Linux - Embedded & Single-board computerThis forum is for the discussion of Linux on both embedded devices and single-board computers (such as the Raspberry Pi, BeagleBoard and PandaBoard). Discussions involving Arduino, plug computers and other micro-controller like devices are also welcome.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
Hi currently I'm trying to interface an imu sensor stick - https://www.sparkfun.com/products/10724 to an embeded system(odroid-x) running on ubuntu 12.04 ,3.6.0 kernel .I had read before that I will need to install a I2C driver to allow this interface and wonder how I can do that.Many thanks inadvance
Moved: This thread is more suitable in <Linux - Embedded & Single-board computer> and has been moved accordingly to help your thread/question get the exposure it deserves.
Hi and had installed the lm sensor but when i tried to sudo sensors-detect , /sys/bus/pci/devices: No such file or directory at /usr/sbin/sensors-detect line 2900 was shown anyone know how I can fix this problem?
OK, to get i2c to load with system start, add the module name to the list in,
/etc/modprobe.preload
Code:
# /etc/modprobe.preload: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a `#', and everything on the line after them are ignored.
# this file is for module-init-tools (kernel 2.5 and above) ONLY
# for old kernel use /etc/modules
max6650
#psmouse
snd_usb_audio
snd_seq_oss
it87
rfcomm
gpm-data
evdev
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.