LinuxQuestions.org
LinuxAnswers - the LQ Linux tutorial section.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Slackware
User Name
Password
Slackware This Forum is for the discussion of Slackware Linux.

Notices

Reply
 
Search this Thread
Old 10-10-2009, 07:10 AM   #1
dolphin77
Member
 
Registered: May 2009
Posts: 200

Rep: Reputation: 54
Radeon kms works!


At first I was very upset with ATI Radeon support in linux. But after a little bit of magic - it works!!! And the performance is really good.

Let me share my experience.

1) we need kernel 2.6.32-rc3.
I just got config-general-2.6.30.5 from /testing. Made oldconfig. Then I enabled radeon_kms from Device Drivers/Staging

2) because I use LVM and luks, the driver failed to initialize properly during boot. This happens because driver initialises before root is mounted and cannot load proper firmware. Thus I had to blackist driver in /etc/modprobe.d/blacklist, and load it later (I load it from /etc/rc.modules).

3) we need to make an proper environment for X to work with KMS. We need to build (in this order):
1) libdrm - from git
git clone git://cgit.freedesktop.org/mesa/drm

configure it with --enable-radeon-experimental-api

2) mesa - from git
git clone git://cgit.freedesktop.org/git/mesa/mesa

do not specify DRI DRIVERS it will automaticaly detect.
3) xf86-video-ati - from git
git clone git://cgit.freedesktop.org/git/xorg/driver/xf86-video-ati


I use this scripts for that (modified from original .Slackbuilds)

get-libdrm.sh:
Code:
rm -rf libdrm
#git clone git://anongit.freedesktop.org/mesa/drm
git clone git://cgit.freedesktop.org/mesa/drm

#cd drm
#git checkout -t -b master origin/master
#cd ..
# package the source archive and clean up:
( cd drm ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
DATE=$(date +%Y%m%d)
mv drm libdrm-${DATE}_git
tar cjf libdrm-${DATE}_git.tar.bz2 libdrm-${DATE}_git
rm -rf libdrm-${DATE}_git
libdrm.Slackbuild:

Code:
PKGNAM=libdrm
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}       
NUMJOBS=${NUMJOBS:-" -j7 "}
BUILD=${BUILD:-1}          

CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-${PKGNAM}

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "s390" ]; then          
  SLKCFLAGS="-O2"                        
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "x86_64" ]; then        
  SLKCFLAGS="-O2 -fPIC"                  
  LIBDIRSUFFIX="64"                      
fi                                       

rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP           
rm -rf ${PKGNAM}-${VERSION}
tar xvf $CWD/${PKGNAM}-$VERSION.tar.bz2 || exit 1
cd ${PKGNAM}-$VERSION                            

# Make sure ownerships and permissions are sane:
chown -R root:root .                            
find . \                                        
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \                                           
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;                                                             

# Configure:
./autogen.sh
CFLAGS="$SLKCFLAGS" \
./configure \        
  --prefix=/usr \    
  --enable-radeon-experimental-api \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --build=$ARCH-slackware-linux     

# Build and install:
make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1

#cd linux-core
#make $NUMJOBS || make || exit 1
#make install DESTDIR=$PKG || exit 1
#mkdir -p $PKG/lib/modules/`uname -r`/extra/
#cp *.ko $PKG/lib/modules/`uname -r`/extra/ 
#cd ..                                      

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null                

# Compress and link manpages, if any:
if [ -d $PKG/usr/man ]; then
  ( cd $PKG/usr/man
    for manpagedir in $(find . -type d -name "man*") ; do
      ( cd $manpagedir
        for eachpage in $( find . -type l -maxdepth 1) ; do
          ln -s $( readlink $eachpage ).gz $eachpage.gz
          rm $eachpage
        done
        gzip -9 *.?
      )
    done
  )
fi

# Compress info files, if any:
if [ -d $PKG/usr/info ]; then
  ( cd $PKG/usr/info
    rm -f dir
    gzip -9 *
  )
fi

# Add a documentation directory:
mkdir -p $PKG/usr/doc/${PKGNAM}-$VERSION
cp -a \
  README \
  $PKG/usr/doc/${PKGNAM}-$VERSION

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $TMP/package-${PKGNAM}
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz

mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD
get-mesa.sh:
Code:
rm -rf mesa
git clone git://cgit.freedesktop.org/git/mesa/mesa
cd mesa
git checkout -t -b master origin/master
cd ..
# package the source archive and clean up:
( cd mesa ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
DATE=$(date +%Y%m%d)
mv mesa mesa-${DATE}_git
tar cjf mesa-${DATE}_git.tar.bz2 mesa-${DATE}_git
rm -rf mesa-${DATE}_git
mesa.Slackbuild:
Code:
PKGNAM=mesa
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}       
BUILD=${BUILD:-1}                                                                                                             

NUMJOBS=${NUMJOBS:--j8}

CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-mesa

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "x86_64" ]; then        
  SLKCFLAGS="-O2 -fPIC"                  
  LIBDIRSUFFIX="64"                      
else                                     
  SLKCFLAGS="-O2"                        
  LIBDIRSUFFIX=""                        
fi                                       

rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP           
rm -rf mesa-${VERSION}
tar xvf $CWD/mesa-${VERSION}.tar.bz2 || exit 1
cd mesa-$VERSION                              

# Make sure ownerships and permissions are sane:
chown -R root:root .                            
find . \                                        
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \                                           
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;                                                             


./autogen.sh

CFLAGS="$SLKCFLAGS" \
./configure \        
  --prefix=/usr \    
  --sysconfdir=/etc \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --mandir=/usr/man \               
  --docdir=/usr/doc/mesa-$VERSION \ 
  --with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
  --disable-gallium \                                            
  --enable-debug \                                               
  --build=$ARCH-slackware-linux                                  

# Nobody else is enabling this.  Seems like it's asking for trouble.
#  --enable-xcb                                                     

make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1

# Install gears and glinfo manually, and make symlinks from the names
# of the deprecated similar programs to reduce confusion:            
mkdir -p $PKG/usr/bin                                                
cp -a progs/demos/gears $PKG/usr/bin/gears                           
cp -a progs/demos/glinfo $PKG/usr/bin/glinfo                         
( cd $PKG/usr/bin                                                    
  ln -sf glinfo glxinfo                                              
  ln -sf gears glxgears                                              
)                                                                    

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null

# Compress and link manpages, if any:
if [ -d $PKG/usr/man ]; then
  ( cd $PKG/usr/man
    for manpagedir in $(find . -type d -name "man*") ; do
      ( cd $manpagedir
        for eachpage in $( find . -type l -maxdepth 1) ; do
          ln -s $( readlink $eachpage ).gz $eachpage.gz
          rm $eachpage
        done
        gzip -9 *.?
      )
    done
  )
fi

# Compress info files, if any:
if [ -d $PKG/usr/info ]; then
  ( cd $PKG/usr/info
    rm -f dir
    gzip -9 *
  )
fi

mkdir -p $PKG/usr/doc/mesa-$VERSION/html
cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/mesa-$VERSION
rm -f docs/relnotes*.html docs/RELNOTES*
cp -a docs/*.html $PKG/usr/doc/mesa-$VERSION/html

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD
get-xf86-video-ati:
Code:
rm -rf xf86-video-ati
git clone git://cgit.freedesktop.org/git/xorg/driver/xf86-video-ati
cd xf86-video-ati
git checkout -t -b master origin/master
cd ..
# package the source archive and clean up:
( cd xf86-video-ati ; find . -type d -name .git -exec rm -rf {} \; 2> /dev/null )
DATE=$(date +%Y%m%d)
mv xf86-video-ati xf86-video-ati-${DATE}_git
tar cjf xf86-video-ati-${DATE}_git.tar.bz2 xf86-video-ati-${DATE}_git
rm -rf xf86-video-ati-${DATE}_git
xf86-video-ati.SlackBuild:
Code:
PKGNAM=xf86-video-ati
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}       
BUILD=${BUILD:-1}          

# Be sure this list is up-to-date:

NUMJOBS=${NUMJOBS:--j8}
CWD=$(pwd)             
TMP=${TMP:-/tmp}       
PKG=$TMP/package-xf86-video-ati

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""                        
elif [ "$ARCH" = "x86_64" ]; then        
  SLKCFLAGS="-O2 -fPIC"                  
  LIBDIRSUFFIX="64"                      
else                                     
  SLKCFLAGS="-O2"                        
  LIBDIRSUFFIX=""                        
fi                                       

rm -rf $PKG
mkdir -p $TMP $PKG
cd $TMP           
rm -rf xf86-video-ati-${VERSION}
tar xvf $CWD/xf86-video-ati-${VERSION}.tar.bz2 || exit 1
cd xf86-video-ati-$VERSION

# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;

./autogen.sh

CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --sysconfdir=/etc \
  --build=$ARCH-slackware-linux

# Nobody else is enabling this.  Seems like it's asking for trouble.
#  --enable-xcb

make $NUMJOBS
make install DESTDIR=$PKG

mkdir -p $PKG/usr/doc/xf86-video-ati-$VERSION/html
cp -a COPYING docs/relnotes-$VERSION.html $PKG/usr/doc/xf86-video-ati-$VERSION
rm -f docs/relnotes*.html docs/RELNOTES*
cp -a docs/*.html $PKG/usr/doc/xf86-video-ati-$VERSION/html

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD


The performance is really goot. Switching between VT and X is momental. All the GL staff works.

Hope this could be useful for anyone.

Last edited by dolphin77; 10-10-2009 at 03:20 PM. Reason: better looking of posted information
 
Old 10-10-2009, 10:03 AM   #2
BrZ
Member
 
Registered: Apr 2009
Distribution: Slackware
Posts: 492

Rep: Reputation: 80
Thanks for sharing =]
 
Old 10-10-2009, 10:21 AM   #3
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: SlackwareŽ
Posts: 11,143
Blog Entries: 3

Rep: Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406
Hi,

Yes, thanks for sharing.

I would suggest that you place your lists, SlackBuilds and/or long data within the vbcode tags # or quote with identification within. A experienced user will be able to pick things out but the novice will not. Plus it makes things cleaner therefore easier to read.
 
Old 10-10-2009, 11:18 AM   #4
kukibl
Member
 
Registered: Jun 2008
Distribution: Slackware64
Posts: 68

Rep: Reputation: 20
Thank you very much, specially for SlackBuilds! I was looking for them 2 days ago, had plans to experiment with KMS. No need for that now, since you already did all hard work.
 
Old 10-10-2009, 11:51 AM   #5
w1k0
Senior Member
 
Registered: May 2008
Location: Poland
Distribution: Slackware, Mint
Posts: 1,240

Rep: Reputation: 196Reputation: 196
Thank you dolphin77 for your scripts. Thanks to them I was able to solve my problem with Random system hang ups as well as the last of my Three MPlayer and Xine issues.
 
Old 10-10-2009, 03:43 PM   #6
dolphin77
Member
 
Registered: May 2009
Posts: 200

Original Poster
Rep: Reputation: 54
Just to add a little bit to the above.

KDE desktop effects - works great

Big TFT Sony TV (47") connected via VGA cable - detected automaticaly - works great

native resolution work and looks great in "text" console mode

output from dmesg:
Code:
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
radeon 0000:01:00.0: setting latency timer to 64
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0x88020000
[drm] register mmio size: 65536
ATOM BIOS: SonyM750
[drm] Clocks initialized !
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone  kernel: Available graphics memory: 1027268 kiB.
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RV620 CP Microcode
platform radeon_cp.0: firmware: requesting radeon/RV620_pfp.bin
platform radeon_cp.0: firmware: requesting radeon/RV620_me.bin
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] ring test succeeded in 0 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] radeon: kernel modesetting successfully initialized.
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   VGA
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm]   LVDS
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 2:
[drm]   DVI-D
[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY
[drm] fb mappable at 0x80141000
[drm] vram apper at 0x80000000
[drm] size 4096000
[drm] fb depth is 24
[drm]    pitch is 5120
X.org.log:
Code:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux darkstar 2.6.32-rc3 #4 SMP Fri Oct 9 19:50:27 EEST 2009 x86_64
Build Date: 03 August 2009  07:39:15PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 10 22:58:37 2009
(II) Loader magic: 0x3d20
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:95c4:104d:9033 rev 0, Mem @ 0x80000000/134217728, 0x88020000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default ati Device 0"
		Driver	"ati"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default ati Screen 0"
		Device	"Builtin Default ati Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default fbdev Device 0"
		Driver	"fbdev"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default fbdev Screen 0"
		Device	"Builtin Default fbdev Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default ati Screen 0"
		Screen	"Builtin Default vesa Screen 0"
		Screen	"Builtin Default fbdev Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	built-ins
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib64/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 6.12.99
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib64/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 6.12.99
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib64/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
	ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
	ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI RS880
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) [KMS] Kernel modesetting enabled.
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): Creating default Display subsection in Screen section
	"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (ChipID = 0x95c4)
(II) RADEON(0): PCIE card detected
(II) RADEON(0): KMS Color Tiling: disabled
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): mem size init: gart size :20000000 vram size: s:8000000 visible:7c00000
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib64/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) RADEON(0): [DRI2] Setup complete
(II) RADEON(0): Front buffer size: 4000K
(II) RADEON(0): Remaining VRAM size (used for pixmaps): 122944K
(==) RADEON(0): Backing store disabled
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib64/xorg/modules/dri/r600_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
 
Old 10-12-2009, 02:10 AM   #7
rvdboom
Member
 
Registered: Jul 2007
Distribution: Slackware
Posts: 183

Rep: Reputation: 23
It's not just KMS that's starting to run with these, but even more importantly 3D for r600/r700 chips. I have an integrated motherboard with, I believe, RS780 chip, and KWin Desktop effects now works smoothly in OpenGL. On the whole, it's quite stable for me right now and if performance can certainly be improved, it's already enough for a composited desktop.
 
Old 11-13-2009, 05:24 AM   #8
dolphin77
Member
 
Registered: May 2009
Posts: 200

Original Poster
Rep: Reputation: 54
Hello there.

I figured out that with kernel 2.6.32-rc5, rc6 there were a lot of "noise" produced in X under KDE. So for a while I had to stick to -rc3. But today 2.6.32-rc7 was released. It looks like they fixed this issue with "noise production". There are also a lot of various improvements for radeon driver. So for thous who are not afraid of bleeding edge, and who wants to get reasonable performance of radeon opensource driver, there is a good reason to update.

best regards,
Vladimir
 
Old 11-13-2009, 06:53 AM   #9
rvdboom
Member
 
Registered: Jul 2007
Distribution: Slackware
Posts: 183

Rep: Reputation: 23
Nice! I was thinking it came from Mesa or the xfree86-video-ati driver. :-)
Will compile it tonight.
 
Old 11-13-2009, 10:50 AM   #10
octoberblu3
Member
 
Registered: Oct 2005
Distribution: Slackware64-current
Posts: 67

Rep: Reputation: 22
Quote:
Originally Posted by rvdboom View Post
Nice! I was thinking it came from Mesa or the xfree86-video-ati driver. :-)
Will compile it tonight.
Well, to get the whole thing working, you need the latest kernel 2.6.32-rc7, and a couple things from git repositories.

libdrm from git://anongit.freedesktop.org/mesa/drm
compile like the Slackware source SlackBuild with an extra option on configure: --enable-radeon-experimental-api
The extra flag should give you another library libdrm_radeon

xf86-video-ati from git://anongit.freedesktop.org/xorg/driver/xf86-video-ati
You can either hack out most of the unneeded stuff from the x11.SlackBuild script, or just make a complete new one from piecing together the configure calls and the like.
The configure should find the new library libdrm_radeon automatically.

mesa from git://anongit.freedesktop.org/mesa/mesa
Using the stock source SlackBuild, make sure to add r600 to the list of dri drivers to build. The configure script should also find libdrm_radeon automatically.

I copied and modified the original source SlackBuilds to just rsync from the git directory instead of untarring a source tarball.

rsync -aC $CWD/drm/ $PKGNAM-$VERSION

One last thing: if you use an initrd to boot, blacklist the radeon module from automatically loading (unless you build in the radeon module and firmware you need.) Manually load it in later (perhaps in rc.local) with a call like /sbin/modprobe radeon modeset=1

Good luck.
 
Old 11-13-2009, 03:38 PM   #11
agentdcooper
Member
 
Registered: Aug 2005
Distribution: Slackware
Posts: 35

Rep: Reputation: 15
thanks alot for posting this, I've been struggling with intel drivers, but recently noticed there is KMS option for the intel video options in a kernel recompile recently. I am trying some things out with your scripts here + some tweaks, trying to get it working on my ancient intel g45 hardware. anyways, I am in no way trying to thread-jack here, simply want to thank you publicly for posting this, it is very helpful to me in my troubleshooting!

peace
 
Old 11-13-2009, 03:43 PM   #12
dolphin77
Member
 
Registered: May 2009
Posts: 200

Original Poster
Rep: Reputation: 54
Quote:
Originally Posted by octoberblu3 View Post
Well, to get the whole thing working, you need the latest kernel 2.6.32-rc7, and a couple things from git repositories.

libdrm from git://anongit.freedesktop.org/mesa/drm
compile like the Slackware source SlackBuild with an extra option on configure: --enable-radeon-experimental-api
The extra flag should give you another library libdrm_radeon

xf86-video-ati from git://anongit.freedesktop.org/xorg/driver/xf86-video-ati
You can either hack out most of the unneeded stuff from the x11.SlackBuild script, or just make a complete new one from piecing together the configure calls and the like.
The configure should find the new library libdrm_radeon automatically.

mesa from git://anongit.freedesktop.org/mesa/mesa
Using the stock source SlackBuild, make sure to add r600 to the list of dri drivers to build. The configure script should also find libdrm_radeon automatically.

I copied and modified the original source SlackBuilds to just rsync from the git directory instead of untarring a source tarball.

rsync -aC $CWD/drm/ $PKGNAM-$VERSION

One last thing: if you use an initrd to boot, blacklist the radeon module from automatically loading (unless you build in the radeon module and firmware you need.) Manually load it in later (perhaps in rc.local) with a call like /sbin/modprobe radeon modeset=1

Good luck.
Sorry I didn't get it. Is there any principal difference from post#1 in this thread?
 
Old 11-15-2009, 06:46 PM   #13
dolphin77
Member
 
Registered: May 2009
Posts: 200

Original Poster
Rep: Reputation: 54
An updated info& scripts:

1) KERNEL PART:

In order to make this work, we will need a kernel 2.6.32-rc7 (or later).
It should be compiled with this options in .config:
Code:
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
If you make menuconfig, this should be found here:
Code:
Device Drivers ---> Graphics support ---> <M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support ---> <M>   ATI Radeon

Device Drivers --->[*] Staging drivers  --->[*]     Enable modesetting on radeon by default
next step is to blacklist radeon frame buffer and radeon modules. We need to do this to avoid firmware initialization problem, if it is not accessible before root FS is mounted. This should be added to /etc/modprobe.d/blacklist.conf:
Code:
blacklist radeonfb
blacklist radeon
And then we will load module from /etc/rc.d/rc.modules:
Code:
/sbin/modprobe radeon
2) Libdrm, Mesa and xf86-video-ati from git.

In order to get as much as we can from our ATIs with opensource drivers, it is reasonable to play with GIT version of this packages.


Code:
# git clone git://cgit.freedesktop.org/mesa/drm
# mv drm libdrm
# git clone git://cgit.freedesktop.org/git/mesa/mesa
# git clone git://cgit.freedesktop.org/git/xorg/driver/xf86-video-ati
This should be done once and after this you could use this scripts, which will update git repositories, and build packages with -date_git version.
libdrm.SlackBuild
Code:
#!/bin/sh

PKGNAM=libdrm
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}
NUMJOBS=${NUMJOBS:-" -j7 "}
BUILD=${BUILD:-1}

CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-${PKGNAM}

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "s390" ]; then
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fPIC"
  LIBDIRSUFFIX="64"
fi

rm -rf $PKG
mkdir -p $TMP $PKG
cd libdrm
git pull
git checkout

# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;

make clean
# Configure:
./autogen.sh

CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --enable-radeon-experimental-api \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --build=$ARCH-slackware-linux

# Build and install:
make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null

mkdir -p $PKG/install

cd $TMP/package-${PKGNAM}
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz

mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD
mesa.SlackBuild (to save time I build only r600 driver. if you need different one, change DRI_DRIVERS accordingly, or if you want to build all the drivers, remove this line: ( --with-dri-drivers="$DRI_DRIVERS" \)and all the drivers will be built):
Code:
#!/bin/sh

PKGNAM=mesa
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}
BUILD=${BUILD:-1}

# Be sure this list is up-to-date:
DRI_DRIVERS="r600,swrast"

NUMJOBS=${NUMJOBS:--j8}

CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-mesa

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fPIC"
  LIBDIRSUFFIX="64"
else
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
fi

rm -rf $PKG
mkdir -p $TMP $PKG
cd mesa
git pull
git checkout

# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
make clean

./autogen.sh

CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --sysconfdir=/etc \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --mandir=/usr/man \
  --docdir=/usr/doc/mesa-$VERSION \
  --with-dri-driverdir=/usr/lib${LIBDIRSUFFIX}/xorg/modules/dri \
  --with-dri-drivers="$DRI_DRIVERS" \ 
  --disable-gallium \
  --enable-debug \
  --build=$ARCH-slackware-linux

make $NUMJOBS || make || exit 1
make install DESTDIR=$PKG || exit 1

# Install gears and glinfo manually, and make symlinks from the names
# of the deprecated similar programs to reduce confusion:
mkdir -p $PKG/usr/bin
cp -a progs/demos/gears $PKG/usr/bin/gears
cp -a progs/demos/glinfo $PKG/usr/bin/glinfo
( cd $PKG/usr/bin
  ln -sf glinfo glxinfo
  ln -sf gears glxgears
)

# Strip binaries:
find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null

mkdir -p $PKG/install

cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD
xf86-video-ati.SlackBuild
Code:
#!/bin/sh

PKGNAM=xf86-video-ati
VERSION=$(date +%Y%m%d)_git
ARCH=${ARCH:-x86_64}
BUILD=${BUILD:-1}

NUMJOBS=${NUMJOBS:--j8}
CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-xf86-video-ati

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fPIC"
  LIBDIRSUFFIX="64"
else
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
fi

rm -rf $PKG
mkdir -p $TMP $PKG
cd $PKGNAM
git pull
git checkout

# Make sure ownerships and permissions are sane:
chown -R root:root .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
make clean
./autogen.sh
CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --sysconfdir=/etc \
  --build=$ARCH-slackware-linux

make $NUMJOBS 
make install DESTDIR=$PKG 

mkdir -p $PKG/install

cd $PKG
/sbin/makepkg -l y -c n $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz
mv $TMP/${PKGNAM}-$VERSION-$ARCH-$BUILD.txz  $CWD
Something like this should do it all together (lets call this build_all.sh):
Code:
./libdrm.SlackBuild && upgradepkg --reinstall libdrm-`date +%Y%m%d`_git-x86_64-1.t?z
./mesa.SlackBuild && upgradepkg --reinstall mesa-`date +%Y%m%d`_git-x86_64-1.t?z
./xf86-video-ati.SlackBuild && upgradepkg --reinstall xf86-video-ati-`date +%Y%m%d`_git-x86_64-1.t?z

Last edited by dolphin77; 11-18-2009 at 04:27 PM.
 
Old 11-18-2009, 01:11 PM   #14
onebuck
Moderator
 
Registered: Jan 2005
Location: Midwest USA, Central Illinois
Distribution: SlackwareŽ
Posts: 11,143
Blog Entries: 3

Rep: Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406Reputation: 1406
Hi,

I've been working on this Dell Inspiron 1501 problem for ages now.
I've compiled the 2.6.32-rc7 kernel with your suggested settings.

Followed the Thread/posts, especially #13. I used the recipe to the 'T'. I did include all drivers. Still no joy!

Code:
lspci -vv;

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] (prog-if 00 [VGA controller])
Code:
xorg.log what it should be;

Information		ATI Radeon XPRESS 200M 5955 (PCIE)
Whenever I have the new kernel 2.6.32-rc7 running with your cookbook technique I get a rasterized screen. The 'blacklist radeonfb & blacklist radeon' have been included in the 'blacklist.conf' but invoking 'modprobe radeon' gets a raster screen. Must re-boot.

Heads UP: I noticed in the script '/Soft/dri' that if you setup the directory some users may not be aware that the rest of the scripts should be in that directory. No checking.

I reverted to my original kernel, packages and configurations. I think that a separate install will be easier to see if this can be worked out.
 
Old 11-18-2009, 04:40 PM   #15
dolphin77
Member
 
Registered: May 2009
Posts: 200

Original Poster
Rep: Reputation: 54
Quote:
Originally Posted by onebuck View Post
Hi,

I've been working on this Dell Inspiron 1501 problem for ages now.
I've compiled the 2.6.32-rc7 kernel with your suggested settings.

Followed the Thread/posts, especially #13. I used the recipe to the 'T'. I did include all drivers. Still no joy!

Code:
lspci -vv;

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] (prog-if 00 [VGA controller])
Code:
xorg.log what it should be;

Information		ATI Radeon XPRESS 200M 5955 (PCIE)
Whenever I have the new kernel 2.6.32-rc7 running with your cookbook technique I get a rasterized screen. The 'blacklist radeonfb & blacklist radeon' have been included in the 'blacklist.conf' but invoking 'modprobe radeon' gets a raster screen. Must re-boot.

Heads UP: I noticed in the script '/Soft/dri' that if you setup the directory some users may not be aware that the rest of the scripts should be in that directory. No checking.

I reverted to my original kernel, packages and configurations. I think that a separate install will be easier to see if this can be worked out.
Hi.

First of all I should say that I am not an expert in graphics, programming and etc. I just spent few crazy weeks with my laptop not working properly (it has ATI Mobility Radeon HD 3400 - R600 chip). I almost got a nail in my head. But after a lot of googling, reading and etc I finally found workaround for my card. A little bit later all the required things were included in the development version of the kernel. That what I was trying to report and to share with the community. And I think that if it will help at least to one person, my target is reached. If someone spent a lot of time on figuring out something - why should others do the same? they can do something else.

I do not know what kind of chipset is used in your card and the level of its support in kernel driver. But I do not think this is a very new card. And I think it should be supported. What you still can try to do is to remove all the vga options from lilo. As I understand,there could be interference between "old" framebuffers and the new features of radeon driver. Try also too look on phoronix forums.

PS I removed this /Soft/dri from the above. You right it can confuse people.

Good luck
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Linux KMS Intel 865G: Hacking KMS to use vesa... or disable hardware acceleration eantoranz Linux - Hardware 1 08-01-2009 12:58 PM
KMS with radeon gives garbled screen with x onlyolli Linux - Software 0 06-29-2009 04:14 PM
LXer: TTM, Radeon KMS Support Goes Into Linux 2.6.31 LXer Syndicated Linux News 0 06-17-2009 06:11 PM
LXer: The KMS, Plymouth Experience In Fedora 10 LXer Syndicated Linux News 0 11-28-2008 02:40 AM
Radeon 9600 Pro 2.6.6 Works, 2.6.7 doesn't AlgebraicSpore Linux - Hardware 4 07-14-2004 05:36 PM


All times are GMT -5. The time now is 12:33 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration