LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Mandriva
User Name
Password
Mandriva This Forum is for the discussion of Mandriva (Mandrake) Linux.

Notices


Reply
  Search this Thread
Old 04-23-2004, 12:49 PM   #1
CyberLord_7
Member
 
Registered: Aug 2003
Distribution: Mandrake 9.1
Posts: 69

Rep: Reputation: 15
One problem became two: USB fault stopped X!


Please bear with me as I recount this epic journey into confusion.

I have a computer running Mandrake 9.1. My window manager is Gnome. I have been playing with my USB thumb-drive, a Lexar JumpDrive 2.0. I can access it under Nautilus or the Command Line Interface.
A few days ago while in Nautilus I "cut" a rather large Windows .EXE file and tried to paste it into a folder in my home directory. The transfer stopped quickly and just froze there. I vainly tried to abort in the CLI using Cntrl-C, and Cntrl-Z. I then tried to use the "kill" command. The frozen window showing the transfer progress remained. I clicked the icon for the "Removable" drive on my desktop to stop it. That failed too. I then tried to umount it from the CLI. I got an error stating that the "Removable" drive could not be found.
OK I can take a hint, so I attempted to "logout" and found that besides removing my icons from my desktop nothing happened. Since I could not reach my root account from where I was I turned the computer off. YIKES!
I turned the machine back on and I moved to slowly to force a file integrity check.
My USB drive could not be found at first, but I was able to mount it from the CLI. Everything was working fine, but I was uncomfortable knowing that a file intergrity check had not been done.
So, I logged off and shutdown properly, then I started the machine again.
This time I was ready to hit the "y" to force a file intergrity check.
After a loooong time checking itself my system came back...minus X!
I tried to "StartX" and got the following message:

[drm] failed to load kernal module "agpgart"
waiting for X server to shut down.

Fortunately I did not panic. I did a dmesg > /mnt/floppy/dmesg.txt which I will copy below.
I added line numbers for clarity. Line 142 does not find a PNP device because I had removed the Thumb-drive before I turned the machine on. Lines 210 and 211 seem to be very comforting unless you know I don't have X anymore.
I am concerned with the following lines, but if you see something else wrong please let me know.
line 241,
line 262,
lines 268 - 299,
line 305 What is that?
Please help me get X back.
Thank you
the dmesg output follows:

----------------------------------------------------------------

001 Linux version 2.4.21-0.13mdk
002 (flepied@bi.mandrakesoft.com)
003 1(gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) 004 #1 Fri Mar 14 15:08:06 EST 2003
005 BIOS-provided physical RAM map:
006 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
007 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
008 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
009 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
010 BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
011 BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
012 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
013 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
014 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
015 511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
016 found SMP MP-table at 000fb930
017 hm, page 000fb000 reserved twice.
018 hm, page 000fc000 reserved twice.
019 hm, page 000f6000 reserved twice.
020 hm, page 000f7000 reserved twice.
021 On node 0 totalpages: 131056
zone(0): 4096 pages.
022 zone(1): 126960 pages.
023 zone(2): 0 pages.
024 Intel MultiProcessor Specification v1.4
025 Virtual Wire compatibility mode.
026 OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
027 Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 3 at 0xFEC00000.
028 Enabling APIC mode: Flat. Using 1 I/O APICs
029 Processors: 1
030 Kernel command line: BOOT_IMAGE=linux ro root=301 devfs=mount hdc=ide-scsi acpi=off quiet
031 ide_setup: hdc=ide-scsi
032 Initializing CPU#0
033 Detected 1150.053 MHz processor.
034 Console: colour dummy device 80x25
035 Calibrating delay loop... 2293.76 BogoMIPS
036 Memory: 515088k/524224k available (1410k kernel code, 8748k reserved, 1118k data, 136k init, 0k highmem)
037 Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
038 Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
039 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
040 Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
041 Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
042 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
043 CPU: L2 Cache: 256K (64 bytes/line)
044 Intel machine check architecture supported.
045 Intel machine check reporting enabled on CPU#0.
046 CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
047 CPU: Common caps: 0383fbff c1cbfbff 00000000
00000000
048 CPU: AMD Athlon(tm) XP stepping 02
049 Enabling fast FPU save and restore... done.
050 Enabling unmasked SIMD FPU exception support... done.
051 Checking 'hlt' instruction... OK.
052 POSIX conformance testing by UNIFIX
053 enabled ExtINT on CPU#0
054 ESR value before enabling vector: 00000080
055 ESR value after enabling vector: 00000000
056 ENABLING IO-APIC IRQs
057 Setting 2 in the phys_id_present_map
058 ...changing IO-APIC physical APIC ID to 2 ... ok.
059 init IO_APIC IRQs
060 IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-18, 2-19, 2-20
not connected.
061 ..TIMER: vector=0x31 pin1=2 pin2=0
062 number of MP IRQ sources: 20.
063 number of IO-APIC #2 registers: 24.
064 testing the IO APIC.......................
065
066 IO APIC #2......
.... register #00: 02000000
067 ....... : physical APIC id: 02
068 .... register #01: 00178003
....... : max redirection entries: 0017
069 ....... : PRQ implemented: 1
....... : IO APIC version: 0003
070 An unexpected IO-APIC was found. If this kernel release is less
than
071 three months old please report this to linux-smp@vger.kernel.org
072 .... IRQ redirection table:
073 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
074 00 000 00 1 0 0 0 0 0 0 00
075 01 001 01 0 0 0 0 0 1 1 39
076 02 001 01 0 0 0 0 0 1 1 31
077 03 001 01 0 0 0 0 0 1 1 41
078 04 001 01 0 0 0 0 0 1 1 49
079 05 000 00 1 0 0 0 0 0 0 00
080 06 001 01 0 0 0 0 0 1 1 51
081 07 001 01 0 0 0 0 0 1 1 59
082 08 001 01 0 0 0 0 0 1 1 61
083 09 001 01 0 0 0 0 0 1 1 69
084 0a 000 00 1 0 0 0 0 0 0 00
085 0b 000 00 1 0 0 0 0 0 0 00
086 0c 001 01 0 0 0 0 0 1 1 71
087 0d 001 01 0 0 0 0 0 1 1 79
088 0e 001 01 0 0 0 0 0 1 1 81
089 0f 001 01 0 0 0 0 0 1 1 89
090 10 001 01 1 1 0 1 0 1 1 91
091 11 000 00 1 0 0 0 0 0 0 00
092 12 000 00 1 0 0 0 0 0 0 00
093 13 000 00 1 0 0 0 0 0 0 00
094 14 000 00 1 0 0 0 0 0 0 00
095 15 001 01 1 1 0 1 0 1 1 99
096 16 001 01 1 1 0 1 0 1 1 A1
097 17 001 01 1 1 0 1 0 1 1 A9
098 IRQ to pin mappings:
099 IRQ0 -> 0:2
100 IRQ1 -> 0:1
101 IRQ3 -> 0:3
102 IRQ4 -> 0:4
103 IRQ6 -> 0:6
104 IRQ7 -> 0:7
105 IRQ8 -> 0:8
106 IRQ9 -> 0:9
107 IRQ12 -> 0:12
108 IRQ13 -> 0:13
109 IRQ14 -> 0:14
110 IRQ15 -> 0:15
111 IRQ16 -> 0:16
112 IRQ21 -> 0:21
113 IRQ22 -> 0:22
114 IRQ23 -> 0:23
115 .................................... done.
116 Using local APIC timer interrupts.
117 calibrating APIC timer ...
118 ..... CPU clock speed is 1150.0987 MHz.
119 ..... host bus clock speed is 200.0171 MHz.
120 cpu: 0, clocks: 2000171, slice: 1000085
121 CPU0<T0:2000160,T1:1000064,D:11,S:1000085,C:2000171>
122 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
123 mtrr: detected mtrr type: Intel
124 ACPI: Subsystem revision 20030122
125 ACPI: Disabled via command line (acpi=off)
126 PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
127 PCI: Using configuration type 1
128 PCI: Probing PCI hardware
129 PCI: ACPI tables contain no PCI IRQ routing entries
130 PCI: Probing PCI hardware (bus 00)
131 PCI: Using IRQ router default [1106/3177] at 00:11.0
132 PCI->APIC IRQ transform: (B0,I16,P0) -> 21
133 PCI->APIC IRQ transform: (B0,I16,P1) -> 21
134 PCI->APIC IRQ transform: (B0,I16,P2) -> 21
135 PCI->APIC IRQ transform: (B0,I16,P3) -> 21
136 PCI->APIC IRQ transform: (B0,I17,P0) -> 22
137 PCI->APIC IRQ transform: (B0,I17,P2) -> 22
138 PCI->APIC IRQ transform: (B0,I18,P0) -> 23
139 PCI->APIC IRQ transform: (B1,I0,P0) -> 16
140 PCI: Via IRQ fixup for 00:10.0, from 11 to 5
141 isapnp: Scanning for PnP cards...
142 isapnp: No Plug & Play device found
143 Linux NET4.0 for Linux 2.4
144 Based upon Swansea University Computer Society NET3.039
145 Initializing RT netlink socket
146 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
147 Starting kswapd
148 VFS: Disk quotas vdquot_6.5.1
149 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
150 devfs: boot_options: 0x1
151 vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
152 vesafb: mode is 800x600x16, linelength=1600, pages=67
153 vesafb: protected mode interface info at c000:5406
154 vesafb: scrolling: redraw
155 vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
156 Looking for splash picture.... found (800x600, 25593 bytes).
157 Console: switching to colour frame buffer device 80x16
158 fb0: VESA VGA frame buffer device
159 pty: 256 Unix98 ptys configured
160 Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
161 ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
162 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
163 Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
164 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
165 VP_IDE: IDE controller at PCI slot 00:11.1
166 VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
167 VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
168 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbMA
169 ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA,
hddMA
170 hda: WDC WD800JB-00CRA1, ATA DISK drive
171 hdb: WDC WD800JB-00CRA1, ATA DISK drive
172 hda: DMA disabled
173 blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)
174 hdb: DMA disabled
175 blk: queue c03cb55c, I/O limit 4095Mb (mask 0xffffffff)
176 hdc: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
177 hdd: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
178 hdc: DMA disabled
179 hdd: DMA disabled
180 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
181 ide1 at 0x170-0x177,0x376 on irq 15
182 hda: host protected area => 1
183 hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(100)
184 hdb: host protected area => 1
185 hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(100)
186 Partition check:
187 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
188 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 >
189 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
190 md: Autodetecting RAID arrays.
191 md: autorun ...
192 md: ... autorun DONE.
193 NET4: Linux TCP/IP 1.0 for NET4.0
194 IP: routing cache hash table of 4096 buckets, 32Kbytes
195 TCP: Hash tables configured (established 32768 bind 65536)
196 Linux IP multicast router 0.06 plus PIM-SM
197 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
198 RAMDISK: Compressed image found at block 0
199 Freeing initrd memory: 108k freed
200 VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
201 Journalled Block Device driver loaded
202 EXT3-fs: INFO: recovery required on readonly filesystem.
203 EXT3-fs: write access will be enabled during recovery.
204 kjournald starting. Commit interval 5 seconds
205 EXT3-fs: ide0(3,1): orphan cleanup on readonly fs
206 ext3_orphan_cleanup: deleting unreferenced inode 280221
207 ext3_orphan_cleanup: deleting unreferenced inode 280220
208 ext3_orphan_cleanup: deleting unreferenced inode 280216
209 EXT3-fs: ide0(3,1): 3 orphan inodes deleted
210 EXT3-fs: recovery complete.
211 EXT3-fs: mounted filesystem with ordered data mode.
212 Mounted devfs on /dev
213 Freeing unused kernel memory: 136k freed
214 Real Time Clock Driver v1.10e
215 usb.c: registered new driver usbdevfs
216 usb.c: registered new driver hub
217 usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
218 usb-uhci.c: High bandwidth mode enabled
219 usb-uhci.c: USB UHCI at I/O 0xec00, IRQ 21
220 usb-uhci.c: Detected 2 ports
221 usb.c: new USB bus registered, assigned bus number 1
222 hub.c: USB hub found
223 hub.c: 2 ports detected
224 usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 21
225 usb-uhci.c: Detected 2 ports
226 usb.c: new USB bus registered, assigned bus number 2
227 hub.c: USB hub found
228 hub.c: 2 ports detected
229 usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 21
230 usb-uhci.c: Detected 2 ports
231 usb.c: new USB bus registered, assigned bus number 3
232 hub.c: USB hub found
233 hub.c: 2 ports detected
234 usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
235 ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
236 ehci-hcd 00:10.3: irq 21, pci mem e495bf00
237 usb.c: new USB bus registered, assigned bus number 4
238 ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2002-Dec20
239 hub.c: USB hub found
240 hub.c: 6 ports detected
241 usbdevfs: remount parameter error
242 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
243 Adding Swap: 506008k swap-space (priority -1)
244 Adding Swap: 506008k swap-space (priority -2)
245 SCSI subsystem driver Revision: 1.00
246 scsi0 : SCSI host adapter emulation for IDE ATAPI devices
247 Vendor: LITE-ON Model: LTR-52246S Rev: 6S0D
248 Type: CD-ROM ANSI SCSI revision: 02
249 hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
250 Uniform CD-ROM driver Revision: 3.12
251 kjournald starting. Commit interval 5 seconds
252 EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
253 EXT3-fs: mounted filesystem with ordered data mode.
254 via-rhine.c:v1.10-LK1.1.15 November-22-2002 Written by Donald Becker
255 http://www.scyld.com/network/via-rhine.html
256 eth0: VIA VT6102 Rhine-II at 0xdc00, 00:0c:76:58:36:52, IRQ 23.
257 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
258 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
259 PCI: Setting latency timer of device 00:11.5 to 64
260 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
261 parport0: irq 7 detected
lp0: using parport0 (polling).
262 Splash status on console 0 changed to off
263 inserting floppy driver for 2.4.21-0.13mdk
264 Floppy drive(s): fd0 is 1.44M
265 FDC 0 is a post-1991 82077
265a Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
266 sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
267 Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
268 agpgart: Detected Via Apollo Pro KT400 chipset
269 agpgart: unable to determine aperture size.
270 Linux agpgart interface v0.99 (c) Jeff Hartmann
271 agpgart: Maximum main memory to use for agp memory: 439M
272 agpgart: Detected Via Apollo Pro KT400 chipset
273 agpgart: unable to determine aperture size.
274 Linux agpgart interface v0.99 (c) Jeff Hartmann
275 agpgart: Maximum main memory to use for agp memory: 439M
276 agpgart: Detected Via Apollo Pro KT400 chipset
277 agpgart: unable to determine aperture size.
278 Linux agpgart interface v0.99 (c) Jeff Hartmann
279 agpgart: Maximum main memory to use for agp memory: 439M
280 agpgart: Detected Via Apollo Pro KT400 chipset
281 agpgart: unable to determine aperture size.
282 Linux agpgart interface v0.99 (c) Jeff Hartmann
283 agpgart: Maximum main memory to use for agp memory: 439M
284 agpgart: Detected Via Apollo Pro KT400 chipset
285 agpgart: unable to determine aperture size.
286 [drm] Initialized radeon 1.7.0 20020828 on minor 0
287 Linux agpgart interface v0.99 (c) Jeff Hartmann
288 agpgart: Maximum main memory to use for agp memory: 439M
289 agpgart: Detected Via Apollo Pro KT400 chipset
290 agpgart: unable to determine aperture size.
291 Linux agpgart interface v0.99 (c) Jeff Hartmann
292 agpgart: Maximum main memory to use for agp memory: 439M
293 agpgart: Detected Via Apollo Pro KT400 chipset
294 agpgart: unable to determine aperture size.
295 Linux agpgart interface v0.99 (c) Jeff Hartmann
296 agpgart: Maximum main memory to use for agp memory: 439M
297 agpgart: Detected Via Apollo Pro KT400 chipset
298 agpgart: unable to determine aperture size.
299 [drm:radeon_unlock] *ERROR* Process 1894 using kernel context 0
300 udf: registering filesystem
301 UDF-fs DEBUG lowlevel.c:65:udf_get_last_session: CDROMMULTISESSION not supported: rc=-22
302 UDF-fs DEBUG super.c:1426:udf_read_super: Multi-session=0
303 UDF-fs DEBUG super.c:415:udf_vrs: Starting at sector 16 (2048 byte sectors)
304 UDF-fs: No VRS found
305 Unable to identify CD-ROM format.
306 MSDOS FS: IO charset iso8859-1
307 MSDOS FS: Using codepage 850
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
HP DJ 845c USB stopped functioning - help? Boooaz Linux - Hardware 2 08-04-2005 08:01 PM
USB stopped working jowizzle Linux - Software 1 03-20-2005 12:11 AM
Mandrake 10, USB stopped working EvMaster Linux - Hardware 3 07-30-2004 12:28 PM
usb stopped working FC1 slackist Fedora 17 06-10-2004 07:43 PM
USB has stopped working cruane Linux - Software 1 12-02-2002 01:52 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Mandriva

All times are GMT -5. The time now is 05:51 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration