LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 08-13-2007, 05:45 PM   #1
alphisb0t
Member
 
Registered: Jun 2004
Distribution: gentoo 2008.desktop
Posts: 110

Rep: Reputation: 15
devices missing: fresh slack 12 install


Hi all. I've never had this problem before but I can't find the /dev/hdc device. The reason: its not there. I know there is a new HAL thing going and I'm not sure how it works but I'd like to be able to mount a cd/dvd from the console like I used to before.

Any ideas as to why /dev/hd* is missing as well as /dev/sd[anything-not-a]?

Thanks.
 
Old 08-13-2007, 06:19 PM   #2
Okie
Member
 
Registered: Mar 2002
Location: Oklahoma
Posts: 964

Rep: Reputation: 34
on Slackware-12 in /etc/fstab the cdrom device is commented out, just fire up your favorite text editor...
 
Old 08-13-2007, 06:23 PM   #3
hitest
Senior Member
 
Registered: Mar 2004
Location: Prince Rupert, B.C., Canada
Distribution: Slackware, OpenBSD
Posts: 4,192

Rep: Reputation: 548Reputation: 548Reputation: 548Reputation: 548Reputation: 548Reputation: 548
Also check out the sticky at the top of this forum on HAL and plugdev:-)
 
Old 08-13-2007, 11:04 PM   #4
alphisb0t
Member
 
Registered: Jun 2004
Distribution: gentoo 2008.desktop
Posts: 110

Original Poster
Rep: Reputation: 15
Thanks for the replies. Unfortunately I can't mount a device that does not have a corresponding device file. Adding fstab references to devices that don't exist wont help me.

Let me explain better:
/dev/ has no cdrom or hd*. All it has is sda with the 1-4 partitions on it. All of which are just hdd partitions I've made.

Why wouldn't there be a /dev/hdc or /dev/cdrom symlink? Any ideas?
 
Old 08-14-2007, 05:38 PM   #5
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: SlackwareŽ
Posts: 11,292
Blog Entries: 3

Rep: Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447
Quote:
Originally Posted by alphisb0t View Post
Thanks for the replies. Unfortunately I can't mount a device that does not have a corresponding device file. Adding fstab references to devices that don't exist wont help me.

Let me explain better:
/dev/ has no cdrom or hd*. All it has is sda with the 1-4 partitions on it. All of which are just hdd partitions I've made.

Why wouldn't there be a /dev/hdc or /dev/cdrom symlink? Any ideas?
Hi,

Which kernel?

Check out from cli;
Code:
willi:~# uname -a
Linux willi 2.6.21.5-smp #1 SMP Tue Jun 19 14:52:25 CDT 2007 i686 AMD Athlon(tm) AuthenticAMD GNU/Linux

willi:~# cat /usr/src/linux/.config |grep -i cd
CONFIG_BLK_DEV_IDECD=y

willi:~# dmesg |grep -i hd      #look to see what was seen at boot

willi:~# lspci -vv              #device information
                                #for controller
willi:~# ls -al /proc/ide       #you could look at the ide
total 0
dr-xr-xr-x   4 root root 0 2007-08-14 17:24 ./
dr-xr-xr-x 116 root root 0 2007-08-05 13:28 ../
-r--r--r--   1 root root 0 2007-08-14 17:24 drivers
lrwxrwxrwx   1 root root 8 2007-08-14 17:24 hda -> ide0/hda/
lrwxrwxrwx   1 root root 8 2007-08-14 17:24 hdc -> ide1/hdc/
lrwxrwxrwx   1 root root 8 2007-08-14 17:24 hdd -> ide1/hdd/
dr-xr-xr-x   3 root root 0 2007-08-14 17:24 ide0/
dr-xr-xr-x   4 root root 0 2007-08-14 17:24 ide1/
If it is a 'udev' problem then look;

Code:
willi:~# cat /etc/udev/rules.d/75-optical-devices.rules
# Local optical devices rules to make links to your
# optical devices
#
# These rules were generated by cdrom-symlinks.sh, but you
# can customize them.
#
# You may edit them as needed.
# (If, for example, your machine has more than one CD or
# DVD drive and you need to be sure they will always be
# given the same symlinks.)
#
# If you delete this file, /lib/udev/cdrom-symlinks.sh will
# try to generate it again the next time udev is started.

ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:0", SYMLINK+="cdrom0"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:0", SYMLINK+="cdrom"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="cdrom1"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="cdr1"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="cdr"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="cdrw1"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="cdrw"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="cdwriter1"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="cdwriter"
ENV{ID_CDROM}=="?*", ENV{ID_PATH}=="pci-0000:00:11.1-ide-1:1", SYMLINK+="writer"
You can then see if any thing was recognized or not configured properly.
 
Old 08-14-2007, 08:21 PM   #6
rworkman
Slackware Contributor
 
Registered: Oct 2004
Location: Tuscaloosa, Alabama (USA)
Distribution: Slackware
Posts: 1,913

Rep: Reputation: Disabled
Quote:
Originally Posted by alphisb0t View Post
Hi all. I've never had this problem before but I can't find the /dev/hdc device. The reason: its not there. I know there is a new HAL thing going and I'm not sure how it works but I'd like to be able to mount a cd/dvd from the console like I used to before.

Any ideas as to why /dev/hd* is missing as well as /dev/sd[anything-not-a]?

Is this a custom kernel? If so, make sure you have CONFIG_BLK_DEV_IDECD built statically instead of as a module. If not, your optical devices will probably be assigned /dev/sr? nodes, and in my experience, lots of the sysfs properties aren't properly exported by /lib/udev/cdrom_id with that configuration.

By the way, if this is indeed on a custom kernel, this is yet one more chalk mark on the wall for reproducing "bugs" on a stock kernel prior to reporting them publicly.
 
Old 08-15-2007, 06:08 AM   #7
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: SlackwareŽ
Posts: 11,292
Blog Entries: 3

Rep: Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447
Quote:
Originally Posted by rworkman View Post
Is this a custom kernel? <snip>

By the way, if this is indeed on a custom kernel, this is yet one more chalk mark on the wall for reproducing "bugs" on a stock kernel prior to reporting them publicly.
Hi,

Robby, I like that last statement. I've seen it lately in your posts. Does apply to a lot of the problems but not all.
 
Old 08-16-2007, 01:32 PM   #8
alphisb0t
Member
 
Registered: Jun 2004
Distribution: gentoo 2008.desktop
Posts: 110

Original Poster
Rep: Reputation: 15
Thanks again for your replies. Here are the results of the commands one of you had asked for:

1)Yes the kernel is custom: 2.6.22.1
2)CONFIG_BLK_DEV_IDECD=m (compiled as a module)
3)dmesg |grep -i hd (has no results. my drive is sda)
4)ls -al /proc/ide (results in only 1 file "drivers")
5)cat /etc/udev/rules.d/75-optical-devices.rules (this file was longer but didn't have some of the ones you had in yours)

Someone mentioned that I should compile in IDECD so I did. I'd like to point out that after modprobing IDECD there was no /dev/sr anything. I have just rebuilt the kernel with CONFIG_BLK_DEV_IDECD=y and still no cdrom.

Any more suggestions?
 
Old 08-16-2007, 02:19 PM   #9
BCarey
Senior Member
 
Registered: Oct 2005
Location: New Mexico
Distribution: Slackware
Posts: 1,476

Rep: Reputation: Disabled
Quote:
Originally Posted by alphisb0t View Post
Any more suggestions?
Try to reproduce with a stock kernel, as already suggested.

Brian
 
Old 08-16-2007, 05:30 PM   #10
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: SlackwareŽ
Posts: 11,292
Blog Entries: 3

Rep: Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447
Quote:
Originally Posted by alphisb0t View Post
Thanks again for your replies. Here are the results of the commands one of you had asked for:

1)Yes the kernel is custom: 2.6.22.1
2)CONFIG_BLK_DEV_IDECD=m (compiled as a module)
3)dmesg |grep -i hd (has no results. my drive is sda)
4)ls -al /proc/ide (results in only 1 file "drivers")
5)cat /etc/udev/rules.d/75-optical-devices.rules (this file was longer but didn't have some of the ones you had in yours)

Someone mentioned that I should compile in IDECD so I did. I'd like to point out that after modprobing IDECD there was no /dev/sr anything. I have just rebuilt the kernel with CONFIG_BLK_DEV_IDECD=y and still no cdrom.

Any more suggestions?
Hi,

Let us see the output from 'dmesg', 'lspci -vv', please post them. Which channel is the cdrom device on? Master or slave with what?

Quote:
3)dmesg |grep -i hd (has no results. my drive is sda)
Your cdrom is a sda?? I was looking for a hd device for the cdrom at boot or possibly other device assignment for it. 'dmesg' would help.

Quote:
4)ls -al /proc/ide (results in only 1 file "drivers")
Do a ;
Code:
amos2:~# cat /proc/ide/drivers |less

ide-disk version 1.18 
ide-cdrom version 4.61  <-- this one
ide-floppy version 0.99.newide
Make sure the driver(s) are there. Look at the file and share the info.

Quote:
5)cat /etc/udev/rules.d/75-optical-devices.rules (this file was longer but didn't have some of the ones you had in yours)
The rules set that I posted was for my machine, yours will be different.
As stated the 'cdrom-symlinks.sh' generates the rule set for each machine.

Please note the comments in the rules file. Move 'mv' the rules file to a unique file. Then reboot and see what is changed in the file.

Quote:

# Local optical devices rules to make links to your
# optical devices
#
# These rules were generated by cdrom-symlinks.sh, but you
# can customize them.
#
# You may edit them as needed.
# (If, for example, your machine has more than one CD or
# DVD drive and you need to be sure they will always be
# given the same symlinks.)
#
# If you delete this file, /lib/udev/cdrom-symlinks.sh will
# try to generate it again the next time udev is started.
 
Old 08-24-2007, 12:19 PM   #11
alphisb0t
Member
 
Registered: Jun 2004
Distribution: gentoo 2008.desktop
Posts: 110

Original Poster
Rep: Reputation: 15
Here are the outputs you've requested.
dmesg:
Code:
Linux version 2.6.22.1-smp (rage@mobiledrone001) (gcc version 4.1.2) #15 Wed Aug 22 20:10:50 EDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f7dfffc (usable)
 BIOS-e820: 000000001f7dfffc - 000000001f7fffc0 (ACPI data)
 BIOS-e820: 000000001f7fffc0 - 000000001f800000 (ACPI NVS)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
503MB LOWMEM available.
Entering add_active_range(0, 0, 128991) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   128991
  HighMem    128991 ->   128991
early_node_map[1] active PFN ranges
    0:        0 ->   128991
On node 0 totalpages: 128991
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 975 pages used for memmap
  Normal zone: 123920 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000E5010, 0014 (r0 TOSINV)
ACPI: RSDT 1F7F8E57, 0034 (r1 TOSINV RSDT_000      100 ABCD    10200)
ACPI: FACP 1F7FFB30, 0074 (r1 TOSINV FACP_000      100 0000    10200)
ACPI: DSDT 1F7F94A0, 6683 (r1 TOSINV SONOMA       1004 INTL  2002036)
ACPI: FACS 1F7FFFC0, 0040
ACPI: MCFG 1F7FFBC0, 003C (r1 INSYDE MCFG_000 30303030 0000 30303030)
ACPI: SSDT 1F7F9045, 0237 (r1  PmRef  Cpu0Ist     3000 INTL 20030522)
ACPI: SSDT 1F7F8E8B, 01BA (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 20000000 (gap: 1f800000:e0700000)
Built 1 zonelists.  Total pages: 127984
Kernel command line: BOOT_IMAGE=2.6.22.1 ro root=804
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1729.278 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 506932k/515964k available (2504k kernel code, 8412k reserved, 848k data, 300k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffeb000 - 0xfffff000   (  80 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
    lowmem  : 0xc0000000 - 0xdf7df000   ( 503 MB)
      .init : 0xc044a000 - 0xc0495000   ( 300 kB)
      .data : 0xc0372173 - 0xc04462e4   ( 848 kB)
      .text : 0xc0100000 - 0xc0372173   (2504 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3461.84 BogoMIPS (lpj=6923695)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9ff 00000000 00000000 00002040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: setting ELCR to 0200 (from 0c20)
NET: Registered protocol family 16
ACPI: ACPI Dock Station Driver 
EISA bus registered
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xea934, last bus=5
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1300-133f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#05) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *5
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *10)
ACPI: Power Resource [PFA1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:05:06.0
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
pnp: 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
pnp: 00:05: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:05: iomem range 0xf0008000-0xf000bfff has been reserved
pnp: 00:05: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:05: iomem range 0xfed18000-0xfed18fff has been reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1c.0
  IO window: c000-dfff
  MEM window: cc000000-cfffffff
  PREFETCH window: 9c000000-9fffffff
PCI: Bridge: 0000:00:1c.1
  IO window: a000-bfff
  MEM window: c8000000-cbffffff
  PREFETCH window: 98000000-9bffffff
PCI: Bus 6, cardbus bridge: 0000:05:06.0
  IO window: 00008000-000080ff
  IO window: 00008400-000084ff
  PREFETCH window: 88000000-8bffffff
  MEM window: bc000000-bfffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 8000-9fff
  MEM window: b8000000-c7ffffff
  PREFETCH window: 88000000-97ffffff
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
apm: BIOS not found.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Switched to high resolution mode on CPU 0
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:01:00.0 to 64
sky2 0000:01:00.0: v1.14 addr 0xcc000000 irq 11 Yukon-FE (0xb7) rev 1
sky2 eth0: addr 00:a0:d1:2d:a9:ae
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108 irq 15
ata1.00: ATA-6: TOSHIBA MK6032GSX, AS311G, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.50, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6032GS AS31 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.50 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg1 type 5
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2J] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 300k freed
intel_rng: FWH not detected
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xa0000000
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Yenta: CardBus bridge found at 0000:05:06.0 [1179:ff10]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:05:06.0, mfunc 0x01a11b22, devctl 0x66
Yenta: ISA IRQ mask 0x00f8, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
pcmcia: parent PCI bridge I/O window: 0x8000 - 0x9fff
cs: IO port probe 0x8000-0x9fff: clean.
pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xc7ffffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x97ffffff
sdhci: SDHCI controller found at 0000:05:06.3 [104c:803c] (rev 0)
ACPI: PCI Interrupt 0000:05:06.3[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
mmc0: SDHCI at 0xb8009000 irq 11 DMA
ACPI: PCI Interrupt 0000:05:06.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[b8000000-b80007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: excluding 0x300-0x307 0x310-0x31f
cs: IO port probe 0xa00-0xaff: clean.
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00080da0d12da9ae]
EXT3 FS on sda4, internal journal
Capability LSM initialized
input: PS/2 Synaptics TouchPad as /class/input/input1
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS volume version 3.1.
intel_rng: FWH not detected
sky2 eth0: enabling interface
sky2 eth0: ram buffer 4K
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
 
Old 08-24-2007, 12:19 PM   #12
alphisb0t
Member
 
Registered: Jun 2004
Distribution: gentoo 2008.desktop
Posts: 110

Original Poster
Rep: Reputation: 15
lspci -vv
Code:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at e000 [size=8]
	Region 2: Memory at a0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at d0080000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: [d0] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at fabf8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [70] Express Unknown type IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
		Link: Latency L0s <64ns, L1 <1us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed unknown, Width x0

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000dfff
	Memory behind bridge: cc000000-cfffffff
	Prefetchable memory behind bridge: 000000009c000000-000000009fffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
		Link: Latency L0s <1us, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 2, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device ff10
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000a000-0000bfff
	Memory behind bridge: c8000000-cbffffff
	Prefetchable memory behind bridge: 0000000098000000-000000009bffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
		Link: Latency L0s <1us, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x0
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 3, PowerLimit 6.500000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Toshiba America Info Systems Unknown device ff10
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 4: I/O ports at 1200 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 5
	Region 4: I/O ports at 1220 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at 1240 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at 1260 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=09, sec-latency=32
	I/O behind bridge: 00008000-00009fff
	Memory behind bridge: b8000000-c7ffffff
	Prefetchable memory behind bridge: 0000000088000000-0000000097ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device 0000

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) (prog-if 80 [Master])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 10
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 1100 [size=16]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 10)
	Subsystem: Toshiba America Info Systems Marvell 88E8036 Fast Ethernet Controller (Inventec)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at cc000000 (64-bit, non-prefetchable) [size=16K]
	Region 2: I/O ports at c000 [size=256]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [e0] Express Legacy Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
		Link: Latency L0s <256ns, L1 unlimited
		Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x1

05:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
	Subsystem: Intel Corporation Unknown device 2741
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (750ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b800a000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-

05:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 128 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b8001000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 88000000-8bfff000 (prefetchable)
	Memory window 1: bc000000-bffff000
	I/O window 0: 00008000-000080ff
	I/O window 1: 00008400-000084ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

05:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (500ns min, 1000ns max), Cache Line Size: 16 bytes
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at b8004000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+

05:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
	Interrupt: pin C routed to IRQ 11
	Region 0: Memory at b8008000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller (prog-if 01)
	Subsystem: Toshiba America Info Systems Unknown device ff10
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at b8009000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I have no idea what setting the dvd drive is in (master/slave). Its a laptop and don't know how they organize typical ide/sata devices internally.

Quote:
Your cdrom is a sda?? I was looking for a hd device for the cdrom at boot or possibly other device assignment for it. 'dmesg' would help.
Sorry let me clear that up. My drives are sda but my cd/dvd drive should be hdc. Unfortunately /dev/hdc doesn't exist.


cat /proc/ide/drivers |less
Code:
ide-cdrom version 4.61
ide-floppy version 0.99.newide
I hope this information is useful to someone. I still have no cd/dvd drive support.

Thanks!
 
Old 08-26-2007, 11:20 PM   #13
alphisb0t
Member
 
Registered: Jun 2004
Distribution: gentoo 2008.desktop
Posts: 110

Original Poster
Rep: Reputation: 15
Bump!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Old 08-27-2007, 01:47 PM   #14
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: SlackwareŽ
Posts: 11,292
Blog Entries: 3

Rep: Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447Reputation: 1447
Quote:
Originally Posted by alphisb0t View Post
Bump!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hi,

Did you ever recompile the kernel to static include the 'CONFIG_BLK_DEV_IDECD' instead of a module?
 
Old 08-28-2007, 08:38 AM   #15
alphisb0t
Member
 
Registered: Jun 2004
Distribution: gentoo 2008.desktop
Posts: 110

Original Poster
Rep: Reputation: 15
Quote:
Someone mentioned that I should compile in IDECD so I did
Yes I did.

Slackware is my #1 fave distro. It has never failed me like this. Why doesn't my CDRom work and why on earth did they break i810 x11 drivers which was flawless in slack 11? ...seriously wtf is going on here.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slack 10 - No Sound After Fresh Install IamI Slackware 8 06-16-2005 08:30 PM
fresh slack 10.1 install (2.4.29) on a D915GEV MB coocoopuff Slackware 1 05-30-2005 12:41 PM
Mandrake 9.1 Fresh install - no sound devices. BongFish Linux - Hardware 6 09-10-2003 06:26 AM
no network after fresh Slack 9 install major.tom Slackware 4 08-04-2003 04:01 PM
Can't boot fresh slack-9b install. gusgorman Slackware 8 02-21-2003 07:27 PM


All times are GMT -5. The time now is 10:29 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration