[SOLVED] how do I diagnose keyboard problems when experiencing
SlackwareThis Forum is for the discussion of Slackware Linux.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
how do I diagnose keyboard problems when experiencing
Runnign slackware kernel 4.7.0 on a baytrail device laptop (hardware not ideal!)
but sometimes it works just right. Which is the problem. THe other times I'm learning things to try to get this machine to work always . The main problem is the keyboard. right now it types goood
aaaaaaaaaaaaaabbbbbbbbbbbbbbbccccccccc
but there are a lot of times when shutting it off them powering back up
it will not cooperate very well. in X or not...
Working in X is not a concern.
Just terminal I would like the cursor to blink like it should .
But when its acting up it will blink slow and type slow
and will not repeat keys...
Any help appreciated
Also with livebootdisks they works always ... And I don't think its the amount of modules I'm running because it does work some of the time
[ 38.732965] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 39.044968] loop: module loaded
[ 40.120501] udevd[621]: starting eudev-3.1.5
[ 40.251081] 80860F0A:00: ttyS1 at MMIO 0x90919000 (irq = 191, base_baud = 2764800) is a 16550A
[ 40.268866] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 40.251081] 80860F0A:00: ttyS1 at MMIO 0x90919000 (irq = 191, base_baud = 2764800) is a 16550A
[ 40.268866] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 40.272965] 80860F0A:01: ttyS2 at MMIO 0x9091b000 (irq = 192, base_baud = 2764800) is a 16550A
[ 40.273033] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 40.274156] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 40.274164] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 40.274330] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 40.274334] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.274336] usb usb1: Product: xHCI Host Controller
[ 40.274339] usb usb1: Manufacturer: Linux 4.7.04.4.7-smp xhci-hcd
[ 40.274342] usb usb1: SerialNumber: 0000:00:14.0
[ 40.274646] hub 1-0:1.0: USB hub found
[ 40.274667] hub 1-0:1.0: 6 ports detected
[ 40.276388] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 40.276475] ACPI: AC Adapter [ADP1] (off-line)
[ 40.326067] Linux agpgart interface v0.103
[ 40.344994] ------------[ cut here ]------------
[ 40.348959] [drm] Initialized drm 1.1.0 20060810
[ 40.353096] WARNING: CPU: 3 PID: 137 at drivers/pinctrl/intel/pinctrl-baytrail.c:1029 byt_gpio_set_direction+0x9a/0xb0
[ 40.353531] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 40.361621] Potential Error: Setting GPIO with direct_irq_en to output
[ 40.361757] Modules linked in:
[ 40.365894] button(+) drm_kms_helper fjes video dw_dmac(+) dw_dmac_core drm tpm_crb(+) soc_button_array intel_gtt int3402_thermal processor_thermal_device int3403_the
rmal int3400_thermal intel_soc_dts_iosf int340x_thermal_zone acpi_thermal_rel agpgart i2c_algo_bit ac fb_sys_fops mei_txe(+) syscopyarea acpi_pad sysfillrect
[ 40.372522] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 40.378202] i2c /dev entries driver
[ 40.383273] [Firmware Bug]: No valid trip found
[ 40.389260] xhci_pci(+)
[ 40.393992] i2c_hid sysimgblt mei xhci_hcd battery lpc_ich tpm_tis tpm 8250_dw loop i2c_designware_pci i2c_designware_platform i2c_designware_core i2c_core
[ 40.395270] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 40.404394] usbhid
[ 40.409501] hid wbsd sdhci_pltfm sdhci_acpi sdhci mmc_block mmc_core
[ 40.414756] CPU: 3 PID: 137 Comm: kworker/3:1 Not tainted 4.7.04.4.7-smp #1
[ 40.420094] Hardware name: LENOVO 80R2/Aristotle 11.6, BIOS E2CN13WW 12/22/2015
[ 40.425495] Workqueue: pm pm_runtime_work
[ 40.429756] EFI Variables Facility v0.08 2004-May-17
[ 40.436162] 00000086 00000086 f4723b04 c15ee346 f4723b48 c1f3756c f4723b34 c1058b2a
[ 40.441530] c1f37530 f4723b64 00000089 c1f3756c 00000405 c162412a 00000405 f57393d4
[ 40.446877] f826c1f8 f826c1f0 f4723b50 c1058b8b 00000009 00000000 f4723b48 c1f37530
[ 40.452294] Call Trace:
[ 40.457624] [<c15ee346>] dump_stack+0x47/0x61
[ 40.463007] [<c1058b2a>] __warn+0xea/0x110
[ 40.468373] [<c162412a>] ? byt_gpio_set_direction+0x9a/0xb0
[ 40.473744] [<c1058b8b>] warn_slowpath_fmt+0x3b/0x40
[ 40.479082] [<c162412a>] byt_gpio_set_direction+0x9a/0xb0
[ 40.484363] [<c1624090>] ? byt_get_groups_count+0x20/0x20
[ 40.479082] [<c162412a>] byt_gpio_set_direction+0x9a/0xb0
[ 40.484363] [<c1624090>] ? byt_get_groups_count+0x20/0x20
[ 40.489565] [<c162106c>] pinmux_gpio_direction+0x2c/0x50
[ 40.494698] [<c161e50b>] pinctrl_gpio_direction+0x5b/0x80
[ 40.499765] [<c161e55f>] pinctrl_gpio_direction_output+0xf/0x20
[ 40.504783] [<c16248ef>] byt_gpio_direction_output+0x1f/0x40
[ 40.509740] [<c16248d0>] ? byt_gpio_dbg_show+0x390/0x390
[ 40.514685] [<c162769f>] _gpiod_direction_output_raw+0x7f/0x190
[ 40.519624] [<c1626fcb>] ? __gpiod_request+0x9b/0xd0
[ 40.524552] [<c162895b>] gpiod_direction_output+0x3b/0xc0
[ 40.529486] [<c162c0ca>] acpi_gpio_adr_space_handler+0x1fa/0x2c0
[ 40.534449] [<c162bed0>] ? acpi_gpiochip_request_interrupt+0x290/0x290
[ 40.539476] [<c168202c>] acpi_ev_address_space_dispatch+0x1b3/0x1fd
[ 40.544432] [<c162bed0>] ? acpi_gpiochip_request_interrupt+0x290/0x290
[ 40.549336] [<c168554b>] acpi_ex_access_region+0x18f/0x1ff
[ 40.554248] [<c1685358>] acpi_ex_write_data_to_field+0x183/0x1e7
[ 40.559167] [<c1688df3>] acpi_ex_store_object_to_node+0x129/0x140
[ 40.564081] [<c1688ea7>] acpi_ex_store+0x9d/0x1e6
[ 40.568847] [<c1686d1b>] acpi_ex_opcode_1A_1T_1R+0x47b/0x57f
[ 40.573514] [<c1688a1a>] ? acpi_ex_resolve_operands+0x19d/0x417
[ 40.578108] [<c167f42b>] acpi_ds_exec_end_op+0xba/0x375
[ 40.582522] [<c168fc08>] acpi_ps_parse_loop+0x473/0x4be
[ 40.586710] [<c169056a>] acpi_ps_parse_aml+0x8a/0x231
[ 40.590668] [<c1690cb2>] acpi_ps_execute_method+0x126/0x15a
[ 40.594573] [<c168be5b>] acpi_ns_evaluate+0x192/0x20c
[ 40.598457] [<c168e4b8>] acpi_evaluate_object+0x10a/0x1e7
[ 40.602338] [<c1670e04>] acpi_dev_pm_explicit_set+0x3d/0x4e
[ 40.606025] [<c1670f36>] acpi_device_set_power+0x121/0x19a
[ 40.609503] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.612952] [<c1671153>] acpi_dev_pm_low_power.part.6+0x29/0x2e
[ 40.616362] [<c167135f>] acpi_dev_runtime_suspend+0x62/0x7b
[ 40.619709] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.623014] [<c1671393>] acpi_subsys_runtime_suspend+0x1b/0x1e
[ 40.626286] [<c170a49f>] __rpm_callback+0x1f/0x60
[ 40.629541] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.632771] [<c170a4ff>] rpm_callback+0x1f/0x70
[ 40.635941] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.639111] [<c170ac23>] rpm_suspend+0x103/0x5d0
[ 40.642212] [<c10961af>] ? __wake_up+0x3f/0x50
[ 40.645299] [<c170b36a>] rpm_idle+0x19a/0x290
[ 40.648382] [<c170bd67>] pm_runtime_work+0x87/0x90
[ 40.651455] [<c106eaf6>] process_one_work+0x106/0x3f0
[ 40.654524] [<c106f9f7>] worker_thread+0x37/0x4a0
[ 40.657576] [<c106f9c0>] ? create_worker+0x1a0/0x1a0
[ 40.660629] [<c10745cb>] kthread+0x9b/0xb0
[ 40.663660] [<c1c31822>] ret_from_kernel_thread+0xe/0x24
[ 40.660629] [<c10745cb>] kthread+0x9b/0xb0
[ 40.663660] [<c1c31822>] ret_from_kernel_thread+0xe/0x24
[ 40.666716] [<c1074530>] ? kthread_worker_fn+0x130/0x130
[ 40.669801] ---[ end trace d4ca738cace3e551 ]---
[ 40.721735] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 40.725908] ACPI: Lid Switch [LID0]
[ 40.783290] intel_rapl: Found RAPL domain package
[ 40.786518] intel_rapl: Found RAPL domain core
[ 40.836179] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 40.839763] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 40.843126] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 40.846367] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.849592] usb usb2: Product: xHCI Host Controller
[ 40.852776] usb usb2: Manufacturer: Linux 4.7.04.4.7-smp xhci-hcd
[ 40.856007] usb usb2: SerialNumber: 0000:00:14.0
[ 40.859904] hub 2-0:1.0: USB hub found
[ 40.863163] hub 2-0:1.0: 1 port detected
[ 40.866820] genirq: Flags mismatch irq 8. 00000083 (volume_down) vs. 00000080 (rtc0)
[ 40.870143] gpio-keys gpio-keys.1.auto: Unable to claim irq 8; error -16
[ 40.874547] gpio-keys: probe of gpio-keys.1.auto failed with error -16
[ 40.878101] [drm] Memory usable by graphics device = 2048M
[ 40.878240] input: gpio-keys as /devices/platform/gpio-keys.2.auto/input/input3
[ 40.879516] input: ENEE3730:00 6243:0001 as /devices/platform/80860F41:02/i2c-2/i2c-ENEE3730:00/0018:6243:0001.0001/input/input4
[ 40.881243] hid-generic 0018:6243:0001.0001: input,hidraw0: I2C HID v1.00 Keyboard [ENEE3730:00 6243:0001] on i2c-ENEE3730:00
[ 40.892649] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 40.892654] fb: switching to inteldrmfb from EFI VGA
[ 40.896553] Console: switching to colour dummy device 80x25
[ 40.896992] [drm] Replacing VGA console driver
[ 40.897331] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 40.897345] [drm] Driver supports precise vblank timestamp query.
[ 40.941121] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 40.984439] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 40.986259] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 40.987069] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 41.071783] fbcon: inteldrmfb (fb0) is primary device
[ 41.203604] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 41.371158] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 41.371169] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 41.371178] usb 1-1: Product: USB 2.0 Hub
[ 41.372432] hub 1-1:1.0: USB hub found
[ 41.372611] hub 1-1:1.0: 4 ports detected
[ 41.373182] usb: port power management may be unreliable
[ 41.654436] usb 1-1.2: new high-speed USB device number 3 using xhci_hcd
[ 41.748358] usb 1-1.2: New USB device found, idVendor=7392, idProduct=7811
[ 41.748370] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 41.748379] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 41.748370] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 41.748379] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 41.748387] usb 1-1.2: Manufacturer: Realtek
[ 41.748395] usb 1-1.2: SerialNumber: 00e04c000001
[ 41.825312] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
[ 41.938994] usb 1-1.3: New USB device found, idVendor=5986, idProduct=0673
[ 41.939006] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 41.939015] usb 1-1.3: Product: Lenovo EasyCamera
[ 41.939023] usb 1-1.3: Manufacturer: Bison Corp.
[ 41.939031] usb 1-1.3: SerialNumber: 200901010001
[ 42.025112] Linux video capture interface: v2.00
[ 42.046389] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0673)
[ 42.053036] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[ 42.053354] usbcore: registered new interface driver uvcvideo
[ 42.053357] USB Video Class driver (1.1.1)
[ 42.150939] usb 1-1.2: Vendor: Realtek
[ 42.150945] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 42.150951] usb 1-1.2: rtl8192cu_parse_efuse: dumping efuse (0x80 bytes):
[ 42.150960] usb 1-1.2: 00: 29 81 00 74 cd 00 00 00
[ 42.150968] usb 1-1.2: 08: ff 00 92 73 11 78 03 41
[ 42.150976] usb 1-1.2: 10: 32 00 85 62 9e ad 74 da
[ 42.150984] usb 1-1.2: 18: 38 3b 48 62 0a 03 52 65
[ 42.150992] usb 1-1.2: 20: 61 6c 74 65 6b 00 16 03
[ 42.151000] usb 1-1.2: 28: 38 30 32 2e 31 31 6e 20
[ 42.151008] usb 1-1.2: 30: 57 4c 41 4e 20 41 64 61
[ 42.151016] usb 1-1.2: 38: 70 74 65 72 00 00 00 00
[ 42.151023] usb 1-1.2: 40: 00 00 00 00 00 00 00 00
[ 42.151031] usb 1-1.2: 48: 00 00 00 00 00 00 00 00
[ 42.151038] usb 1-1.2: 50: 00 00 00 00 00 00 00 00
[ 42.151046] usb 1-1.2: 58: 06 00 26 26 26 00 00 00
[ 42.151054] usb 1-1.2: 60: 28 28 27 00 00 00 00 00
[ 42.151062] usb 1-1.2: 68: 00 00 00 00 11 11 33 00
[ 42.151069] usb 1-1.2: 70: 00 00 00 00 00 00 00 00
[ 42.151077] usb 1-1.2: 78: 10 00 00 00 36 00 00 00
[ 42.151086] usb 1-1.2: RTL8188CU rev A (TSMC) 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[ 42.151092] usb 1-1.2: RTL8188CU MAC: 74:da:38:3b:48:62
[ 42.151098] usb 1-1.2: rtl8xxxu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 42.170138] usb 1-1.2: Firmware revision 80.0 (signature 0x88c1)
[ 42.568750] usbcore: registered new interface driver rtl8xxxu
[ 42.985937] Console: switching to colour frame buffer device 170x48
[ 43.121564] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 43.819650] Adding 1048572k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:1048572k SS
[ 43.869390] fuse init (API version 7.25)
[ 54.093252] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
[ 54.462399] random: nonblocking pool is initialized
[ 61.438438] NET: Registered protocol family 10
[ 54.462399] random: nonblocking pool is initialized
[ 61.438438] NET: Registered protocol family 10
[ 62.324169] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 63.453771] wlan0: authenticate with c0:ff:d4:9e:3c:16
[ 63.459396] wlan0: send auth to c0:ff:d4:9e:3c:16 (try 1/3)
[ 63.660152] wlan0: send auth to c0:ff:d4:9e:3c:16 (try 2/3)
[ 63.662399] wlan0: authenticated
[ 63.664058] wlan0: associate with c0:ff:d4:9e:3c:16 (try 1/3)
[ 63.671106] wlan0: RX AssocResp from c0:ff:d4:9e:3c:16 (capab=0x1411 status=0 aid=2)
[ 63.672271] usb 1-1.2: rtl8xxxu_bss_info_changed: HT supported
[ 63.673007] wlan0: associated
[ 63.673054] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 63.674160] usb 1-1.2: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_START
[ 124.042767] usb 1-1.2: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_START
[ 134.200990] usb 1-1.2: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_START
[ 134.252600] usb 1-1.2: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_START
dmesgdiff when the problem is present
Code:
i
[ 38.683394] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem
[ 38.694936] EXT4-fs (mmcblk0p3): write access will be enabled during recovery
[ 38.768940] EXT4-fs (mmcblk0p3): recovery complete
[ 38.781638] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 39.065223] loop: module loaded
[ 38.781638] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[ 39.065223] loop: module loaded
[ 40.177165] udevd[621]: starting eudev-3.1.5
[ 40.328941] [Firmware Bug]: No valid trip found
[ 40.339726] 80860F0A:00: ttyS1 at MMIO 0x90919000 (irq = 191, base_baud = 2764800) is a 16550A
[ 40.345637] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 40.350106] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 40.354915] 80860F0A:01: ttyS2 at MMIO 0x9091b000 (irq = 192, base_baud = 2764800) is a 16550A
[ 40.355410] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 40.355418] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 40.355677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 40.355681] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.355684] usb usb1: Product: xHCI Host Controller
[ 40.355687] usb usb1: Manufacturer: Linux 4.7.04.4.7-smp xhci-hcd
[ 40.355689] usb usb1: SerialNumber: 0000:00:14.0
[ 40.356459] hub 1-0:1.0: USB hub found
[ 40.356482] hub 1-0:1.0: 6 ports detected
[ 40.392545] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 40.397121] ACPI: AC Adapter [ADP1] (off-line)
[ 40.398456] Linux agpgart interface v0.103
[ 40.414362] [drm] Initialized drm 1.1.0 20060810
[ 40.435000] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 40.437806] ------------[ cut here ]------------
[ 40.437818] WARNING: CPU: 0 PID: 45 at drivers/pinctrl/intel/pinctrl-baytrail.c:1029 byt_gpio_set_direction+0x9a/0xb0
[ 40.437821] Potential Error: Setting GPIO with direct_irq_en to output
[ 40.437862] Modules linked in: fjes(+) video(+) button(+) soc_button_array(+) tpm_crb(+) drm_kms_helper dw_dmac(+) dw_dmac_core int3402_thermal processor_thermal_devic
e int3400_thermal int3403_thermal intel_soc_dts_iosf acpi_thermal_rel int340x_thermal_zone drm intel_gtt agpgart mei_txe(+) i2c_algo_bit acpi_pad fb_sys_fops syscopyarea
sysfillrect sysimgblt i2c_hid battery ac mei xhci_pci(+) lpc_ich xhci_hcd tpm_tis thermal tpm 8250_dw loop i2c_designware_pci i2c_designware_platform i2c_designware_core
i2c_core usbhid hid wbsd sdhci_pltfm sdhci_acpi sdhci mmc_block mmc_core
[ 40.437867] CPU: 0 PID: 45 Comm: kworker/0:1 Not tainted 4.7.04.4.7-smp #1
[ 40.437868] Hardware name: LENOVO 80R2/Aristotle 11.6, BIOS E2CN13WW 12/22/2015
[ 40.437875] Workqueue: pm pm_runtime_work
[ 40.437883] 00000086 00000086 f482fb04 c15ee346 f482fb48 c1f3756c f482fb34 c1058b2a
[ 40.437889] c1f37530 f482fb64 0000002d c1f3756c 00000405 c162412a 00000405 f5650bd4
[ 40.437895] f826c1f8 f826c1f0 f482fb50 c1058b8b 00000009 00000000 f482fb48 c1f37530
[ 40.437896] Call Trace:
[ 40.437903] [<c15ee346>] dump_stack+0x47/0x61
[ 40.437908] [<c1058b2a>] __warn+0xea/0x110
[ 40.437912] [<c162412a>] ? byt_gpio_set_direction+0x9a/0xb0
[ 40.437915] [<c1058b8b>] warn_slowpath_fmt+0x3b/0x40
[ 40.437919] [<c162412a>] byt_gpio_set_direction+0x9a/0xb0
[ 40.437923] [<c1624090>] ? byt_get_groups_count+0x20/0x20
[ 40.437927] [<c162106c>] pinmux_gpio_direction+0x2c/0x50
[ 40.437930] [<c161e50b>] pinctrl_gpio_direction+0x5b/0x80
[ 40.437933] [<c161e55f>] pinctrl_gpio_direction_output+0xf/0x20
[ 40.437937] [<c16248ef>] byt_gpio_direction_output+0x1f/0x40
[ 40.437933] [<c161e55f>] pinctrl_gpio_direction_output+0xf/0x20
[ 40.437937] [<c16248ef>] byt_gpio_direction_output+0x1f/0x40
[ 40.437940] [<c16248d0>] ? byt_gpio_dbg_show+0x390/0x390
[ 40.437944] [<c162769f>] _gpiod_direction_output_raw+0x7f/0x190
[ 40.437947] [<c1626fcb>] ? __gpiod_request+0x9b/0xd0
[ 40.437950] [<c162895b>] gpiod_direction_output+0x3b/0xc0
[ 40.437954] [<c162c0ca>] acpi_gpio_adr_space_handler+0x1fa/0x2c0
[ 40.437958] [<c162bed0>] ? acpi_gpiochip_request_interrupt+0x290/0x290
[ 40.437963] [<c168202c>] acpi_ev_address_space_dispatch+0x1b3/0x1fd
[ 40.437967] [<c162bed0>] ? acpi_gpiochip_request_interrupt+0x290/0x290
[ 40.437971] [<c168554b>] acpi_ex_access_region+0x18f/0x1ff
[ 40.437975] [<c1685358>] acpi_ex_write_data_to_field+0x183/0x1e7
[ 40.437979] [<c1688df3>] acpi_ex_store_object_to_node+0x129/0x140
[ 40.437982] [<c1688ea7>] acpi_ex_store+0x9d/0x1e6
[ 40.437986] [<c1686d1b>] acpi_ex_opcode_1A_1T_1R+0x47b/0x57f
[ 40.437989] [<c1688a1a>] ? acpi_ex_resolve_operands+0x19d/0x417
[ 40.437992] [<c167f42b>] acpi_ds_exec_end_op+0xba/0x375
[ 40.437997] [<c168fc08>] acpi_ps_parse_loop+0x473/0x4be
[ 40.438001] [<c169056a>] acpi_ps_parse_aml+0x8a/0x231
[ 40.438005] [<c1690cb2>] acpi_ps_execute_method+0x126/0x15a
[ 40.438008] [<c168be5b>] acpi_ns_evaluate+0x192/0x20c
[ 40.438012] [<c168e4b8>] acpi_evaluate_object+0x10a/0x1e7
[ 40.438017] [<c1670e04>] acpi_dev_pm_explicit_set+0x3d/0x4e
[ 40.438020] [<c1670f36>] acpi_device_set_power+0x121/0x19a
[ 40.438024] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.438028] [<c1671153>] acpi_dev_pm_low_power.part.6+0x29/0x2e
[ 40.438032] [<c167135f>] acpi_dev_runtime_suspend+0x62/0x7b
[ 40.438036] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.438039] [<c1671393>] acpi_subsys_runtime_suspend+0x1b/0x1e
[ 40.438043] [<c170a49f>] __rpm_callback+0x1f/0x60
[ 40.438047] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.438050] [<c170a4ff>] rpm_callback+0x1f/0x70
[ 40.438054] [<c1671378>] ? acpi_dev_runtime_suspend+0x7b/0x7b
[ 40.438058] [<c170ac23>] rpm_suspend+0x103/0x5d0
[ 40.438062] [<c10961af>] ? __wake_up+0x3f/0x50
[ 40.438066] [<c170b36a>] rpm_idle+0x19a/0x290
[ 40.438070] [<c170bd67>] pm_runtime_work+0x87/0x90
[ 40.438074] [<c106eaf6>] process_one_work+0x106/0x3f0
[ 40.438077] [<c106f9f7>] worker_thread+0x37/0x4a0
[ 40.438081] [<c106f9c0>] ? create_worker+0x1a0/0x1a0
[ 40.438084] [<c10745cb>] kthread+0x9b/0xb0
[ 40.438089] [<c1c31822>] ret_from_kernel_thread+0xe/0x24
[ 40.438093] [<c1074530>] ? kthread_worker_fn+0x130/0x130
[ 40.438096] ---[ end trace 6ff077d2fb3b8eb5 ]---
[ 40.445102] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 40.457334] i2c /dev entries driver
[ 40.445102] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 40.457334] i2c /dev entries driver
[ 40.467212] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 40.486368] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 40.486458] ACPI: Lid Switch [LID0]
[ 40.496779] EFI Variables Facility v0.08 2004-May-17
[ 40.585529] intel_rapl: Found RAPL domain package
[ 40.585532] intel_rapl: Found RAPL domain core
[ 40.784448] input: ENEE3730:00 6243:0001 as /devices/platform/80860F41:02/i2c-2/i2c-ENEE3730:00/0018:6243:0001.0001/input/input2
[ 40.786415] genirq: Flags mismatch irq 8. 00000083 (volume_down) vs. 00000080 (rtc0)
[ 40.786420] gpio-keys gpio-keys.1.auto: Unable to claim irq 8; error -16
[ 40.786447] gpio-keys: probe of gpio-keys.1.auto failed with error -16
[ 40.786607] input: gpio-keys as /devices/platform/gpio-keys.2.auto/input/input4
[ 40.802073] hid-generic 0018:6243:0001.0001: input,hidraw0: I2C HID v1.00 Keyboard [ENEE3730:00 6243:0001] on i2c-ENEE3730:00
[ 40.873616] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 40.886203] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 40.893865] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 40.901079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 40.906065] usb usb2: Product: xHCI Host Controller
[ 40.910902] usb usb2: Manufacturer: Linux 4.7.04.4.7-smp xhci-hcd
[ 40.915785] usb usb2: SerialNumber: 0000:00:14.0
[ 40.922351] hub 2-0:1.0: USB hub found
[ 40.926376] hub 2-0:1.0: 1 port detected
[ 40.981415] [drm] Memory usable by graphics device = 2048M
[ 40.989646] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 40.989668] fb: switching to inteldrmfb from EFI VGA
[ 40.994852] Console: switching to colour dummy device 80x25
[ 40.995064] [drm] Replacing VGA console driver
[ 40.995470] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 40.995488] [drm] Driver supports precise vblank timestamp query.
[ 41.013780] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 41.054542] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 41.056102] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 41.057275] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 41.143640] fbcon: inteldrmfb (fb0) is primary device
[ 41.233119] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 41.401955] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 41.401967] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 41.401976] usb 1-1: Product: USB 2.0 Hub
[ 41.403460] hub 1-1:1.0: USB hub found
[ 41.403538] hub 1-1:1.0: 4 ports detected
[ 41.404016] usb: port power management may be unreliable
[ 41.682001] usb 1-1.2: new high-speed USB device number 3 using xhci_hcd
[ 41.772616] usb 1-1.2: New USB device found, idVendor=7392, idProduct=7811
[ 41.772628] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 41.772637] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 41.772628] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 41.772637] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 41.772645] usb 1-1.2: Manufacturer: Realtek
[ 41.772680] usb 1-1.2: SerialNumber: 00e04c000001
[ 41.851147] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
[ 41.960390] usb 1-1.3: New USB device found, idVendor=5986, idProduct=0673
[ 41.960403] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 41.960411] usb 1-1.3: Product: Lenovo EasyCamera
[ 41.960420] usb 1-1.3: Manufacturer: Bison Corp.
[ 41.960428] usb 1-1.3: SerialNumber: 200901010001
[ 42.053049] Linux video capture interface: v2.00
[ 42.064056] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0673)
[ 42.072972] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
[ 42.073292] usbcore: registered new interface driver uvcvideo
[ 42.073294] USB Video Class driver (1.1.1)
[ 42.185959] usb 1-1.2: Vendor: Realtek
[ 42.185969] usb 1-1.2: Product: 802.11n WLAN Adapter
[ 42.185980] usb 1-1.2: rtl8192cu_parse_efuse: dumping efuse (0x80 bytes):
[ 42.185994] usb 1-1.2: 00: 29 81 00 74 cd 00 00 00
[ 42.186008] usb 1-1.2: 08: ff 00 92 73 11 78 03 41
[ 42.186021] usb 1-1.2: 10: 32 00 85 62 9e ad 74 da
[ 42.186034] usb 1-1.2: 18: 38 3b 48 62 0a 03 52 65
[ 42.186048] usb 1-1.2: 20: 61 6c 74 65 6b 00 16 03
[ 42.186061] usb 1-1.2: 28: 38 30 32 2e 31 31 6e 20
[ 42.186074] usb 1-1.2: 30: 57 4c 41 4e 20 41 64 61
[ 42.186087] usb 1-1.2: 38: 70 74 65 72 00 00 00 00
[ 42.186100] usb 1-1.2: 40: 00 00 00 00 00 00 00 00
[ 42.186112] usb 1-1.2: 48: 00 00 00 00 00 00 00 00
[ 42.186125] usb 1-1.2: 50: 00 00 00 00 00 00 00 00
[ 42.186138] usb 1-1.2: 58: 06 00 26 26 26 00 00 00
[ 42.186151] usb 1-1.2: 60: 28 28 27 00 00 00 00 00
[ 42.186164] usb 1-1.2: 68: 00 00 00 00 11 11 33 00
[ 42.186176] usb 1-1.2: 70: 00 00 00 00 00 00 00 00
[ 42.186189] usb 1-1.2: 78: 10 00 00 00 36 00 00 00
[ 42.186205] usb 1-1.2: RTL8188CU rev A (TSMC) 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
[ 42.186214] usb 1-1.2: RTL8188CU MAC: 74:da:38:3b:48:62
[ 42.186223] usb 1-1.2: rtl8xxxu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 42.207861] usb 1-1.2: Firmware revision 80.0 (signature 0x88c1)
[ 42.605236] usbcore: registered new interface driver rtl8xxxu
[ 43.080517] Console: switching to colour frame buffer device 170x48
[ 43.211771] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 43.404932] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc' as unstable because the skew is too large:
[ 43.416289] clocksource: 'refined-jiffies' wd_now: fffba3e9 wd_last: fffba1f5 mask: ffffffff
[ 43.424184] clocksource: 'tsc' cs_now: 13eb525960 cs_last: 13bdb80ab0 mask: ffffffffffffffff
[ 43.432808] clocksource: Switched to clocksource refined-jiffies
[ 44.000733] Adding 1048572k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:1048572k SS
[ 43.432808] clocksource: Switched to clocksource refined-jiffies
[ 44.000733] Adding 1048572k swap on /dev/mmcblk0p2. Priority:-1 extents:1 across:1048572k SS
[ 44.056716] fuse init (API version 7.25)
[ 65.346667] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
[ 65.516113] random: nonblocking pool is initialized
[ 78.940421] NET: Registered protocol family 10
[ 79.886434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 83.599491] wlan0: authenticate with c0:ff:d4:9e:3c:16
[ 83.604413] wlan0: send auth to c0:ff:d4:9e:3c:16 (try 1/3)
[ 83.606106] wlan0: authenticated
[ 83.610609] wlan0: associate with c0:ff:d4:9e:3c:16 (try 1/3)
[ 83.614307] wlan0: RX AssocResp from c0:ff:d4:9e:3c:16 (capab=0x1411 status=0 aid=8)
[ 83.615079] usb 1-1.2: rtl8xxxu_bss_info_changed: HT supported
[ 83.615715] wlan0: associated
[ 83.615809] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 83.623288] usb 1-1.2: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_START
something happens right at the start of boot. so when its booting when I see a quicker blinking underline I'm happy. Maybe I'lll find some sort of sweet spot where I can get it to trigger reliably.
Last edited by slackartist; 08-09-2016 at 02:39 PM.
It looks like you've had to shutdown or halt improperly?
Please provide a link to the exact laptop you're using, what version of Slackware, what "livedisk" you're talking about, and why are you using kernel 4.7.0?
It looks like you've had to shutdown or halt improperly?
Please provide a link to the exact laptop you're using, what version of Slackware, what "livedisk" you're talking about, and why are you using kernel 4.7.0?
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.
how do I diagnose keyboard problems when experiencing
