LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Virtualization and Cloud (http://www.linuxquestions.org/questions/linux-virtualization-and-cloud-90/)
-   -   VPS centos Xen error then resize (http://www.linuxquestions.org/questions/linux-virtualization-and-cloud-90/vps-centos-xen-error-then-resize-4175421394/)

itdungpt 08-10-2012 09:33 AM

VPS centos Xen error then resize
 
error on VPS then risize virtual disk with hypervm:

Quote:

die [startinterchange] setuids failed: Could not resolve UID () or GID ()
exit level [die] [pid=6274] (setuids failed: Could not resolve UID () or GID ())
Starting killnash: [FAILED]
VPS use : centos 5.3 + cpanel + couldlinux

please help me fix it.

itdungpt 08-10-2012 12:39 PM

Bootdata ok (command line is root=/dev/sda1 ro console=xvc0 root=/dev/sda1 ro)
Linux version 2.6.18-408.el5.lve0.8.61.1xen (mockbuild@koji.cloudlinux.com) (gcc versio
n 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed Apr 18 07:56:22 EDT 2012
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000002ee800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 3024320
Kernel command line: root=/dev/sda1 ro console=xvc0 root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 3590.996 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Software IO TLB disabled
Memory: 12008940k/12296192k available (2576k kernel code, 278380k reserved, 1493k data,
208k init)
Calibrating delay using timer specific routine.. 8980.60 BogoMIPS (lpj=17961201)
Mount-cache hash table entries: 16384
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
(SMP-)alternatives turned off
Page beancounter hash is 1048576 entries.
Page locks hash is 262144 entries.
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Brought up 8 CPUs
Initializing CPU#7
migration_cost=19
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP bind hash table entries: 65536 (order: 8, 1048576 bytes)
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
type=2000 audit(1344641032.021:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
brd: module loaded
Xen virtual console successfully installed as xvc0
Bootdata ok (command line is root=/dev/sda1 ro console=xvc0 root=/dev/sda1 ro)
Linux version 2.6.18-408.el5.lve0.8.61.1xen (mockbuild@koji.cloudlinux.com) (gcc versio
n 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed Apr 18 07:56:22 EDT 2012
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000002ee800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 3024320
Kernel command line: root=/dev/sda1 ro console=xvc0 root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 3590.996 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Software IO TLB disabled
Memory: 12008940k/12296192k available (2576k kernel code, 278380k reserved, 1493k data,
208k init)
Calibrating delay using timer specific routine.. 8980.60 BogoMIPS (lpj=17961201)
Mount-cache hash table entries: 16384
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
(SMP-)alternatives turned off
Page beancounter hash is 1048576 entries.
Page locks hash is 262144 entries.
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Brought up 8 CPUs
Initializing CPU#7
migration_cost=19
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP bind hash table entries: 65536 (order: 8, 1048576 bytes)
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
type=2000 audit(1344641032.021:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
brd: module loaded
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
Initalizing network drop monitor service
Write protecting the kernel read-only data: 524k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading ehci-hcd.ko module
Loading ohci-hcd.ko module
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading jbd.ko module
Loading ext3.ko module
Loading xenblk.ko module
Registering block device major 8
Changing capacity of (8, 1) to 204800000 sectors
Changing capacity of (8, 2) to 1048576 sectors
Loading dm-mem-cache.ko module
Loading dm-mod.ko module
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
Loading dm-log.ko module
Loading dm-region_hash.ko module
Loading dm-message.ko module
Loading dm-raid45.ko module
device-mapper: dm-raid45: initialized v0.2594l
Scanning and configuring dmraid supported devices
Creating root device.
Mounting root filesystem.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
Welcome to CloudLinux Server
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock : Sat Aug 11 06:23:57 ICT 2012 [ OK ]
Starting udev: MAKEDEV: no such user: root
cp: cannot create special file `/dev/console': File exists
cp: cannot create special file `/dev/core': File exists
cp: cannot create special file `/dev/null': File exists
cp: cannot create special file `/dev/ptmx': File exists
cp: cannot create special file `/dev/ram0': File exists
cp: cannot create special file `/dev/ram1': File exists
cp: cannot create special file `/dev/tty': File exists
cp: cannot create special file `/dev/urandom': File exists
cp: cannot create special file `/dev/zero': File exists
[ OK ]
Setting hostname vdc145.sieutocviet.com: [ OK ]
No devices found
Setting up Logical Volume Management: [ OK ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: Superblock last mount time is in the future. FIXED.
/dev/sda1: Superblock last write time is in the future. FIXED.
/dev/sda1: clean, 3188867/12812288 files, 22427253/25600000 blocks
[ OK ]
Remounting root filesystem in read-write mode: [ OK ]
Mounting local filesystems: [ OK ]
Enabling local filesystem quotas: [ OK ]
rm: cannot remove `/var/run/chkservd/restart_track': Is a directory
rm: cannot remove `/var/run/proxyexec/cagefs.sock': Is a directory
rm: cannot remove `/var/run/restartsrv/startup': Is a directory
getpwnam failed for root
chgrp: invalid group `utmp'
chown: `root:root': invalid user
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting sysstat: Calling the system activity data collector (sadc):
[ OK ]
Starting securetmp: *** Notice *** No loop module detected
If the loopback block device is built as a module, try running `modprobe loop` as root
via ssh and running this script again.
If the loopback block device is built into the kernel itself, you can ignore this messa
ge.
*** Notice *** No working loopback device files found. Try running `modprobe loop` as r
oot via ssh and running this script again.
[ OK ]
[ OK ] iSCSI daemon: [ OK ]
[ OK ]
Applying iptables firewall rules: [ OK ]
loading LVE module
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: RTNETLINK answers: File exists
RTNETLINK answers: File exists
[ OK ]
Starting lvectl: ubc.dentry_check = -1
[ OK ]
whoami: cannot find name for user ID 0
Starting /usr/sbin/proxyexec: Script must run under root only
[FAILED]
Starting CageFS: whoami: cannot find name for user ID 0
whoami: cannot find name for user ID 0
Error while executing "service proxyexecd restart"
[FAILED]
Starting system logger: [ OK ]
Starting kernel logger: [PASSED]
iscsid (pid 4335) is running...
Setting up iSCSI targets: iscsiadm: No records found!
[ OK ]
Starting courier-authlib: Starting Courier authentication services: authdaemond
[ OK ]
/etc/rc3.d/S19rpcgssd: line 33: [: too many arguments
Starting lvestats: [ OK ]
Registering non-native binary handler for Qemu
Starting sshd: Privilege separation user sshd does not exist
[FAILED]
Starting mysql: Starting MySQL. ERROR! Manager of pid-file quit without updating file.
[FAILED]
Starting courier-imap: Starting Courier-IMAP server: imap imap-ssl pop3 pop3-ssl
[ OK ]
Starting exim: 2012-08-11 06:24:19 Exim configuration error in line 58 of /etc/exim.con
f:
user cpaneleximfilter was not found
[FAILED]
Starting httpd: 2012-08-11 06:24:20.806 [NOTICE] Detected XEN VM
[OK] Your trial license key will expire in 0 days!
[ERROR] Failed to start litespeed!
litespeed: no process killed
2012-08-11 06:24:36.143 [NOTICE] Detected XEN VM
[OK] Your trial license key will expire in 0 days!
[ERROR] Failed to start litespeed!
[FAILED]
Starting pure-config.pl: Running: /usr/sbin/pure-ftpd -O clf:/var/log/xferlog --daemoni
ze -A -c50 -B -C8 -D -fftp -H -I15 -lextauth:/var/run/ftpd.sock -L10000:8 -m4 -s -U133:
022 -u100 -Oxferlog:/usr/local/apache/domlogs/ftpxferlog -k99 -Z -Y1 -JHIGH:MEDIUM:+TLS
v1:!SSLv2:+SSLv3
[ OK ]
Starting pure-authd:
Starting lsws: [FAILED]
Starting bandmin: [ OK ]
Starting cPanel services: Waiting for cpsrvd to shutdown ... ...Done
Waiting for cpsrvd-ssl to shutdown ... ...Done
Waiting for whostmgrd to shutdown ... ...Done
Starting cpsrvd.
[ OK ]
Starting cPanel brute force detector services: [ OK ]
Starting cPanel dav services: [ OK ]
Starting pop3 services: Waiting for cppop to shutdown ... ...Done
Waiting for cppop-ssl to shutdown ... ...Done
[ OK ]
Starting cPanel Chat services:

Starting InterChange services: [ OK ]
Starting cPanel ssl services: Using Native SSL support (stunnel not needed)
[ OK ]
Starting cPanel Queue services: [ OK ]


All times are GMT -5. The time now is 11:06 AM.