SlackwareThis Forum is for the discussion of Slackware Linux.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
# cdrecord -scanbus | grep CDRW
cdrecord: Warning: Running on Linux-2.6.22
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
Linux sg driver version: 3.5.34
1,0,0 100) 'TSSTcorp' 'CDRW/DVD TSL462C' 'DE01' Removable CD-ROM
so its like its there.. but where?
any pointers?
there is no /dev/hd* , /dev/cdr* , or /dev/sc* right now. this drive worked fine with a bigger (everything compiled in ) kernel.
+ieee1394: raw1394: /dev/raw1394 device initialized
+Yenta: CardBus bridge found at 0000:05:01.0 [1028:01cc]
+Yenta O2: res at 0x94/0xD4: 00/ea
+Yenta O2: enabling read prefetch/write burst
+Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
+Socket status: 30000410
+pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
+cs: IO port probe 0x2000-0x2fff: clean.
+pcmcia: parent PCI bridge Memory window: 0xef900000 - 0xef9fffff
+pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
usbmon: debugfs is not available
-PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
-serio: i8042 KBD port at 0x60,0x64 irq 1
-serio: i8042 AUX port at 0x60,0x64 irq 12
-mice: PS/2 mouse device common for all mice
-usbcore: registered new interface driver hiddev
-usbcore: registered new interface driver usbhid
-drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
-TCP cubic registered
-NET: Registered protocol family 1
-NET: Registered protocol family 17
-Starting balanced_irq
-Using IPI No-Shortcut mode
-input: AT Translated Set 2 keyboard as /class/input/input0
-RAMDISK: Compressed image found at block 0
-VFS: Mounted root (ext2 filesystem).
-Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
-ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
-ReiserFS: sda9: found reiserfs format "3.6" with standard journal
-ReiserFS: sda9: using ordered data mode
-ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
-ReiserFS: sda9: checking transaction log (sda9)
-ReiserFS: sda9: Using r5 hash to sort names
-VFS: Mounted root (reiserfs filesystem) readonly.
-Trying to move old root to /initrd ... okay
-Freeing unused kernel memory: 212k freed
-Adding 522072k swap on /dev/sda6. Priority:-1 extents:1 across:522072k
-tg3.c:v3.77 (May 31, 2007)
-ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
-PCI: Setting latency timer of device 0000:03:00.0 to 64
-eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:08:1e:1c
-eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
-eth0: dma_rwctrl[76180000] dma_mask[64-bit]
-Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
-00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-USB Universal Host Controller Interface driver v3.0
-ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 21
+ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
-ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80000
-intel_rng: FWH not detected
+ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
-Yenta: CardBus bridge found at 0000:05:01.0 [1028:01cc]
-ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 21
+USB Universal Host Controller Interface driver v3.0
+ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
-uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000bf80
+uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
-Yenta O2: res at 0x94/0xD4: 00/ea
-Yenta O2: enabling read prefetch/write burst
-Linux agpgart interface v0.102 (c) Dave Jones
-iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
-iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
-iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
-ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 17
+ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
-Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
-Socket status: 30000410
-pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
-cs: IO port probe 0x2000-0x2fff: clean.
-pcmcia: parent PCI bridge Memory window: 0xef900000 - 0xef9fffff
-pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
-uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
+uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
@@ -401,84 +398,77 @@
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:05:01.4[A] -> GSI 19 (level, low) -> IRQ 20
-agpgart: Detected an Intel 945GM Chipset.
-agpgart: Detected 7932K stolen memory.
-agpgart: AGP aperture is 256M @ 0xd0000000
-ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[ef9ff000-ef9ff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
-ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 17
-PCI: Setting latency timer of device 0000:00:1b.0 to 64
-usb 2-2: new full speed USB device using uhci_hcd and address 2
pccard: PCMCIA card inserted into slot 0
-cs: memory probe 0xef900000-0xef9fffff: excluding 0xef900000-0xef90ffff<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18
- 0xef9f0000-0xef9fffff
+cs: memory probe 0xef900000-0xef9fffff: excluding 0xef900000-0xef90ffff 0xef9f0000-0xef9fffff
pcmcia: registering new device pcmcia0.0
+usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
-cs: IO port probe 0xc00-0xcff: clean.
-cs: IO port probe 0x820-0x8ff: clean.
-cs: IO port probe 0x800-0x80f: excluding 0x808-0x80f
-cs: IO port probe 0x3e0-0x4ff: clean.
-cs: IO port probe 0x100-0x3af: clean.
-cs: IO port probe 0xa00-0xaff: clean.
-parport0: PC-style at 0x378, irq 3 [PCSPP,TRISTATE,EPP]
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
-input: USB Compliant MOUSE as /class/input/input1
-input: USB HID v1.10 Mouse [USB Compliant MOUSE] on usb-0000:00:1d.3-1
-ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc00003218141]
usb 3-1.2: new full speed USB device using uhci_hcd and address 3
-ndiswrapper version 1.47 loaded (smp=yes)
-ndiswrapper: driver bcmwl5 (Broadcom,11/02/2005, 4.10.40.0) loaded
-ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 18
-PCI: Setting latency timer of device 0000:02:00.0 to 64
-ndiswrapper: using IRQ 18
usb 3-1.2: configuration #1 chosen from 1 choice
-wlan0: ethernet device 00:16:ce:67:85:b5 using NDIS driver: bcmwl5, version: 0x40a2800, NDIS version: 0x501, vendor: '', 14E4:4311.5.conf
-wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
-usbcore: registered new interface driver ndiswrapper
+usbcore: registered new interface driver usblp
+drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
+Initializing USB Mass Storage driver...
+usbcore: registered new interface driver usb-storage
+USB Mass Storage support registered.
+input: USB Compliant MOUSE as /class/input/input3
+input: USB HID v1.10 Mouse [USB Compliant MOUSE] on usb-0000:00:1d.3-1
+usbcore: registered new interface driver usbhid
+drivers/usb/input/hid-core.c: v2.6:USB HID core driver
+PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
+serio: i8042 KBD port at 0x60,0x64 irq 1
+serio: i8042 AUX port at 0x60,0x64 irq 12
+mice: PS/2 mouse device common for all mice
+input: AT Translated Set 2 keyboard as /class/input/input4
+TCP cubic registered
+NET: Registered protocol family 1
+NET: Registered protocol family 17
+Starting balanced_irq
+Using IPI No-Shortcut mode
+input: PS/2 Mouse as /class/input/input5
+input: AlpsPS/2 ALPS GlidePoint as /class/input/input6
+ReiserFS: sda9: found reiserfs format "3.6" with standard journal
+ReiserFS: sda9: using ordered data mode
+ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
+ReiserFS: sda9: checking transaction log (sda9)
+ReiserFS: sda9: Using r5 hash to sort names
+VFS: Mounted root (reiserfs filesystem) readonly.
+Freeing unused kernel memory: 208k freed
+Adding 522072k swap on /dev/sda6. Priority:-1 extents:1 across:522072k
+tg3.c:v3.75 (March 23, 2007)
+ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 19
+PCI: Setting latency timer of device 0000:03:00.0 to 64
+Linux agpgart interface v0.102 (c) Dave Jones
+agpgart: Detected an Intel 945GM Chipset.
+eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:c5:08:1e:1c
+eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[1] TSOcap[1]
+eth0: dma_rwctrl[76180000] dma_mask[64-bit]
+agpgart: Detected 7932K stolen memory.
+agpgart: AGP aperture is 256M @ 0xd0000000
+cs: IO port probe 0xc00-0xcff: clean.
+cs: IO port probe 0x820-0x8ff: clean.
+cs: IO port probe 0x800-0x80f: excluding 0x808-0x80f
+cs: IO port probe 0x3e0-0x4ff: clean.
+cs: IO port probe 0x100-0x3af: clean.
+cs: IO port probe 0xa00-0xaff: clean.
+ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18
+parport0: PC-style at 0x378, irq 3 [PCSPP,TRISTATE,EPP]
+ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
+PCI: Setting latency timer of device 0000:00:1b.0 to 64
i2c /dev entries driver
i8k: unable to get SMM BIOS version
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
ppdev: user-space parallel port driver
-ACPI: AC Adapter [AC] (on-line)
-ACPI: Battery Slot [BAT0] (battery present)
-ACPI: Battery Slot [BAT1] (battery absent)
-ACPI: SSDT 3F682138, 0244 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
-Parsing all Control Methods:
-Table [SSDT](id 000C) - 6 Objects with 0 Devices 4 Methods 0 Regions
-ACPI: SSDT 3F681EED, 01C6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
-Parsing all Control Methods:
-Table [SSDT](id 000D) - 1 Objects with 0 Devices 1 Methods 0 Regions
-ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
-ACPI: Processor [CPU0] (supports 8 throttling states)
-ACPI: SSDT 3F68237C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
-Parsing all Control Methods:
-Table [SSDT](id 0011) - 4 Objects with 0 Devices 4 Methods 0 Regions
-ACPI: SSDT 3F6820B3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
-Parsing all Control Methods:
-Table [SSDT](id 0012) - 1 Objects with 0 Devices 1 Methods 0 Regions
-ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
-ACPI: Processor [CPU1] (supports 8 throttling states)
-ACPI: Thermal Zone [THM] (54 C)
-input: Lid Switch as /class/input/input2
-ACPI: Lid Switch [LID]
-input: Power Button (CM) as /class/input/input3
-ACPI: Power Button (CM) [PBTN]
-input: Sleep Button (CM) as /class/input/input4
-ACPI: Sleep Button (CM) [SBTN]
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
-input: PS/2 Mouse as /class/input/input5
-input: AlpsPS/2 ALPS GlidePoint as /class/input/input6
-Clocksource tsc unstable (delta = -148524127 ns)
-ndiswrapper (iw_set_wep:906): key 1 is not set
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
@@ -492,22 +482,15 @@
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
-NTFS driver 2.1.28 [Flags: R/O MODULE].
NTFS volume version 3.1.
PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100506, writing 100106)
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
-ip_tables: (C) 2000-2006 Netfilter Core Team
-Netfilter messages via NETLINK v0.30.
-nf_conntrack version 0.5.0 (8116 buckets, 64928 max)
so it would be fantastic if anyone has ANY ideas from this.. ? the biggest difference I notice is that with my previous kernel the E-IDE driver was apparently used? I'll try re-compiling I guess.
here I go answering my own question, and asking another.
what I did:
1. kernel
Code:
<M> ATA/ATAPI/MFM/RLL support --->
<M> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support
<M> Include IDE/ATA-2 DISK support [*] IDE ACPI support[*] PNP EIDE support[*] PCI IDE chipset support
<M> Generic PCI IDE Chipset Support[*] Generic PCI bus-master DMA support
SCSI device support --->
<*> SCSI disk support
<*> SCSI CDROM support
<*> SCSI generic support
<*> Serial ATA (prod) and Parallel ATA (experimental) drivers --->
<*> Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support
<M> Intel PATA MPIIX support
<M> Intel PATA old PIIX support
I'm not certain that the SCSI CD support is required built in, perhaps I'll try as a module later.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.
