cnjohnson,
The install went great, easy as .... but.
I seem to be having a little trouble with the config files.
My AP (RG-1000) is running WEP and I cannot seem to get the MA311 to talk to the AP. It has associated ....
# iwconfig wlan0
wlan0 IEEE 802.11-b ESSID:"MasTech" Nickname:"MasTech"
Mode:Managed Frequency:2.437GHz Access Point: 00:E0:63:83:40
B
Bit Rate:11Mb/s Tx-Power:2346 dBm
Retry min limit:8 RTS thr
ff Fragment thr
ff
Encryption key
ff
Link Quality:28/92 Signal level:-84 dBm Noise level:-100 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
but note the "Encryption key
ff" ????
Here is the content of my /etc/wlan0/wlan0cfg-MasTech
]# cat /etc/wlan/wlancfg-MasTech
#=======USER MIB SETTINGS=============================
# You can add the assignments for various MIB items
# of your choosing to this variable, separated by
# whitespace. The wlan-ng script will then set each one.
# Just uncomment the variable and set the assignments
# the way you want them.
#USER_MIBS="p2CnfRoamingMode=1 p2CnfShortPreamble=mixed"
#=======WEP===========================================
# [Dis/En]able WEP. Settings only matter if PrivacyInvoked is true
lnxreq_hostWEPEncrypt=true # true|false
lnxreq_hostWEPDecrypt=true # true|false
dot11PrivacyInvoked=true # true|false
dot11WEPDefaultKeyID=0 # 0|1|2|3
dot11ExcludeUnencrypted=true # true|false, in AP this means WEP is required.
# If PRIV_GENSTR is not empty, use PRIV_GENTSTR to generate
# keys (just a convenience)
PRIV_GENERATOR=/sbin/nwepgen # nwepgen, Neesus compatible
PRIV_KEY128=false # keylength to generate
PRIV_GENSTR=""
# or set them explicitly. Set genstr or keys, not both.
dot11WEPDefaultKey0=00:11:22:33:44 # format: xx:xx:xx:xx:xx or
dot11WEPDefaultKey1= # xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
dot11WEPDefaultKey2= # e.g. 01:20:03:40:05 or
dot11WEPDefaultKey3= # 01:02:03:04:05:06:07:08:09:0a:0b:0c:0d
#=======SELECT STATION MODE===================
IS_ADHOC=n # y|n, y - adhoc, n - infrastructure
#======= INFRASTRUCTURE STATION ===================
# What kind of authentication?
AuthType="sharedkey" # opensystem | sharedkey (requires WEP)
#======= ADHOC STATION ============================
BCNINT=100 # Beacon interval (in Kus)
CHANNEL=6 # DS channel for BSS (1-14, depends
# on regulatory domain)
BASICRATES="2 4" # Rates for mgmt&ctl frames (in 500Kb/s)
OPRATES="2 4 11 22" # Supported rates in BSS (in 500Kb/s)
and here is the content of /etc/wlan/wlan0.conf
# --------------------------------------------------------------------
# This file is sourced by all configuration scripts.
#
# The WLAN_DEVICES variable identifies the device names of each WLAN device.
# If you have more than one, make sure each one is identified in a whitespace
# separated list that's assigned to WLAN_DEVICES.
WLAN_DEVICES="wlan0"
# Below is the list of channels to scan, when we scan.
ChannelList="01:02:03:04:05:06:07:08:09:0a:0b:00:00:00"
# Below is the min and max time we linger on a channel during a scan.
ChannelMinTime=200
ChannelMaxTime=250
# And here we have the master scan toggle.
WLAN_SCAN=n
##########
# Note: To bind to a specific network, change the SSID to something different
# and create the file /etc/wlan/wlancfg-<SSID> with your network-
# specific settings. If this file is not present, the settings in
# /etc/wlancfg/wlancfg-DEFAULT are used.
#
# for example:
# SSID_wlan0="linux-wlan"
# This expects a file called "/etc/wlan/wlancfg-linux-wlan" to be present.
#
# Use a SSID of "" to associate with any network in range.
#########
SSID_wlan0="MasTech"
ENABLE_wlan0=y
#SSID_wlan1=""
#ENABLE_wlan1=n
#SSID_wlan2=""
#ENABLE_wlan2=n
Any thoughts ?????
I'm getting damn close now (with your help) I'm sure
Mike