| gillnaldo |
01-22-2007 11:43 AM |
Redhat AS4 in large storage (~6 TB)
Did any one format large disk on Redhat AS4 Update 4?
I need to create large file system on Dell PowerVault MD1000 (total capacity around 6 TB). I try to use ext3 but it's seem redhat kernel support only 2 TB (in redhat website shown support 8 TB). When I format and mount it. The log file shown problem like
Code:
very big device. try to use READ CAPACITY(16).
So, I try to compile kernel for support "reiserfs" partition. But it's seem redhat AS 4 didn't support it.
Here is some information on my server
Code:
[root@gbl2 /var/log]# fdisk -l /dev/sdb
Disk /dev/sdb: 5994.7 GB, 5994700603392 bytes
255 heads, 63 sectors/track, 728814 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 194116 1559231127+ 83 Linux
[root@gbl2 /var/log]# mkfs.ext3 -b 4096 -i 65536 -j -m 1 -O dir_index -L /md1000-2 -v /dev/sdb1
[root@gbl2 /var/log]# mount /dev/sdb1 /mnt/data/
[root@gbl2 /var/log]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 66G 19G 44G 31% /
/dev/sda1 99M 17M 77M 18% /boot
none 506M 0 506M 0% /dev/shm
/dev/sdb1 1.5T 77M 1.4T 1% /mnt/data
What should I do ? :confused:
Code:
[root@gbl2 /boot]# dmesg
Linux version 2.6.9-prep (root@storage.ksc.net) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Fri Jan 19 17:56:40 EST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003ffcfc00 (ACPI data)
BIOS-e820: 000000003ffcfc00 - 000000003ffff000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed13000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
NX (Execute Disable) protection: active
On node 0 totalpages: 262080
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32704 pages, LIFO batch:7
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v002 DELL ) @ 0x000fa030
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000a) @ 0x000fa0a0
ACPI: FADT (v003 DELL PE_SC3 0x00000001 MSFT 0x0100000a) @ 0x000fa188
ACPI: MADT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000a) @ 0x000fa27c
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000a) @ 0x000fa300
ACPI: HPET (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000a) @ 0x000fa350
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000a) @ 0x000fa388
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Enabling APIC mode: Flat. Using 0 I/O APICs
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3ffff000:b0001000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c03ee000 soft=c03ce000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033396k/1048320k available (1876k kernel code, 14220k reserved, 759k data, 184k init, 130816k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2800.582 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 5604.38 BogoMIPS (lpj=2802192)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU0: Physical Processor ID: 0
CPU0: Processor Core ID: 0
CPU0: Initial APIC ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
per-CPU timeslice cutoff: 1468.00 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03ef000 soft=c03cf000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5600.40 BogoMIPS (lpj=2800202)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU1: Physical Processor ID: 0
CPU1: Processor Core ID: 1
CPU1: Initial APIC ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
Total of 2 processors activated (11204.78 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 515k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=8
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PES1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1c.4[B] -> GSI 22 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1c.5[C] -> GSI 23 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
ACPI: PCI interrupt 0000:00:1f.3[B]: no GSI - using IRQ 0
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:04:0e.0[A] -> GSI 18 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 17 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:08:05.0[A] -> GSI 19 (level, low) -> IRQ 225
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1169511765.670:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
Failed to disable AUX port, but continuing anyway... Is this a SiS?
If AUX port is really absent please use the 'i8042.noaux' option.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI - using IRQ 0
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: HL-DT-ST GCR-8240N, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
TCP: Hash tables configured (established 262144 bind 262144)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
ACPI wakeup devices:
PCI0 PES1 PEP0 PXHA PEP1 PEP2 PCIS
Freeing unused kernel memory: 184k freed
SCSI subsystem initialized
Fusion MPT base driver 3.02.62.01rh
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT FC Host driver 3.02.62.01rh
Fusion MPT SPI Host driver 3.02.62.01rh
Fusion MPT SAS Host driver 3.02.62.01rh
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 169
mptbase: Initiating ioc0 bringup
ioc0: SAS1068: Capabilities={Initiator}
scsi0 : ioc0: LSISAS1068, FwRev=00063200h, Ports=1, MaxQ=267, IRQ=169
Vendor: SEAGATE Model: ST373454SS Rev: S411
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
megasas: 00.00.02.03-RH1 Mon Jan 30 16:30:45 PST 2006
megasas: 0x1028:0x0015:0x1028:0x1f01: bus 4:slot 14:func 0
ACPI: PCI interrupt 0000:04:0e.0[A] -> GSI 18 (level, low) -> IRQ 209
scsi1 : LSI Logic SAS based MegaRAID driver
Vendor: DELL Model: MD1000 Rev: A.00
Type: Enclosure ANSI SCSI revision: 05
Vendor: DELL Model: PERC 5/E Adapter Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 05
sdb : very big device. try to use READ CAPACITY(16).
SCSI device sdb: 11708399616 512-byte hdwr sectors (5994701 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb : very big device. try to use READ CAPACITY(16).
SCSI device sdb: 11708399616 512-byte hdwr sectors (5994701 MB)
sdb: asking for cache data failed
sdb: assuming drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 2, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 355 types, 26 bools
security: 55 classes, 22582 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
inserting floppy driver for 2.6.9-prep
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
tg3.c:v3.52-rh (Mar 06, 2006)
ACPI: PCI interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:00.0 to 64
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:15:c5:fb:69:db
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000]
ACPI: PCI interrupt 0000:07:00.0[A] -> GSI 17 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:07:00.0 to 64
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:15:c5:fb:69:dc
eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[1] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000]
hw_random: RNG not detected
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 201
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 201, pci mem f881a000
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 201, io base 0000ace0
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 177, io base 0000acc0
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 0000aca0
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 1-3: new high speed USB device using address 2
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
ACPI: Power Button (FF) [PWRF]
EXT3 FS on sda3, internal journal
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
usb 4-2: new low speed USB device using address 2
input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8190 buckets, 65520 max) - 340 bytes per conntrack
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0344160(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ipmi message handler version 33.13
IPMI System Interface driver version 33.13, KCS version 33.13, SMIC version 33.13, BT version 33.13
ipmi_si: Found SMBIOS-specified state machine at I/O address 0xca8, slave address 0x20
IPMI kcs interface initialized
ipmi device interface version 33.13
eth0: no IPv6 routers present
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8190 buckets, 65520 max) - 340 bytes per conntrack
SELinux: initialized (dev sdb1, type ext2), uses xattr
|
