LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Slackware (http://www.linuxquestions.org/questions/slackware-14/)
-   -   10.1 some errors after power outage (http://www.linuxquestions.org/questions/slackware-14/10-1-some-errors-after-power-outage-380022/)

future assassin 11-04-2005 06:15 PM

10.1 some errors after power outage
 
I had a power outage a few days ago and started having these errors on my 10.1 box. Any suggestions? I have pnp aware OS disabled in BIOS.

Code:

Nov  4 16:01:36 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/pciehp.o.                                              gz: init_module: No such device
Nov  4 16:01:36 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/pciehp.o.                                              gz: Hint: insmod errors can be caused by incorrect module parameters, including                                              invalid IO or IRQ parameters.      You may find more information in syslog or t                                              he output from dmesg
Nov  4 16:01:36 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/pciehp.o.                                              gz: insmod pciehp failed
Nov  4 16:01:36 ano kernel: shpchp: shpc_init : shpc_cap_offset == 0
Nov  4 16:01:36 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/shpchp.o.                                              gz: init_module: No such device
Nov  4 16:01:36 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/shpchp.o.                                              gz: Hint: insmod errors can be caused by incorrect module parameters, including                                              invalid IO or IRQ parameters.      You may find more information in syslog or t                                              he output from dmesg
Nov  4 16:01:36 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/shpchp.o.                                              gz: insmod shpchp failed
Nov  4 16:01:37 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/pciehp.o.                                              gz: init_module: No such device
Nov  4 16:01:37 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/pciehp.o.                                              gz: Hint: insmod errors can be caused by incorrect module parameters, including                                              invalid IO or IRQ parameters.      You may find more information in syslog or t                                              he output from dmesg
Nov  4 16:01:37 ano insmod: /lib/modules/2.4.29/kernel/drivers/hotplug/pciehp.o.                                              gz: insmod pciehp failed

This is from dmesg

Code:

Linux version 2.4.29 (root@midas) (gcc version 3.3.4) #6 Thu Jan 20 16:30:37 PST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
 BIOS-e820: 000000001eff0000 - 000000001eff8000 (ACPI data)
 BIOS-e820: 000000001eff8000 - 000000001f000000 (ACPI NVS)
 BIOS-e820: 00000000ffef0000 - 00000000fff00000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
495MB LOWMEM available.
On node 0 totalpages: 126960
zone(0): 4096 pages.
zone(1): 122864 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=308
Initializing CPU#0
Detected 1002.292 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1998.84 BogoMIPS
Memory: 499140k/507840k available (1831k kernel code, 8312k reserved, 607k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU:    After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:            Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU                1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9f8, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS5595 [1039/0008] at 00:01.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xe0000000, mapped to 0xdf80d000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=9
vesafb: protected mode interface info at cbd3:0008
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS630 ATA 66 controller
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E030L0, ATA DISK drive
blk: queue c03ad460, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63, UDMA(33)
Partition check:
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
  8regs    :  1659.200 MB/sec
  32regs    :  956.800 MB/sec
  pIII_sse  :  2346.400 MB/sec
  pII_mmx  :  2240.400 MB/sec
  p5_mmx    :  2337.200 MB/sec
raid5: using function: pIII_sse (2346.400 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Adding Swap: 1502036k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 424M
agpgart: Detected SiS 630 chipset
agpgart: AGP aperture is 64M @ 0xf4000000
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Found IRQ 11 for device 00:09.0
tulip0: no phy info, aborting mtable build
eth0: Macronix 98715 PMAC rev 37 at 0xde00, 00:80:C6:EC:60:5F, IRQ 11.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 19:56:21 Jan 20 2005
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver


egag 11-04-2005 06:21 PM

do you have a pci-express card ?
if not, add " shpchp " and " pciehp " to /etc/hotplug/blacklist.
then those messages should be gone.

egag

future assassin 11-04-2005 06:27 PM

Quote:

Originally posted by egag
do you have a pci-express card ?
if not, add " shpchp " and " pciehp " to /etc/hotplug/blacklist.
then those messages should be gone.

egag

No I dont. Will try to hotplug blacklist. Any idea why this would start appearing after the crash?


Thanks
Arek

egag 11-04-2005 06:33 PM

no idea.
hotplug tries to load those modules, but there's no hardware.
i don't think it's related to a crash.

maybe you installed some new hardware lately ?
else you should have had those messages before the crash i guess.

egag


All times are GMT -5. The time now is 10:11 AM.