XF86-Config-4 Help Required
 

Hi
I am having aproblem Getting rid of virtual screen. After many Configs i finally think iam getting closer. Distro is Mandrake10 community ,Radeon 7000ve,Nec v520 Multisync Monitor.My latest config attached. Any Advice would be greatly appreciated. With this config i still have a virtual screen @ 800x600

Thanks
Regards Jeff

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection

Section "DRI"
Mode 0666
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_US"
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
ModelName "NEC MultiSync V520"
HorizSync 31-70
VertRefresh 55-120

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "ATI"
BoardName "ATI Radeon"
Driver "radeon"
Option "DPMS"
EndSection

Section "Screen"

Identifier "Screen 1"
Device "device 1"
Monitor "Monitor 1"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600"
ViewPort 0 0
EndSubsection
DefaultDepth 16
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection

in Section "Screen" you have DefaultDepth 16, but there the only mode is "800x600". You need the higher resolutions there, and the first one in the line is the one used, so you can add a bunch and ctrl+ or ctrl- throught them.

Here is what I have (this was set up via drakconf)...

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 24
Virtual 1280 1024
EndSubsection
EndSection

...also, if you want to get more modelines to make everything work:

http://xtiming.sourceforge.net/cgi-bin/xtiming.pl

Thanks for your advice which i followed but still stuck with a virtual screen in 800x600.
This is a pain. qnce again thank you all advice is appreciated
Regards Jeff