LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 12-20-2004, 08:25 PM   #1
nny0000
Member
 
Registered: Aug 2003
Distribution: Slackware, Ubuntu
Posts: 158

Rep: Reputation: 30
After update, X doesn't work right


Since I have dial up, I took my computer to a friends and used swaret to upgrade my system from 10 to current. All went well until I took my computer home and tried starting X. The screen starts off by looking like it on the wrong resolution then it goes back to normal. Although when I run a program the windows aren't drawn right or are missing borders. The other problem is that the fonts don't display on the KDE menu or parts of GNOME.

Thanks for the help!!!
Here is my X log truncated:

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/localhost:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.4.27 i686 [ELF]
Current Operating System: Linux localhost 2.6.9 #3 Sat Dec 4 20:47:35 EST 2004 i686
Build Date: 18 October 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 19 19:01:45 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corp. 82810E DC-133 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xf8000000/26, 0xf4000000/19
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "speedo"
(WW) Warning, couldn't open module speedo
(II) UnloadModule: "speedo"
(EE) Failed to load module "speedo" (module does not exist, 0)
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810e found
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): DRI is disabled because it runs only at 16-bit depth.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel(R) 810, Intel(R) 815 Chipset Video BIOS
(II) I810(0): VESA VBE OEM Software Rev: 36.56
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(R) 810, Intel(R) 815 Chipset
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: CTX Model: 7695 Serial#: 0
(II) I810(0): Year: 2000 Week: 0
(II) I810(0): EDID Version: 1.1
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) I810(0): Signal levels configurable
(II) I810(0): Sync: Separate CompositeSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) I810(0): Max H-Image Size [cm]: horiz.: 33 vert.: 25
(II) I810(0): Gamma: 2.10
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.627 redY: 0.336 greenX: 0.279 greenY: 0.588
(II) I810(0): blueX: 0.143 blueY: 0.059 whiteX: 0.281 whiteY: 0.311
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@67Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@87Hz (interlaced)
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): 1152x870@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 120 vid: 31793
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 100 vid: 26693
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) I810(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 36.0 MHz Image Size: 310 x 232 mm
(II) I810(0): h_active: 640 h_sync: 672 h_sync_end 720 h_blank_end 832 h_border: 0
(II) I810(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 509 v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 56.2 MHz Image Size: 310 x 232 mm
(II) I810(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
(II) I810(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 94.5 MHz Image Size: 310 x 232 mm
(II) I810(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) I810(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) I810(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz,(II) I810(0):
(II) I810(0): I810CheckAvailableMemory: 151548k available

(II) I810(0): Monitor0: Using hsync range of 30.00-70.00 kHz
(II) I810(0): Monitor0: Using vrefresh range of 50.00-120.00 Hz
(II) I810(0): Clock range: 9.50 to 136.00 MHz
(WW) (1152x900/58Hz,Monitor0) mode clock 80MHz exceeds DDC maximum 0MHz
(WW) (1024x768/76Hz,Monitor0) mode clock 85MHz exceeds DDC maximum 0MHz
(WW) (800x600/85Hz,Monitor0) mode clock 60.75MHz exceeds DDC maximum 0MHz
(WW) (1280x1024/61Hz,Monitor0) mode clock 110MHz exceeds DDC maximum 0MHz
(WW) (640x350,Monitor0) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(WW) (640x400,Monitor0) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(WW) (720x400,Monitor0) mode clock 35.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(WW) (640x480,Monitor0) mode clock 25.2MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,Monitor0) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,Monitor0) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,Monitor0) mode clock 36MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (800x600,Monitor0) mode clock 36MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,Monitor0) mode clock 40MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,Monitor0) mode clock 50MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,Monitor0) mode clock 49.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,Monitor0) mode clock 56.3MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Monitor0) mode clock 65MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Monitor0) mode clock 75MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Monitor0) mode clock 78.8MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,Monitor0) mode clock 94.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1152x864,Monitor0) mode clock 108MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(WW) (1280x960,Monitor0) mode clock 108MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,Monitor0) mode clock 108MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(WW) (832x624,Monitor0) mode clock 57.284MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(WW) (1152x768,Monitor0) mode clock 64.995MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,Monitor0) mode clock 122MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1600x1024,Monitor0) mode clock 106.91MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) I810(0): Virtual size is 1400x1050 (pitch 2048)
(--) I810(0): Display dimensions: (330, 250) mm
(--) I810(0): DPI set to (107, 106)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(==) I810(0): Write-combining range (0xf8000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 122.0 MHz [ 0x3b 0xa 0x20 ] [ 61 12 2 ]
(II) I810(0): chose watermark 0x22419000: (tab.freq 128.9)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) I810(0): Allocated of 4096 bytes for HW cursor
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x00801000 (pgoffset 2049)
(II) I810(0): Allocated of 16384 bytes for ARGB HW cursor
(II) I810(0): Adding 256 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) I810(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/mouse"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Keyboard0: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
GetModeLine - scrn: 0 clock: 122000
GetModeLine - hdsp: 1400 hbeg: 1488 hend: 1640 httl: 1880
vdsp: 1050 vbeg: 1052 vend: 1064 vttl: 1082 flags: 5
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGARTMemory: unbind key 2
 
Old 12-20-2004, 08:36 PM   #2
sh1ft
Member
 
Registered: Feb 2004
Location: Ottawa, Ontario, Can
Distribution: Slackware, ubuntu
Posts: 391

Rep: Reputation: 31
Hate to be a dick but someone has to say it. Did you use the handy little search link at the top of the page at all? This problem has been beaten to death for ages..
 
Old 12-21-2004, 04:24 AM   #3
Slovak
Member
 
Registered: Oct 2004
Location: North Olmsted, Oh
Distribution: Slackware 10
Posts: 206

Rep: Reputation: 30
xorgconfig
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Update than wont work Eugney Linux - Software 1 07-07-2005 07:06 AM
CD Update FC 2 to FC3 didn't work ?? 1957hemi Fedora 1 11-10-2004 05:21 PM
Networking will not work after BIOS update Erik GJ. Linux - Networking 2 07-19-2004 10:13 PM
update won't work for 10.0CE whorush Mandriva 15 04-10-2004 12:09 AM
Webmin doesn't work after update Mikessu Debian 1 02-08-2004 11:22 AM


All times are GMT -5. The time now is 03:19 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration