How to determine chipset version?
Hi,
Just purchased a D-link WUA-1340 USB wireless adaptor. After finding some commands and using them, I'm able to determine its a Ralink chipset. The problem I'm having is I cant determine the version that I'm using. I've visited rt2x00.serialmonkey.com to look for drivers. I guessed it was rt2570 since its a USB adaptor. I compiled it, installed it (via make and make install). I performed modprobe rt2570 and plugged my device in. I check dmesg and get this: Code:
rt2570: module not supported by Novell, setting U taint flag. You guessed it, i'm running Suse 10. I checked "iwconfig" and device doesnt appear. It's listed in /etc/modules.conf as an alias. I have a cfg-rausb0 in /etc/sysconfig/network. Any suggestions to help me get the right driver? Thanks! |
Found out from Windows its an rt73 card so it needs that driver.
Ralink has the driver and the betta of rt2x00 has a similar driver but neither work. I get an error: usb 3-4: new high speed USB device using ehci_hcd and address 50 rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x0a failed for offset 0x0000 with error -71. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x09 failed for offset 0x0020 with error -71. rt73usb->rt73usb_probe: Error - Failed to initialize device. usb 3-4: USB disconnect, address 50 usb 3-4: new high speed USB device using ehci_hcd and address 51 rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x0a failed for offset 0x0000 with error -71. rt73usb->rt2x00_vendor_request: Error - vendor request error. Request 0x09 failed for offset 0x0020 with error -71. rt73usb->rt73usb_probe: Error - Failed to initialize device. usb 3-4: USB disconnect, address 51 |
All times are GMT -5. The time now is 12:37 PM. |