LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Red Hat
User Name
Password
Red Hat This forum is for the discussion of Red Hat Linux.

Notices



Reply
 
Search this Thread
Old 11-27-2005, 07:40 AM   #1
shen168
LQ Newbie
 
Registered: Nov 2005
Posts: 2

Rep: Reputation: 0
About RHEL3 Software RAID 5 can't boot? (superblock)


Hello,
I have a machine with RHEL3 software RAID5 enabled. After a power failure, the raid wont start, and during booting, this message appears:

-----------------------------------------------------------------------------
Starting up RAID devices : raid5 : failed to run raid set md0
Checking filesystems
/boot : clean, ...
fsck.ext3 : /dev/md0 :
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2 filesystem
(and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock :
e2fsck -b 8193 <device>

Invalid argument while trying to open /dev/md0 [Failed]
-------------------------------------------------------------------------------

In the "repair filesystem" mode, I tried to use "e2fsck /dev/md0" but it gives me the same message.

I don't forget dump the backup superblock.

So now I am confused as to what to do. Is there anyway I can recover the data in my RAID array ? Below is my /etc/raidtab. Any help is greatly appreciated.

----------- /etc/raidtab------------
raiddev /dev/md0
raid-level 5
nr-raid-disks 4
nr-spare-disks 0
chunk-size 32
persistent-superblock 1
parity-algorithm left-symmetric
device /dev/sda5
raid-disk 0
device /dev/sdb1
raid-disk 1
device /dev/sdc1
raid-disk 2
device /dev/sdd1
raid-disk 3

Please help me. My data is very very very important.
Thanks!
 
Old 11-28-2005, 04:52 PM   #2
Finlay
Senior Member
 
Registered: Mar 2003
Location: Seattle
Distribution: Slackware ?-14.1
Posts: 1,029

Rep: Reputation: 47
is this software or hardware raid?
if it is hardware raid, check to see if the raid controller is working properly
 
Old 11-28-2005, 07:43 PM   #3
shen168
LQ Newbie
 
Registered: Nov 2005
Posts: 2

Original Poster
Rep: Reputation: 0
RHEL3 "software" RAID5
 
Old 11-28-2005, 07:46 PM   #4
Finlay
Senior Member
 
Registered: Mar 2003
Location: Seattle
Distribution: Slackware ?-14.1
Posts: 1,029

Rep: Reputation: 47
yeah just noticed that, everyone is entitled to at least one rhetorical question a day.

don't know much about software raid, but google showed me this:
http://www.tldp.org/HOWTO/Software-R...x-HOWTO-4.html
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing RHEL3 Error due to RAID only system Codefire Linux - Hardware 0 10-28-2005 12:21 PM
SCSI RAID not Detected During Installation of RHEL3 ikebbe Linux - Hardware 8 06-30-2005 09:20 AM
Install RHEL3 with WinXP on SCSI RAID 0 ikebbe Linux - Newbie 0 03-21-2005 10:33 AM
boot from software RAID 1 maenho Linux - Software 2 02-20-2005 04:41 AM
Software RAID: consequences of linux autodetect & persistent-superblock with reiserfs cbonar Linux - Hardware 0 01-08-2005 04:43 PM


All times are GMT -5. The time now is 10:05 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration