usb adapter TP link-- Atheros AR8132 in Fedora14
Hi all
This adapter was working great on Fedora 13. I just plugged it in, without installing any driver. I recently had to install Fedora 14. Gnome network manager still connects to the wireless, but I get no data or at most a speed of few tens of Bytes, enough for ping and nothing more.
The router I am using it the same; every condition is the same as it was when I used the adapter wit Fedora 13.
The machine is a Compaq mini 110c netbook. For completeness of information, I have also windows xp on it, on which the adapter sometimes works fine but often does not allow me to browse the web (error 105).
Anyway, if I get closer to the router (I got the external adapter becuse my room is too far from the router) and can use the built-in antenna, all the above problems disappear, both in Fedora 14 and in windows xp.
Here there are lspci and lsusb outputs
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
02:00.0 Ethernet controller: Atheros Communications AR8132 Fast Ethernet (rev c0)
$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
Bus 001 Device 002: ID 174f:1105 Syntek SM-MS/Pro-MMC-XD Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Thanks!
as it appears from lsusb, the chipset is Atheros AR9001U-(2)NG... I mistakenly wrote the ethernet one in the post subject. Sorry for the confusion.
Last edited by akille; 05-02-2011 at 06:13 AM.
Reason: correct a mistake
|