[FIXED]
Update: I didn't blacklist the rlt8180 driver, after that it worked. To be more specific, it worked smoothly (hours, >200 KB/s) on an old Abit KT7 board with 2.6.26 and WPA2 AES. With the same linux bootdisk etc it didn't work on a NForce3 250 board (mp_reset:64), neither it worked under WinXP SP3 on that machine. With doesn't work I mean: you see the AP's etc, but establishing the connection doesn't work. I turned off IOAPIC and ACPI to see any effect on ndiswrapper (windows doesn't boot anymore then), but that did't make any change.
So still to be understood:
ndiswrapper: mp_reset:64 wlan is being reset. Neither it works under WinXP SP3, so it seems something is seriously wrong with the realtek driver. (Or bios of the mobo concerning ACPI etc?) Under Win unencrypted doesn't work either, I didn't tried that yet under linux.
On the NForce board, with the rtl8180 standard driver the AP's are seen as well but it
doesn't connect either: ADDRCONF NETDEV_UP wlan is being reset.
Under Windows trying to connect to the network results in serious periodically hanging of the whole machine (mouse cursors freezes, numlock etc) for ~5 sec, then 10 sec nothing, etc.
Under linux the machine freezes also completely, but for a much shorter time.
Google'ing shows that there are more people reporting micro stutters and periodically freezing hanging of their machines with the 8185 chip. So I doubt it's the mobo.
---- Original question -----
Realtek 8185 chip connects to a WPA2 AES AP but finally fails to establish the connection.
2.6.26-1-686
lspci /v
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
Subsystem: Realtek Semiconductor Co., Ltd. Device 8225
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at dc00 [size=256]
Memory at e9002000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Kernel driver in use: ndiswrapper
Kernel modules: rtl8180
wpa_supplicant v0.6.4
filename: /lib/modules/2.6.26-1-686/misc/ndiswrapper.ko
version: 1.53
vermagic: 2.6.26-1-686 SMP mod_unload modversions 686
The log below is pretty long, but necessary as for me it's really unclear what exactly goes wrong. 00:0c:f6:4b:a3:be is the AP (essid galaxy), another Vista box with a DLink works smoothly with WPA2 AES.
It finds the AP but after some initial phase the connection is not made. I just tried wicd,
Code:
[23895.644253] wlan1: RX authentication from 00:0c:f6:4b:a3:be (alg=0 transaction=2 status=0)
[23895.644264] wlan1: authenticated
[23895.644274] wlan1: associate with AP 00:0c:f6:4b:a3:be
[23895.647237] wlan1: authentication frame received from 00:0c:f6:4b:a3:be, but not in authenticate state - ignored
[23895.663833] wlan1: RX ReassocResp from 00:0c:f6:4b:a3:be (capab=0x411 status=0 aid=2)
[23895.663858] wlan1: associated
[23901.625278] ADDRCONF(NETDEV_UP): wlan1: link is not ready
Ignoring the auth frame doesn't sound good to me, but is this a fatal err? Has anyone a clue what's going on? Below the output of wpa_supplicant:
/sbin/wpa_supplicant -Dwext -i wlan1 -c/etc/wpa_supplicant.conf -dd
Initializing interface 'wlan1' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=6):
67 61 6c 61 78 79 galaxy
key_mgmt: 0x2
proto: 0x2
pairwise: 0x10
group: 0x10
PSK - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='galaxy'
Initializing interface (2) 'wlan1'
Interface wlan1 set UP - waiting a second for the driver to complete initialization
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf flags 0x0
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:18:e7:5f:b7:cf
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
wpa_driver_wext_set_drop_unencrypted
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan1
Ignore event for foreign ifindex 3
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 483 bytes of scan results (2 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:14:5c:83:19:58 ssid='Hanneke' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
1: 00:0c:f6:4b:a3:be ssid='galaxy' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
selected based on RSN IE
selected WPA AP 00:0c:f6:4b:a3:be ssid='galaxy'
Try to find non-WPA AP
Trying to associate with 00:0c:f6:4b:a3:be (SSID='galaxy' freq=2427 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: DISCONNECTED -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RSN: Ignored PMKID candidate without preauth flag
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=14
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8c02 len=159
WEXT: Custom wireless event: 'ASSOCINFO(ReqIE182432043048606c30140100000fac040100000fac040100000fac020000 RespIE)'
Association info event
req_ies - hexdump(len=46): 00 06 67 61 6c 61 78 79 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:0c:f6:4b:a3:be
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:0c:f6:4b:a3:be
No keys have been configured - skip key clearing
Associated with 00:0c:f6:4b:a3:be
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
Added BSSID 00:0c:f6:4b:a3:be into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
State: ASSOCIATED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RX EAPOL from 00:0c:f6:4b:a3:be
RX EAPOL - hexdump(len=121): 01 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 3a 18 af f8 e3 b6 b9 6a a7 97 11 32 52 de 5c f5 aa c8 3b 00 4c 40 b1 c6 0d 07 3b 8c b3 51 43 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 7c 7f 70 00 ef fc 1f f8 b9 d4 82 6b 44 76 bf a8
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=117
EAPOL-Key type=2
key_info 0x8a (ver=2 keyidx=0 rsvd=0 Pairwise Ack)
key_length=16 key_data_length=22
replay_counter - hexdump(len=8): 00 00 00 00 00 00 00 01
key_nonce - hexdump(len=32): 3a 18 af f8 e3 b6 b9 6a a7 97 11 32 52 de 5c f5 aa c8 3b 00 4c 40 b1 c6 0d 07 3b 8c b3 51 43 16
key_iv - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
key_rsc - hexdump(len=8): 00 00 00 00 00 00 00 00
key_id (reserved) - hexdump(len=8): 00 00 00 00 00 00 00 00
key_mic - hexdump(len=16): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
WPA: RX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 00 8a 00 10 00 00 00 00 00 00 00 01 3a 18 af f8 e3 b6 b9 6a a7 97 11 32 52 de 5c f5 aa c8 3b 00 4c 40 b1 c6 0d 07 3b 8c b3 51 43 16 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 16 dd 14 00 0f ac 04 7c 7f 70 00 ef fc 1f f8 b9 d4 82 6b 44 76 bf a8
State: DISCONNECTED -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:0c:f6:4b:a3:be (ver=2)
RSN: msg 1/4 key data - hexdump(len=22): dd 14 00 0f ac 04 7c 7f 70 00 ef fc 1f f8 b9 d4 82 6b 44 76 bf a8
RSN: PMKID from Authenticator - hexdump(len=16): 7c 7f 70 00 ef fc 1f f8 b9 d4 82 6b 44 76 bf a8
RSN: no matching PMKID found
WPA: Renewed SNonce - hexdump(len=32): 18 26 64 82 dd 59 f8 d0 4d 95 aa 84 3b bc 4a cf 19 72 31 09 f1 e2 af 3d 12 a6 c8 70 11 99 f6 04
WPA: PTK derivation - A1=00:18:e7:5f:b7:cf A2=00:0c:f6:4b:a3:be
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: WPA IE for msg 2/4 - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=121): 01 03 00 75 02 01 0a 00 00 00 00 00 00 00 00 00 01 18 26 64 82 dd 59 f8 d0 4d 95 aa 84 3b bc 4a cf 19 72 31 09 f1 e2 af 3d 12 a6 c8 70 11 99 f6 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 e1 a1 f2 fc 08 f6 c5 61 af c1 07 0e b0 fc e1 00 16 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 483 bytes of scan results (2 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:0c:f6:4b:a3:be ssid='galaxy' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
selected based on RSN IE
selected WPA AP 00:0c:f6:4b:a3:be ssid='galaxy'
Try to find non-WPA AP
Trying to associate with 00:0c:f6:4b:a3:be (SSID='galaxy' freq=2427 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: 4WAY_HANDSHAKE -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=14
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8c02 len=159
WEXT: Custom wireless event: 'ASSOCINFO(ReqIE182432043048606c30140100000fac040100000fac040100000fac020000 RespIE)'
Association info event
req_ies - hexdump(len=46): 00 06 67 61 6c 61 78 79 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:0c:f6:4b:a3:be
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:0c:f6:4b:a3:be
No keys have been configured - skip key clearing
Associated with 00:0c:f6:4b:a3:be
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
BSSID 00:0c:f6:4b:a3:be blacklist count incremented to 2
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
State: ASSOCIATED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b19 len=8
Received 483 bytes of scan results (2 BSSes)
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:0c:f6:4b:a3:be ssid='galaxy' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
skip - blacklisted
1: 00:14:5c:83:19:58 ssid='Hanneke' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
Try to find non-WPA AP
0: 00:0c:f6:4b:a3:be ssid='galaxy' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
skip - blacklisted
1: 00:14:5c:83:19:58 ssid='Hanneke' wpa_ie_len=22 rsn_ie_len=0 caps=0x11
skip - SSID mismatch
No APs found - clear blacklist and try again
Removed BSSID 00:0c:f6:4b:a3:be from blacklist (clear)
Selecting BSS from priority group 0
Try to find WPA-enabled AP
0: 00:0c:f6:4b:a3:be ssid='galaxy' wpa_ie_len=0 rsn_ie_len=20 caps=0x11
selected based on RSN IE
selected WPA AP 00:0c:f6:4b:a3:be ssid='galaxy'
Try to find non-WPA AP
Trying to associate with 00:0c:f6:4b:a3:be (SSID='galaxy' freq=2427 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
RSN: using IEEE 802.11i/D9.0
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
wpa_driver_wext_set_psk
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b04 len=12
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b1a len=14
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8c02 len=159
WEXT: Custom wireless event: 'ASSOCINFO(ReqIE182432043048606c30140100000fac040100000fac040100000fac020000 RespIE)'
Association info event
req_ies - hexdump(len=46): 00 06 67 61 6c 61 78 79 01 08 02 04 0b 16 0c 12 18 24 32 04 30 48 60 6c 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
resp_ies - hexdump(len=16): 01 08 82 84 8b 96 0c 12 18 24 32 04 30 48 60 6c
WPA: set own WPA/RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:0c:f6:4b:a3:be
State: ASSOCIATING -> ASSOCIATED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
Associated to a new BSS: BSSID=00:0c:f6:4b:a3:be
No keys have been configured - skip key clearing
Associated with 00:0c:f6:4b:a3:be
WPA: Association event - clear replay counter
WPA: Clear old PTK
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: SUPP_BE entering state IDLE
Setting authentication timeout: 10 sec 0 usec
Cancelling scan request
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Setting scan request: 0 sec 100000 usec
Added BSSID 00:0c:f6:4b:a3:be into blacklist
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
State: ASSOCIATED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan requested (ret=0) - scan timeout 30 seconds
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan1' added
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan1
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
No keys have been configured - skip key clearing
Removed BSSID 00:0c:f6:4b:a3:be from blacklist (clear)
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
