LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 08-07-2003, 05:39 PM   #1
jaysinism
LQ Newbie
 
Registered: Aug 2003
Location: Tempe, AZ
Distribution: Slackware 9.0
Posts: 8

Rep: Reputation: 0
Help- USB 2.0 Host Controller


Hi.
I'm pretty new to slackware, I just recently made the jump to use it on my workstation. Everything is running great except. I have a PCMCIA USB 2.0 Host controller. I have my webcam, extrenal CD burner, plugged into it. I know that the system sees it but I can not figure out how to get the webcam and external CD burner functioning. If anyone could help me out I would really appreciate it.
Jaysin
 
Old 08-07-2003, 06:07 PM   #2
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 22,986
Blog Entries: 11

Rep: Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880
Give us the output of

lsmod
lsusb
lspci

please?

Cheers,
Tink
 
Old 08-07-2003, 06:14 PM   #3
jaysinism
LQ Newbie
 
Registered: Aug 2003
Location: Tempe, AZ
Distribution: Slackware 9.0
Posts: 8

Original Poster
Rep: Reputation: 0
Here is the output for lsmod:
:/home/jaysin# lsmod
Module Size Used by Not tainted
keybdev 1952 0 (unused)
mousedev 4212 0 (unused)
hid 18596 0 (unused)
usbkbd 3416 0 (unused)
input 3200 0 [keybdev mousedev hid usbkbd]
usb-storage 60116 0 (unused)
uhci 24560 0 (unused)
ohci1394 16264 0 (unused)
ieee1394 30828 0 [ohci1394]
ymfpci 41000 2
ac97_codec 9512 0 [ymfpci]
soundcore 3332 2 [ymfpci]
pcnet_cs 11936 1
8390 6064 0 [pcnet_cs]
ehci-hcd 14632 0 (unused)
usb-ohci 18856 0 (unused)
usbcore 58144 1 [hid usbkbd usb-storage uhci ehci-hcd usb-ohci]
ds 6568 2 [pcnet_cs]
yenta_socket 9632 2
pcmcia_core 38112 0 [pcnet_cs ds yenta_socket]
ide-scsi 8048 0

Here is the output of lsusb :
:/home/jaysin# lsusb
Unknown line at line 1809
Duplicate HUT Usage Spec at line 2650
Bus 004 Device 001: ID 0000:0000 Virtual Hub
Bus 004 Device 002: ID 046d:c505 Logitech Inc.
Bus 003 Device 001: ID 0000:0000 Virtual Hub
Bus 003 Device 002: ID 093b:0011 Plextor
Bus 002 Device 001: ID 0000:0000 Virtual Hub
Bus 002 Device 002: ID 040a:0002 Kodak Co. DVC-325
Bus 001 Device 001: ID 0000:0000 Virtual Hub

Here is the output of lspci:

:/home/jaysin# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller (rev 02)
00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio Controller] (rev 02)
00:0a.0 Communication controller: Conexant HSF 56k Data/Fax Modem (Mob WorldW SmartDAA) (rev 01)
00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
02:00.0 USB Controller: NEC Corporation USB (rev 41)
02:00.1 USB Controller: NEC Corporation USB (rev 41)
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
root@god:/home/jaysin# lspci
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller (rev 02)
00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio Controller] (rev 02)
00:0a.0 Communication controller: Conexant HSF 56k Data/Fax Modem (Mob WorldW SmartDAA) (rev 01)
00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64)
02:00.0 USB Controller: NEC Corporation USB (rev 41)
02:00.1 USB Controller: NEC Corporation USB (rev 41)
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 02)

Jaysin
 
Old 08-07-2003, 07:00 PM   #4
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 22,986
Blog Entries: 11

Rep: Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880
Looks as if they both had been picked-up
properly, and the card is recognised as a
USB 2 device (ehci-hcd loaded) ...

Check
less /proc/scsi/scsi
and see whether your writer is there...


Cheers,
Tink
 
Old 08-07-2003, 07:12 PM   #5
jaysinism
LQ Newbie
 
Registered: Aug 2003
Location: Tempe, AZ
Distribution: Slackware 9.0
Posts: 8

Original Poster
Rep: Reputation: 0
The results of less /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
/proc/scsi/scsi lines 1-4/4 (END)

Yes that is the correct description of my CD burner and I noticed that It has also reconized my webcam, How do I go about mounting them so that I can use these devices?
Thank you
Jaysin
 
Old 08-07-2003, 10:12 PM   #6
jaysinism
LQ Newbie
 
Registered: Aug 2003
Location: Tempe, AZ
Distribution: Slackware 9.0
Posts: 8

Original Poster
Rep: Reputation: 0
can anyone help me out?
 
Old 08-08-2003, 01:03 AM   #7
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 22,986
Blog Entries: 11

Rep: Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880
Usually a CD-R (CD-RW) will be
/dev/scd0 when picked up by the
drivers properly ...

Try
mount -t iso9660 /dev/scd0 /mnt/cdrom

As for the cam:
See whether you have a /dev/video0

If so, go to http://frehsmeat.net and search
for webcam :)

Cheers,
Tink
 
Old 08-08-2003, 11:22 AM   #8
jaysinism
LQ Newbie
 
Registered: Aug 2003
Location: Tempe, AZ
Distribution: Slackware 9.0
Posts: 8

Original Poster
Rep: Reputation: 0
It says it can't find /dev/video0

mount /dev/video0
mount: can't find /dev/video0 in /etc/fstab or /etc/mtab
 
Old 08-08-2003, 04:34 PM   #9
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 22,986
Blog Entries: 11

Rep: Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880
Quote:
mount /dev/video0
You don't mount video devices ...

Or is this not a webcam, but a photo-camera
with internal memory and you want to access
the pix stored on it?

Cheers,
Tink
 
Old 08-09-2003, 01:53 PM   #10
jaysinism
LQ Newbie
 
Registered: Aug 2003
Location: Tempe, AZ
Distribution: Slackware 9.0
Posts: 8

Original Poster
Rep: Reputation: 0
Yes "Bus 002 Device 002: ID 040a:0002 Kodak Co. DVC-325" This is the description of my USB Webcam, not a Photo-camera. I just want to be able to use my webcam.
 
Old 08-09-2003, 03:42 PM   #11
Tinkster
Moderator
 
Registered: Apr 2002
Location: in a fallen world
Distribution: slackware by choice, others too :} ... android.
Posts: 22,986
Blog Entries: 11

Rep: Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880Reputation: 880
Blessed be Google, and the man who
can use it shall be called Guru :D

http://www.qbik.ch/usb/devices/showdev.php?id=193

Cheers,
Tink
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
uhci.c: fcc0: host controller halted. very bad mpyusko Linux - Hardware 1 05-29-2005 03:35 PM
Boot hangup with Universal Host Controller Interface Driver v2.2 Degei Fedora - Installation 0 08-14-2004 02:32 PM
system locks up, host controller halted davedenis Linux - Software 2 05-26-2004 09:31 PM
Host controller halted. very bad pembo13 Linux - Hardware 0 04-11-2004 05:38 PM
USB pendrive kills host controller fridgehead Linux - Hardware 2 09-23-2003 05:53 AM


All times are GMT -5. The time now is 07:27 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration