LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Mandriva
User Name
Password
Mandriva This Forum is for the discussion of Mandriva (Mandrake) Linux.

Notices

Reply
 
Search this Thread
Old 10-08-2004, 02:02 PM   #1
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Rep: Reputation: 0
Logon problem - No login window


Hello good ppl,
I installed mdrk linux 10.1 yesterday, and everything went fine with the installation process, no errors at all [the only thing that bothered me was that it didn't detect my printer, but thatís a minor problem I'll solve later].
After the installation, I booted it through lilo bootloader, and so the blue screen appeared, that vividly reminded me of win deathscreen, and that was it. Beside a nice mouse pointer, that responded to mouse movements, and a "mandrakelinux" starry sign in the bottom right corner of the screen there was noting there. The text console works fine though. I tried:
-init 3 then init 5
-deleted .0X-lock file
-chkconfig --add dm [just in case]

Well, it all didn't work, I still get the everblue half-dead screen and no login window T_T

Here are the contents of Xorg.0.log file:

------------------------------------------Xorg.0.log----------------------------------------

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.6.8.1-2mdkenterprise i686 [ELF]
Current Operating System: Linux localhost 2.6.8.1-10mdk #1 Wed Sep 8 17:00:52 CEST 2004 i686
Build Date: 13 September 2004
Before reporting problems, check [I removed address, b/c it woudn't post it]
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 8 12:01:05 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "pl"
(**) XKB: layout: "pl"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(II) Open APM successful
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x800050fc, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 1043,8017 rev c4 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 1106,0596 card 1043,8017 rev 23 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 11 class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 1106,3050 card 0000,0000 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:09:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1102,0002 card 1102,8064 rev 07 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0343 card 1458,310c rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xce000000 - 0xcfefffff (0x1f00000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xcff00000 - 0xdfffffff (0x10100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:4:3), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0343) rev 161, Mem @ 0xce000000/24, 0xd0000000/28, BIOS @ 0xcffe0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xcd800000 - 0xcd8000ff (0x100) MX[B]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[2] -1 0 0xcffe0000 - 0xcfffffff (0x20000) MX[B](B)
[3] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[4] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[5] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[6] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[7] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xcd800000 - 0xcd8000ff (0x100) MX[B]
[1] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[2] -1 0 0xcffe0000 - 0xcfffffff (0x20000) MX[B](B)
[3] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[4] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[5] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[6] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[7] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xcd800000 - 0xcd8000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xcffe0000 - 0xcfffffff (0x20000) MX[B](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[9] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[13] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[14] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.7.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "/usr/X11R6/lib/modules/extensions/libglx.a" (glx)
(WW) LoadModule: given non-canonical module name "/usr/X11R6/lib/modules/extensions/libglx.a"
(II) Reloading /usr/X11R6/lib/modules/extensions/libglx.a
(II) UnloadModule: "glx"
(EE) Failed to load module "/usr/X11R6/lib/modules/extensions/libglx.a" (once-only module, 135962511)
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, 0x0313, GeForce FX 5600SE,
0x0316, 0x0317, GeForce FX Go5600, GeForce FX Go5650,
Quadro FX Go700, 0x031D, 0x031E, 0x031F, GeForce FX 5200,
GeForce FX 5200 Ultra, GeForce FX 5200, GeForce FX 5200SE,
GeForce FX Go5200, GeForce FX Go5250, GeForce FX Go5200 32M/64M,
0x0329, Quadro NVS 280 PCI, Quadro FX 500, GeForce FX Go5300,
GeForce FX Go5100, 0x032F, GeForce FX 5900 Ultra, GeForce FX 5900,
GeForce FX 5900XT, GeForce FX 5950 Ultra, 0x0334, Quadro FX 3000,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce FX 5700LE found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xcd800000 - 0xcd8000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xcffe0000 - 0xcfffffff (0x20000) MX[B](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[9] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[13] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[14] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xcd800000 - 0xcd8000ff (0x100) MX[B]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[7] -1 0 0xcffe0000 - 0xcfffffff (0x20000) MX[B](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[9] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[16] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce FX 5700LE"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD0000000
(--) NV(0): MMIO registers at 0xCE000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0): ...found one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: SNY Model: e50 Serial#: 4011475
(II) NV(0): Year: 1999 Week: 44
(II) NV(0): EDID Version: 1.2
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync: Separate Composite SyncOnGreen
(II) NV(0): Max H-Image Size [cm]: horiz.: 28 vert.: 22
(II) NV(0): Gamma: 2.50
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.605
(II) NV(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 720x400@88Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@87Hz (interlaced)
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NV(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) NV(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) NV(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 94.5 MHz Image Size: 270 x 202 mm
(II) NV(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) NV(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) NV(0): Ranges: V min: 48 V max: 120 Hz, H min: 30 H max: 70 kHz, PixClock max 200 MHz
(II) NV(0): Monitor name: SONY HMD-A100
(II) NV(0): Serial No: 4011475
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): ... none found
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 131072 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): monitor1: Using hsync range of 30.00-70.00 kHz
(II) NV(0): monitor1: Using vrefresh range of 48.00-120.00 Hz
(II) NV(0): Clock range: 12.00 to 400.00 MHz
(II) NV(0): Not using mode "1280x800" (width too large for virtual size)
(II) NV(0): Not using mode "1680x1050" (width too large for virtual size)
(II) NV(0): Not using mode "1920x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "1152x864" (width too large for virtual
size)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NV(0): Not using default mode "640x480" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "640x512" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "700x525" (hsync out of range)
(II) NV(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
 
Old 10-08-2004, 02:03 PM   #2
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(**) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) NV(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) NV(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) NV(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) NV(0): *Mode "1024x480": 65.0 MHz, 48.4 kHz, 85.9 Hz
(II) NV(0): Modeline "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) NV(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) NV(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) NV(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) NV(0): *Mode "768x576": 63.1 MHz, 61.6 kHz, 100.0 Hz
(II) NV(0): Modeline "768x576" 63.07 768 800 960 1024 576 578 590 616
(**) NV(0): *Mode "768x576": 50.0 MHz, 50.0 kHz, 79.4 Hz
(II) NV(0): Modeline "768x576" 50.00 768 832 846 1000 576 590 595 630
(**) NV(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) NV(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) NV(0): *Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NV(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) NV(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) NV(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) NV(0): *Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) NV(0): *Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) NV(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(**) NV(0): *Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) NV(0): *Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) NV(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) NV(0): *Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) NV(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) NV(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) NV(0): *Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) NV(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) NV(0): *Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) NV(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) NV(0): *Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(**) NV(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(**) NV(0): *Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(--) NV(0): Display dimensions: (280, 220) mm
(--) NV(0): DPI set to (92, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[1] 0 0 0xce000000 - 0xceffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xcd800000 - 0xcd8000ff (0x100) MX[B]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[9] -1 0 0xcffe0000 - 0xcfffffff (0x20000) MX[B](B)
[10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[11] -1 0 0xce000000 - 0xceffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[18] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xd0000000,0x8000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "6 7"
(**) Mouse1: ZAxisMapping: buttons 6 and 7
(**) Mouse1: Buttons: 7
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
------------------------------------------------End Xorg.0.log----------------------------------
Hope you can help me....
 
Old 10-09-2004, 11:16 AM   #3
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
I found some errors in kdm.log file, maybe they'll clear things up a bit:

------------------kdm.log--------------------------------------------------------
********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************


Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.6.8.1-2mdkenterprise i686 [ELF]
Current Operating System: Linux localhost 2.6.8.1-10mdk #1 Wed Sep 8 17:00:52 CEST 2004 i686
Build Date: 13 September 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 7 23:30:34 2004
(==) Using config file: "/etc/X11/xorg.conf"
Using vt 7
(EE) Failed to load module "/usr/X11R6/lib/modules/extensions/libglx.a" (once-only module, 135962511)
SCIM: im_module_init
Failed to load table IMEngine module.
Failed to load socket IMEngine module.
Failed to load table IMEngine module.

(...)[It keeps on reapeating same thing for every boot attempt.]

-------------------------end-------------------------------------------
 
Old 10-09-2004, 12:22 PM   #4
otish1000c
Member
 
Registered: May 2004
Location: Pennsylvania, USA
Distribution: dual boot.... Mandrake 10.0OE/10.xcooker
Posts: 611

Rep: Reputation: 30
what vid card are you using? from your log............

Quote:
(EE) Failed to load module "/usr/X11R6/lib/modules/extensions/libglx.a" (once-only module, 135962511)
seems to me glx 3d layering is bombing on you. try commenting out the glx 3d line in your xorg.conf file. look for the following section & comment it out as follows (in red).......

Code:
Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    #Load "glx" # 3D layer
EndSection
if you're not sure how to do that, see the Nvidia link in my nick & read the part about editing xfree/xorg.

EDIT: i also see you have an Nvidia card. did you install the drivers correctly? again, refer tot the link in my sig for info.

please post back.

otis

Last edited by otish1000c; 10-09-2004 at 12:44 PM.
 
Old 10-09-2004, 01:53 PM   #5
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
Well, I'm having some major w2k problems again T_T. Ever since I installed sp4, my w2k is everything but stable... just an hour ago it crashed and guess what - registry file got screwd up, and it coudn't recover it from backup... good thing I had a backup from 2 months ago... but taht's off-topic....

As to my gfx card - it's GeForce FX 5700LE. As I said, I just installed mandrake, so I haven't installed any official nvidia drivers yet, I simply chose during the install that I have nvidia chipset based gfx card, thats all.

I'll try commenting out the glx 3d line in xorg.conf amd see if it does any good. Also, I could install official nvidia drivers if you think taht might help [since I have to do that anyway]. Perhaps I sould try to install the drivers first, and then edid xorg.conf if there is no change...

But first I must get some w2k issues out of the way, since 2months old reg files are indeed old.... GRRRRR
 
Old 10-09-2004, 05:56 PM   #6
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
Hmmm... strange things keep happening tome, or so it seems....
I was *trying* to install nvidia drivers, but it didn't want to, since it didn't see ma kernel source [or maybe i forgot to install it]. So I went ahead and inserted 3d CD and done rpm -i on sth that looked like kernel rpm file ^_^ . No I received quite a different msg from nvidia rpm - it said that it can't compile it. Well, I used urpmq kernel to see what other rpms are available to me, and did urpmi on package called kernel-smp-2.6.8.1.10mdk. it installed it, but nvidia drivers still wouldn't work. So, beaten, I typed in init 5 and guess what happened - logon window appeared after x loaded up. wow. As i'm writing it I am in X environment now. But I still need to install those nvidia drivers. Any idea ho can I do that?

And one more question, unrelated - is there a file explorer I can install that would display [like win explorer] a file tree and files [in two side-by-side windows]?
 
Old 10-09-2004, 07:43 PM   #7
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
Ha, ha - guess what just happened - I was browsing through some images. to find one suitable for my second desktop, when mandrake suddenly crashed with absolutely no error message. The smudged colors on the screen led me to a conclusion that that probably was that driver problem. So please, please help me install those nvidia drivers. Here's the what I get when I try to install them [this attempt was with --add-this-kernel]:

---------------------nvidia-installer log file '/var/log/nvidia-installer.log'-----------------------------------------------
creation time: Sun Oct 10 02:28:12 2004

option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
no precompiled interface: false
no ncurses color : false
query latest driver ver : false
OpenGL header files : false
no questions : false
silent : false
X install prefix : /usr/X11R6
OpenGL install prefix : /usr
Installer install prefix: /usr
kernel source path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /root/tmp
ftp site : ftp://download.nvidia.com

Using: nvidia-installer ncurses user interface
-> Kernel source path: '/lib/modules/2.6.8.1-10mdk/build'
-> Copying kernel module sources to temporary directory.
-> Building kernel interface:
executing: 'cd /root/tmp/nvidia-5758; make nv-linux.o SYSSRC=/lib/modules/2.
6.8.1-10mdk/build'...
Your kernel was configured to include rivafb support as
a loadable kernel module.

The rivafb driver conflicts with the NVIDIA driver; the
NVIDIA kernel module will still be built and installed,
but be aware that the NVIDIA driver will not be able to
function properly if the rivafb module is loaded!

*** Failed rivafb module sanity check, but continuing! ***


NVIDIA: calling KBUILD...
mkdir -p /root/tmp/nvidia-5758/.tmp_versions
make -f scripts/Makefile.build obj=/root/tmp/nvidia-5758
echo \#define NV_COMPILER \"`cc -v 2>&1 | tail -n 1`\" > /root/tmp/nvidia-57
58/nv_compiler.h
cc -Wp,-MD,/root/tmp/nvidia-5758/.nv.o.d -nostdinc -iwithprefix include -D
__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-a
liasing -fno-common -pipe -msoft-float -mpreferred-stack-boundary=2 -fno-uni
t-at-a-time -march=i686 -Iinclude/asm-i386/mach-default -O2 -Wdeclaration-af
ter-statement -I/root/tmp/nvidia-5758 -Wall -Wimplicit -Wreturn-type -Wswitc
h -Wformat -Wchar-subscripts -Wparentheses -Wpointer-arith
-Wno-multichar -Werror -O -fno-common -MD -Wno-cast-qual -Wno-error -D_L
OOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNTRM -D_GNU_SOURCE -D_LOOSE_KERNE
L_NAMES -D__KERNEL__ -DMODULE -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DN
V_PATCHLEVEL=6111 -DNV_UNIX -DNV_LINUX -DNV_INT64_OK -DNVCPU_X86
-UDEBUG -U_DEBUG -DNDEBUG -DNV_CHANGE_PAGE_ATTR_PRESENT -DNV_CLASS_SIMPLE_PR
ESENT -DMODULE -DKBUILD_BASENAME=nv -DKBUILD_MODNAME=nvidia -c -o /root/tmp
/nvidia-5758/nv.o /root/tmp/nvidia-5758/nv.c
/root/tmp/nvidia-5758/nv.c: In function `nv_acpi_event':
/root/tmp/nvidia-5758/nv.c:3697: error: `PM_SAVE_STATE' undeclared (first us
e in this function)
/root/tmp/nvidia-5758/nv.c:3697: error: (Each undeclared identifier is repor
ted only once
/root/tmp/nvidia-5758/nv.c:3697: error: for each function it appears in.)
make[3]: *** [/root/tmp/nvidia-5758/nv.o] Error 1
make[2]: *** [_module_/root/tmp/nvidia-5758] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [nv-linux.o] Error 2
-> Error.
ERROR: Unable to build the NVIDIA kernel module interface.
ERROR: Unable to add a precompiled kernel interface for the running kernel.
-------------------------------------------------------------end---------------------------------------------------------

I'll run it with out --add and post log too. Hope you can help me...
 
Old 10-09-2004, 07:52 PM   #8
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
another log, as promissed this time I did reguliar sh run:

nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Oct 10 02:45:43 2004

option status:
license pre-accepted : false
update : false
force update : false
expert : false
uninstall : false
driver info : false
no precompiled interface: false
no ncurses color : false
query latest driver ver : false
OpenGL header files : false
no questions : false
silent : false
X install prefix : /usr/X11R6
OpenGL install prefix : /usr
Installer install prefix: /usr
kernel source path : (not specified)
kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /root/tmp
ftp site : ftp://download.nvidia.com

Using: nvidia-installer ncurses user interface
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
ke the installer to attempt to download a kernel interface for your kernel f
rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
this means that the installer will need to compile a kernel interface for
your kernel.
-> Kernel source path: '/lib/modules/2.6.8.1-10mdk/build'
-> Performing cc_version_check with CC="cc".
-> Performing rivafb check.
-> Performing rivafb module check.
WARNING: Your kernel was configured to include rivafb support as
a loadable kernel module.

The rivafb driver conflicts with the NVIDIA driver; the
NVIDIA kernel module will still be built and installed,
but be aware that the NVIDIA driver will not be able to
function properly if the rivafb module is loaded!
-> Cleaning kernel module build directory.
executing: 'cd ./usr/src/nv; make clean'...
rm -f -f nv.o os-agp.o os-interface.o os-registry.o nv.o os-agp.o os-interfa
ce.o os-registry.o nvidia.mod.o
rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags}
rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~
-> Building kernel module:
executing: 'cd ./usr/src/nv; make module SYSSRC=/lib/modules/2.6.8.1-10mdk/b
uild SYSOUT=/lib/modules/2.6.8.1-10mdk/build'...
Your kernel was configured to include rivafb support as
a loadable kernel module.

The rivafb driver conflicts with the NVIDIA driver; the
NVIDIA kernel module will still be built and installed,
but be aware that the NVIDIA driver will not be able to
function properly if the rivafb module is loaded!

*** Failed rivafb module sanity check, but continuing! ***


NVIDIA: calling KBUILD...
make -C /lib/modules/2.6.8.1-10mdk/build \
KBUILD_SRC=/usr/src/linux-2.6.8.1-10mdk KBUILD_VERBOSE=1 \
KBUILD_CHECK= KBUILD_EXTMOD="/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-
pkg1/usr/src/nv" \
-f /usr/src/linux-2.6.8.1-10mdk/Makefile modules
mkdir -p /root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/.tmp
_versions
make -f /usr/src/linux-2.6.8.1-10mdk/scripts/Makefile.build obj=/root/tmp/se
lfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv
echo \#define NV_COMPILER \"`cc -v 2>&1 | tail -n 1`\" > /root/tmp/selfgz735
6/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/nv_compiler.h
cc -Wp,-MD,/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/
.nv.o.d -nostdinc -iwithprefix include -D__KERNEL__ -Iinclude -Iinclude2 -I/
usr/src/linux-2.6.8.1-10mdk/include -I/root/tmp/selfgz7356/NVIDIA-Linux-x86
-1.0-6111-pkg1/usr/src/nv -Wall -Wstrict-prototypes -Wno-trigraphs -fno-stri
ct-aliasing -fno-common -pipe -msoft-float -mpreferred-stack-boundary=2 -fno
-unit-at-a-time -march=i686 -I/usr/src/linux-2.6.8.1-10mdk/include/asm-i386/
mach-default -Iinclude/asm-i386/mach-default -O2 -Wdeclaration-after-stateme
nt -I/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv -Wall -
Wimplicit -Wreturn-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -W
pointer-arith -Wno-multichar -Werror -O -fno-common -MD -Wno-cast-qual -Wno-
error -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNTRM -D_GNU_SOURCE -D_LO
OSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSI
ON=0 -DNV_PATCHLEVEL=6111 -DNV_UNIX -DNV_LINUX -DNV_INT64_OK -DNVCPU_X86 -UD
EBUG -U_DEBUG -DNDEBUG -DNV_CHANGE_PAGE_ATTR_PRESENT -DNV_CLASS
_SIMPLE_PRESENT -DMODULE -DKBUILD_BASENAME=nv -DKBUILD_MODNAME=nvidia -c -o
/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/nv.o /root/tm
p/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/nv.c
/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/nv.c: In func
tion `nv_acpi_event':
/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/nv.c:3697: er
ror: `PM_SAVE_STATE' undeclared (first use in this function)
/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/nv.c:3697: er
ror: (Each undeclared identifier is reported only once
/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv/nv.c:3697: er
ror: for each function it appears in.)
make[4]: *** [/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/usr/src/nv
/nv.o] Error 1
make[3]: *** [_module_/root/tmp/selfgz7356/NVIDIA-Linux-x86-1.0-6111-pkg1/us
r/src/nv] Error 2
make[2]: *** [modules] Error 2
NVIDIA: left KBUILD.
nvidia.ko failed to build!
make[1]: *** [module] Error 1
make: *** [module] Error 2
-> Error.
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find suggestions
on fixing installation problems in the README available on the Linux
driver download page at www.nvidia.com.

-------------------------------------------------------end-----------------------------------------------------------------
 
Old 10-10-2004, 05:13 AM   #9
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
Bah, I got dose drivers to install. For all people having problems with nvidia drivers 61.11 and mandrake 10.1 try this link: TRY IT

Anyway, I still have some questions:

-is there a file manager for x environment that can show a file tree and files [like win explorer did]
-how can I change font/color/size of the text under the icons on desktop? I searched through kdm look'n'feel but couldn't find it

I forgot the third question....
 
Old 10-10-2004, 01:37 PM   #10
mko_san
LQ Newbie
 
Registered: Oct 2004
Posts: 9

Original Poster
Rep: Reputation: 0
I guess nobody cares about this thread any more, but I still do ^_^
Ever since I installed nvidia drivers the consoles stopped working... well, not exacly - its just thsat the screen resoluton in consol mode seems to be 10X10 or so, and you can bearly distigusish some letters [the're huge, and the whole screen is covered in white strips, and it is blinking]. Any idea ho can fix that?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with password logon window wardialer Linux - Newbie 3 04-08-2005 02:24 AM
Automatic User Login / Logon ciaran.mooney Linux - General 6 04-06-2005 02:25 PM
Configuring clients to logon remote X login manager. darkfame Linux - Networking 1 01-15-2004 03:57 AM
login window johnyy Linux - Software 2 09-30-2003 02:30 PM
window xp logon failed alris Linux - Networking 1 08-04-2003 09:05 AM


All times are GMT -5. The time now is 12:27 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration