LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 05-30-2013, 03:57 AM   #1
firedrake
Member
 
Registered: May 2013
Posts: 54

Rep: Reputation: Disabled
AlienWare NVIDIA GTX680M 3D Stereoscopic screen - boot hangs for 60 seconds


Hi,

I have a great laptop - Alienware M17X with GTX680M (games on this laptop are awesome) but I don't use Windows - I use linux. I have everything working right now but when I boot it takes about 2 minutes because boot process hangs in 3.5 second for 60 seconds. It's always the same moment and the same amount of time, so it's some loop going untill timeout and it's set to 60 seconds I think.
Do you know how can I overcome this slow boot. I would like to disable some USB device or sth like this to speed up boot process.

Check my dmesg, messages, etc.:

The most important part and the rest below:
Code:
[    3.529593] usb 2-1.8: Product: NVIDIA stereo controller
[    3.529854] usb 2-1.8: Manufacturer: Copyright (c) 2009 NVIDIA Corporation
[   62.560327] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   62.561097] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   62.563028] hda_intel: Disabling MSI
dmesg:
Code:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.4 (root@matsu) (gcc version 4.5.2 (GCC) ) #1 SMP PREEMPT Thu May 30 00:26:08 CEST 2013
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000995affff] usable
[    0.000000] BIOS-e820: [mem 0x00000000995b0000-0x000000009a9affff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009a9b0000-0x000000009f2befff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f2bf000-0x000000009f6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009f6bf000-0x000000009f7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009f7bf000-0x000000009f7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009f7ff000-0x000000009f7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f800000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Alienware M17xR4/M17xR4, BIOS A11 01/31/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 09F800000 mask FFF800000 uncachable
[    0.000000]   3 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask F80000000 write-back
[    0.000000]   6 base 25F000000 mask FFF000000 uncachable
[    0.000000]   7 base 260000000 mask FE0000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x023fffff]
[    0.000000] Base memory trampoline at [c008d000] 8d000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[    0.000000]  [mem 0x37200000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[    0.000000]  [mem 0x34000000-0x371fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x33ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[    0.000000]  [mem 0x37400000-0x375fdfff] page 4k
[    0.000000] BRK [0x01dfc000, 0x01dfcfff] PGTABLE
[    0.000000] BRK [0x01dfd000, 0x01dfffff] PGTABLE
[    0.000000] BRK [0x01e00000, 0x01e00fff] PGTABLE
[    0.000000] cma: CMA: reserved 16 MiB at 36400000
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 ALWARE)
[    0.000000] ACPI: XSDT 9f7fe210 000BC (v01 ALWARE ALIENWRE 00000001      01000013)
[    0.000000] ACPI: FACP 9f7fa000 0010C (v05 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: DSDT 9f7ec000 0A84A (v01 ALWARE ALIENWRE 00000000 ASL  00040000)
[    0.000000] ACPI: FACS 9f7b9000 00040
[    0.000000] ACPI: SLIC 9f7fd000 00176 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: UEFI 9f7fc000 00236 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: ASF! 9f7fb000 000A5 (v32 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: HPET 9f7f9000 00038 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: APIC 9f7f8000 0008C (v03 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: MCFG 9f7f7000 0003C (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: SLIC 9f7eb000 00176 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 9f7ea000 006FE (v01 INSYDE H2O BIOS 00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 9f7e8000 00028 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 9f7e7000 00406 (v01 INSYDE H2O BIOS 00001000 ACPI 00040000)
[    0.000000] ACPI: ASPT 9f7e6000 00034 (v07 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: DBGP 9f7e5000 00034 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: FPDT 9f7e3000 00044 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 9f7e2000 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20111123)
[    0.000000] ACPI: SSDT 9f7e1000 00A92 (v01  PmRef    CpuPm 00003000 INTL 20111123)
[    0.000000] ACPI: DMAR 9f7e0000 00080 (v01 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: SSDT 9f7dc000 02099 (v01 NvdPeg  NvPegTb 00001000 INTL 20111123)
[    0.000000] ACPI: WDTT 9f7df000 00224 (v02 ALWARE ALIENWRE 00000001 ASL  00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x25effffff]
[    0.000000]   NODE_DATA [mem 0x375fb000-0x375fcfff]
[    0.000000] 8826MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000] max_low_pfn = 375fe, highstart_pfn = 375fe
[    0.000000] Low memory ends at vaddr f75fe000
[    0.000000] High memory starts at vaddr f75fe000
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] Node: 0, start_pfn: 1, end_pfn: 91
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   1 
[    0.000000] Node: 0, start_pfn: 100, end_pfn: 995b0
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100 80100 84100 88100 8c100 90100 94100 98100 
[    0.000000] Node: 0, start_pfn: 9a9b0, end_pfn: 9f2bf
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   9a9b0 9e9b0 
[    0.000000] Node: 0, start_pfn: 9f7ff, end_pfn: 9f800
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   9f7ff 
[    0.000000] Node: 0, start_pfn: 100000, end_pfn: 25f000
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000 144000 148000 14c000 150000 154000 158000 15c000 160000 164000 168000 16c000 170000 174000 178000 17c000 180000 184000 188000 18c000 190000 194000 198000 19c000 1a0000 1a4000 1a8000 1ac000 1b0000 1b4000 1b8000 1bc000 1c0000 1c4000 1c8000 1cc000 1d0000 1d4000 1d8000 1dc000 1e0000 1e4000 1e8000 1ec000 1f0000 1f4000 1f8000 1fc000 200000 204000 208000 20c000 210000 214000 218000 21c000 220000 224000 228000 22c000 230000 234000 238000 23c000 240000 244000 248000 24c000 250000 254000 258000 25c000 
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x375fdfff]
[    0.000000]   HighMem  [mem 0x375fe000-0x5effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00090fff]
[    0.000000]   node   0: [mem 0x00100000-0x995affff]
[    0.000000]   node   0: [mem 0x9a9b0000-0x9f2befff]
[    0.000000]   node   0: [mem 0x9f7ff000-0x9f7fffff]
[    0.000000]   node   0: [mem 0x00000000-0x5effffff]
[    0.000000] On node 0 totalpages: 2084432
[    0.000000] free_area_init_node: node 0, pgdat f75fb000, node_mem_map f1820020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3984 pages, LIFO batch:0
[    0.000000]   Normal zone: 1740 pages used for memmap
[    0.000000]   Normal zone: 222718 pages, LIFO batch:31
[    0.000000]   HighMem zone: 17653 pages used for memmap
[    0.000000]   HighMem zone: 1857730 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[    0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f757f000 s31808 r0 d21440 u53248
[    0.000000] pcpu-alloc: s31808 r0 d21440 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2082660
[    0.000000] Policy zone: HighMem
[    0.000000] Kernel command line: auto BOOT_IMAGE=Slack-3.9.4 ro root=801 vt.default_utf8=1 raid=noautodetect
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 19890168 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000375fe:0025f000)
[    0.000000] Memory: 8208520k/9945088k available (8826k kernel code, 129208k reserved, 3955k data, 652k init, 7430920k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffab4000 - 0xfffff000   (5420 kB)
[    0.000000]     pkmap   : 0xff600000 - 0xff800000   (2048 kB)
[    0.000000]     vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
[    0.000000]       .init : 0xc1c7c000 - 0xc1d1f000   ( 652 kB)
[    0.000000]       .data : 0xc189eb79 - 0xc1c7ba00   (3955 kB)
[    0.000000]       .text : 0xc1000000 - 0xc189eb79   (8826 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f000a000 soft=f000c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 2793.632 MHz processor
[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.26 BogoMIPS (lpj=2793632)
[    0.000553] pid_max: default: 32768 minimum: 301
[    0.000840] Security Framework initialized
[    0.001112] SELinux:  Initializing.
[    0.001389] SELinux:  Starting in permissive mode
[    0.001400] Mount-cache hash table entries: 512
[    0.001817] Initializing cgroup subsys cpuacct
[    0.002078] Initializing cgroup subsys memory
[    0.002351] Initializing cgroup subsys freezer
[    0.002637] Initializing cgroup subsys blkio
[    0.002926] CPU: Physical Processor ID: 0
[    0.003196] CPU: Processor Core ID: 0
[    0.003469] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003469] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004598] mce: CPU supports 9 MCE banks
[    0.004878] CPU0: Thermal monitoring enabled (TM1)
[    0.005154] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.005154] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.005154] tlb_flushall_shift: 1
[    0.006023] Freeing SMP alternatives: 20k freed
[    0.006586] ACPI: Core revision 20130117
[    0.011785] ACPI: All ACPI Tables successfully acquired
[    0.025600] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.026298] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.036586] smpboot: CPU0: Intel(R) Core(TM) i7-3840QM CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
[    0.037213] TSC deadline timer enabled
[    0.037223] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[    0.037913] ... version:                3
[    0.038183] ... bit width:              48
[    0.038448] ... generic registers:      4
[    0.038719] ... value mask:             0000ffffffffffff
[    0.044280] ... max period:             000000007fffffff
[    0.044539] ... fixed-purpose events:   3
[    0.044796] ... event mask:             000000070000000f
[    0.054429] CPU 1 irqstacks, hard=f00d6000 soft=f00e0000
[    0.065154] Initializing CPU#1
[    0.054431] smpboot: Booting Node   0, Processors  #1
[    0.070679] CPU 2 irqstacks, hard=f00fa000 soft=f0108000
[    0.081662] Initializing CPU#2
[    0.071188]  #2
[    0.087179] CPU 3 irqstacks, hard=f0112000 soft=f0114000
[    0.098162] Initializing CPU#3
[    0.087689]  #3
[    0.103685] CPU 4 irqstacks, hard=f011e000 soft=f0128000
[    0.114669] Initializing CPU#4
[    0.104194]  #4
[    0.120289] CPU 5 irqstacks, hard=f0152000 soft=f0154000
[    0.131273] Initializing CPU#5
[    0.120799]  #5
[    0.136893] CPU 6 irqstacks, hard=f0166000 soft=f0178000
[    0.147876] Initializing CPU#6
[    0.137402]  #6
[    0.153493] CPU 7 irqstacks, hard=f0182000 soft=f0184000
[    0.154003]  #7 OK
[    0.164678] Initializing CPU#7
[    0.168208] Brought up 8 CPUs
[    0.168720] smpboot: Total of 8 processors activated (44698.11 BogoMIPS)
[    0.176821] devtmpfs: initialized
[    0.177284] EVM: security.selinux
[    0.177542] EVM: security.capability
[    0.177923] PM: Registering ACPI NVS region [mem 0x9f6bf000-0x9f7befff] (1048576 bytes)
[    0.178461] xor: automatically using best checksumming function:
[    0.187827]    avx       : 18456.000 MB/sec
[    0.188151] kworker/u:0 (44) used greatest stack depth: 7316 bytes left
[    0.188252] regulator-dummy: no parameters
[    0.188400] RTC time:  1:25:28, date: 05/30/13
[    0.188445] NET: Registered protocol family 16
[    0.189219] kworker/u:0 (45) used greatest stack depth: 6860 bytes left
[    0.189759] EISA bus registered
[    0.190129] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.190590] ACPI: bus type PCI registered
[    0.190974] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.191444] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.191708] PCI: Using MMCONFIG for extended config space
[    0.191968] PCI: Using configuration type 1 for base access
[    0.201725] bio: create slab <bio-0> at 0
[    0.218533] raid6: mmxx1     4742 MB/s
[    0.235573] raid6: mmxx2     5101 MB/s
[    0.252614] raid6: sse1x1    3925 MB/s
[    0.269660] raid6: sse1x2    4613 MB/s
[    0.286697] raid6: sse2x1    7953 MB/s
[    0.303737] raid6: sse2x2    9296 MB/s
[    0.303994] raid6: using algorithm sse2x2 (9296 MB/s)
[    0.304253] raid6: using ssse3x1 recovery algorithm
[    0.304700] ACPI: Added _OSI(Module Device)
[    0.304961] ACPI: Added _OSI(Processor Device)
[    0.305219] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.305478] ACPI: Added _OSI(Processor Aggregator Device)
[    0.307224] ACPI: EC: Look up EC in DSDT
[    0.308677] ACPI: Executed 1 blocks of module-level executable AML code
[    0.314437] ACPI: SSDT 9f5f9018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.315386] ACPI: Dynamic OEM Table Load:
[    0.315744] ACPI: SSDT   (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
[    0.319523] ACPI: SSDT 9f63ba98 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.320487] ACPI: Dynamic OEM Table Load:
[    0.320845] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
[    0.324527] ACPI: SSDT 9f5f8d98 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.325467] ACPI: Dynamic OEM Table Load:
[    0.325827] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
[    0.329434] ACPI: Interpreter enabled
[    0.329703] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[    0.330273] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[    0.330852] ACPI: (supports S0 S3 S4 S5)
[    0.331110] ACPI: Using IOAPIC for interrupt routing
[    0.331410] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.519170] ACPI: Power Resource [FN00] (off)
[    0.519516] ACPI: Power Resource [FN01] (off)
[    0.519871] ACPI: Power Resource [FN02] (off)
[    0.520211] ACPI: Power Resource [FN03] (off)
[    0.520557] ACPI: Power Resource [FN04] (off)
[    0.521405] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.521757] \_SB_.PCI0:_OSC invalid UUID
[    0.521758] _OSC request data:1 8 0 
[    0.522167] PCI host bridge to bus 0000:00
[    0.522426] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.522685] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.522952] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.523215] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.523477] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff]
[    0.523745] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.523840] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.523869] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.523899] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.524230] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.524254] pci 0000:00:14.0: reg 10: [mem 0xc2300000-0xc230ffff 64bit]
[    0.524325] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.524359] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.524668] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.524692] pci 0000:00:16.0: reg 10: [mem 0xc2314000-0xc231400f 64bit]
[    0.524768] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.524861] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.524883] pci 0000:00:1a.0: reg 10: [mem 0xc2319000-0xc23193ff]
[    0.524972] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.525006] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.525319] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.525336] pci 0000:00:1b.0: reg 10: [mem 0xc2310000-0xc2313fff 64bit]
[    0.525404] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.525429] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.525734] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.525813] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.525842] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.526147] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.526225] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.526255] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.526562] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.526641] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.526674] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.526989] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.527011] pci 0000:00:1d.0: reg 10: [mem 0xc2318000-0xc23183ff]
[    0.527100] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.527137] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.527442] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.527605] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.527624] pci 0000:00:1f.2: reg 10: [io  0x4048-0x404f]
[    0.527633] pci 0000:00:1f.2: reg 14: [io  0x4054-0x4057]
[    0.527640] pci 0000:00:1f.2: reg 18: [io  0x4040-0x4047]
[    0.527649] pci 0000:00:1f.2: reg 1c: [io  0x4050-0x4053]
[    0.527657] pci 0000:00:1f.2: reg 20: [io  0x4020-0x403f]
[    0.527665] pci 0000:00:1f.2: reg 24: [mem 0xc2317000-0xc23177ff]
[    0.527710] pci 0000:00:1f.2: PME# supported from D3hot
[    0.527779] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.527795] pci 0000:00:1f.3: reg 10: [mem 0xc2315000-0xc23150ff 64bit]
[    0.527815] pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
[    0.527946] pci 0000:01:00.0: [10de:11a0] type 00 class 0x030000
[    0.527955] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc0ffffff]
[    0.527965] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.527974] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[    0.527981] pci 0000:01:00.0: reg 24: [io  0x3000-0x307f]
[    0.527988] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    0.528073] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[    0.528082] pci 0000:01:00.1: reg 10: [mem 0xc1000000-0xc1003fff]
[    0.529558] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.529832] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.529835] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc1ffffff]
[    0.529838] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.529995] pci 0000:07:00.0: [1969:1083] type 00 class 0x020000
[    0.530090] pci 0000:07:00.0: reg 10: [mem 0xc2200000-0xc223ffff 64bit]
[    0.530139] pci 0000:07:00.0: reg 18: [io  0x2000-0x207f]
[    0.530598] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.530695] pci 0000:07:00.0: System wakeup disabled by ACPI
[    0.532603] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.532878] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.532884] pci 0000:00:1c.0:   bridge window [mem 0xc2200000-0xc22fffff]
[    0.533021] pci 0000:08:00.0: [8086:0887] type 00 class 0x028000
[    0.533068] pci 0000:08:00.0: reg 10: [mem 0xc2100000-0xc2101fff 64bit]
[    0.533295] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[    0.533340] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.535672] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.535950] pci 0000:00:1c.2:   bridge window [mem 0xc2100000-0xc21fffff]
[    0.536049] pci 0000:09:00.0: [10ec:5209] type 00 class 0xff0000
[    0.536071] pci 0000:09:00.0: reg 10: [mem 0xc2001000-0xc2001fff]
[    0.536228] pci 0000:09:00.0: supports D1 D2
[    0.536230] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
[    0.536261] pci 0000:09:00.0: System wakeup disabled by ACPI
[    0.536580] pci 0000:09:00.1: [10ec:5209] type 00 class 0x080500
[    0.536601] pci 0000:09:00.1: reg 10: [mem 0xc2000000-0xc20000ff]
[    0.536761] pci 0000:09:00.1: supports D1 D2
[    0.536763] pci 0000:09:00.1: PME# supported from D1 D2 D3hot
[    0.538666] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.538944] pci 0000:00:1c.3:   bridge window [mem 0xc2000000-0xc20fffff]
[    0.539007] \_SB_.PCI0:_OSC invalid UUID
[    0.539008] _OSC request data:1 1f 0 
[    0.539012] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.539475] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.600554] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.601723] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.602640] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.603554] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.604470] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.605686] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.606598] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.607514] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.608935] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.609300] acpi root: \_SB_.PCI0 notify handler is installed
[    0.609355] Found 1 acpi root devices

Last edited by firedrake; 05-30-2013 at 04:04 AM.
 
Old 05-30-2013, 04:00 AM   #2
firedrake
Member
 
Registered: May 2013
Posts: 54

Original Poster
Rep: Reputation: Disabled
The rest of my dmesg:
Code:
[    0.609380] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.609784] ACPI: No dock devices found.
[    0.610257] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.610723] vgaarb: loaded
[    0.610978] vgaarb: bridge control possible 0000:01:00.0
[    0.611928] SCSI subsystem initialized
[    0.612186] ACPI: bus type ATA registered
[    0.612517] libata version 3.00 loaded.
[    0.612600] ACPI: bus type USB registered
[    0.612904] usbcore: registered new interface driver usbfs
[    0.613186] usbcore: registered new interface driver hub
[    0.613480] usbcore: registered new device driver usb
[    0.613795] media: Linux media interface: v0.10
[    0.614076] Linux video capture interface: v2.00
[    0.614389] pps_core: LinuxPPS API ver. 1 registered
[    0.614647] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.615134] PTP clock support registered
[    0.615595] Advanced Linux Sound Architecture Driver Initialized.
[    0.615856] PCI: Using ACPI for IRQ routing
[    0.622313] PCI: pci_cache_line_size set to 64 bytes
[    0.622424] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[    0.622426] e820: reserve RAM buffer [mem 0x995b0000-0x9bffffff]
[    0.622428] e820: reserve RAM buffer [mem 0x9f2bf000-0x9fffffff]
[    0.622429] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[    0.622431] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.622567] NET: Registered protocol family 23
[    0.622835] Bluetooth: Core ver 2.16
[    0.623118] NET: Registered protocol family 31
[    0.623380] Bluetooth: HCI device and connection manager initialized
[    0.623641] Bluetooth: HCI socket layer initialized
[    0.623901] Bluetooth: L2CAP socket layer initialized
[    0.624164] Bluetooth: SCO socket layer initialized
[    0.624511] cfg80211: Calling CRDA to update world regulatory domain
[    0.624880] NetLabel: Initializing
[    0.625136] NetLabel:  domain hash size = 128
[    0.625394] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.625664] NetLabel:  unlabeled traffic allowed by default
[    0.626088] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.626813] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.629090] Switching to clocksource hpet
[    0.633411] FS-Cache: Loaded
[    0.633715] pnp: PnP ACPI init
[    0.633975] ACPI: bus type PNP registered
[    0.634250] pnp 00:00: [dma 4]
[    0.634293] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.634336] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.634441] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.634491] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.634550] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.634813] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.635073] system 00:04: [io  0xffff] has been reserved
[    0.635332] system 00:04: [io  0xffff] has been reserved
[    0.635608] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.635871] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.636131] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.636403] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.636665] system 00:04: [io  0xfd60-0xfd63] has been reserved
[    0.636925] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.636973] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.637035] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.637297] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.637358] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.637423] pnp 00:08: Plug and Play ACPI device, IDs DLL057b PNP0f13 (active)
[    0.697613] pnp 00:09: Plug and Play ACPI device, IDs SMO8810 (active)
[    0.697752] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.698014] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.698276] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.698555] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.698818] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.699080] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.699341] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.699617] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[    0.699879] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[    0.700140] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.700401] system 00:0a: [mem 0xc2400000-0xc2400fff] has been reserved
[    0.705806] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.706013] pnp: PnP ACPI: found 11 devices
[    0.706270] ACPI: bus type PNP unregistered
[    0.706546] PnPBIOS: Disabled by ACPI PNP
[    0.745468] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    0.745972] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[    0.746435] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.746702] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.746963] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc1ffffff]
[    0.747225] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.747695] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.747954] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.748218] pci 0000:00:1c.0:   bridge window [mem 0xc2200000-0xc22fffff]
[    0.748486] pci 0000:00:1c.2: PCI bridge to [bus 08]
[    0.748753] pci 0000:00:1c.2:   bridge window [mem 0xc2100000-0xc21fffff]
[    0.749022] pci 0000:00:1c.3: PCI bridge to [bus 09]
[    0.749284] pci 0000:00:1c.3:   bridge window [mem 0xc2000000-0xc20fffff]
[    0.749686] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.749688] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.749690] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.749691] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[    0.749693] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.749694] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc1ffffff]
[    0.749696] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[    0.749698] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.749699] pci_bus 0000:07: resource 1 [mem 0xc2200000-0xc22fffff]
[    0.749701] pci_bus 0000:08: resource 1 [mem 0xc2100000-0xc21fffff]
[    0.749702] pci_bus 0000:09: resource 1 [mem 0xc2000000-0xc20fffff]
[    0.749731] NET: Registered protocol family 2
[    0.750099] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.750384] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.750661] TCP: Hash tables configured (established 8192 bind 8192)
[    0.750930] TCP: reno registered
[    0.751187] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.751448] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.751760] NET: Registered protocol family 1
[    0.752070] RPC: Registered named UNIX socket transport module.
[    0.752330] RPC: Registered udp transport module.
[    0.752595] RPC: Registered tcp transport module.
[    0.752869] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.776652] pci 0000:01:00.0: Boot video device
[    0.776705] PCI: CLS 64 bytes, default 64
[    0.776744] dmar: Host address width 36
[    0.777002] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[    0.777266] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.777740] dmar: RMRR base: 0x0000009f68c000 end: 0x0000009f6abfff
[    0.778319] Simple Boot Flag at 0x44 set to 0x1
[    0.779719] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[    0.779985] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[    0.780248] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[    0.780514] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[    0.780801] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[    0.781068] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[    0.781337] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[    0.781621] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[    0.781933] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.782657] audit: initializing netlink socket (disabled)
[    0.782926] type=2000 audit(1369877128.739:1): initialized
[    0.783952] bounce pool size: 64 pages
[    0.784213] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.787681] VFS: Disk quotas dquot_6.5.2
[    0.788005] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.789593] NFS: Registering the id_resolver key type
[    0.789855] Key type id_resolver registered
[    0.790113] Key type id_legacy registered
[    0.790409] FS-Cache: Netfs 'cifs' registered for caching
[    0.790779] Key type cifs.spnego registered
[    0.791040] Key type cifs.idmap registered
[    0.791344] NTFS driver 2.1.30 [Flags: R/W].
[    0.791756] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.792109] fuse init (API version 7.21)
[    0.793052] Btrfs loaded
[    0.793311] msgmni has been set to 1550
[    0.793657] SELinux:  Registering netfilter hooks
[    0.794215] Key type asymmetric registered
[    0.794555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.795035] io scheduler noop registered
[    0.795292] io scheduler deadline registered
[    0.795606] io scheduler cfq registered (default)
[    0.796108] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.796365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.796740] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.797308] intel_idle: MWAIT substates: 0x21120
[    0.797309] intel_idle: v0.4 model 0x3A
[    0.797310] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.797408] ACPI: AC Adapter [ACAD] (on-line)
[    0.797818] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    0.798285] ACPI: Power Button [PWRB]
[    0.798599] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
[    0.799066] ACPI: Sleep Button [SLPB]
[    0.799385] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    0.799884] ACPI: Lid Switch [LID0]
[    0.800192] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.800678] ACPI: Power Button [PWRF]
[    0.801030] ACPI: Fan [FAN0] (off)
[    0.801330] ACPI: Fan [FAN1] (off)
[    0.801646] ACPI: Fan [FAN2] (off)
[    0.801948] ACPI: Fan [FAN3] (off)
[    0.802247] ACPI: Fan [FAN4] (off)
[    0.802552] [Firmware Bug]: ACPI(DGPU) defines _DOD but not _DOS
[    1.154195] ACPI Warning: _BQC returned an invalid level (20130117/video-486)
[    1.272292] acpi device:3e: registered as cooling_device5
[    1.617146] ACPI Warning: _BQC returned an invalid level (20130117/video-486)
[    1.735293] acpi device:43: registered as cooling_device6
[    1.735556] ACPI: Video Device [DGPU] (multi-head: yes  rom: no  post: no)
[    1.735897] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input4
[    1.736447] ACPI: Requesting acpi_cpufreq
[    1.781804] tsc: Refined TSC clocksource calibration: 2793.653 MHz
[    1.782067] Switching to clocksource tsc
[    1.804120] thermal LNXTHERM:00: registered as thermal_zone0
[    1.804381] ACPI: Thermal Zone [TZ00] (28 C)
[    1.804815] thermal LNXTHERM:01: registered as thermal_zone1
[    1.805080] ACPI: Thermal Zone [TZ01] (30 C)
[    1.805436] isapnp: Scanning for PnP cards...
[    2.006166] ACPI: Battery Slot [BAT1] (battery present)
[    2.163064] isapnp: No Plug & Play device found
[    2.181503] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.182247] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    2.182694] Non-volatile memory driver v1.3
[    2.183025] Linux agpgart interface v0.103
[    2.183438] [drm] Initialized drm 1.1.0 20060810
[    2.184632] loop: module loaded
[    2.184990] Guest personality initialized and is inactive
[    2.185294] VMCI host device registered (name=vmci, major=10, minor=59)
[    2.185557] Initialized host personality
[    2.186135] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[    2.186711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.187179] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[    2.187751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.188217] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[    2.188788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.189253] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.189549] Uniform Multi-Platform E-IDE driver
[    2.189928] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    2.190218] hv_vmbus: registering driver hv_storvsc
[    2.190596] ahci 0000:00:1f.2: version 3.0
[    2.190677] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    2.190702] ahci: SSS flag set, parallel bus scan disabled
[    2.201335] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl RAID mode
[    2.201799] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    2.202267] ahci 0000:00:1f.2: setting latency timer to 64
[    2.206979] scsi0 : ahci
[    2.207331] scsi1 : ahci
[    2.207667] scsi2 : ahci
[    2.208003] scsi3 : ahci
[    2.208341] scsi4 : ahci
[    2.208674] scsi5 : ahci
[    2.208993] ata1: SATA max UDMA/133 abar m2048@0xc2317000 port 0xc2317100 irq 41
[    2.209460] ata2: DUMMY
[    2.209715] ata3: SATA max UDMA/133 abar m2048@0xc2317000 port 0xc2317200 irq 41
[    2.210176] ata4: DUMMY
[    2.210438] ata5: SATA max UDMA/133 abar m2048@0xc2317000 port 0xc2317300 irq 41
[    2.210901] ata6: DUMMY
[    2.211631] libphy: Fixed MDIO Bus: probed
[    2.211913] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    2.212172] Copyright (c) 2007 Atheros Corporation.
[    2.236198] atl1c 0000:07:00.0: version 1.0.1.1-NAPI
[    2.236554] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.236815] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.237100] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    2.237365] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.237653] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
[    2.237912] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    2.238199] sky2: driver version 1.30
[    2.238608] PPP generic driver version 2.4.2
[    2.238928] NET: Registered protocol family 24
[    2.239189] I2O subsystem v1.325
[    2.239449] i2o: max drivers = 8
[    2.239799] I2O ProcFS OSM v1.316
[    2.240282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.240546] ehci-pci: EHCI PCI platform driver
[    2.240853] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    2.240857] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.241160] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.241637] ehci-pci 0000:00:1a.0: debug port 2
[    2.245901] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.245914] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2319000
[    2.251377] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.251652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.251913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.257471] usb usb1: Product: EHCI Host Controller
[    2.257730] usb usb1: Manufacturer: Linux 3.9.4 ehci_hcd
[    2.257990] usb usb1: SerialNumber: 0000:00:1a.0
[    2.258365] hub 1-0:1.0: USB hub found
[    2.258629] hub 1-0:1.0: 2 ports detected
[    2.258982] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    2.258985] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.259291] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.259766] ehci-pci 0000:00:1d.0: debug port 2
[    2.264051] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.264063] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2318000
[    2.269399] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.269668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.269930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.270391] usb usb2: Product: EHCI Host Controller
[    2.270653] usb usb2: Manufacturer: Linux 3.9.4 ehci_hcd
[    2.270913] usb usb2: SerialNumber: 0000:00:1d.0
[    2.271275] hub 2-0:1.0: USB hub found
[    2.271537] hub 2-0:1.0: 2 ports detected
[    2.271868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.272174] uhci_hcd: USB Universal Host Controller Interface driver
[    2.272467] Initializing USB Mass Storage driver...
[    2.272756] usbcore: registered new interface driver usb-storage
[    2.273017] USB Mass Storage support registered.
[    2.273335] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.321634] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.321909] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.322293] mousedev: PS/2 mouse device common for all mice
[    2.326439] rtc_cmos 00:05: RTC can wake from S4
[    2.326823] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    2.327109] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.327596] i2c /dev entries driver
[    2.327915] ACPI Warning: 0x00004000-0x0000401f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[    2.328491] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.329100] IR NEC protocol handler initialized
[    2.329358] IR RC5(x) protocol handler initialized
[    2.329618] IR RC6 protocol handler initialized
[    2.329875] IR JVC protocol handler initialized
[    2.330133] IR Sony protocol handler initialized
[    2.330390] IR RC5 (streamzap) protocol handler initialized
[    2.330652] IR SANYO protocol handler initialized
[    2.330910] IR MCE Keyboard/mouse protocol handler initialized
[    2.331377] md: linear personality registered for level -1
[    2.331639] md: raid1 personality registered for level 1
[    2.331944] device-mapper: uevent: version 1.0.3
[    2.332279] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    2.332774] EISA: Probing bus 0 at eisa.0
[    2.333032] EISA: Cannot allocate resource for mainboard
[    2.333456] cpuidle: using governor ladder
[    2.333907] cpuidle: using governor menu
[    2.334274] ledtrig-cpu: registered to indicate activity on CPUs
[    2.334539] EFI Variables Facility v0.08 2004-May-17
[    2.334882] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    2.335408] hidraw: raw HID events driver (C) Jiri Kosina
[    2.336000] usbcore: registered new interface driver usbhid
[    2.336259] usbhid: USB HID core driver
[    2.336710] ashmem: initialized
[    2.337142] goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO.
[    2.337608] goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16
[    2.338112] hv_utils: Registering HyperV Utility Driver
[    2.338371] hv_vmbus: registering driver hv_util
[    2.338632] hv_vmbus: registering driver hv_balloon
[    2.339394] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    2.378911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    2.515798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.522217] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.522984] ata1.00: ATA-8: ST9500423AS, 0006DEM1, max UDMA/133
[    2.523263] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.524896] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.525658] ata1.00: configured for UDMA/133
[    2.528020] scsi 0:0:0:0: Direct-Access     ATA      ST9500423AS      0006 PQ: 0 ANSI: 5
[    2.528997] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.529399] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.529733] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.530027] sd 0:0:0:0: [sda] Write Protect is off
[    2.530287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.530301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.560858] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.589220]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    2.590588] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.675414] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.675694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.676627] hub 1-1:1.0: USB hub found
[    2.677068] hub 1-1:1.0: 6 ports detected
[    2.780054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.834194] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.837200] ata3.00: ATAPI: HL-DT-STDVD+/-RW GA31N, A201, max UDMA/100
[    2.846196] ata3.00: configured for UDMA/100
[    2.860738] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GA31N    A201 PQ: 0 ANSI: 5
[    2.874721] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.875198] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.875979] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.876319] sr 2:0:0:0: Attached scsi generic sg1 type 5
 
Old 05-30-2013, 04:03 AM   #3
firedrake
Member
 
Registered: May 2013
Posts: 54

Original Poster
Rep: Reputation: Disabled
next part of dmesg:
Code:
[    2.894814] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.895092] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.895986] hub 2-1:1.0: USB hub found
[    2.896422] hub 2-1:1.0: 8 ports detected
[    2.960543] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[    3.036525] usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[    3.038111] usb 1-1.2: New USB device found, idVendor=187c, idProduct=0520
[    3.038400] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.038863] usb 1-1.2: Product: M17xR3
[    3.039120] usb 1-1.2: Manufacturer: Alienware Gaming
[    3.039381] usb 1-1.2: SerialNumber: 1.0.5
[    3.042171] hid-generic 0003:187C:0520.0001: hiddev0,hidraw0: USB HID v1.01 Device [Alienware Gaming M17xR3] on usb-0000:00:1a.0-1.2/input0
[    3.115717] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    3.181622] ata5: SATA link down (SStatus 0 SControl 300)
[    3.201645] usb 1-1.4: New USB device found, idVendor=064e, idProduct=8127
[    3.201912] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.202374] usb 1-1.4: Product: Laptop_Integrated_Webcam_FHD
[    3.202645] usb 1-1.4: Manufacturer: QCM
[    3.276920] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[    3.367853] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
[    3.368120] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.443124] usb 2-1.8: new high-speed USB device number 4 using ehci-pci
[    3.528839] usb 2-1.8: New USB device found, idVendor=0955, idProduct=7002
[    3.529129] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.529593] usb 2-1.8: Product: NVIDIA stereo controller
[    3.529854] usb 2-1.8: Manufacturer: Copyright (c) 2009 NVIDIA Corporation
[   62.560327] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   62.561097] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   62.563028] hda_intel: Disabling MSI
[   62.563296] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   62.717766] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[   62.718552] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[   62.720066] Netfilter messages via NETLINK v0.30.
[   62.720340] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   62.720817] ctnetlink v0.93: registering with nfnetlink.
[   62.721124] IPv4 over IPv4 tunneling driver
[   62.721713] ip_tables: (C) 2000-2006 Netfilter Core Team
[   62.721998] TCP: cubic registered
[   62.722253] Initializing XFRM netlink socket
[   62.722791] NET: Registered protocol family 10
[   62.723231] mip6: Mobile IPv6
[   62.723495] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   62.723912] sit: IPv6 over IPv4 tunneling driver
[   62.724544] ip6_gre: GRE over IPv6 tunneling driver
[   62.725065] NET: Registered protocol family 17
[   62.725367] Bluetooth: RFCOMM TTY layer initialized
[   62.725633] Bluetooth: RFCOMM socket layer initialized
[   62.725892] Bluetooth: RFCOMM ver 1.11
[   62.726149] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   62.726412] Bluetooth: BNEP filters: protocol multicast
[   62.726671] Bluetooth: BNEP socket layer initialized
[   62.726931] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   62.727190] Bluetooth: HIDP socket layer initialized
[   62.727537] Key type dns_resolver registered
[   62.728359] Using IPI No-Shortcut mode
[   62.728832] PM: Hibernation image not present or could not be loaded.
[   62.728835] registered taskstats version 1
[   62.729704] Key type encrypted registered
[   62.730110] IMA: No TPM chip found, activating TPM-bypass!
[   62.730829]   Magic number: 13:724:408
[   62.731163] console [netcon0] enabled
[   62.731425] netconsole: network logging started
[   62.731740] rtc_cmos 00:05: setting system clock to 2013-05-30 01:26:30 UTC (1369877190)
[   62.732991] ALSA device list:
[   62.738344]   #0: HDA Intel PCH at 0xc2310000 irq 42
[   62.738603]   #1: HDA NVidia at 0xc1000000 irq 17
[   62.738889] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[   62.775724] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[   62.776206] REISERFS (device sda1): using ordered data mode
[   62.776476] reiserfs: using flush barriers
[   62.779695] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   62.780526] REISERFS (device sda1): checking transaction log (sda1)
[   62.855270] REISERFS (device sda1): replayed 1 transactions in 0 seconds
[   63.035990] REISERFS (device sda1): Using r5 hash to sort names
[   63.049986] VFS: Mounted root (reiserfs filesystem) readonly on device 8:1.
[   63.060631] devtmpfs: mounted
[   63.061019] Freeing unused kernel memory: 652k freed
[   63.061459] Write protecting the kernel text: 8828k
[   63.061864] Write protecting the kernel read-only data: 3320k
[   63.062124] NX-protecting the kernel data: 5508k
[   63.866815] mount (2040) used greatest stack depth: 5640 bytes left
[   64.329145] cut (2055) used greatest stack depth: 5632 bytes left
[   64.745203] udevd (2061) used greatest stack depth: 5548 bytes left
[   64.745247] udev[2063]: starting version 165
[   65.591326] VBoxCreateUSBNo (2328) used greatest stack depth: 5532 bytes left
[   65.816377] rtsx_pci 0000:09:00.0: irq 43 for MSI/MSI-X
[   65.816393] rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 43
[   65.819490] mei 0000:00:16.0: setting latency timer to 64
[   65.819538] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[   65.837010] sdhci: Secure Digital Host Controller Interface driver
[   65.837287] sdhci: Copyright(c) Pierre Ossman
[   65.868651] sdhci-pci 0000:09:00.1: SDHCI controller found [10ec:5209] (rev 1)
[   65.869164] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   65.869641] mmc1: no vqmmc regulator found
[   65.869900] mmc1: no vmmc regulator found
[   65.870165] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   65.892252] mmc1: SDHCI controller on PCI [0000:09:00.1] using DMA
[   65.898403] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   65.925258] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   65.925528] Copyright(c) 2003-2013 Intel Corporation
[   65.926019] iwlwifi 0000:08:00.0: irq 45 for MSI/MSI-X
[   65.928439] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   65.958627] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   65.988565] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[   66.680418] wmi: Mapper loaded
[   67.026364] usbcore: registered new interface driver btusb
[   67.102686] xhci_hcd 0000:00:14.0: setting latency timer to 64
[   67.102691] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   67.103049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[   67.104586] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[   67.104629] xhci_hcd 0000:00:14.0: irq 46 for MSI/MSI-X
[   67.104677] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   67.104941] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   67.105402] usb usb3: Product: xHCI Host Controller
[   67.105658] usb usb3: Manufacturer: Linux 3.9.4 xhci_hcd
[   67.105919] usb usb3: SerialNumber: 0000:00:14.0
[   67.106246] xHCI xhci_add_endpoint called for root hub
[   67.106247] xHCI xhci_check_bandwidth called for root hub
[   67.106271] hub 3-0:1.0: USB hub found
[   67.106530] hub 3-0:1.0: 4 ports detected
[   67.107003] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   67.107284] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[   67.107765] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[   67.108023] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   67.108482] usb usb4: Product: xHCI Host Controller
[   67.108738] usb usb4: Manufacturer: Linux 3.9.4 xhci_hcd
[   67.108998] usb usb4: SerialNumber: 0000:00:14.0
[   67.109301] xHCI xhci_add_endpoint called for root hub
[   67.109302] xHCI xhci_check_bandwidth called for root hub
[   67.109318] hub 4-0:1.0: USB hub found
[   67.109577] hub 4-0:1.0: 4 ports detected
[   67.116914] modprobe (2078) used greatest stack depth: 5376 bytes left
[   67.129879] input: Dell WMI hotkeys as /devices/virtual/input/input10
[   67.227138] iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1
[   67.635125] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   67.635386] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   67.635650] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   67.635909] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[   67.636168] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_P2P enabled
[   67.636429] iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[   67.636938] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[   67.644895] iwlwifi 0000:08:00.0: RF_KILL bit toggled to enable radio.
[   67.654193] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   67.974606] udev-acl (2124) used greatest stack depth: 5340 bytes left
[   68.690291] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400, board id: 3655, fw id: 662324
[   68.753567] laptop_mode (2318) used greatest stack depth: 5280 bytes left
[   68.838028] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[   68.887877] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_FHD (064e:8127)
[   68.888917] uvcvideo: No streaming interface found for terminal 9.
[   68.889013] input: Laptop_Integrated_Webcam_FHD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
[   68.889799] usbcore: registered new interface driver uvcvideo
[   68.890060] USB Video Class driver (1.1.1)
[   71.794734] nvidia: module license 'NVIDIA' taints kernel.
[   71.794999] Disabling lock debugging due to kernel taint
[   71.800443] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   71.801298] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[   71.801777] NVRM: loading NVIDIA UNIX x86 Kernel Module  319.23  Thu May 16 19:04:19 PDT 2013
[   71.909727] Adding 2096476k swap on /dev/sda2.  Priority:-1 extents:1 across:2096476k 
[   73.036213] reiserfs: enabling write barrier flush mode
[   77.029773] find (3487) used greatest stack depth: 5188 bytes left
[   77.104858] ppdev: user-space parallel port driver
[   80.467088] REISERFS (device sda5): found reiserfs format "3.6" with standard journal
[   80.467586] REISERFS (device sda5): using ordered data mode
[   80.467847] reiserfs: using flush barriers
[   80.473499] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   80.474324] REISERFS (device sda5): checking transaction log (sda5)
[   80.569509] REISERFS (device sda5): Using r5 hash to sort names
[   80.609189] REISERFS (device sda6): found reiserfs format "3.6" with standard journal
[   80.609686] REISERFS (device sda6): using ordered data mode
[   80.609945] reiserfs: using flush barriers
[   80.614864] REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   80.615694] REISERFS (device sda6): checking transaction log (sda6)
[   80.674166] REISERFS (device sda6): Using r5 hash to sort names
[   88.889516] vboxdrv: Found 8 processor cores.
[   88.889829] vboxdrv: fAsync=0 offMin=0x25c offMax=0xf5a0
[   88.889902] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   88.889904] vboxdrv: Successfully loaded version 4.2.12 (interface 0x001a0004).
[   90.365173] dhclient (4024) used greatest stack depth: 4980 bytes left
[   90.410283] vboxpci: IOMMU not found (not registered)
[   90.695243] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[   90.702955] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[   91.054897] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[   91.062624] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[   91.242467] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   96.366993] atl1c 0000:07:00.0: irq 47 for MSI/MSI-X
[   96.381094] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  100.276565] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[  100.284276] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[  100.467946] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  100.585266] atl1c 0000:07:00.0: irq 47 for MSI/MSI-X
[  100.599404] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  100.638415] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[  100.646111] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[  100.830006] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  102.845518] wlan0: authenticate with d8:5d:4c:fa:29:97
[  102.851129] wlan0: send auth to d8:5d:4c:fa:29:97 (try 1/3)
[  102.852956] wlan0: deauthenticating from d8:5d:4c:fa:29:97 by local choice (reason=3)
[  102.858722] wlan0: authenticate with d8:5d:4c:fa:29:97
[  102.859810] wlan0: send auth to d8:5d:4c:fa:29:97 (try 1/3)
[  102.861230] wlan0: deauthenticating from d8:5d:4c:fa:29:97 by local choice (reason=3)
[  102.866319] wlan0: authenticate with d8:5d:4c:fa:29:97
[  102.867522] wlan0: send auth to d8:5d:4c:fa:29:97 (try 1/3)
[  102.867566] wlan0: authenticated
[  102.867642] iwlwifi 0000:08:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  102.867645] iwlwifi 0000:08:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  102.868087] wlan0: associate with d8:5d:4c:fa:29:97 (try 1/3)
[  102.872048] wlan0: RX AssocResp from d8:5d:4c:fa:29:97 (capab=0x401 status=0 aid=1)
[  102.874837] wlan0: associated
[  102.874855] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  115.393445] start_kdeinit (4260): /proc/4260/oom_adj is deprecated, please use /proc/4260/oom_score_adj instead.
[  124.826797] ata1.00: configured for UDMA/133
[  124.826804] ata1: EH complete
[  267.808609] ata1.00: configured for UDMA/133
[  267.808614] ata1: EH complete
[  268.144879] wlan0: deauthenticating from d8:5d:4c:fa:29:97 by local choice (reason=3)
[  268.150850] cfg80211: Calling CRDA to update world regulatory domain
[  268.172569] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[  268.180311] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[  268.195686] cfg80211: World regulatory domain updated:
[  268.195690] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  268.195692] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  268.195694] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  268.195695] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  268.195696] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  268.195698] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  268.373424] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  268.400724] atl1c 0000:07:00.0: irq 47 for MSI/MSI-X
[  268.415158] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  268.448692] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[  268.456425] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[  268.647586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  268.674646] atl1c 0000:07:00.0: irq 47 for MSI/MSI-X
[  268.688307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  270.087578] PM: Syncing filesystems ... done.
[  270.593749] PM: Preparing system for mem sleep
[  270.594178] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  270.605132] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[  270.616129] PM: Entering mem sleep
[  270.616178] Suspending console(s) (use no_console_suspend to debug)
[  270.622843] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  270.700185] sd 0:0:0:0: [sda] Stopping disk
[  270.784062] mei 0000:00:16.0: suspend
[  271.073776] PM: suspend of devices complete after 456.910 msecs
[  271.073952] PM: late suspend of devices complete after 0.174 msecs
[  271.084795] atl1c 0000:07:00.0: System wakeup enabled by ACPI
[  271.095695] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[  271.106789] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[  271.128644] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  271.139651] PM: noirq suspend of devices complete after 65.616 msecs
[  271.139889] ACPI: Preparing to enter system sleep state S3
[  271.140358] PM: Saving platform NVS memory
[  271.141006] Disabling non-boot CPUs ...
[  271.142534] smpboot: CPU 1 is now offline
[  271.144158] smpboot: CPU 2 is now offline
[  271.145493] smpboot: CPU 3 is now offline
[  271.147100] smpboot: CPU 4 is now offline
[  271.148425] smpboot: CPU 5 is now offline
[  271.149776] smpboot: CPU 6 is now offline
[  271.151186] smpboot: CPU 7 is now offline
[  271.152512] ACPI: Low-level resume complete
[  271.152554] PM: Restoring platform NVS memory
[  271.153013] Enabling non-boot CPUs ...
[  271.153058] smpboot: Booting Node 0 Processor 1 APIC 0x1
[  271.180569] Initializing CPU#1
[  271.183596] CPU1 is up
[  271.183613] smpboot: Booting Node 0 Processor 2 APIC 0x2
[  271.194024] Initializing CPU#2
[  271.197623] CPU2 is up
[  271.197638] smpboot: Booting Node 0 Processor 3 APIC 0x3
[  271.208050] Initializing CPU#3
[  271.211650] CPU3 is up
[  271.211664] smpboot: Booting Node 0 Processor 4 APIC 0x4
[  271.222076] Initializing CPU#4
[  271.225679] CPU4 is up
[  271.225695] smpboot: Booting Node 0 Processor 5 APIC 0x5
[  271.236107] Initializing CPU#5
[  271.239708] CPU5 is up
[  271.239722] smpboot: Booting Node 0 Processor 6 APIC 0x6
[  271.250135] Initializing CPU#6
[  271.253851] CPU6 is up
[  271.253864] smpboot: Booting Node 0 Processor 7 APIC 0x7
[  271.264277] Initializing CPU#7
[  271.267914] CPU7 is up
[  271.275566] ACPI: Waking up from system sleep state S3
[  271.296521] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  271.318534] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[  271.340563] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[  271.406724] PM: noirq resume of devices complete after 120.565 msecs
[  271.406847] PM: early resume of devices complete after 0.104 msecs
[  271.406885] xhci_hcd 0000:00:14.0: setting latency timer to 64
[  271.406944] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[  271.406946] ahci 0000:00:1f.2: setting latency timer to 64
[  271.406956] ehci-pci 0000:00:1a.0: setting latency timer to 64
[  271.406973] atl1c 0000:07:00.0: System wakeup disabled by ACPI
[  271.407154] iwlwifi 0000:08:00.0: RF_KILL bit toggled to enable radio.
[  271.407218] ehci-pci 0000:00:1d.0: setting latency timer to 64
[  271.407271] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[  271.407331] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[  271.407345] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[  271.412267] ------------[ cut here ]------------
[  271.412273] WARNING: at drivers/base/firmware_class.c:1031 _request_firmware+0x206/0x654()
[  271.412274] Hardware name: M17xR4
[  271.412291] Modules linked in: pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) ppdev parport_pc parport nvidia(PO) joydev uvcvideo videobuf2_core videobuf2_vmalloc iwldvm videobuf2_memops crc32c_intel aesni_intel mxm_wmi dell_wmi xhci_hcd btusb ablk_helper psmouse cryptd lrw wmi rtsx_pci_ms aes_i586 iwlwifi sdhci_pci rtsx_pci_sdmmc sdhci mei rtsx_pci xts serio_raw gf128mul mac_hid
[  271.412293] Pid: 43, comm: kworker/u:1 Tainted: P           O 3.9.4 #1
[  271.412294] Call Trace:
[  271.412299]  [<c1063979>] warn_slowpath_common+0x77/0x8e
[  271.412301]  [<c14b7e5a>] ? _request_firmware+0x206/0x654
[  271.412302]  [<c14b7e5a>] ? _request_firmware+0x206/0x654
[  271.412304]  [<c10639ad>] warn_slowpath_null+0x1d/0x1f
[  271.412306]  [<c14b7e5a>] _request_firmware+0x206/0x654
[  271.412308]  [<c14b8310>] request_firmware+0x1a/0x1c
[  271.412311]  [<c16c96d6>] ca0132_init+0x1a0/0xec2
[  271.412315]  [<c16b1b4e>] ? hda_set_power_state+0x9e/0xd7
[  271.412317]  [<c16b1c91>] hda_call_codec_resume+0x10a/0x149
[  271.412319]  [<c16d1fe1>] ? azx_init_chip+0x236/0x25d
[  271.412321]  [<c16b2093>] snd_hda_resume+0x17/0x2a
[  271.412323]  [<c16d2785>] azx_resume+0xbb/0xe9
[  271.412325]  [<c13b246d>] pci_pm_resume+0x53/0x63
[  271.412328]  [<c14b275a>] dpm_run_callback.clone.3+0x29/0x88
[  271.412330]  [<c13b241a>] ? pci_pm_thaw+0x53/0x53
[  271.412332]  [<c14b2bbe>] device_resume+0xd0/0x103
[  271.412334]  [<c14b2c0a>] async_resume+0x19/0x3d
[  271.412337]  [<c1089305>] ? try_to_wake_up+0x16d/0x177
[  271.412340]  [<c1081b85>] async_run_entry_fn+0x69/0x128
[  271.412342]  [<c1078390>] process_one_work+0x152/0x24f
[  271.412344]  [<c10799e1>] ? manage_workers+0x1e0/0x1ea
[  271.412345]  [<c1083000>] ? preempt_notifier_unregister+0x13/0x20
[  271.412347]  [<c1079af6>] worker_thread+0x10b/0x195
[  271.412349]  [<c107cde2>] kthread+0x6b/0x70
[  271.412351]  [<c10799eb>] ? manage_workers+0x1ea/0x1ea
[  271.412354]  [<c189c677>] ret_from_kernel_thread+0x1b/0x28
[  271.412356]  [<c107cd77>] ? kthread_freezable_should_stop+0x31/0x31
[  271.412358] ---[ end trace 724f96903843cf1d ]---
[  271.412359] snd_hda_intel 0000:00:1b.0: firmware: ctefx.bin will not be loaded
[  271.430025] atl1c 0000:07:00.0: irq 47 for MSI/MSI-X
[  271.608602] dpm_run_callback(): pnp_bus_resume+0x0/0x59 returns -19
[  271.608604] PM: Device 00:07 failed to resume: error -19
[  271.619907] usb 2-1.8: reset high-speed USB device number 4 using ehci-pci
[  271.714973] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  271.716966] ata5: SATA link down (SStatus 0 SControl 300)
[  271.724639] ata3.00: configured for UDMA/100
[  271.778108] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
[  271.865834] btusb 2-1.5:1.0: no reset_resume for driver btusb?
[  271.865835] btusb 2-1.5:1.1: no reset_resume for driver btusb?
[  271.936301] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
[  274.318260] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  274.319541] ata1.00: ACPI cmd ef/5a:00:00:00:00:a0 (SET FEATURES) succeeded
[  274.321708] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[  274.321950] ata1.00: configured for UDMA/133
[  274.335705] sd 0:0:0:0: [sda] Starting disk
[  274.362552] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[  274.370196] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[  274.563375] PM: resume of devices complete after 3152.612 msecs
[  274.574759] PM: Finishing wakeup.
[  274.574760] Restarting tasks ... done.
[  274.576354] video LNXVIDEO:00: Restoring backlight state
[  274.686185] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[  274.715825] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[  274.745921] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[  274.777138] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[  275.158289] xhci_hcd 0000:00:14.0: setting latency timer to 64
[  277.231136] ata1.00: configured for UDMA/133
[  277.231146] ata1: EH complete
[  277.456845] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[  277.464537] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[  277.659171] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  277.699062] atl1c 0000:07:00.0: irq 47 for MSI/MSI-X
[  277.712628] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  277.747836] iwlwifi 0000:08:00.0: L1 Enabled; Disabling L0S
[  277.755528] iwlwifi 0000:08:00.0: Radio type=0x2-0x0-0x0
[  277.952436] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  279.978960] wlan0: authenticate with d8:5d:4c:fa:29:97
[  279.983077] wlan0: send auth to d8:5d:4c:fa:29:97 (try 1/3)
[  279.985395] wlan0: authenticated
[  279.985441] iwlwifi 0000:08:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[  279.985448] iwlwifi 0000:08:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[  279.986254] wlan0: associate with d8:5d:4c:fa:29:97 (try 1/3)
[  279.988389] wlan0: RX AssocResp from d8:5d:4c:fa:29:97 (capab=0x401 status=0 aid=1)
[  279.991052] wlan0: associated
[  279.991088] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5929.156495] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 5929.168919] usb 3-2: New USB device found, idVendor=cd12, idProduct=ef18
[ 5929.168928] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5929.168932] usb 3-2: Product: DISK            
[ 5929.168936] usb 3-2: Manufacturer: USB     
[ 5929.168939] usb 3-2: SerialNumber: BDC4A7C2098B8845
[ 5929.172213] scsi6 : usb-storage 3-2:1.0
[ 5930.175357] scsi 6:0:0:0: Direct-Access     USB      DISK             V1.0 PQ: 0 ANSI: 2
[ 5930.175882] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5930.176429] sd 6:0:0:0: [sdb] 8202240 512-byte logical blocks: (4.19 GB/3.91 GiB)
[ 5930.176755] sd 6:0:0:0: [sdb] Write Protect is off
[ 5930.176764] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 5930.177034] sd 6:0:0:0: [sdb] No Caching mode page present
[ 5930.177043] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5930.180332] sd 6:0:0:0: [sdb] No Caching mode page present
[ 5930.180341] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5930.181011]  sdb: sdb1
[ 5930.183071] sd 6:0:0:0: [sdb] No Caching mode page present
[ 5930.183075] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 5930.183077] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 5930.369210] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
 
Old 05-30-2013, 04:09 AM   #4
firedrake
Member
 
Registered: May 2013
Posts: 54

Original Poster
Rep: Reputation: Disabled
syslog:

Code:
May 30 01:26:49 matsu kernel: [    0.188151] kworker/u:0 (44) used greatest stack depth: 7316 bytes left
May 30 01:26:49 matsu kernel: [    0.189219] kworker/u:0 (45) used greatest stack depth: 6860 bytes left
May 30 01:26:49 matsu kernel: [    0.218533] raid6: mmxx1     4742 MB/s
May 30 01:26:49 matsu kernel: [    0.235573] raid6: mmxx2     5101 MB/s
May 30 01:26:49 matsu kernel: [    0.252614] raid6: sse1x1    3925 MB/s
May 30 01:26:49 matsu kernel: [    0.269660] raid6: sse1x2    4613 MB/s
May 30 01:26:49 matsu kernel: [    0.286697] raid6: sse2x1    7953 MB/s
May 30 01:26:49 matsu kernel: [    0.303737] raid6: sse2x2    9296 MB/s
May 30 01:26:49 matsu kernel: [    0.303994] raid6: using algorithm sse2x2 (9296 MB/s)
May 30 01:26:49 matsu kernel: [    0.304253] raid6: using ssse3x1 recovery algorithm
May 30 01:26:49 matsu kernel: [    0.308677] ACPI: Executed 1 blocks of module-level executable AML code
May 30 01:26:49 matsu kernel: [    0.314437] ACPI: SSDT 9f5f9018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
May 30 01:26:49 matsu kernel: [    0.315386] ACPI: Dynamic OEM Table Load:
May 30 01:26:49 matsu kernel: [    0.315744] ACPI: SSDT   (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20111123)
May 30 01:26:49 matsu kernel: [    0.319523] ACPI: SSDT 9f63ba98 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
May 30 01:26:49 matsu kernel: [    0.320487] ACPI: Dynamic OEM Table Load:
May 30 01:26:49 matsu kernel: [    0.320845] ACPI: SSDT   (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20111123)
May 30 01:26:49 matsu kernel: [    0.324527] ACPI: SSDT 9f5f8d98 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
May 30 01:26:49 matsu kernel: [    0.325467] ACPI: Dynamic OEM Table Load:
May 30 01:26:49 matsu kernel: [    0.325827] ACPI: SSDT   (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20111123)
May 30 01:26:49 matsu kernel: [    0.329703] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
May 30 01:26:49 matsu kernel: [    0.330273] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
May 30 01:26:49 matsu kernel: [    0.608935] ACPI: Enabled 7 GPEs in block 00 to 3F
May 30 01:26:49 matsu kernel: [    0.783952] bounce pool size: 64 pages
May 30 01:26:49 matsu kernel: [    0.788005] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
May 30 01:26:49 matsu kernel: [    0.802552] [Firmware Bug]: ACPI(DGPU) defines _DOD but not _DOS
May 30 01:26:49 matsu kernel: [    1.154195] ACPI Warning: _BQC returned an invalid level (20130117/video-486)
May 30 01:26:49 matsu kernel: [    1.617146] ACPI Warning: _BQC returned an invalid level (20130117/video-486)
May 30 01:26:49 matsu kernel: [    2.186135] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
May 30 01:26:49 matsu kernel: [    2.187179] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
May 30 01:26:49 matsu kernel: [    2.188217] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
May 30 01:26:49 matsu kernel: [    2.189253] lpc_ich: Resource conflict(s) found affecting gpio_ich
May 30 01:26:49 matsu kernel: [    2.189928] GDT-HA: Storage RAID Controller Driver. Version: 3.05
May 30 01:26:49 matsu kernel: [    2.327915] ACPI Warning: 0x00004000-0x0000401f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
May 30 01:26:49 matsu kernel: [    2.333032] EISA: Cannot allocate resource for mainboard
May 30 01:26:49 matsu kernel: [    2.337142] goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO.
May 30 01:26:49 matsu kernel: [    2.337608] goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16
May 30 01:26:49 matsu kernel: [    2.874721] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
May 30 01:26:49 matsu kernel: [    3.036525] usb 1-1.2: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
May 30 01:26:49 matsu kernel: [   62.776476] reiserfs: using flush barriers
May 30 01:26:49 matsu kernel: [   63.866815] mount (2040) used greatest stack depth: 5640 bytes left
May 30 01:26:49 matsu kernel: [   64.329145] cut (2055) used greatest stack depth: 5632 bytes left
May 30 01:26:49 matsu kernel: [   64.745203] udevd (2061) used greatest stack depth: 5548 bytes left
May 30 01:26:49 matsu kernel: [   65.591326] VBoxCreateUSBNo (2328) used greatest stack depth: 5532 bytes left
May 30 01:26:49 matsu kernel: [   65.869164] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
May 30 01:26:49 matsu kernel: [   65.870165] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
May 30 01:26:49 matsu kernel: [   65.898403] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
May 30 01:26:49 matsu kernel: [   65.928439] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
May 30 01:26:49 matsu kernel: [   65.958627] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
May 30 01:26:49 matsu kernel: [   65.988565] sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
May 30 01:26:49 matsu kernel: [   67.116914] modprobe (2078) used greatest stack depth: 5376 bytes left
May 30 01:26:49 matsu kernel: [   67.644895] iwlwifi 0000:08:00.0: RF_KILL bit toggled to enable radio.
May 30 01:26:49 matsu kernel: [   67.974606] udev-acl (2124) used greatest stack depth: 5340 bytes left
May 30 01:26:49 matsu kernel: [   68.753567] laptop_mode (2318) used greatest stack depth: 5280 bytes left
May 30 01:26:49 matsu kernel: [   71.794734] nvidia: module license 'NVIDIA' taints kernel.
May 30 01:26:49 matsu kernel: [   71.794999] Disabling lock debugging due to kernel taint
May 30 01:26:49 matsu kernel: [   71.801777] NVRM: loading NVIDIA UNIX x86 Kernel Module  319.23  Thu May 16 19:04:19 PDT 2013
May 30 01:26:49 matsu kernel: [   73.036213] reiserfs: enabling write barrier flush mode
May 30 01:26:49 matsu kernel: [   77.029773] find (3487) used greatest stack depth: 5188 bytes left
May 30 01:26:49 matsu kernel: [   80.467847] reiserfs: using flush barriers
May 30 01:26:49 matsu kernel: [   80.609945] reiserfs: using flush barriers
May 30 01:26:51 matsu console-kit-daemon[3755]: WARNING: Failed to acquire org.freedesktop.ConsoleKit 
May 30 01:26:51 matsu console-kit-daemon[3755]: WARNING: Could not acquire name; bailing out 
May 30 01:26:56 matsu kernel: [   88.889829] vboxdrv: fAsync=0 offMin=0x25c offMax=0xf5a0
May 30 01:26:58 matsu kernel: [   90.365173] dhclient (4024) used greatest stack depth: 4980 bytes left
 
Old 05-30-2013, 04:13 AM   #5
firedrake
Member
 
Registered: May 2013
Posts: 54

Original Poster
Rep: Reputation: Disabled
messages

Code:
May 30 01:26:49 matsu kernel: [    2.876319] sr 2:0:0:0: Attached scsi generic sg1 type 5
May 30 01:26:49 matsu kernel: [    2.894814] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
May 30 01:26:49 matsu kernel: [    2.895092] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 30 01:26:49 matsu kernel: [    2.895986] hub 2-1:1.0: USB hub found
May 30 01:26:49 matsu kernel: [    2.896422] hub 2-1:1.0: 8 ports detected
May 30 01:26:49 matsu kernel: [    2.960543] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
May 30 01:26:49 matsu kernel: [    3.038111] usb 1-1.2: New USB device found, idVendor=187c, idProduct=0520
May 30 01:26:49 matsu kernel: [    3.038400] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 30 01:26:49 matsu kernel: [    3.038863] usb 1-1.2: Product: M17xR3
May 30 01:26:49 matsu kernel: [    3.039120] usb 1-1.2: Manufacturer: Alienware Gaming
May 30 01:26:49 matsu kernel: [    3.039381] usb 1-1.2: SerialNumber: 1.0.5
May 30 01:26:49 matsu kernel: [    3.042171] hid-generic 0003:187C:0520.0001: hiddev0,hidraw0: USB HID v1.01 Device [Alienware Gaming M17xR3] on usb-0000:00:1a.0-1.2/input0
May 30 01:26:49 matsu kernel: [    3.115717] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
May 30 01:26:49 matsu kernel: [    3.181622] ata5: SATA link down (SStatus 0 SControl 300)
May 30 01:26:49 matsu kernel: [    3.201645] usb 1-1.4: New USB device found, idVendor=064e, idProduct=8127
May 30 01:26:49 matsu kernel: [    3.201912] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 30 01:26:49 matsu kernel: [    3.202374] usb 1-1.4: Product: Laptop_Integrated_Webcam_FHD
May 30 01:26:49 matsu kernel: [    3.202645] usb 1-1.4: Manufacturer: QCM
May 30 01:26:49 matsu kernel: [    3.276920] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
May 30 01:26:49 matsu kernel: [    3.367853] usb 2-1.5: New USB device found, idVendor=8087, idProduct=07da
May 30 01:26:49 matsu kernel: [    3.368120] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
May 30 01:26:49 matsu kernel: [    3.443124] usb 2-1.8: new high-speed USB device number 4 using ehci-pci
May 30 01:26:49 matsu kernel: [    3.528839] usb 2-1.8: New USB device found, idVendor=0955, idProduct=7002
May 30 01:26:49 matsu kernel: [    3.529129] usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
May 30 01:26:49 matsu kernel: [    3.529593] usb 2-1.8: Product: NVIDIA stereo controller
May 30 01:26:49 matsu kernel: [    3.529854] usb 2-1.8: Manufacturer: Copyright (c) 2009 NVIDIA Corporation
May 30 01:26:49 matsu kernel: [   62.560327] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
May 30 01:26:49 matsu kernel: [   62.561097] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
May 30 01:26:49 matsu kernel: [   62.563028] hda_intel: Disabling MSI
May 30 01:26:49 matsu kernel: [   62.563296] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
May 30 01:26:49 matsu kernel: [   62.717766] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
May 30 01:26:49 matsu kernel: [   62.718552] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
May 30 01:26:49 matsu kernel: [   62.720066] Netfilter messages via NETLINK v0.30.
May 30 01:26:49 matsu kernel: [   62.720340] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
May 30 01:26:49 matsu kernel: [   62.720817] ctnetlink v0.93: registering with nfnetlink.
May 30 01:26:49 matsu kernel: [   62.721124] IPv4 over IPv4 tunneling driver
May 30 01:26:49 matsu kernel: [   62.721713] ip_tables: (C) 2000-2006 Netfilter Core Team
May 30 01:26:49 matsu kernel: [   62.721998] TCP: cubic registered
May 30 01:26:49 matsu kernel: [   62.722253] Initializing XFRM netlink socket
May 30 01:26:49 matsu kernel: [   62.722791] NET: Registered protocol family 10
May 30 01:26:49 matsu kernel: [   62.723231] mip6: Mobile IPv6
May 30 01:26:49 matsu kernel: [   62.723495] ip6_tables: (C) 2000-2006 Netfilter Core Team
May 30 01:26:49 matsu kernel: [   62.723912] sit: IPv6 over IPv4 tunneling driver
May 30 01:26:49 matsu kernel: [   62.724544] ip6_gre: GRE over IPv6 tunneling driver
May 30 01:26:49 matsu kernel: [   62.725065] NET: Registered protocol family 17
May 30 01:26:49 matsu kernel: [   62.725367] Bluetooth: RFCOMM TTY layer initialized
May 30 01:26:49 matsu kernel: [   62.725633] Bluetooth: RFCOMM socket layer initialized
May 30 01:26:49 matsu kernel: [   62.725892] Bluetooth: RFCOMM ver 1.11
May 30 01:26:49 matsu kernel: [   62.726149] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
May 30 01:26:49 matsu kernel: [   62.726412] Bluetooth: BNEP filters: protocol multicast
May 30 01:26:49 matsu kernel: [   62.726671] Bluetooth: BNEP socket layer initialized
May 30 01:26:49 matsu kernel: [   62.726931] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
May 30 01:26:49 matsu kernel: [   62.727190] Bluetooth: HIDP socket layer initialized
May 30 01:26:49 matsu kernel: [   62.727537] Key type dns_resolver registered
May 30 01:26:49 matsu kernel: [   62.728359] Using IPI No-Shortcut mode
May 30 01:26:49 matsu kernel: [   62.728835] registered taskstats version 1
May 30 01:26:49 matsu kernel: [   62.729704] Key type encrypted registered
 
Old 05-30-2013, 09:24 AM   #6
allend
Senior Member
 
Registered: Oct 2003
Location: Melbourne
Distribution: Slackware-current
Posts: 3,432

Rep: Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849
I suspect that 'lspci' on your Alienware M17X will show:
Quote:
0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
and that this is causing the stall during boot.

That device needs additional work to be properly installed in Slackware. e.g.
http://www.linuxquestions.org/questi...13-4175431589/
http://www.linuxquestions.org/questi...on-4175451196/
 
Old 05-30-2013, 06:29 PM   #7
firedrake
Member
 
Registered: May 2013
Posts: 54

Original Poster
Rep: Reputation: Disabled
This is my lspci:

Code:
00:00.0 Host bridge: Intel Corporation Device 0154 (rev 09)
00:01.0 PCI bridge: Intel Corporation Device 0151 (rev 09)
00:14.0 USB Controller: Intel Corporation Device 1e31 (rev 04)
00:16.0 Communication controller: Intel Corporation Device 1e3a (rev 04)
00:1a.0 USB Controller: Intel Corporation Device 1e2d (rev 04)
00:1b.0 Audio device: Intel Corporation Device 1e20 (rev 04)
00:1c.0 PCI bridge: Intel Corporation Device 1e10 (rev c4)
00:1c.2 PCI bridge: Intel Corporation Device 1e14 (rev c4)
00:1c.3 PCI bridge: Intel Corporation Device 1e16 (rev c4)
00:1d.0 USB Controller: Intel Corporation Device 1e26 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Device 1e57 (rev 04)
00:1f.2 RAID bus controller: Intel Corporation Mobile 82801 SATA RAID Controller (rev 04)
00:1f.3 SMBus: Intel Corporation Device 1e22 (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation Device 11a0 (rev a1)
01:00.1 Audio device: nVidia Corporation Device 0e0a (rev a1)
07:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)
08:00.0 Network controller: Intel Corporation Device 0887 (rev c4)
09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
09:00.1 SD Host controller: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01)
Quote:
Originally Posted by allend View Post
I suspect that 'lspci' on your Alienware M17X will show:

and that this is causing the stall during boot.

That device needs additional work to be properly installed in Slackware. e.g.
http://www.linuxquestions.org/questi...13-4175431589/
http://www.linuxquestions.org/questi...on-4175451196/
 
Old 05-30-2013, 06:53 PM   #8
allend
Senior Member
 
Registered: Oct 2003
Location: Melbourne
Distribution: Slackware-current
Posts: 3,432

Rep: Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849Reputation: 849
OK- No Broadcom device present.
Have you tried booting using the nomsi kernel boot parameter?
 
Old 05-30-2013, 07:49 PM   #9
kingbeowulf
Member
 
Registered: Oct 2003
Location: WA
Distribution: Slackware64 14.1, Slackware 14.1
Posts: 519

Rep: Reputation: 137Reputation: 137
Actually, you might try blacklisting 'hda-intel' to see if the hang goes away. Also, dmesg is a bit non-sequestial, so see if its trying to load 'intel' or 'intelhd' (check your BIOS and lsmod). You also have a kernel segfault. Also, since you are fiddling with 3.9.4, some of us don't have that kind of time and it wold help use to troubleshoot if you ran the stock kernel.

Also, what version of Nvidia driver? NVDIA*.sh or from SBo?
 
1 members found this post helpful.
Old 05-31-2013, 07:41 AM   #10
firedrake
Member
 
Registered: May 2013
Posts: 54

Original Poster
Rep: Reputation: Disabled
Thanks kingbeowulf - your post helped me to figure it out - there was a problem with snd-hda-intel and scanning ports or sth like this. I had snd-hda-intel compiled into my kernel so when I changed this to (M)odule it helped me to overcome this problem.

Sometimes it's not good to put everything into your Kernel.

Now if someone could help me with the second laptop I would be in debt to him.
http://www.linuxquestions.org/questi...ow-4175464057/

Kind regards,
Maciej

Quote:
Originally Posted by kingbeowulf View Post
Actually, you might try blacklisting 'hda-intel' to see if the hang goes away. Also, dmesg is a bit non-sequestial, so see if its trying to load 'intel' or 'intelhd' (check your BIOS and lsmod). You also have a kernel segfault. Also, since you are fiddling with 3.9.4, some of us don't have that kind of time and it wold help use to troubleshoot if you ran the stock kernel.

Also, what version of Nvidia driver? NVDIA*.sh or from SBo?
 
  


Reply

Tags
alienware, nvidia, stereo


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
x hangs at nvidia splash screen in RHEL5 wjdoss Linux - Server 3 09-11-2009 12:33 PM
NVIDIA 7174 driver hangs at spalsh screen cleidh_mor Linux - Hardware 3 04-28-2005 01:28 PM
hangs on NVIDIA screen sheridansellers Mandriva 1 12-16-2004 11:01 AM
X server hangs on nvidia splash screen Rnd227 Mandriva 3 11-23-2004 06:14 AM
FC2 - NVIDIA splash screen hangs after install. bamn04 Fedora 1 11-15-2004 01:32 AM


All times are GMT -5. The time now is 04:50 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration