LinuxQuestions.org
View the Most Wanted LQ Wiki articles.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 12-15-2008, 01:39 PM   #1
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Rep: Reputation: 31
A new Slackware 12.2 install - T60 Touchpad and hotkeys not working


Thanks to the information provided in an earlier thread I posted, I bit the bullet an installed 12.2 on my ThinkPad T60.

I have been installing extra bits of software. BTW, SlackBuilds.org is amazing. What a great resource.

There are a few things I would appreciate some pointers on. I have done some searching here, but often I don't know what the most appropriate search terms are, so these are probably answered somewhere.

First, when in KDE, I seem to have lost my virtual terminals. Ctrl-Alt_F1 gets me to the "Console" but it does not respond to key strokes.

Second, how can I figure out if ACPI stuff is working correctly on this laptop and how do I get the Fn-key combinations working right?

Third is the TouchPad. I can move the mouse with it OK, but tapping and scrolling doesn't work. In /etc/modprobe.d/psmouse I have the options line commented out. My xorg.conf has the Load "synaptics" statement and I have added a section (from another thread) as follows.

Code:
Section "InputDevice"
        Identifier "Synaptics Touchpad"
        Driver "synaptics"
        Option "Protocol" "auto-dev"
        Option "Device" "/dev/psaux"
        Option "ZAxisMapping" "4 5 6 7"
        # Option "SendCoreEvents" "true"
        # Option "LeftEdge" "1700"
        # Option "RightEdge" "5300"
        # Option "TopEdge" "1700"
        # Option "BottomEdge" "4200"
        # Option "FingerLow" "25"
        # Option "FingerHigh" "30"
        # Option "MaxTapTime" "180"
        # Option "MaxTapMove" "220"
        # Option "VertScrollDelta" "100"
        # Option "MinSpeed" "0.09"
        # Option "MaxSpeed" "0.18"
        # Option "AccelFactor" "0.0015"
        # Option "SHMConfig" "on"
        # Option "Repeater" "/dev/ps2mouse"
        # Option "LTCornerButton" "6"
        # Option "RTCornerButton" "7"
        # Option "LockedDrags" "on"
        # Option "VertEdgeScroll" "on"
        # Option "HorizEdgeScroll" "on"
        # Option "EmulateMidButtonTime" "250"
EndSection
I have re-booted, and still no joy.

Thanks in advance.

Last edited by statguy; 12-16-2008 at 03:29 PM.
 
Old 12-15-2008, 02:49 PM   #2
kfoster23
LQ Newbie
 
Registered: Sep 2006
Location: Lampasas, Texas
Distribution: Slackware
Posts: 8

Rep: Reputation: 0
Ctrl-Alt_F1 will get you to the X11 message console if you are in X11. Try Ctrl-Alt-F2.
 
Old 12-15-2008, 05:45 PM   #3
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Original Poster
Rep: Reputation: 31
Quote:
Originally Posted by kfoster23 View Post
Ctrl-Alt_F1 will get you to the X11 message console if you are in X11. Try Ctrl-Alt-F2.
Ctrl-Alt-F2 gives me a blank screen with a blinking cursor.
 
Old 12-15-2008, 06:05 PM   #4
mRgOBLIN
Slackware Contributor
 
Registered: Jun 2002
Location: New Zealand
Distribution: Slackware
Posts: 999

Rep: Reputation: 227Reputation: 227Reputation: 227
If in runlevel 4 there is a VT on Ctrl-Alt-F6
 
Old 12-15-2008, 06:37 PM   #5
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Original Poster
Rep: Reputation: 31
Quote:
Originally Posted by mRgOBLIN View Post
If in runlevel 4 there is a VT on Ctrl-Alt-F6
Perfect. I just didn't try enough TTY sessions.

One down, two to go.
 
Old 12-16-2008, 12:07 AM   #6
vbisis
Member
 
Registered: Dec 2005
Distribution: Slackware
Posts: 250

Rep: Reputation: 34
Have a look at http://tuxmobil.org/ibm.html

There are lot of descriptions about how to install linux on that notebook. There are not specially for slackware, but some are for linux in general, so you should probably find something for your problems
 
Old 12-16-2008, 07:58 AM   #7
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Original Poster
Rep: Reputation: 31
Thanks vbisis, I have started looking through those.

BTW, I don't think I mentioned it before, but this was a full install of 12.2. I re-formatted the partition containing my previous OS to make sure no SuSE files were left hanging around.

I have tried one other mod on xorg.conf but the touchpad still does not respond to tapping/scrolling.

As for the Fn-keys, the ACPI system (the thinkpad_acpi package is installed) appears to be receiving the key codes but does nothing with them

Code:
# acpi_listen
ibm/hotkey HKEY 00000080 00001002
ibm/hotkey HKEY 00000080 00001003
ibm/hotkey HKEY 00000080 00001004
ibm/hotkey HKEY 00000080 00001005
ibm/hotkey HKEY 00000080 00001006
ibm/hotkey HKEY 00000080 00001007
ibm/hotkey HKEY 00000080 00001008
ibm/hotkey HKEY 00000080 00001009
button/lid LID 00000080 00000001
button/lid LID 00000080 00000002
The last two codes are from closing the lid and opening the lid. I like to have the screen lock when I close the lid. Other than generating a code, lid closure had no effect.

In any case, the most important key to have working is the one (Fn-F7 for me) that switches between internal and external monitors.
 
Old 12-16-2008, 03:27 PM   #8
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Original Poster
Rep: Reputation: 31
OK, this is starting to drive me crazy. First, I have tried different stuff with the xorg.conf and nothing gets the touch-pad fully functional (it worked fine under SuSE so I now it should be possible under Slack). Here is my entire xorg.conf

Code:
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/OTF"
	FontPath     "/usr/share/fonts/Type1"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "xtrap"
	Load  "dri"
	Load  "glx"
	Load  "record"
	Load  "dbe"
	Load  "extmod"
	Load  "type1"
	Load  "freetype"
	Load  "synaptics"
EndSection

Section "ServerFlags"
	Option	    "Xinerama" "off"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "thinkpad60"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "InputDevice"
	Identifier "Synaptics Touchpad"
	Driver "synaptics"
	Option "Protocol" "auto-dev"
	Option "SendCoreEvents" "true"
	Option "Device" "/dev/input/mouse2"
	#Option "Device" "/dev/psaux"
	#Option "HorizScrollDelta" "0"
	Option "LeftEdge" "1700"
	Option "RightEdge" "5300"
	Option "TopEdge" "1700"
	Option "BottomEdge" "4200"
	Option "FingerLow" "25"
	Option "FingerHigh" "30"
	Option "MaxTapTime" "180"
	Option "MaxTapMove" "220"
	Option "VertScrollDelta" "100"
	Option "HorizScrollDelta" "100"
	Option "MinSpeed" "0.09"
	Option "MaxSpeed" "0.18"
	Option "AccelFactor" "0.0015"
	Option "SHMConfig" "on"
	Option "TapButton1" "1"
	Option "TapButton2" "2"
	Option "TapButton3" "3"
EndSection

Section "Monitor"

	#DisplaySize	  330   210	# mm
	Identifier   "Monitor0"
	VendorName   "IBM"
	ModelName    "2887"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "Radeon Mobility X1400"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
Just looking back at that, the "Driver radeon" line looks a bit suspicious, but I don't know if that could be related.

Next, for the ACPI.

Code:
$ lsmod | grep think
thinkpad_acpi          61184  0
rfkill                 12184  2 thinkpad_acpi
led_class               7684  1 thinkpad_acpi
nvram                  11660  1 thinkpad_acpi
hwmon                   6300  2 thinkpad_acpi,thermal_sys
Code:
$ ls -l /proc/acpi/
total 0
dr-xr-xr-x 3 root root 0 2008-12-16 16:21 ac_adapter/
dr-xr-xr-x 3 root root 0 2008-12-16 16:21 battery/
dr-xr-xr-x 5 root root 0 2008-12-16 16:21 button/
-r-------- 1 root root 0 2008-12-16 16:21 dsdt
dr-xr-xr-x 3 root root 0 2008-12-16 16:21 embedded_controller/
-r-------- 1 root root 0 2008-12-16 08:27 event
-r-------- 1 root root 0 2008-12-16 16:21 fadt
dr-xr-xr-x 2 root root 0 2008-12-16 16:21 ibm/
-r--r--r-- 1 root root 0 2008-12-16 16:21 info
dr-xr-xr-x 3 root root 0 2008-12-16 16:21 power_resource/
dr-xr-xr-x 4 root root 0 2008-12-16 16:21 processor/
-rw-r--r-- 1 root root 0 2008-12-16 16:21 sleep
dr-xr-xr-x 4 root root 0 2008-12-16 16:21 thermal_zone/
dr-xr-xr-x 4 root root 0 2008-12-16 16:21 video/
-rw-r--r-- 1 root root 0 2008-12-16 16:21 wakeup
Code:
$ ls -l /proc/acpi/ibm
total 0
-rw-r--r-- 1 root root 0 2008-12-16 16:22 beep
-rw-r--r-- 1 root root 0 2008-12-16 16:22 bluetooth
-rw-r--r-- 1 root root 0 2008-12-16 16:22 cmos
-rw-r--r-- 1 root root 0 2008-12-16 16:22 driver
-rw-r--r-- 1 root root 0 2008-12-16 16:22 fan
-rw-r--r-- 1 root root 0 2008-12-16 16:22 hotkey
-rw-r--r-- 1 root root 0 2008-12-16 16:22 led
-rw-r--r-- 1 root root 0 2008-12-16 16:22 light
-rw-r--r-- 1 root root 0 2008-12-16 16:22 thermal
-rw-r--r-- 1 root root 0 2008-12-16 16:22 video
-rw-r--r-- 1 root root 0 2008-12-16 16:22 volume
Code:
$ cat /proc/acpi/ibm/hotkey
status:         enabled
mask:           0x008c7fff
commands:       enable, disable, reset, <mask>
So, everything I am expecting to see is there, yet the keys, lid close events, etc., although registered do nothing.
 
Old 12-16-2008, 03:43 PM   #9
BCarey
Senior Member
 
Registered: Oct 2005
Location: New Mexico
Distribution: Slackware
Posts: 1,455

Rep: Reputation: Disabled
Regarding your mouse problem, what does "cat /proc/bus/input/devices" show? If you issue (as root) "rmmod psmouse" followed by "modprobe psmouse" does it work then (you'll probably need to restart X)?

Brian

Last edited by BCarey; 12-16-2008 at 03:46 PM.
 
Old 12-16-2008, 03:51 PM   #10
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Original Poster
Rep: Reputation: 31
Thanks for the reply. Unfortunately, unloading and re-loading the module didn't work. Here is the output you requested.

Code:
# cat /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0011 Vendor=0001 Product=0001 Version=ab54
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=046d Product=c00f Version=0110
N: Name="Logitech USB-PS/2 Optical Mouse"
P: Phys=usb-0000:00:1d.0-2/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
U: Uniq=
H: Handlers=mouse1 event2
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
U: Uniq=
H: Handlers=event4
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=/video/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/device:07/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=3
B: KEY=3f000b 0 0 0 0 0 0 0

I: Bus=0019 Vendor=17aa Product=5054 Version=4101
N: Name="ThinkPad Extra Buttons"
P: Phys=thinkpad_acpi/input0
S: Sysfs=/devices/virtual/input/input9
U: Uniq=
H: Handlers=kbd event9
B: EV=33
B: KEY=18840000 0 2 100100 0 0 0 1101b 2005 0 1004000 e0000 0 0 0
B: MSC=10
B: SW=8

I: Bus=0011 Vendor=0002 Product=0007 Version=81b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input11
U: Uniq=
H: Handlers=mouse2 event8
B: EV=b
B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
B: ABS=11000003

I: Bus=0011 Vendor=0002 Product=000a Version=0000
N: Name="TPPS/2 IBM TrackPoint"
P: Phys=synaptics-pt/serio0/input0
S: Sysfs=/devices/platform/i8042/serio1/serio3/input/input12
U: Uniq=
H: Handlers=mouse3 event10
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
 
Old 12-16-2008, 03:56 PM   #11
BCarey
Senior Member
 
Registered: Oct 2005
Location: New Mexico
Distribution: Slackware
Posts: 1,455

Rep: Reputation: Disabled
In the ServerLayout section of your xorg.conf you are still using the generic mouse identified as "Mouse0". You need to change it to:
Code:
InputDevice    "Synaptics Touchpad" "CorePointer"
Brian
 
Old 12-16-2008, 04:10 PM   #12
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Original Poster
Rep: Reputation: 31
Quote:
Originally Posted by BCarey View Post
In the ServerLayout section of your xorg.conf you are still using the generic mouse identified as "Mouse0". You need to change it to:
Code:
InputDevice    "Synaptics Touchpad" "CorePointer"
Brian
Brilliant. Scrolling is now working with the touchpad (and not broken on my USB mouse either). Button 2 and 3 tapping are not working yet, but button one tapping is.

Any thoughts on the buttons or my ACPI issues?
 
Old 12-16-2008, 05:48 PM   #13
BCarey
Senior Member
 
Registered: Oct 2005
Location: New Mexico
Distribution: Slackware
Posts: 1,455

Rep: Reputation: Disabled
Hopefully someone who understands better will come along for the acpi stuff, but in the meantime: What do you have in your /etc/acpi directory? You need to set up an events directory which calls scripts located in an action directory.

Brian
 
Old 12-16-2008, 06:08 PM   #14
statguy
Member
 
Registered: Sep 2004
Location: Ontario, Canada
Distribution: Slackware 13.37, 12.2
Posts: 320

Original Poster
Rep: Reputation: 31
Here is the requested directory listing.

Code:
# ls /etc/acpi/
acpi_handler.sh*  events/
It is clearly quite empty. None of the stuff I've read yet has mentioned a need for manual configuration there.
 
Old 12-16-2008, 06:19 PM   #15
BCarey
Senior Member
 
Registered: Oct 2005
Location: New Mexico
Distribution: Slackware
Posts: 1,455

Rep: Reputation: Disabled
You might check http://rlworkman.net/conf/acpi/ and http://dotimes.com/articles/t61-slac...kpad-acpi.html for some examples of what to put in your /etc/acpi directory.

Brian
 
  


Reply

Tags
acpi, hibernate, keyboard, shortcuts, suspend, t60, thinkpad


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slackware 11.0 Install/confg Issues midas Linux - Laptop and Netbook 2 04-06-2007 09:42 AM
Slackware 10 Install Issues GT_Onizuka Slackware 5 09-04-2004 05:12 PM
mysql++ install issues on slackware 9 compupurdy Linux - Software 2 01-12-2004 08:44 PM
New to Slack, lots of niggly problems. BongFish Slackware 9 09-22-2003 08:15 AM
slackware 9 install issues AlteZza2k2 Linux - Software 4 09-11-2003 03:27 PM


All times are GMT -5. The time now is 01:13 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration