LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 08-29-2002, 04:03 AM   #16
Aussie
Senior Member
 
Registered: Sep 2001
Location: Brisvegas, Antipodes
Distribution: Slackware
Posts: 4,590

Rep: Reputation: 56

Do "lspci -v" for more info.
 
Old 08-29-2002, 11:23 AM   #17
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
this is the output from lspci -v
As far as I can see the hollywood plus isn't clashing with anything.....?




00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller (rev 13)
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Memory at ea114000 (32-bit, prefetchable) [size=4K]
I/O ports at c000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-e7ffffff

00:09.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
Flags: bus master, medium devsel, latency 32, IRQ 3
Memory at ea000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1

00:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Augidy Player
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at c400 [size=32]
Capabilities: [dc] Power Management version 2

00:0a.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Gameport
Flags: bus master, medium devsel, latency 32
I/O ports at c800 [size=8]
Capabilities: [dc] Power Management version 2

00:0a.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
Subsystem: Creative Labs: Unknown device 0010
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ea116000 (32-bit, non-prefetchable) [size=2K]
Memory at ea110000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at cc00 [size=256]
Memory at ea115000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

00:0c.0 Communication controller: Conexant HCF 56k Data/Fax/Voice Modem (rev 08)
Subsystem: Elsa AG: Unknown device 1510
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at ea100000 (32-bit, non-prefetchable) [size=64K]
I/O ports at d000 [size=8]
Capabilities: [40] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at d400 [size=16]
Capabilities: [c0] Power Management version 2

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1e) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2

00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1e) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2

00:11.4 Non-VGA unclassified device: VIA Technologies, Inc. VT8235 ACPI (rev 10)
Flags: medium devsel
Capabilities: [68] Power Management version 2

01:05.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4600] (rev a2) (prog-if 00 [VGA])
Subsystem: Micro-star International Co Ltd: Unknown device 8725
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
 
Old 08-29-2002, 06:46 PM   #18
Aussie
Senior Member
 
Registered: Sep 2001
Location: Brisvegas, Antipodes
Distribution: Slackware
Posts: 4,590

Rep: Reputation: 56
It's not sharing an IRQ with a PCI device but it still might be sharing with a system device, check your ide conrtrollers, etc..
 
Old 08-30-2002, 05:42 AM   #19
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
How do I do that?
 
Old 08-30-2002, 06:22 AM   #20
Aussie
Senior Member
 
Registered: Sep 2001
Location: Brisvegas, Antipodes
Distribution: Slackware
Posts: 4,590

Rep: Reputation: 56
In the kde control center under Information-->Interrupts.
Or do "cat /proc/interrupts"

Last edited by Aussie; 08-30-2002 at 06:25 AM.
 
Old 08-30-2002, 03:46 PM   #21
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
This evening I've opened the box up and removed a PCI modem..

This is now my PCI config followed by the system interupts..

can't see anything clashing...

00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller (rev 13)
Flags: bus master, medium devsel, latency 32
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Memory at ea105000 (32-bit, prefetchable) [size=4K]
I/O ports at c000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-e7ffffff

00:09.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
Flags: bus master, medium devsel, latency 32, IRQ 3
Memory at ea000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1

00:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Augidy Player
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at c400 [size=32]
Capabilities: [dc] Power Management version 2

00:0a.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Gameport
Flags: bus master, medium devsel, latency 32
I/O ports at c800 [size=8]
Capabilities: [dc] Power Management version 2

00:0a.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
Subsystem: Creative Labs: Unknown device 0010
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ea104000 (32-bit, non-prefetchable) [size=2K]
Memory at ea100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at cc00 [size=256]
Memory at ea106000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10)
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2

00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1e) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2

00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1e) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2

00:11.4 Non-VGA unclassified device: VIA Technologies, Inc. VT8235 ACPI (rev 10)
Flags: medium devsel
Capabilities: [68] Power Management version 2

01:05.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti4600] (rev a2) (prog-if 00 [VGA])
Subsystem: Micro-star International Co Ltd: Unknown device 8725
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0

CPU0
0: 62429 XT-PIC timer
1: 530 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
11: 12 XT-PIC usb-uhci, usb-uhci, eth0
12: 30 XT-PIC PS/2 Mouse
14: 2989 XT-PIC ide0
15: 7 XT-PIC ide1
NMI: 0
ERR: 0
 
Old 08-30-2002, 07:24 PM   #22
Aussie
Senior Member
 
Registered: Sep 2001
Location: Brisvegas, Antipodes
Distribution: Slackware
Posts: 4,590

Rep: Reputation: 56
That looks ok, are you still getting the time outs?
 
Old 08-31-2002, 04:55 AM   #23
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
Yeah, still getting the timeouts...

Am completely stuck....
 
Old 08-31-2002, 05:12 AM   #24
Aussie
Senior Member
 
Registered: Sep 2001
Location: Brisvegas, Antipodes
Distribution: Slackware
Posts: 4,590

Rep: Reputation: 56
Have you tried the cvs version?
 
Old 08-31-2002, 06:41 AM   #25
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
Nope, am not entirely sure how to use cvs... or actually what exactly it is... would a cvs build be newer but poteintially unstable?
 
Old 08-31-2002, 06:51 AM   #26
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
Also would there be any permission or user problems... I'm installing this as root.. currently I'm downloading stuff in windows (fat) as I haven't set up the adsl connection under slack... so then I'm copying the tar.gz to /usr/src extracting and making...


Hmm actually when the window partition is mounted all the permissions are very strict... regular users can do next to nothing...

Previously I would use root for everything (really bad i know).. As this machine is now a gateway for a home lan, and house mates will use this machine... I'm trying to do everything right.. Although I'm still not very good at knowing when i should/shouldn't be root...
 
Old 08-31-2002, 07:04 AM   #27
Aussie
Senior Member
 
Registered: Sep 2001
Location: Brisvegas, Antipodes
Distribution: Slackware
Posts: 4,590

Rep: Reputation: 56
Did you chmod the em8300 devices?
 
Old 08-31-2002, 09:24 AM   #28
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
what permissions does they need?
 
Old 08-31-2002, 09:53 AM   #29
Aussie
Senior Member
 
Registered: Sep 2001
Location: Brisvegas, Antipodes
Distribution: Slackware
Posts: 4,590

Rep: Reputation: 56
Ok this is what i have mine set to,
Code:
bern@grendel bern$ ll /dev/em8300*
lrwxrwxrwx    1 root     root           13 Aug 22 20:58 /dev/em8300 -> /dev/em8300-0
crw-rw-rw-    1 root     root     121,   0 Aug 22 20:58 /dev/em8300-0
lrwxrwxrwx    1 root     root           16 Aug 22 20:58 /dev/em8300_ma -> /dev/em8300_ma-0
crw-rw-rw-    1 root     root     121,   2 Aug 22 20:58 /dev/em8300_ma-0
lrwxrwxrwx    1 root     root           16 Aug 22 20:58 /dev/em8300_mv -> /dev/em8300_mv-0
crw-rw-rw-    1 root     root     121,   1 Aug 22 20:58 /dev/em8300_mv-0
lrwxrwxrwx    1 root     root           16 Aug 22 20:58 /dev/em8300_sp -> /dev/em8300_sp-0
crw-rw-rw-    1 root     root     121,   3 Aug 22 20:58 /dev/em8300_sp-0
bern@grendel bern$
And this is what i have in /etc/modules.conf
Code:
alias char-major-121 em8300
pre-install em8300 modprobe adv717x
post-install em8300 em8300init
options adv717x pixelport_16bit=0 pixelport_other_pal=0 swap_redblue_pal=0
options em8300 dicom_fix=1 dicom_control=1 dicom_other_pal=0
"chmod 666" will set the correct permissions and you'll need to play around with the module options to get the tv out working correctly.
 
Old 08-31-2002, 10:20 AM   #30
mr_mandrill
Member
 
Registered: Aug 2002
Location: UK
Distribution: Slackware 8.1
Posts: 74

Original Poster
Rep: Reputation: 15
This probably doesn't below in this thread but i'll ask the question anyway...

As I mentioned before I'm having difficulty working out when i need to be root and when not...

Is it the case that all things compiled from source need to be done so as root?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
iptables config probs geniarse Linux - Networking 4 10-28-2004 12:18 PM
RH9 2.6.0 & 2.6.5 Compilation probs on emachines notebook. SgtBhaji Linux - Laptop and Netbook 0 04-06-2004 07:58 AM
Fasttrack 378 and SuSe 9.0, compilation probs (reeeally urgent) danny2055 Linux - Hardware 0 12-13-2003 04:55 PM
Kernel Compilation Probs MrSmee Linux - Newbie 4 09-17-2003 03:19 PM
Network config probs boltar Linux - Networking 2 06-17-2001 11:24 AM


All times are GMT -5. The time now is 03:26 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration