LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 11-07-2010, 10:07 AM   #1
tikcop1
LQ Newbie
 
Registered: Oct 2010
Posts: 13

Rep: Reputation: 0
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-


Hello

Could somebody help me. I have random X freezes (suddenly keyboard and mouse stop to react). Xorg.O.log is error and warnings free. The only problems I see in syslog/ dmesg are related to ACPI.

I have Asus P5E3 Deluxe motherboard. Slackware 13.1
Linux vareg 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz GenuineIntel GNU/Linux

Code:
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
ACPI: Power Button [PWRB]
ACPI: Power Button [PWRF]
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Assus ATK0110 that accoridng to google should solve it is loaded as module. I tried also to compile it with yes flag. Still no difference.
Code:
CONFIG_KEYBOARD_ATKBD=y
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL_HWMON=y
Kindly asking to help.

I ahve also today upgraded my BIOS to 1303 version. Still no difference.
 
Old 11-08-2010, 06:47 AM   #2
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: SlackwareŽ
Posts: 11,396
Blog Entries: 3

Rep: Reputation: 1482Reputation: 1482Reputation: 1482Reputation: 1482Reputation: 1482Reputation: 1482Reputation: 1482Reputation: 1482Reputation: 1482Reputation: 1482
Hi,

Welcome to LQ!

I would first do a memory check by using memtest86+. Let the test run for a good test period unless obvious errors are presented.

UBCD Ultimate Boot CD & SystemRescueCd have some useful diagnostic tools & system utilities to check the system for potential errors or problems.

Quote:
SystemRescueCd Aida:
Aida is an advanced diagnostic system program. It will detect many pieces of hardware of your computer, such as the Processor, chipset, mainboard, network card, ... It's very useful when you want to download a driver and you don't know which one to take.
 
Old 11-08-2010, 01:49 PM   #3
tobyl
Member
 
Registered: Apr 2003
Location: uk
Distribution: slackware current
Posts: 743

Rep: Reputation: 51
tikcop1

If no luck with previous advice...

You could give a bit more information. Is it a new problem (ie since upgrading or installing Slackware) or is it the first time you use this hardware?

It sounds like a hardware/firmware or kernel issue rather than the OS to me.

The question is whether your reported error is the one causing your problem. You could begin to find out by seeing which devices are conflicting.
Try (as root) #cat /proc/ioports
You may see two devices with overlapping address range.

also do a bit of reading up on your bios settings.
finally, are your mouse and keyboard usb?

tobyl
 
Old 11-11-2010, 07:41 AM   #4
tikcop1
LQ Newbie
 
Registered: Oct 2010
Posts: 13

Original Poster
Rep: Reputation: 0
Hello

Thanks a lot for interest.
I run memtest for >30 min. Not single error occured. I have USB mouse and psp/2 keyboard
it is the same hardware for last few months, i remember with Slackware 12.0 was no issue. I lived with it but finally I said stop. I posted for it on different forums. No help yet.

lsusb
http://www.nopaste.pl/uxb

lspci
http://www.nopaste.pl/uxa

output of ioports
http://www.nopaste.pl/ux8

Usually during that freeze I talk to people via skype or teamspeak. Despite keyboard/ mouse do not work I can still continue to talk. So system looks to work. Those freezes are really random. Occurs also when no skype no teamspeak. Display is frozen however. Keyboard react only to SysRq+SUB
I had them also on Slackware 13.0. Now I run 13.1 They still happens but less frequently

Code:
cat /var/log/Xorg.0.log | egrep "WW|EE"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/local" does not exist.
(WW) The directory "/usr/share/fonts/CID" does not exist.
(II) Loading extension MIT-SCREEN-SAVER
(WW) Genius NetScroll+ Superior: ignoring absolute axes.
(WW) Genius NetScroll+ Superior: ignoring absolute axes.
(WW) Genius NetScroll+ Superior: ignoring absolute axes.
whole Xorg log below
http://www.nopaste.pl/uxd

Code:
Linux 2.6.33.4-smp #2 SMP Wed May 12 22:47:36 CDT 2010 i686 Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz GenuineIntel GNU/Linux


direct rendering: Yes
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 8800 GT/PCI/SSE2
OpenGL version string: 3.2.0 NVIDIA 195.36.15
OpenGL shading language version string: 1.50 NVIDIA via Cg compiler
OpenGL extensions:
    GL_EXT_Cg_shader, GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
Today I run CD live Ubuntu 10.10 no ACPI errors in syslog!

Last edited by tikcop1; 11-11-2010 at 08:02 AM.
 
Old 11-11-2010, 01:22 PM   #5
tobyl
Member
 
Registered: Apr 2003
Location: uk
Distribution: slackware current
Posts: 743

Rep: Reputation: 51
tikcop1

After some googling, I'm thinking that this error is not the cause of your freezes.
That ioport dump did not show the conflict, did that come from when Ubuntu was running? Slackware uses a vanilla kernel but I know that Ubuntu patches the kernel with ACPI workarounds. However it seems that this error can probably be ignored. If you want diagnose further, I would try a kernel recompile with SMbus disabled.

See http://lkml.org/lkml/2008/5/9/251 for my reasoning.

The first thing I would do however is update your NVIDIA driver. You appear to have 195.36.15. I looked up 8800GT, and find 260.19.21?

tobyl
 
Old 11-11-2010, 01:58 PM   #6
tikcop1
LQ Newbie
 
Registered: Oct 2010
Posts: 13

Original Poster
Rep: Reputation: 0
Smile

Tobyl

I did updated NVIDIA drivers to version 260.19.21. Will test it for while. To see. Hope it will help

In regards to ACPI errors will recompile kernel. Let you know any findings.

Thank you so far far any help. Count for the future.

All posted logs including ioports came from Slackware only.
 
Old 11-12-2010, 12:51 PM   #7
tikcop1
LQ Newbie
 
Registered: Oct 2010
Posts: 13

Original Poster
Rep: Reputation: 0
I have just got a next freeze. So it is not NVIDIA I suppose. Had to hard reboot and did checked logs. In Xorg.0.log I see this

Code:
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0611:1043:8270 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072
I am not sure

Last edited by tikcop1; 11-12-2010 at 12:56 PM.
 
Old 11-12-2010, 02:59 PM   #8
tobyl
Member
 
Registered: Apr 2003
Location: uk
Distribution: slackware current
Posts: 743

Rep: Reputation: 51
Hi tikcop1

that's not an error message, I don't see anything untoward there.

My googling suggests that the error in your post is unlikely to be the cause of the freezes, but I can understand why you want rid of it.
My interpretation is that there is another driver than the ACPI one (CONFIG_SENSORS_ATK0110) being loaded, otherwise it would get used, and you would not see

ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

So I would experiment with the Hardware monitoring support section of the kernel some more, initially by disabling the whole lot. Then compile as modules, and check the lsmod output to see what is happening.

If you can get rid of this message, at least we can eliminate it from the inquiry!

I'm a bit surprised that this problem isn't affecting more owners of your motherboard, which makes me wonder if the problem isn't caused by some peripheral of yours, maybe the genius netscroll? have you got another mouse to try?

tobyl
 
Old 11-12-2010, 03:42 PM   #9
H_TeXMeX_H
Guru
 
Registered: Oct 2005
Location: $RANDOM
Distribution: slackware64
Posts: 12,928
Blog Entries: 2

Rep: Reputation: 1269Reputation: 1269Reputation: 1269Reputation: 1269Reputation: 1269Reputation: 1269Reputation: 1269Reputation: 1269Reputation: 1269
Try another kernel version, that could be it too. I've had instability with some recent kernels and had to upgrade several times to achieve stability.
 
Old 11-17-2010, 02:20 PM   #10
tikcop1
LQ Newbie
 
Registered: Oct 2010
Posts: 13

Original Poster
Rep: Reputation: 0
Hello

I am testing system with Logitech USB Optical Mouse now.
So far so good, not any single freeze. No any errors/ warnings.

Thanks for advice.

Still this Logitech is very simple 2 button & roller mouse.

So I was googling to understand log warnings for

Code:
(WW) Genius NetScroll+ Superior: ignoring absolute axes.
Is there any chance to force Genius to mitigate that warnings? Genius has some more buttons and is nicer ...

ps. I will try also recompile kernels to see what can I do for ACPI errors. Will post here any findings

Many thanks in advance

Last edited by tikcop1; 11-17-2010 at 02:25 PM.
 
Old 11-19-2010, 05:14 PM   #11
tobyl
Member
 
Registered: Apr 2003
Location: uk
Distribution: slackware current
Posts: 743

Rep: Reputation: 51
Hi tikcop1

I have a suspicion that you are going to have a bit of trouble getting that mouse to behave. I would research other mice that are more linux friendly, that have the functions you like. Having said that, there are some things you can try first.

Do you use a an xorg.conf file? This file is no longer obligatory, but can still be useful. This seemed quite interesting:

http://ubuntuforums.org/showthread.p...ighlight=evdev


I found a forum post from Arch linux (the Arch guys do post some really useful stuff on all manner of topics) which seems relevant to you. Your Xorg log shows some weird stuff relating to Macintosh mice before it loads the Genius config. eg

"config/hal: Adding input device Macintosh mouse button emulation" etc etc

now see this:

https://bbs.archlinux.org/viewtopic.php?id=60986

this involves creating a hal blacklist file. I don't know much about this, but I am sure it would go in /etc/hal (not /usr/share/hal) to avoid system upgrades overwriting it.

This all depends on how much effort you want to go to, and if you are into experimenting. You could end up spending a lot of time on it without much to show for it. If you want to have a go, I will do my best to assist.

tobyl
 
Old 11-25-2010, 02:22 PM   #12
camlt63
LQ Newbie
 
Registered: Nov 2010
Distribution: Debian
Posts: 11

Rep: Reputation: 0
I have what looks like a very similar problem.
Also for me, "I have random X freezes (Suddenly keyboard and mouse stop to react). Xorg.O.log is warnings and error free. The only problems I see in syslog / dmesg are related to ACPI.".
in particular:
I/O resource 0000:00:1 f.3 [0x400-0x41f] Conflicts with ACPI region SMRG [0x400-0x40f]

In addition, sometimes, my computer restarts unexpectedly.

I have a motherboard Asus PK5 "and a graphics card" Radeon HD 2600XT; Linux version 2.6.32-5-amd64 (Debian 2.6.32-27).

As suggested, I tried to investigate possible RAM problems and the "mouse macintosh", with yet no results.
I'm beginning to think that it is a problem related to ACPI management....

I don't know well what to do...
 
Old 11-28-2010, 09:59 PM   #13
tobyl
Member
 
Registered: Apr 2003
Location: uk
Distribution: slackware current
Posts: 743

Rep: Reputation: 51
camlt63,

Well as far as we know, tikcop1 had a problem with his genius mouse. The 'mouse macintosh' issue was specific to his xorg.log file and I do not know that this relevent to your problem. The error message in the original post seems to be particularly prevalent with asus bios, but there is as yet no proof that this has any bearing on X freezing.

If you have yet to resolve this problem I would first look for a bios update. Since you have no other error messages, then perhaps this error message is truly the cause of your freezes, but we are far from proving that this is the cause.

If you want to pursue this further, then I would suggest that you consider rebuilding the kernel as I suggested in post #8. Alternatively, you could try a newer kernel as texmex suggested.

It is quite common that when a problem arises, people read their dmesg, logs etc, and presume that the error message they read is the cause of the problem, but this is not always the case.

It would be interesting to know whether the problem (and error message) persists for you with the ubuntu live cd that tikcop used.

tobyl
 
Old 11-30-2010, 05:08 PM   #14
tikcop1
LQ Newbie
 
Registered: Oct 2010
Posts: 13

Original Poster
Rep: Reputation: 0
tobyl

first of all I am sorry for quite a long silence
i wanted be sure

i blacklisted this Macintosh stuff and still having problem of those freezes even with Logitech mouse
(for last week there were at least 4-5)

so after reviewing NVIDIA forum now i test with
idle=poll maxcpus=1 parameters to boot line

i've notice only once ... 2 days ago suddenly system get freeze and after a while unfreeze, i was nearly to hard reset of machine when suddenly mouse and keybord started to work
really strange

ps. still not recompiled kernel but will do it
 
Old 12-02-2010, 07:12 PM   #15
camlt63
LQ Newbie
 
Registered: Nov 2010
Distribution: Debian
Posts: 11

Rep: Reputation: 0
Quote:
Originally Posted by tobyl View Post
camlt63,
If you have yet to resolve this problem I would first look for a bios update. Since you have no other error messages, then perhaps this error message is truly the cause of your freezes, but we are far from proving that this is the cause.

It would be interesting to know whether the problem (and error message) persists for you with the ubuntu live cd that tikcop used.
Thank you so much for your kind reply.
I had already updated the BIOS in the past to the latest version (ASUS BIOS 1201) without results.

But in these last days something (better) has changed.
Unfortunately I can not understand what exactly has been to make things better: the problem I had was very random, it is difficult for me to say exactly when things started to get better.

Everything I did was to make the latest proposed by the Debian Testing and there were a few months that I suffered the problem and I tried in vain to solve: very strange..

I tried to look into the recent history of installations and the changelog of the packages.
The updated packages have been different and I only have suspicions that I will try to check:
acpid: from 1:2.0.6-1 to 1:2.0.7-1
firmware-linux-free: from 2.6.32-27 to 2.6.32-28
linux-image-2.6.32-5-amd64: from 2.6.32-27 to 2.6.32-28

The error in the output of ACPI dmeg however remains the same and I have not understood what it generates and how to eliminate it.

Also, forgive my ignorance, I did not understand because in my Xorg.0.log I finds two recognized mouse ("Macintosh mouse button emulation" and a "Logitech USB-PS / 2 Optical Mouse"), although I actually have only a Logitech mouse managed by driver "evdev".

Anyway, thanks a lot for the help.

Last edited by camlt63; 12-02-2010 at 07:20 PM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] How serious is this conflict? ACPI: I/O resource... conflicts with region SMBI holister Linux - Hardware 9 11-10-2010 06:56 PM
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 kees1074 Linux - Hardware 2 09-15-2010 01:29 PM
Cannot cannot allocate resource region of device 0000:00:00:0 & enter runlevel mauriello72 Linux - Kernel 2 03-31-2010 05:08 AM
PCI: Cannot allocate resource region 0 of device 0000:00:12.0 mvo Linux - Hardware 8 12-06-2007 12:12 PM
PCI: Cannot allocate resource region 1 of device 0000:00:00.0 dbfoxnh Linux - Hardware 2 04-22-2005 11:01 AM


All times are GMT -5. The time now is 04:20 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration