firedrake |
05-30-2013 04:00 AM |
The rest of my dmesg:
Code:
[ 0.609380] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.609784] ACPI: No dock devices found.
[ 0.610257] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.610723] vgaarb: loaded
[ 0.610978] vgaarb: bridge control possible 0000:01:00.0
[ 0.611928] SCSI subsystem initialized
[ 0.612186] ACPI: bus type ATA registered
[ 0.612517] libata version 3.00 loaded.
[ 0.612600] ACPI: bus type USB registered
[ 0.612904] usbcore: registered new interface driver usbfs
[ 0.613186] usbcore: registered new interface driver hub
[ 0.613480] usbcore: registered new device driver usb
[ 0.613795] media: Linux media interface: v0.10
[ 0.614076] Linux video capture interface: v2.00
[ 0.614389] pps_core: LinuxPPS API ver. 1 registered
[ 0.614647] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.615134] PTP clock support registered
[ 0.615595] Advanced Linux Sound Architecture Driver Initialized.
[ 0.615856] PCI: Using ACPI for IRQ routing
[ 0.622313] PCI: pci_cache_line_size set to 64 bytes
[ 0.622424] e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
[ 0.622426] e820: reserve RAM buffer [mem 0x995b0000-0x9bffffff]
[ 0.622428] e820: reserve RAM buffer [mem 0x9f2bf000-0x9fffffff]
[ 0.622429] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 0.622431] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[ 0.622567] NET: Registered protocol family 23
[ 0.622835] Bluetooth: Core ver 2.16
[ 0.623118] NET: Registered protocol family 31
[ 0.623380] Bluetooth: HCI device and connection manager initialized
[ 0.623641] Bluetooth: HCI socket layer initialized
[ 0.623901] Bluetooth: L2CAP socket layer initialized
[ 0.624164] Bluetooth: SCO socket layer initialized
[ 0.624511] cfg80211: Calling CRDA to update world regulatory domain
[ 0.624880] NetLabel: Initializing
[ 0.625136] NetLabel: domain hash size = 128
[ 0.625394] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.625664] NetLabel: unlabeled traffic allowed by default
[ 0.626088] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.626813] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.629090] Switching to clocksource hpet
[ 0.633411] FS-Cache: Loaded
[ 0.633715] pnp: PnP ACPI init
[ 0.633975] ACPI: bus type PNP registered
[ 0.634250] pnp 00:00: [dma 4]
[ 0.634293] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.634336] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.634441] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.634491] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.634550] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.634813] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.635073] system 00:04: [io 0xffff] has been reserved
[ 0.635332] system 00:04: [io 0xffff] has been reserved
[ 0.635608] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.635871] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.636131] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.636403] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.636665] system 00:04: [io 0xfd60-0xfd63] has been reserved
[ 0.636925] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.636973] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.637035] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.637297] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.637358] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.637423] pnp 00:08: Plug and Play ACPI device, IDs DLL057b PNP0f13 (active)
[ 0.697613] pnp 00:09: Plug and Play ACPI device, IDs SMO8810 (active)
[ 0.697752] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.698014] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.698276] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.698555] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.698818] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.699080] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.699341] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.699617] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.699879] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.700140] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.700401] system 00:0a: [mem 0xc2400000-0xc2400fff] has been reserved
[ 0.705806] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.706013] pnp: PnP ACPI: found 11 devices
[ 0.706270] ACPI: bus type PNP unregistered
[ 0.706546] PnPBIOS: Disabled by ACPI PNP
[ 0.745468] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.745972] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.746435] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.746702] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.746963] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc1ffffff]
[ 0.747225] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.747695] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.747954] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.748218] pci 0000:00:1c.0: bridge window [mem 0xc2200000-0xc22fffff]
[ 0.748486] pci 0000:00:1c.2: PCI bridge to [bus 08]
[ 0.748753] pci 0000:00:1c.2: bridge window [mem 0xc2100000-0xc21fffff]
[ 0.749022] pci 0000:00:1c.3: PCI bridge to [bus 09]
[ 0.749284] pci 0000:00:1c.3: bridge window [mem 0xc2000000-0xc20fffff]
[ 0.749686] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.749688] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.749690] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.749691] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 0.749693] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.749694] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc1ffffff]
[ 0.749696] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.749698] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
[ 0.749699] pci_bus 0000:07: resource 1 [mem 0xc2200000-0xc22fffff]
[ 0.749701] pci_bus 0000:08: resource 1 [mem 0xc2100000-0xc21fffff]
[ 0.749702] pci_bus 0000:09: resource 1 [mem 0xc2000000-0xc20fffff]
[ 0.749731] NET: Registered protocol family 2
[ 0.750099] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.750384] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.750661] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.750930] TCP: reno registered
[ 0.751187] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.751448] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.751760] NET: Registered protocol family 1
[ 0.752070] RPC: Registered named UNIX socket transport module.
[ 0.752330] RPC: Registered udp transport module.
[ 0.752595] RPC: Registered tcp transport module.
[ 0.752869] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.776652] pci 0000:01:00.0: Boot video device
[ 0.776705] PCI: CLS 64 bytes, default 64
[ 0.776744] dmar: Host address width 36
[ 0.777002] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.777266] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.777740] dmar: RMRR base: 0x0000009f68c000 end: 0x0000009f6abfff
[ 0.778319] Simple Boot Flag at 0x44 set to 0x1
[ 0.779719] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 0.779985] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 0.780248] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 0.780514] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 0.780801] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 0.781068] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 0.781337] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 0.781621] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 0.781933] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.782657] audit: initializing netlink socket (disabled)
[ 0.782926] type=2000 audit(1369877128.739:1): initialized
[ 0.783952] bounce pool size: 64 pages
[ 0.784213] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.787681] VFS: Disk quotas dquot_6.5.2
[ 0.788005] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.789593] NFS: Registering the id_resolver key type
[ 0.789855] Key type id_resolver registered
[ 0.790113] Key type id_legacy registered
[ 0.790409] FS-Cache: Netfs 'cifs' registered for caching
[ 0.790779] Key type cifs.spnego registered
[ 0.791040] Key type cifs.idmap registered
[ 0.791344] NTFS driver 2.1.30 [Flags: R/W].
[ 0.791756] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.792109] fuse init (API version 7.21)
[ 0.793052] Btrfs loaded
[ 0.793311] msgmni has been set to 1550
[ 0.793657] SELinux: Registering netfilter hooks
[ 0.794215] Key type asymmetric registered
[ 0.794555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.795035] io scheduler noop registered
[ 0.795292] io scheduler deadline registered
[ 0.795606] io scheduler cfq registered (default)
[ 0.796108] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.796365] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.796740] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.797308] intel_idle: MWAIT substates: 0x21120
[ 0.797309] intel_idle: v0.4 model 0x3A
[ 0.797310] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.797408] ACPI: AC Adapter [ACAD] (on-line)
[ 0.797818] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 0.798285] ACPI: Power Button [PWRB]
[ 0.798599] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
[ 0.799066] ACPI: Sleep Button [SLPB]
[ 0.799385] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 0.799884] ACPI: Lid Switch [LID0]
[ 0.800192] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.800678] ACPI: Power Button [PWRF]
[ 0.801030] ACPI: Fan [FAN0] (off)
[ 0.801330] ACPI: Fan [FAN1] (off)
[ 0.801646] ACPI: Fan [FAN2] (off)
[ 0.801948] ACPI: Fan [FAN3] (off)
[ 0.802247] ACPI: Fan [FAN4] (off)
[ 0.802552] [Firmware Bug]: ACPI(DGPU) defines _DOD but not _DOS
[ 1.154195] ACPI Warning: _BQC returned an invalid level (20130117/video-486)
[ 1.272292] acpi device:3e: registered as cooling_device5
[ 1.617146] ACPI Warning: _BQC returned an invalid level (20130117/video-486)
[ 1.735293] acpi device:43: registered as cooling_device6
[ 1.735556] ACPI: Video Device [DGPU] (multi-head: yes rom: no post: no)
[ 1.735897] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3c/LNXVIDEO:00/input/input4
[ 1.736447] ACPI: Requesting acpi_cpufreq
[ 1.781804] tsc: Refined TSC clocksource calibration: 2793.653 MHz
[ 1.782067] Switching to clocksource tsc
[ 1.804120] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.804381] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.804815] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.805080] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.805436] isapnp: Scanning for PnP cards...
[ 2.006166] ACPI: Battery Slot [BAT1] (battery present)
[ 2.163064] isapnp: No Plug & Play device found
[ 2.181503] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.182247] sonypi: Sony Programmable I/O Controller Driver v1.26.
[ 2.182694] Non-volatile memory driver v1.3
[ 2.183025] Linux agpgart interface v0.103
[ 2.183438] [drm] Initialized drm 1.1.0 20060810
[ 2.184632] loop: module loaded
[ 2.184990] Guest personality initialized and is inactive
[ 2.185294] VMCI host device registered (name=vmci, major=10, minor=59)
[ 2.185557] Initialized host personality
[ 2.186135] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[ 2.186711] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.187179] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 2.187751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.188217] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 2.188788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.189253] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.189549] Uniform Multi-Platform E-IDE driver
[ 2.189928] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 2.190218] hv_vmbus: registering driver hv_storvsc
[ 2.190596] ahci 0000:00:1f.2: version 3.0
[ 2.190677] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.190702] ahci: SSS flag set, parallel bus scan disabled
[ 2.201335] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl RAID mode
[ 2.201799] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 2.202267] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.206979] scsi0 : ahci
[ 2.207331] scsi1 : ahci
[ 2.207667] scsi2 : ahci
[ 2.208003] scsi3 : ahci
[ 2.208341] scsi4 : ahci
[ 2.208674] scsi5 : ahci
[ 2.208993] ata1: SATA max UDMA/133 abar m2048@0xc2317000 port 0xc2317100 irq 41
[ 2.209460] ata2: DUMMY
[ 2.209715] ata3: SATA max UDMA/133 abar m2048@0xc2317000 port 0xc2317200 irq 41
[ 2.210176] ata4: DUMMY
[ 2.210438] ata5: SATA max UDMA/133 abar m2048@0xc2317000 port 0xc2317300 irq 41
[ 2.210901] ata6: DUMMY
[ 2.211631] libphy: Fixed MDIO Bus: probed
[ 2.211913] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 2.212172] Copyright (c) 2007 Atheros Corporation.
[ 2.236198] atl1c 0000:07:00.0: version 1.0.1.1-NAPI
[ 2.236554] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 2.236815] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.237100] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 2.237365] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.237653] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
[ 2.237912] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.238199] sky2: driver version 1.30
[ 2.238608] PPP generic driver version 2.4.2
[ 2.238928] NET: Registered protocol family 24
[ 2.239189] I2O subsystem v1.325
[ 2.239449] i2o: max drivers = 8
[ 2.239799] I2O ProcFS OSM v1.316
[ 2.240282] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.240546] ehci-pci: EHCI PCI platform driver
[ 2.240853] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.240857] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.241160] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.241637] ehci-pci 0000:00:1a.0: debug port 2
[ 2.245901] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.245914] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc2319000
[ 2.251377] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.251652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.251913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.257471] usb usb1: Product: EHCI Host Controller
[ 2.257730] usb usb1: Manufacturer: Linux 3.9.4 ehci_hcd
[ 2.257990] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.258365] hub 1-0:1.0: USB hub found
[ 2.258629] hub 1-0:1.0: 2 ports detected
[ 2.258982] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.258985] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.259291] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.259766] ehci-pci 0000:00:1d.0: debug port 2
[ 2.264051] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.264063] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc2318000
[ 2.269399] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.269668] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.269930] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.270391] usb usb2: Product: EHCI Host Controller
[ 2.270653] usb usb2: Manufacturer: Linux 3.9.4 ehci_hcd
[ 2.270913] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.271275] hub 2-0:1.0: USB hub found
[ 2.271537] hub 2-0:1.0: 2 ports detected
[ 2.271868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.272174] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.272467] Initializing USB Mass Storage driver...
[ 2.272756] usbcore: registered new interface driver usb-storage
[ 2.273017] USB Mass Storage support registered.
[ 2.273335] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.321634] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.321909] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.322293] mousedev: PS/2 mouse device common for all mice
[ 2.326439] rtc_cmos 00:05: RTC can wake from S4
[ 2.326823] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.327109] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.327596] i2c /dev entries driver
[ 2.327915] ACPI Warning: 0x00004000-0x0000401f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 2.328491] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.329100] IR NEC protocol handler initialized
[ 2.329358] IR RC5(x) protocol handler initialized
[ 2.329618] IR RC6 protocol handler initialized
[ 2.329875] IR JVC protocol handler initialized
[ 2.330133] IR Sony protocol handler initialized
[ 2.330390] IR RC5 (streamzap) protocol handler initialized
[ 2.330652] IR SANYO protocol handler initialized
[ 2.330910] IR MCE Keyboard/mouse protocol handler initialized
[ 2.331377] md: linear personality registered for level -1
[ 2.331639] md: raid1 personality registered for level 1
[ 2.331944] device-mapper: uevent: version 1.0.3
[ 2.332279] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 2.332774] EISA: Probing bus 0 at eisa.0
[ 2.333032] EISA: Cannot allocate resource for mainboard
[ 2.333456] cpuidle: using governor ladder
[ 2.333907] cpuidle: using governor menu
[ 2.334274] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.334539] EFI Variables Facility v0.08 2004-May-17
[ 2.334882] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 2.335408] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.336000] usbcore: registered new interface driver usbhid
[ 2.336259] usbhid: USB HID core driver
[ 2.336710] ashmem: initialized
[ 2.337142] goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO.
[ 2.337608] goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16
[ 2.338112] hv_utils: Registering HyperV Utility Driver
[ 2.338371] hv_vmbus: registering driver hv_util
[ 2.338632] hv_vmbus: registering driver hv_balloon
[ 2.339394] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 2.378911] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.515798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.522217] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.522984] ata1.00: ATA-8: ST9500423AS, 0006DEM1, max UDMA/133
[ 2.523263] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.524896] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.525658] ata1.00: configured for UDMA/133
[ 2.528020] scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0006 PQ: 0 ANSI: 5
[ 2.528997] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.529399] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.529733] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.530027] sd 0:0:0:0: [sda] Write Protect is off
[ 2.530287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.530301] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.560858] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.589220] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.590588] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.675414] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.675694] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.676627] hub 1-1:1.0: USB hub found
[ 2.677068] hub 1-1:1.0: 6 ports detected
[ 2.780054] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.834194] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.837200] ata3.00: ATAPI: HL-DT-STDVD+/-RW GA31N, A201, max UDMA/100
[ 2.846196] ata3.00: configured for UDMA/100
[ 2.860738] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GA31N A201 PQ: 0 ANSI: 5
[ 2.874721] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.875198] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.875979] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.876319] sr 2:0:0:0: Attached scsi generic sg1 type 5
|