Detecting Wireless Network Cards
Hi,
I am trying to install an Belkin Wireless PCI Network Card 802.11b into my desktop. I am having problem getting RedHat 9 to recognise and install the card. lspci -v detects the PCI card as 00:0a.0 Network controller: Linksys: Unknown device 8201 (rev 11) Subsystem: Accton Technology Corporation: Unknown device 3201 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at e400 [size=256] Memory at dffff800 (32-bit, non-prefetchable) [size=1K] Expansion ROM at dffc0000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 /etc/pcmcia/config allready had the lines device "orinoco_cs" class "network" module "hermes", "orinoco", "orinoco_cs" but i added card "Belkin Accton Technology Wireless PCI Card" version "Accton Technology", "PCI" bind "orinoco_cs" and also changed to /etc/sysconfig/pcmcia to PCMCIA=yes PCIC=i82365 PCIC_OPTS= CORE_OPTS= cardctl ident returns no pcmcia driver in /proc/devices I am not 100% positive that the PCIC in /etc/sysconfig/pcmcia should be i82365, although that is the setting in all the examples I have seen. Any suggestions on what is going on? N.B. I have _not_ done anything i have not said here so if i missed something out that could be the problem. -S |
All times are GMT -5. The time now is 10:32 PM. |