LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 04-28-2006, 01:35 PM   #31
drkstr
Senior Member
 
Registered: Feb 2006
Location: Seattle, WA: USA
Distribution: Slackware 11.0
Posts: 1,191

Rep: Reputation: 45

Cool beans. It's strange that running 'xorgsetup' did not autodetect all of the correct settings for you. I have the same device (i810) and It created the xorg.conf file perfectly. sync range and everything. All I had to do was add in the resolution I wanted. Well anyways, glad it's working for you now.

regards,
...drkstr
 
Old 04-28-2006, 11:25 PM   #32
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
yeah, i'm wondering if maybe i screwed up an install command or something. ?? i dunno. I now have it working i guess so my next project is figuring out where my CD-RW drive is..

finally got some books for this so that should help.

btw- this is more off topic but where/what exactly is the i810? Is it on a card? can I swap it out for something else?

how much memory do you tell xorgconfig the card has? I read somewhere it just shares system memory.

Last edited by bioe007; 04-28-2006 at 11:54 PM.
 
Old 04-29-2006, 02:09 AM   #33
drkstr
Senior Member
 
Registered: Feb 2006
Location: Seattle, WA: USA
Distribution: Slackware 11.0
Posts: 1,191

Rep: Reputation: 45
Quote:
i dunno. I now have it working i guess so my next project is figuring out where my CD-RW drive is..
'mount /dev/cdrom /mnt/cdrom' all files on the cd will be in the /mnt/cdrom directory after this command. 'umount /mnt/cdrom/' when you are finished with it. Is that what you are refering to?

Quote:
where/what exactly is the i810? Is it on a card? can I swap it out for something else? how much memory do you tell xorgconfig the card has? I read somewhere it just shares system memory.
i810 is the driver for the intel onboard video adapter. You specify how much system memory it uses in the BIOS. For my bios I have the option for 1mb and 8mb. I have it set for 8 with the line 'VideoRam 8192' in my xorg.conf however this is not really necessary. This is usually only used with devices that had a problem being autodetected, the i810 not being one of them. I just put it in there for shits and giggles. You can't swap it for something else, but you can get another video card provided you have the room in your computer. FYI: NVIDIA cards work very well in linux if your in the market.

regards,
...drkstr
 
Old 05-02-2006, 12:41 AM   #34
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
Quote:
Originally Posted by drkstr
'mount /dev/cdrom /mnt/cdrom' all files on the cd will be in the /mnt/cdrom directory after this command. 'umount /mnt/cdrom/' when you are finished with it. Is that what you are refering to?
I can:

#mount /mnt/cdrom/

but that is my CD-ROM - I have also a CD-RW/DVD that is 'slaved' (i think thats the correct term) to the CD-ROM. I am not sure how to access that.

interestingly enough (and the reason for my delay in replying here) I have installed slackware on my laptop:

Dell Inspiron 8500, P4 2.4Ghz, 512MB, 30Gb IDE-HD, ATI Radeon 9000(32Mb), CD/DVD combo, WSXGA+

and I had the same problem with xorgsetup.. two lines for Horizsync except now the vertrefresh also seems wacky.

one other new problem, with the laptop i kind of raced through the windows install and didn't install all the dell drivers.. make a long story short windows crapped out during the driver installs and i had to re-install windows. which seems to have re-wrote my MBR and now LILO is gone! is there anyway to simply re-write LILO to MBR, without having to completely re-install slackware?

-should i be posting all these questions in different threads?
 
Old 05-02-2006, 02:04 AM   #35
drkstr
Senior Member
 
Registered: Feb 2006
Location: Seattle, WA: USA
Distribution: Slackware 11.0
Posts: 1,191

Rep: Reputation: 45
Quote:
but that is my CD-ROM - have also a CD-RW/DVD that is 'slaved' (i think thats the correct term) to the CD-ROM. I am not sure how to access that.
Here's what's really going on behind the scenes. Your cdrom get's mounted with a command like 'mount -d /dev/hdc -t iso9660 /mnt/cdrom'. A shortcut gets created by adding a line in the fstab and thus the command can be shortened to 'mount /mnt/cdrom' (note /dev/cdrom is a link created by Slackware to the actual device name of your cdrom). To mount your 2nd cd drive, you need to add a similar line in the fstab with the correct device. For instance, to allow non-root users to mount cdrom/cdrw, do 'mkdir /mnt/cdrw' then update the /etc/fstab with:
Code:
/dev/hdc       /mnt/cdrom    auto     noauto,users,ro        0   0
/dev/hdd       /mnt/cdrw     auto     noauto,users,ro        0   0
You can them mount the cdrw just like the cdrom with 'mount /mnt/cdrw'

Here's how the IDE devices get assigned in linux.

hda - Primary Master
hdb - Primary Slave
hdc - Secondary Master
hdd - Secondary Slave

If it's a hard disk, partitions go in order such as, hda1, hda2, ...etc.

Quote:
is there anyway to simply re-write LILO to MBR, without having to completely re-install slackware?
Boot into the setup with the slackware CD. Select partition that houses the root filesystem and then skip all of the formating/installing and go strait to the configuration. Redo the configuration and reboot when done.

Quote:
and I had the same problem with xorgsetup.. two lines for Horizsync except now the vertrefresh also seems wacky.
O_o very odd. What version of X do you have on your CD? If your CD is slackware current, consider uninstalling all X packages and then downloading the latest version in the stable 10.2 slackware release. If you are using an older version of X, try downloading the newest version from slackware-current. (I know that's contradictory but when in doubt, try something different.) Otherwise you will have to fix it by hand by just playing with the settings until you get what you like.

Hope I was able to explain this stuff ok. Let me know if you have any other questions.

regards,
...drkstr
 
Old 05-16-2006, 12:20 AM   #36
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
hi again.. sorry for the delay. had a trip to sacramento.. just getting back to this now.

i got some settings by searching and finding others with dell laptops and used what they set for the rates. i have also read that the horiz/vert rates do not apply to LCDs - so i am only worried now that i might break something with these (arbitrary?) settings. otherwise i have KDE working on both desk and laptop.

my x version is: 6.8.1-i486

back to the desktop: this is what my /etc/fstab looked like:

/dev/cdrom /mnt/cdrom iso9660 noauto, users, ro 0 0

i changed it to:

/dev/hdc /mnt/cdrom iso9660 noauto,users,ro 0 0
/dev/hdd /mnt/cdrw auto noauto,users,ro 0 0

but...
#ls /mnt
cdrom/ floppy/ hd/
#

after rebooting. i will continue to learn...
 
Old 05-16-2006, 06:21 AM   #37
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
You need to create the directory /mnt/cdrw yourself.
 
Old 05-16-2006, 08:49 AM   #38
drkstr
Senior Member
 
Registered: Feb 2006
Location: Seattle, WA: USA
Distribution: Slackware 11.0
Posts: 1,191

Rep: Reputation: 45
Quote:
horiz/vert rates do not apply to LCDs - so i am only worried now that i might break something with these (arbitrary?) settings.
yikes, good to know. thanks for the info.

Quote:
changed it to:

/dev/hdc /mnt/cdrom iso9660 noauto,users,ro 0 0
/dev/hdd /mnt/cdrw auto noauto,users,ro 0 0

but...
#ls /mnt
cdrom/ floppy/ hd/
what nylex said. just make sure the directory is owned by the person you want to access it. I'm not sure if it matters to much since it's a CD but it wouldn't hurt.

regards,
...drkstr
 
Old 12-29-2006, 01:21 AM   #39
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
well, this thread has been dead for some time. mostly because I have been neglecting my linux 'learning' while doing other projects.

I would feel guilty posting a new thread with similar problems for the same box so here goes.

I have the same system with some cheap upgrades:

P3 550mHz, 392MB RAM, 2xIDE HD: 17GB (5g root,11g /usr/local, 600m swap) 80GB (40 home, 40 other), CDROM, CDRW

I am still working with slackware 10.2 because after d/ling the 3 new slackware 11.0 discs and trying 3 different burning programs my P3 box does not recognize the slackware boot (D1) CD. The Slack-11D1 disc DOES boot on my dell inspiron 8500.

*I have managed to get X and KDE working now, but occasionally it seems to 'hang' i.e. the mouse does not move and windows do not refresh for a couple of seconds.

*I can mount the CDROM, but only as root ? i have been looking for a way to make it available to all users.

*When copying CDs to the /home sometimes the copy operation gets stuck. (I am just copy/pasting them in KDE)

* I tried playing a .mov file and some program called Noatuo keeps playing it, like over and over again. I can't get it to stop. I close the window and it pops back up like 2mins later.

* I found in 'Running Linux' 5th ED. that there is supposed to be a /etc/skel/ that contains something like standard configuration files for /usr/local when adduser is called, but i can not find it (etc/skel)

* something i screwed up - I opened mozilla in KDE and when the firefox update showed up I downloaded the latest version and used:

#updatepkg mozilla%firefox-xxx

now i have neither mozilla or firefox in KDE (woops). There is a firefox directory. Can I fix this by just using:

#updatepkg firefox%mozilla-xxx

-where the mozilla package is from the slackware installation CD?

well, thanks in advance. I'm sorry for the long list but as always help is greatly appreciated!
 
Old 12-29-2006, 01:50 AM   #40
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
Quote:
Originally Posted by bioe007
*I can mount the CDROM, but only as root ? i have been looking for a way to make it available to all users.
Add the word "users" to the 4th column of the relevant line of your /etc/fstab (i.e. the one for your CD-ROM). From the mount man page:

users Allow every user to mount and unmount the file system. This option implies the options noexec, nosuid, and nodev (unless overridden by subsequent options, as in the option line users,exec,dev,suid).
 
Old 12-29-2006, 07:51 AM   #41
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
Nylex, thanks much! Its working..

btw- i did figure out the noauto thing...

Last edited by bioe007; 12-29-2006 at 07:56 AM.
 
Old 01-03-2007, 04:55 AM   #42
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
new problem, same box.

i was feeling adventurous and so decided to build my own kernel. i got it to 'work' the first time through - however, now X seems to be screwed up. I CAN boot my old kernel and still run X but trying my 2.6.19test then startx produces KDE with missing 'words' and also missing various backgrounds for menus etc...

is there an 'easy' way to figure out what I have screwed up in compiling the kernel? it seems that all my other devices (HDs, CDs, Mouse) are working properly and dmesg gives only a couple of unexpected warnings.

I have tried to figure out what is going on from /var/log/Xorg.0.log but ?? what am I looking for?

I see that when I set 'VideoRam' to the value i find from lspic -v = 512 does not help...

i do not know what else to look at - besides xorg.conf?

all help greatly appreciated
 
Old 01-03-2007, 05:16 AM   #43
miaviator278
Member
 
Registered: Dec 2003
Location: Al-Diwania, Iraq (deployed)
Distribution: Slackware ONLY
Posts: 237

Rep: Reputation: 30
Could you post your Xorg.0.log so we see what went wrong.
 
Old 01-03-2007, 05:40 AM   #44
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.4.29 i686 [ELF]
Current Operating System: Linux hgv 2.6.19.35007 #1 Wed Jan 3 21:01:00 UTC 2007 i686
Build Date: 23 January 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 4 03:31:09 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "Intel 810"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Speedo/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7120 card 8086,7120 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7121 card 8086,0200 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 8086,2415 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,2416 card 8086,2416 rev 02 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 100b,0020 card 1385,f311 rev 00 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xefd00000 - 0xefdfffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe7b00000 - 0xe7bfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corp. 82810 CGC [Chipset Graphics Controller] rev 3, Mem @ 0xe8000000/26, 0xeff80000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[1] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
[2] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
[4] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[5] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[6] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[7] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[8] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[1] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
[2] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
[4] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[5] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[6] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[7] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[8] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[9] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[6] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
[7] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[15] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[16] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[6] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
[7] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
[11] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[14] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[15] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[16] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[6] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
[7] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) RTMemory: unbind key 2
 
Old 01-03-2007, 05:41 AM   #45
bioe007
Member
 
Registered: Apr 2006
Location: lynnwood, wa - usa
Distribution: archlinux
Posts: 654

Original Poster
Rep: Reputation: 30
< Xorg.0.log - cont from previous msg >

IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
[14] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[16] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[17] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[18] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Depth 24, (--) framebuffer bpp 24
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): DRI is disabled because it runs only at 16-bit depth.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 2.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 2.17
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: i810 Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: LTN Model: a795 Serial#: 16843009
(II) I810(0): Year: 1999 Week: 22
(II) I810(0): EDID Version: 1.1
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) I810(0): Sync: Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) I810(0): Gamma: 1.01
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.004 redY: 0.004 greenX: 0.004 greenY: 0.005
(II) I810(0): blueX: 0.004 blueY: 0.004 whiteX: 0.004 whiteY: 0.005
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 720x400@88Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@67Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@56Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@87Hz (interlaced)
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): 1152x870@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) I810(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 94.5 MHz Image Size: 300 x 225 mm
(II) I810(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) I810(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) I810(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 69 kHz,(II) I810(0):
(II) I810(0): Monitor name: A1770NSL
(II) I810(0): Serial No: 922640586
(--) I810(0): Chipset: "i810"
(--) I810(0): Linear framebuffer at 0xE8000000
(--) I810(0): IO registers at addr 0xEFF80000
(II) I810(0): I810CheckAvailableMemory: 327676k available
(**) I810(0): Will alloc AGP framebuffer: 8192 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): My Monitor: Using hsync range of 31.50-69.00 kHz
(II) I810(0): My Monitor: Using vrefresh range of 50.00-120.00 Hz
(II) I810(0): Clock range: 9.50 to 136.00 MHz
(WW) (640x350,My Monitor) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(WW) (640x400,My Monitor) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(WW) (720x400,My Monitor) mode clock 35.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(WW) (640x480,My Monitor) mode clock 25.2MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,My Monitor) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,My Monitor) mode clock 31.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (640x480,My Monitor) mode clock 36MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(WW) (800x600,My Monitor) mode clock 36MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,My Monitor) mode clock 40MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,My Monitor) mode clock 50MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,My Monitor) mode clock 49.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(WW) (800x600,My Monitor) mode clock 56.3MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,My Monitor) mode clock 65MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,My Monitor) mode clock 75MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,My Monitor) mode clock 78.8MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1024x768,My Monitor) mode clock 94.5MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(WW) (1152x864,My Monitor) mode clock 108MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(WW) (1280x960,My Monitor) mode clock 108MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(WW) (1280x1024,My Monitor) mode clock 108MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(WW) (832x624,My Monitor) mode clock 57.284MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(WW) (1152x768,My Monitor) mode clock 64.995MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(WW) (1400x1050,My Monitor) mode clock 122MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(WW) (1600x1024,My Monitor) mode clock 106.91MHz exceeds DDC maximum 0MHz
(II) I810(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) I810(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) I810(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) I810(0): Not using default mode "1280x960" (width too large for virtual size)
(II) I810(0): Not using default mode "1152x864" (width too large for virtual size)
(II) I810(0): Not using default mode "1152x768" (width too large for virtual size)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) I810(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) I810(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) I810(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) I810(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) I810(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) I810(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) I810(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) I810(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) I810(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) I810(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) I810(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) I810(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) I810(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) I810(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) I810(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) I810(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) I810(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) I810(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) I810(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) I810(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) I810(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) I810(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) I810(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) I810(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) I810(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) I810(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(--) I810(0): Display dimensions: (320, 240) mm
(--) I810(0): DPI set to (81, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xeff80000 - 0xefffffff (0x80000) MS[B]
[1] 0 0 0xe8000000 - 0xebffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xefdff000 - 0xefdfffff (0x1000) MX[B]
[8] -1 0 0xeff80000 - 0xefffffff (0x80000) MX[B](B)
[9] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
[16] -1 0 0x0000d800 - 0x0000d87f (0x80) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[18] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
[19] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[20] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[21] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) I810(0): Write-combining range (0xe8000000,0x4000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) I810(0): Setting dot clock to 94.5 MHz [ 0x3d 0xe 0x20 ] [ 63 16 2 ]
(II) I810(0): chose watermark 0x22218000: (tab.freq 94.5)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(WW) I810(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) I810(0): No physical memory available for 4194304 bytes of DCACHE
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) I810(0): Allocated of 4096 bytes for HW cursor
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x00801000 (pgoffset 2049)
(II) I810(0): Allocated of 16384 bytes for ARGB HW cursor
(II) I810(0): Adding 512 scanlines for pixmap caching
(II) I810(0): Allocated Scratch Memory
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(**) I810(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
SetClientVersion: 0 8
(II) I810(0): xf86UnbindGARTMemory: unbind key 0
(II) I810(0): xf86UnbindGARTMemory: unbind key 1
(II) I810(0): xf86UnbindGA
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
unable to install php5 - configure: error: libjpeg.(a|so) not found. vikram_cvk Linux - Software 6 11-01-2009 08:00 AM
BASH problems: "configure, make, make install" commands don't work ditch* Linux - General 3 07-19-2005 04:37 PM
why some of my commands not found sleepyguy Linux - Newbie 4 01-10-2005 09:07 PM
Webalizer: configure: error: png library not found... please install png. mikeshn Linux - Software 5 01-10-2005 02:28 PM
configure, make and make install commands don't work for me Fenster Fedora 8 08-18-2004 10:58 AM


All times are GMT -5. The time now is 12:27 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration