smp2.6.x.x directory (because I am running a dual core), and installed the packages, rebooted, and now, it locks up in the middle of loading the linux kernel. Hrmm...

[edit]

This was done on my notebook by the way. My pc is NOT a dual core , it is just a humble AMD K6-2

Last edited by Jeebizz; 10-05-2006 at 04:07 PM.
 
Old 10-05-2006, 04:13 PM   #7
nykey
Member
 
Registered: Nov 2003
Location: Tg-Jiu, Romania
Distribution: OpenSUSE 11.1 / echo "Windows XP" > Trash
Posts: 360

Rep: Reputation: 30
The huge26.s looks like it doesn't have SMP enabled
Code:
root@nykey:/mnt/tmp/kernels/huge26.s# cat config | grep SMP
CONFIG_BROKEN_ON_SMP=y
# CONFIG_SMP is not set
# CONFIG_X86_BIGSMP is not set
root@nykey:/mnt/tmp/kernels/huge26.s#
In order to get SMP I think you have to install the "kernel-generic*.tgz" package too and therefor you must make an initrd. That or install it again and install the modules from the linux-2.6.17.13 (not -smp) and then just do a 'make menuconfig' add SMP support then 'make' and 'make modules_install' and replace the files in /boot with the newly created. I presume you know which files to replace and from where.

EDIT: Then install it that way on your Desktop PC and it will work... on your laptop will be a little more to deal with but I'm sure you'll get it working.

Last edited by nykey; 10-05-2006 at 04:24 PM.
 
Old 10-05-2006, 04:25 PM   #8
Jeebizz
Senior Member
 
Registered: May 2004
Distribution: Slackware 14.1 64-bit with multilib
Posts: 2,074

Original Poster
Rep: Reputation: 193Reputation: 193
Quote:
I presume you know which files to replace and from where.
Not quite. I never had any luck when it came to kernel compiling and installation, but I will give it a try anyways to see how it goes.
 
Old 10-05-2006, 04:27 PM   #9
nykey
Member
 
Registered: Nov 2003
Location: Tg-Jiu, Romania
Distribution: OpenSUSE 11.1 / echo "Windows XP" > Trash
Posts: 360

Rep: Reputation: 30
Ok, then I'll post you how to do it if you'd like. I'll be editing this post after I submited and you can wait and check it out before starting.

[EDIT]

First of all, after you install the system, then go to the /extra/linux-2.6.17.13 (not linux-smp-2.6.17.13) directory and install 'kernel-modules' and 'kernel-source' (required) reboot your PC to have a good running system. After it boots up again go to '/usr/src/linux' and do 'make menuconfig' and then you will be presented with a curses based menu. From there go to 'Processor type and features --->' and select 'Symmetric multi-processing support' (it can only be built in and no option to add it as a module so it should have a '*' on it's left after you select it) then 5 options below you'll see 'Maximum number of CPU's (2-255)' hit enter over that option and enter how many CPU's you have (default is 8) to save a few kilobytes on the kernel image (this is optional - you can leave it as is). Then select 'Exit' untill you will be presented with a question 'Do you wish to save your new kernel configuration?' and ofcourse choose 'Yes'. Now run the command 'make && make modules_install' and it will start to recompile your kernel. When it finishes type in this command to rename your current kernel 'mv /boot/vmlinuz /boot/vmlinuz.old && mv /boot/System.map /boot/System.map.old && mv /boot/config /boot/config.old' and now to copy the new created kernel with this command 'cp System.map /boot && cp .config /boot/config && cp arch/i386/boot/bzImage /boot/vmlinuz' (you must run this command while in '/usr/src/linux' ... do not change directories). Run 'lilo -v' and reboot. You could add the old kernel which we renamed from 'vmlinuz' to 'vmlinuz.old' to the '/etc/lilo.conf' file too in case the newly created one doesn't boot either so you'll still have a bootable system.

Last edited by nykey; 10-05-2006 at 04:44 PM.
 
Old 10-05-2006, 04:29 PM   #10
Jeebizz
Senior Member
 
Registered: May 2004
Distribution: Slackware 14.1 64-bit with multilib
Posts: 2,074

Original Poster
Rep: Reputation: 193Reputation: 193
Ok, thanx
 
Old 10-05-2006, 04:42 PM   #11
snowtigger
Member
 
Registered: Mar 2005
Location: england
Distribution: slackware, win2k
Posts: 364

Rep: Reputation: 34
The smp kernel does work. Are you sure you have the most upto date packages?
There was a small mistake with the config, but as you can see below is an extract from the change log.

Sat Sep 30 19:35:24 CDT 2006
extra/linux-smp-2.6.17.13/kernel-generic-smp-2.6.17.13-i686-3.tgz:
Recompiled to add missing SMP/SMT support.
Thanks to arny for noticing that I'd started with the wrong .config.

The smp kernel does work. I have had it running on my dual AMD 1800 duron box.

 
Old 10-05-2006, 04:48 PM   #12
nykey
Member
 
Registered: Nov 2003
Location: Tg-Jiu, Romania
Distribution: OpenSUSE 11.1 / echo "Windows XP" > Trash
Posts: 360

Rep: Reputation: 30
Yes it does work and I've said so myself, but in order for it to work he would have to install the 'kernel-generic-smp-2.6.17.13-i686-3.tgz' which in the end would force him to use an initrd image and that's what were trying to avoid. The 'huge26.s' kernel does NOT have SMP compiled for rightfully reasons I might add. Most people do not understand the difference between the 'huge26.s' kernel image and the 'kernel-generic*' package because, most people, don't read the documentation or at least try to... no offence but it is clearly stated in there.

Last edited by nykey; 10-05-2006 at 04:49 PM.
 
Old 10-05-2006, 04:49 PM   #13
Jeebizz
Senior Member
 
Registered: May 2004
Distribution: Slackware 14.1 64-bit with multilib
Posts: 2,074

Original Poster
Rep: Reputation: 193Reputation: 193
I would assume so, since I am using the smp kernel from the install disc.
 
Old 10-05-2006, 04:59 PM   #14
snowtigger
Member
 
Registered: Mar 2005
Location: england
Distribution: slackware, win2k
Posts: 364

Rep: Reputation: 34
Sorry I had a brain melt down. I keep forgetting that all but ext2 filesystems are modules in the 2.6 kernels from the extra directory.

I hope that Pat will change his mind on this and in future version compile ext2, ext3, reiserfs, jfs and xfs into the generic kernels.

 
Old 10-09-2006, 02:28 AM   #15
arubin
Senior Member
 
Registered: Mar 2004
Location: Middx UK
Distribution: Slackware64 14.1 (multilib)
Posts: 1,209

Rep: Reputation: 55
I am having trouble getting my brain around this.

Which of the 2.6 kernels (if any) is smp enabled? Huge26.s doesn't seem to be (unless I am reading the congif file wrong).

If you use ext3 need an initrd file to be able to boot the system but you cannot boot the system without an initrd file so how do you boot it to compile the initrd file in the first place?
 
  


Reply

Tags
hp, lt


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
notebook display not maximised acer notebook assettt Linux - Newbie 5 09-09-2006 05:20 PM
Any Linux laptop/notebook gamers out there willing to recommend laptop/notebook? RHLinuxGUY Linux - Laptop and Netbook 2 07-11-2006 07:50 PM
PC notebook or Mac Notebook? thebover Linux - General 8 10-08-2004 03:02 AM
New Notebook? thom Linux - Hardware 2 10-07-2003 04:29 PM
Notebook Fried Linux - General 1 12-18-2001 04:34 PM


All times are GMT -5. The time now is 03:16 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration