LinuxQuestions.org
Go Job Hunting at the LQ Job Marketplace
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Virtualization and Cloud
User Name
Password
Linux - Virtualization and Cloud This forum is for the discussion of all topics relating to Linux Virtualization and Linux Cloud platforms. Xen, KVM, OpenVZ, VirtualBox, VMware, Linux-VServer and all other Linux Virtualization platforms are welcome. OpenStack, CloudStack, ownCloud, Cloud Foundry, Eucalyptus, Nimbus, OpenNebula and all other Linux Cloud platforms are welcome. Note that questions relating solely to non-Linux OS's should be asked in the General forum.

Notices

Reply
 
Search this Thread
Old 03-18-2013, 07:06 PM   #1
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Rep: Reputation: 0
Fedora 18 Gnome switched to fallback mode after installing VirtualBox guest additions


Hello!

I'm currently running a Fedora 18 virtual machine, using VirtualBox (v4.2.10) as virtualization software on a Windows 7 host.

After installing Fedora, the Gnome 3 Shell environment worked perfectly fine. However after I installed the VirtualBox guest additions, Gnome went into 'fallback' mode, and refuses to go back to 'standard' mode.

I haven't changed or installed anything else other than the VB guest additions prior to the problem.

Some of the things I've tried so far is to disable SELinux, and a reinstallation of the Gnome Shell, unfortunately without luck.

What could be the cause of the problem?

Thanks in advance!
 
Old 03-19-2013, 09:03 PM   #2
frankbell
Guru
 
Registered: Jan 2006
Location: Virginia, USA
Distribution: Slackware, Mageia, Mint
Posts: 8,098

Rep: Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538Reputation: 1538
Fallback mode occurs when you don't have enough memory to run regular Gnome 3.

Are you starting the vbox kernel and process on bootup?

My guess would be that Guest Additions took just enough extra memory to cause this. Running top in a terminal should give you some hints where the memory is going.
 
Old 04-05-2013, 01:58 AM   #3
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Original Poster
Rep: Reputation: 0
Hello frank, sorry for my late response.

The virtual machine has been assigned 2 GB of memory, and on average it only consumes about 25% of it.
Is there perhaps something else in the Guest Additions that could be the cause of the issue?
 
Old 04-05-2013, 01:57 PM   #4
gradinaruvasile
Member
 
Registered: Apr 2010
Location: Cluj, Romania
Distribution: Debian Testing
Posts: 515

Rep: Reputation: 102Reputation: 102
Quote:
Originally Posted by frankbell View Post
Fallback mode occurs when you don't have enough memory to run regular Gnome 3.
I think this isnt correct (or at least not entirely).

Gnome 3's "standard" mode requires hardware acceleration. If its missing, you will get fallback mode.
I assume that the OS had a working video driver OOTB. Guest Additions is a bunch of drivers too, maybe it buggered the driver that was working.
 
Old 04-06-2013, 05:35 AM   #5
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Original Poster
Rep: Reputation: 0
I've been browsing through the VB User Manual searching for more information about 3D acceleration for guests, and I may have found the cause of the issue. The VB User Manual states that;

Quote:
With this feature, if an application inside your virtual machine uses 3D features through the OpenGL or Direct3D 8/9 programming interfaces, instead of emulating them in software (which would be slow), VirtualBox will attempt to use your host's 3D hardware. This works for all supported host platforms (Windows, Mac, Linux, Solaris), provided that your host operating system can make use of your accelerated 3D hardware in the first place.

Quote:
... instead of emulating them in software (which would be slow) ...
I assumed that this is what it has been doing while the Guest Additions weren't installed yet. After I installed the Guest Additions it tried to use the host's 3D hardware, but for some reason it fails to do so. (3D acceleration is enabled in the VM settings, and the video memory is set to maximum (128 MB)).

To test this assumption, I tried to disable the 3D acceleration in the VM settings (to force it to switch back to software emulation)... and it worked, Gnome 3 switched back to standard mode!

So in conclusion, when 3D acceleration is enabled with the Guest Additions installed, it tries to use the host 3D hardware (as expected), but it just fails to do so.

But I still can't figure out why (3D acceleration is working perfectly fine on the host OS)... what could be the cause of this?
 
Old 04-06-2013, 08:56 AM   #6
gradinaruvasile
Member
 
Registered: Apr 2010
Location: Cluj, Romania
Distribution: Debian Testing
Posts: 515

Rep: Reputation: 102Reputation: 102
What is the output of:

Code:
lspci -v
Run in a terminal in the GUEST OS?
 
Old 04-06-2013, 09:57 AM   #7
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Original Poster
Rep: Reputation: 0
Output:

Code:
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
	Flags: fast devsel

00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
	Flags: bus master, medium devsel, latency 0

00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter (prog-if 00 [VGA controller])
	Flags: bus master, fast devsel, latency 0, IRQ 18
	Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled]

00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
	Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
	Memory at f0000000 (32-bit, non-prefetchable) [size=128K]
	I/O ports at d000 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: e1000

00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
	Flags: bus master, fast devsel, latency 0, IRQ 20
	I/O ports at d020 [size=32]
	Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
	Memory at f0800000 (32-bit, prefetchable) [size=16K]
	Kernel driver in use: vboxguest

00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
	Subsystem: Intel Corporation Device 0000
	Flags: bus master, medium devsel, latency 64, IRQ 21
	I/O ports at d100 [size=256]
	I/O ports at d200 [size=64]
	Kernel driver in use: snd_intel8x0

00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])
	Flags: bus master, fast devsel, latency 64, IRQ 22
	Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
	Flags: bus master, medium devsel, latency 0, IRQ 9

00:0b.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (prog-if 20 [EHCI])
	Flags: bus master, fast devsel, latency 64, IRQ 19
	Memory at f0805000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ehci-pci

00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
	Flags: bus master, fast devsel, latency 64, IRQ 21
	I/O ports at d240 [size=8]
	I/O ports at 0000
	I/O ports at d250 [size=8]
	I/O ports at 0000
	I/O ports at d260 [size=16]
	Memory at f0806000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
 
Old 04-06-2013, 12:06 PM   #8
gradinaruvasile
Member
 
Registered: Apr 2010
Location: Cluj, Romania
Distribution: Debian Testing
Posts: 515

Rep: Reputation: 102Reputation: 102
This with working gnome standard mode?
 
Old 04-06-2013, 12:17 PM   #9
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Original Poster
Rep: Reputation: 0
That was in fallback mode, here is the output in standard mode (3D acceleration disabled):

Code:
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
	Flags: fast devsel

00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
	Flags: bus master, medium devsel, latency 0

00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter (prog-if 00 [VGA controller])
	Flags: bus master, fast devsel, latency 0, IRQ 18
	Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at <unassigned> [disabled]

00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
	Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
	Memory at f0000000 (32-bit, non-prefetchable) [size=128K]
	I/O ports at d000 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: e1000

00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service
	Flags: bus master, fast devsel, latency 0, IRQ 20
	I/O ports at d020 [size=32]
	Memory at f0400000 (32-bit, non-prefetchable) [size=4M]
	Memory at f0800000 (32-bit, prefetchable) [size=16K]
	Kernel driver in use: vboxguest

00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)
	Subsystem: Intel Corporation Device 0000
	Flags: bus master, medium devsel, latency 64, IRQ 21
	I/O ports at d100 [size=256]
	I/O ports at d200 [size=64]
	Kernel driver in use: snd_intel8x0

00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])
	Flags: bus master, fast devsel, latency 64, IRQ 22
	Memory at f0804000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd

00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
	Flags: bus master, medium devsel, latency 0, IRQ 9

00:0b.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (prog-if 20 [EHCI])
	Flags: bus master, fast devsel, latency 64, IRQ 19
	Memory at f0805000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ehci-pci

00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])
	Flags: bus master, fast devsel, latency 64, IRQ 21
	I/O ports at d240 [size=8]
	I/O ports at 0000
	I/O ports at d250 [size=8]
	I/O ports at 0000
	I/O ports at d260 [size=16]
	Memory at f0806000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
(The output appears to be identical).

Last edited by Thomas.; 04-06-2013 at 12:20 PM.
 
Old 04-06-2013, 12:21 PM   #10
gradinaruvasile
Member
 
Registered: Apr 2010
Location: Cluj, Romania
Distribution: Debian Testing
Posts: 515

Rep: Reputation: 102Reputation: 102
Do you have the kernel headers installed? In order to be able to install the additions, you will need them.

https://forums.virtualbox.org/viewtopic.php?f=3&t=43635
 
Old 04-06-2013, 12:29 PM   #11
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Original Poster
Rep: Reputation: 0
The kernel headers are installed.
 
Old 04-06-2013, 01:53 PM   #12
gradinaruvasile
Member
 
Registered: Apr 2010
Location: Cluj, Romania
Distribution: Debian Testing
Posts: 515

Rep: Reputation: 102Reputation: 102
Well, unfortunately the lspci output thats purpose was to see which kernel modules are loaded for each device doesnt show any loaded modules for the video device. So no luck here.

A typical way to see if direct rendering is active in a Linux OS is

Code:
glxinfo
This will give a lot of extraneous output, but the interesting parts are the following entries (copy paste from my computer):

Code:
direct rendering: Yes
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 7560D
OpenGL version string: 4.2.12002 Compatibility Profile Context 9.012
"direct rendering" says if there are 3d capabilities available to the x server.
The OpenGL strings are interesting because they identify the rendering driver.

Also, the /var/log/Xorg.0.log file has information about the situation and most likely contains the loaded modules for the video card.

If you can provide these infos for both situations, maybe will get to the cause of this.
 
Old 04-06-2013, 07:38 PM   #13
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Original Poster
Rep: Reputation: 0
This is the result in fallback mode (3D acceleration enabled):

glxinfo (I included the rest of the output as well because I noticed quite a lot of OpenGL warnings, I'm not sure if it's relevant, but I thought it'd be best to include it):


Code:
OpenGL Warning: glFlushVertexArrayRangeNV not found in mesa table
OpenGL Warning: glVertexArrayRangeNV not found in mesa table
OpenGL Warning: glCombinerInputNV not found in mesa table
OpenGL Warning: glCombinerOutputNV not found in mesa table
OpenGL Warning: glCombinerParameterfNV not found in mesa table
OpenGL Warning: glCombinerParameterfvNV not found in mesa table
OpenGL Warning: glCombinerParameteriNV not found in mesa table
OpenGL Warning: glCombinerParameterivNV not found in mesa table
OpenGL Warning: glFinalCombinerInputNV not found in mesa table
OpenGL Warning: glGetCombinerInputParameterfvNV not found in mesa table
OpenGL Warning: glGetCombinerInputParameterivNV not found in mesa table
OpenGL Warning: glGetCombinerOutputParameterfvNV not found in mesa table
OpenGL Warning: glGetCombinerOutputParameterivNV not found in mesa table
OpenGL Warning: glGetFinalCombinerInputParameterfvNV not found in mesa table
OpenGL Warning: glGetFinalCombinerInputParameterivNV not found in mesa table
OpenGL Warning: glDeleteFencesNV not found in mesa table
OpenGL Warning: glFinishFenceNV not found in mesa table
OpenGL Warning: glGenFencesNV not found in mesa table
OpenGL Warning: glGetFenceivNV not found in mesa table
OpenGL Warning: glIsFenceNV not found in mesa table
OpenGL Warning: glSetFenceNV not found in mesa table
OpenGL Warning: glTestFenceNV not found in mesa table
Warning: GL error 0x505 at line 913
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: Chromium
server glx version string: 1.3 Chromium
server glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_texture_from_pixmap, GLX_SGIX_fbconfig
client glx vendor string: Chromium
client glx version string: 1.3 Chromium
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_texture_from_pixmap, GLX_SGIX_fbconfig
GLX version: 1.3
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_texture_from_pixmap, GLX_SGIX_fbconfig
OpenGL vendor string: Humper
OpenGL renderer string: Chromium
OpenGL version string: 2.1 Chromium 1.9
OpenGL shading language version string: 1.40  - Intel Build 8.15.10.2372

Xorg.0.log:

Code:
X.Org X Server 1.13.3
...
[    22.397] X Protocol Version 11, Revision 0
[    22.397] Build Operating System:  2.6.32-279.19.1.el6.x86_64 
[    22.397] Current Operating System: Linux localhost.localdomain 3.8.5-201.fc18.x86_64 #1 SMP Thu Mar 28 21:01:19 UTC 2013 x86_64
[    22.397] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.5-201.fc18.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rd.lvm.lv=fedora/root rhgb quiet LANG=nl_NL.UTF-8
[    22.397] Build Date: 22 March 2013  12:56:03PM
[    22.397] Build ID: xorg-x11-server 1.13.3-2.fc18 
[    22.397] Current version of pixman: 0.28.0
[    22.397] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    22.397] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.397] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr  7 00:42:57 2013
[    22.499] (==) Using config file: "/etc/X11/xorg.conf"
[    22.499] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    22.499] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    22.673] (==) No Layout section.  Using the first Screen section.
[    22.673] (**) |-->Screen "Screen[0]" (0)
[    22.673] (**) |   |-->Monitor "Monitor[0]"
[    22.673] (**) |   |-->Device "Device[0]"
[    22.673] (==) Automatically adding devices
[    22.673] (==) Automatically enabling devices
[    22.673] (==) Automatically adding GPU devices
[    22.674] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
[    22.674] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    22.674] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    22.674] (II) Loader magic: 0x801d00
[    22.674] (II) Module ABI versions:
[    22.674] 	X.Org ANSI C Emulation: 0.4
[    22.674] 	X.Org Video Driver: 13.1
[    22.674] 	X.Org XInput driver : 18.0
[    22.674] 	X.Org Server Extension : 7.0
[    22.675] (II) config/udev: Adding drm device (/dev/dri/card0)
[    22.702] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728, BIOS @ 0x????????/131072
[    22.717] Initializing built-in extension Generic Event Extension
[    22.717] Initializing built-in extension SHAPE
[    22.717] Initializing built-in extension MIT-SHM
[    22.717] Initializing built-in extension XInputExtension
[    22.717] Initializing built-in extension XTEST
[    22.717] Initializing built-in extension BIG-REQUESTS
[    22.717] Initializing built-in extension SYNC
[    22.717] Initializing built-in extension XKEYBOARD
[    22.717] Initializing built-in extension XC-MISC
[    22.717] Initializing built-in extension XINERAMA
[    22.717] Initializing built-in extension XFIXES
[    22.717] Initializing built-in extension RENDER
[    22.717] Initializing built-in extension RANDR
[    22.717] Initializing built-in extension COMPOSITE
[    22.717] Initializing built-in extension DAMAGE
[    22.717] Initializing built-in extension MIT-SCREEN-SAVER
[    22.717] Initializing built-in extension DOUBLE-BUFFER
[    22.717] Initializing built-in extension RECORD
[    22.717] Initializing built-in extension DPMS
[    22.717] Initializing built-in extension X-Resource
[    22.717] Initializing built-in extension XVideo
[    22.717] Initializing built-in extension XVideo-MotionCompensation
[    22.717] Initializing built-in extension SELinux
[    22.717] Initializing built-in extension XFree86-VidModeExtension
[    22.717] Initializing built-in extension XFree86-DGA
[    22.717] Initializing built-in extension XFree86-DRI
[    22.717] Initializing built-in extension DRI2
[    22.717] (II) LoadModule: "glx"
[    22.804] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    22.868] (II) Module glx: vendor="X.Org Foundation"
[    22.868] 	compiled for 1.13.3, module version = 1.0.0
[    22.868] 	ABI class: X.Org Server Extension, version 7.0
[    22.868] (==) AIGLX enabled
[    22.880] Loading extension GLX
[    22.880] (II) LoadModule: "vboxvideo"
[    22.880] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[    22.902] (II) Module vboxvideo: vendor="Oracle Corporation"
[    22.902] 	compiled for 10.13.0, module version = 1.0.1
[    22.902] 	Module class: X.Org Video Driver
[    22.902] 	ABI class: X.Org Video Driver, version 13.0
[    22.902] (**) Load address of symbol "VBOXVIDEO" is 0x7fafa6c73300
[    22.902] (II) VBoxVideo: guest driver for VirtualBox: vbox
[    22.902] (++) using VT number 1

[    22.902] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.2.10
[    22.902] (II) Loading sub module "ramdac"
[    22.902] (II) LoadModule: "ramdac"
[    22.902] (II) Module "ramdac" already built-in
[    22.902] (II) Loading sub module "fb"
[    22.902] (II) LoadModule: "fb"
[    22.902] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    22.935] (II) Module fb: vendor="X.Org Foundation"
[    22.935] 	compiled for 1.13.3, module version = 1.0.0
[    22.935] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.935] (II) Loading sub module "shadowfb"
[    22.935] (II) LoadModule: "shadowfb"
[    22.935] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[    22.948] (II) Module shadowfb: vendor="X.Org Foundation"
[    22.948] 	compiled for 1.13.3, module version = 1.0.0
[    22.948] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    22.948] (II) Loading sub module "vgahw"
[    22.948] (II) LoadModule: "vgahw"
[    22.948] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[    22.957] (II) Module vgahw: vendor="X.Org Foundation"
[    22.957] 	compiled for 1.13.3, module version = 0.1.0
[    22.957] 	ABI class: X.Org Video Driver, version 13.1
[    22.957] (II) Loading sub module "dri"
[    22.957] (II) LoadModule: "dri"
[    22.957] (II) Module "dri" already built-in
[    22.959] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[    22.959] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBoxInitialMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBox-1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBox-1600x1200"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[    22.959] (**) VBoxVideo(0):  Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[    22.959] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[    22.959] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    22.959] (==) VBoxVideo(0): RGB weight 888
[    22.959] (==) VBoxVideo(0): Default visual is TrueColor
[    22.959] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[    22.959] (==) VBoxVideo(0): DPI set to (96, 96)
[    22.959] (--) Depth 24 pixmap format is 32 bpp
[    23.016] (II) [drm] DRM interface version 1.4
[    23.016] (II) [drm] DRM open master succeeded.
[    23.017] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[    23.017] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[    23.017] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[    23.017] (II) VBoxVideo(0): X context handle = 0x1
[    23.017] (II) VBoxVideo(0): [drm] installed DRM signal handler
[    23.017] (II) VBoxVideo(0): visual configurations initialized
[    23.049] (II) VBoxVideo(0): Requested monitor count: 1
[    23.050] (II) VBoxVideo(0): Output VBOX0 using monitor section Monitor[0]
[    23.050] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[    23.051] (II) VBoxVideo(0): EDID for output VBOX0
[    23.051] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 50333014
[    23.051] (II) VBoxVideo(0): Year: 1990  Week: 1
[    23.051] (II) VBoxVideo(0): EDID Version: 1.3
[    23.051] (II) VBoxVideo(0): Digital Display Input
[    23.051] (II) VBoxVideo(0): Indeterminate output size
[    23.051] (II) VBoxVideo(0): Gamma: 2.20
[    23.051] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[    23.051] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    23.051] (II) VBoxVideo(0): Default color space is primary color space
[    23.051] (II) VBoxVideo(0): First detailed timing is preferred mode
[    23.051] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    23.051] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    23.051] (II) VBoxVideo(0): Manufacturer's mask: 0
[    23.051] (II) VBoxVideo(0): Supported detailed timing:
[    23.051] (II) VBoxVideo(0): clock: 63.7 MHz   Image Size:  0 x 0 mm
[    23.051] (II) VBoxVideo(0): h_active: 1366  h_sync: 1368  h_sync_end 1370 h_blank_end 1372 h_border: 0
[    23.051] (II) VBoxVideo(0): v_active: 768  v_sync: 770  v_sync_end 772 v_blanking: 774 v_border: 0
[    23.051] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[    23.052] (II) VBoxVideo(0): Monitor name: VBOX monitor
[    23.052] (II) VBoxVideo(0): EDID (in hex):
[    23.052] (II) VBoxVideo(0): 	00ffffffffffff005858000056050003
[    23.052] (II) VBoxVideo(0): 	0100010380000078eeee91a3544c9926
[    23.052] (II) VBoxVideo(0): 	0f505400000001010101010101010101
[    23.052] (II) VBoxVideo(0): 	010101010101e3185606500006300202
[    23.052] (II) VBoxVideo(0): 	2200000000000000000000fd0000c800
[    23.052] (II) VBoxVideo(0): 	c864000a202020202020000000fc0056
[    23.052] (II) VBoxVideo(0): 	424f58206d6f6e69746f720a00000010
[    23.052] (II) VBoxVideo(0): 	000a2020202020202020202020200004
[    23.053] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[    23.053] (II) VBoxVideo(0): Modeline "1366x768"x60.0   63.72  1366 1368 1370 1372  768 770 772 774 (46.4 kHz Pb)
[    23.053] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[    23.053] (II) VBoxVideo(0): Modeline "1440x1050"x60.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[    23.053] (II) VBoxVideo(0): Modeline "1280x960"x60.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[    23.053] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[    23.053] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[    23.053] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[    23.053] (II) VBoxVideo(0): Output VBOX0 connected
[    23.053] (II) VBoxVideo(0): Using exact sizes for initial modes
[    23.053] (II) VBoxVideo(0): Output VBOX0 using initial mode 1366x768 +0+0
[    23.053] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    23.053] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.064] (==) VBoxVideo(0): DPMS enabled
[    23.064] (II) VBoxVideo(0): [DRI] installation complete
[    23.064] (--) RandR disabled
[    23.079] (II) SELinux: Disabled on system
[    23.080] (II) AIGLX: Screen 0 is not DRI2 capable
[    23.080] drmOpenDevice: node name is /dev/dri/card0
[    23.080] drmOpenDevice: open result is 12, (OK)
[    23.080] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    23.080] drmOpenDevice: node name is /dev/dri/card0
[    23.080] drmOpenDevice: open result is 12, (OK)
[    23.080] drmOpenByBusid: drmOpenMinor returns 12
[    23.080] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[    23.080] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    23.330] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[    23.330] (II) The file referenced, is *NOT* loaded
[    23.330] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[    23.332] (EE) AIGLX error: vboxvideo does not export required DRI extension
[    23.335] (EE) AIGLX: reverting to software rendering
[    25.499] (II) AIGLX: Loaded and initialized swrast
[    25.499] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    25.499] (II) VBoxVideo(0): Setting screen physical size to 361 x 203
[    26.984] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    26.984] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.984] (**) Power Button: Applying InputClass "anaconda-keyboard"
[    26.984] (II) LoadModule: "evdev"
[    26.984] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    27.022] (II) Module evdev: vendor="X.Org Foundation"
[    27.022] 	compiled for 1.13.1, module version = 2.7.3
[    27.022] 	Module class: X.Org XInput Driver
[    27.022] 	ABI class: X.Org XInput driver, version 18.0
[    27.022] (II) Using input driver 'evdev' for 'Power Button'
[    27.022] (**) Power Button: always reports core events
[    27.022] (**) evdev: Power Button: Device: "/dev/input/event0"
[    27.022] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.022] (--) evdev: Power Button: Found keys
[    27.022] (II) evdev: Power Button: Configuring as keyboard
[    27.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[    27.022] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.022] (**) Option "xkb_rules" "evdev"
[    27.022] (**) Option "xkb_model" "evdev"
[    27.022] (**) Option "xkb_layout" "us,nl"
[    27.022] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    27.321] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    27.321] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    27.321] (**) Sleep Button: Applying InputClass "anaconda-keyboard"
[    27.321] (II) Using input driver 'evdev' for 'Sleep Button'
[    27.321] (**) Sleep Button: always reports core events
[    27.321] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[    27.321] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    27.321] (--) evdev: Sleep Button: Found keys
[    27.321] (II) evdev: Sleep Button: Configuring as keyboard
[    27.321] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[    27.321] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    27.321] (**) Option "xkb_rules" "evdev"
[    27.321] (**) Option "xkb_model" "evdev"
[    27.321] (**) Option "xkb_layout" "us,nl"
[    27.321] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    27.322] (II) config/udev: Adding drm device (/dev/dri/card0)
[    27.322] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[    27.322] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[    27.322] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[    27.322] (**) VirtualBox mouse integration: always reports core events
[    27.322] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event5"
[    27.322] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[    27.322] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[    27.322] (--) evdev: VirtualBox mouse integration: Found absolute axes
[    27.322] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[    27.322] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[    27.322] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[    27.322] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[    27.322] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.322] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input5/event5"
[    27.322] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[    27.322] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[    27.322] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[    27.322] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[    27.322] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[    27.322] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[    27.324] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event4)
[    27.324] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[    27.324] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[    27.324] (**) VirtualBox USB Tablet: always reports core events
[    27.324] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event4"
[    27.324] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[    27.324] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[    27.324] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[    27.324] (--) evdev: VirtualBox USB Tablet: Found relative axes
[    27.324] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[    27.324] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[    27.324] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[    27.324] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[    27.324] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[    27.324] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[    27.324] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.324] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input4/event4"
[    27.324] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[    27.324] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[    27.324] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[    27.324] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[    27.324] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[    27.324] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[    27.324] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[    27.325] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[    27.325] (II) No input driver specified, ignoring this device.
[    27.325] (II) This device may have been added with another device file.
[    27.325] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    27.325] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.325] (**) AT Translated Set 2 keyboard: Applying InputClass "anaconda-keyboard"
[    27.325] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.325] (**) AT Translated Set 2 keyboard: always reports core events
[    27.325] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    27.325] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.325] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.325] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.325] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    27.325] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    27.325] (**) Option "xkb_rules" "evdev"
[    27.325] (**) Option "xkb_model" "evdev"
[    27.325] (**) Option "xkb_layout" "us,nl"
[    27.325] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    27.326] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
[    27.326] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[    27.326] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[    27.326] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[    27.326] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3"
[    27.326] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[    27.326] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[    27.326] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[    27.326] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[    27.326] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[    27.326] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[    27.326] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[    27.326] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[    27.326] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.326] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
[    27.326] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[    27.326] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[    27.327] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[    27.327] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[    27.327] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[    27.327] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[    27.327] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[    27.327] (II) No input driver specified, ignoring this device.
[    27.327] (II) This device may have been added with another device file.
[    27.369] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    27.369] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    27.369] (II) VBoxVideo(0): Using hsync ranges from config file
[    27.369] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    27.369] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    27.369] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[    36.639] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    36.639] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    36.639] (II) VBoxVideo(0): Using hsync ranges from config file
[    36.639] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    36.639] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    36.639] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   322.302] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   322.302] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[   322.302] (II) VBoxVideo(0): Using hsync ranges from config file
[   322.302] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   322.302] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   322.302] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   322.315] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   322.315] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[   322.315] (II) VBoxVideo(0): Using hsync ranges from config file
[   322.315] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   322.315] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   322.315] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   323.267] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   323.267] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[   323.267] (II) VBoxVideo(0): Using hsync ranges from config file
[   323.267] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   323.267] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   323.267] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   325.512] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   325.512] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[   325.512] (II) VBoxVideo(0): Using hsync ranges from config file
[   325.512] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   325.512] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   325.512] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[   327.957] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[   327.959] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[   327.959] (II) VBoxVideo(0): Using hsync ranges from config file
[   327.959] (II) VBoxVideo(0): Using vrefresh ranges from config file
[   327.959] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[   327.959] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)

Last edited by Thomas.; 04-06-2013 at 07:47 PM.
 
Old 04-06-2013, 07:44 PM   #14
Thomas.
LQ Newbie
 
Registered: Nov 2010
Location: The Netherlands
Distribution: Fedora
Posts: 12

Original Poster
Rep: Reputation: 0
Result in standard mode (3D acceleration disabled):

glxinfo:

Code:
name of display: :0
OpenGL Warning: Failed to connect to host. Make sure 3D acceleration is enabled for this VM.
libGL error: failed to load driver: vboxvideo
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, 
    GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
    GLX_SGIX_pbuffer, GLX_SGI_make_current_read
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile, 
    GLX_ARB_create_context_robustness, GLX_ARB_framebuffer_sRGB, 
    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
    GLX_EXT_create_context_es2_profile, GLX_EXT_framebuffer_sRGB, 
    GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, 
    GLX_EXT_visual_rating, GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, 
    GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control, 
    GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGIS_multisample, 
    GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, 
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync
GLX version: 1.4
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
    GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, 
    GLX_MESA_multithread_makecurrent, GLX_OML_swap_method, 
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
    GLX_SGI_make_current_read
OpenGL vendor string: VMware, Inc.
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits)
OpenGL version string: 2.1 Mesa 9.1
OpenGL shading language version string: 1.20

Xorg.0.log:

Code:
[     6.992] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[     6.994] X Protocol Version 11, Revision 0
[     6.994] Build Operating System:  2.6.32-279.19.1.el6.x86_64 
[     6.994] Current Operating System: Linux localhost.localdomain 3.8.5-201.fc18.x86_64 #1 SMP Thu Mar 28 21:01:19 UTC 2013 x86_64
[     6.994] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.5-201.fc18.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rd.lvm.lv=fedora/root rhgb quiet LANG=nl_NL.UTF-8
[     6.994] Build Date: 22 March 2013  12:56:03PM
[     6.994] Build ID: xorg-x11-server 1.13.3-2.fc18 
[     6.994] Current version of pixman: 0.28.0
[     6.994] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.994] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.994] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr  7 01:40:37 2013
[     6.996] (==) Using config file: "/etc/X11/xorg.conf"
[     6.996] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     6.996] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     7.001] (==) No Layout section.  Using the first Screen section.
[     7.001] (**) |-->Screen "Screen[0]" (0)
[     7.001] (**) |   |-->Monitor "Monitor[0]"
[     7.001] (**) |   |-->Device "Device[0]"
[     7.001] (==) Automatically adding devices
[     7.001] (==) Automatically enabling devices
[     7.001] (==) Automatically adding GPU devices
[     7.001] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
[     7.001] (==) ModulePath set to "/usr/lib64/xorg/modules"
[     7.001] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     7.001] (II) Loader magic: 0x801d00
[     7.001] (II) Module ABI versions:
[     7.001] 	X.Org ANSI C Emulation: 0.4
[     7.001] 	X.Org Video Driver: 13.1
[     7.001] 	X.Org XInput driver : 18.0
[     7.001] 	X.Org Server Extension : 7.0
[     7.002] (II) config/udev: Adding drm device (/dev/dri/card0)
[     7.019] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728, BIOS @ 0x????????/131072
[     7.020] Initializing built-in extension Generic Event Extension
[     7.020] Initializing built-in extension SHAPE
[     7.020] Initializing built-in extension MIT-SHM
[     7.020] Initializing built-in extension XInputExtension
[     7.020] Initializing built-in extension XTEST
[     7.020] Initializing built-in extension BIG-REQUESTS
[     7.020] Initializing built-in extension SYNC
[     7.020] Initializing built-in extension XKEYBOARD
[     7.020] Initializing built-in extension XC-MISC
[     7.020] Initializing built-in extension XINERAMA
[     7.020] Initializing built-in extension XFIXES
[     7.020] Initializing built-in extension RENDER
[     7.020] Initializing built-in extension RANDR
[     7.020] Initializing built-in extension COMPOSITE
[     7.020] Initializing built-in extension DAMAGE
[     7.020] Initializing built-in extension MIT-SCREEN-SAVER
[     7.020] Initializing built-in extension DOUBLE-BUFFER
[     7.020] Initializing built-in extension RECORD
[     7.020] Initializing built-in extension DPMS
[     7.020] Initializing built-in extension X-Resource
[     7.020] Initializing built-in extension XVideo
[     7.020] Initializing built-in extension XVideo-MotionCompensation
[     7.020] Initializing built-in extension SELinux
[     7.020] Initializing built-in extension XFree86-VidModeExtension
[     7.020] Initializing built-in extension XFree86-DGA
[     7.020] Initializing built-in extension XFree86-DRI
[     7.020] Initializing built-in extension DRI2
[     7.020] (II) LoadModule: "glx"
[     7.024] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[     7.028] (II) Module glx: vendor="X.Org Foundation"
[     7.028] 	compiled for 1.13.3, module version = 1.0.0
[     7.028] 	ABI class: X.Org Server Extension, version 7.0
[     7.028] (==) AIGLX enabled
[     7.028] Loading extension GLX
[     7.028] (II) LoadModule: "vboxvideo"
[     7.028] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[     7.031] (II) Module vboxvideo: vendor="Oracle Corporation"
[     7.031] 	compiled for 10.13.0, module version = 1.0.1
[     7.031] 	Module class: X.Org Video Driver
[     7.031] 	ABI class: X.Org Video Driver, version 13.0
[     7.031] (**) Load address of symbol "VBOXVIDEO" is 0x7f02f3fcd300
[     7.031] (II) VBoxVideo: guest driver for VirtualBox: vbox
[     7.032] (++) using VT number 1

[     7.032] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.2.10
[     7.033] (II) Loading sub module "ramdac"
[     7.033] (II) LoadModule: "ramdac"
[     7.033] (II) Module "ramdac" already built-in
[     7.033] (II) Loading sub module "fb"
[     7.033] (II) LoadModule: "fb"
[     7.033] (II) Loading /usr/lib64/xorg/modules/libfb.so
[     7.034] (II) Module fb: vendor="X.Org Foundation"
[     7.034] 	compiled for 1.13.3, module version = 1.0.0
[     7.034] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     7.034] (II) Loading sub module "shadowfb"
[     7.034] (II) LoadModule: "shadowfb"
[     7.034] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[     7.035] (II) Module shadowfb: vendor="X.Org Foundation"
[     7.035] 	compiled for 1.13.3, module version = 1.0.0
[     7.035] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     7.035] (II) Loading sub module "vgahw"
[     7.035] (II) LoadModule: "vgahw"
[     7.035] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[     7.037] (II) Module vgahw: vendor="X.Org Foundation"
[     7.037] 	compiled for 1.13.3, module version = 0.1.0
[     7.037] 	ABI class: X.Org Video Driver, version 13.1
[     7.037] (II) Loading sub module "dri"
[     7.037] (II) LoadModule: "dri"
[     7.037] (II) Module "dri" already built-in
[     7.038] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[     7.039] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[     7.039] (**) VBoxVideo(0):  Built-in mode "VBoxInitialMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[     7.039] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[     7.039] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[     7.039] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[     7.040] (**) VBoxVideo(0):  Built-in mode "VBoxDynamicMode": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[     7.040] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[     7.040] (**) VBoxVideo(0):  Built-in mode "VBox-1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[     7.040] (II) VBoxVideo(0): Modeline "VBox-1600x1200"x0.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[     7.040] (**) VBoxVideo(0):  Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
[     7.040] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[     7.040] (**) VBoxVideo(0):  Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
[     7.040] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[     7.040] (**) VBoxVideo(0):  Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[     7.040] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[     7.040] (**) VBoxVideo(0):  Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[     7.040] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[     7.040] (**) VBoxVideo(0):  Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[     7.041] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[     7.041] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[     7.041] (==) VBoxVideo(0): RGB weight 888
[     7.041] (==) VBoxVideo(0): Default visual is TrueColor
[     7.041] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[     7.041] (==) VBoxVideo(0): DPI set to (96, 96)
[     7.041] (--) Depth 24 pixmap format is 32 bpp
[     7.064] (II) [drm] DRM interface version 1.4
[     7.064] (II) [drm] DRM open master succeeded.
[     7.064] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[     7.064] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[     7.064] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[     7.064] (II) VBoxVideo(0): X context handle = 0x1
[     7.064] (II) VBoxVideo(0): [drm] installed DRM signal handler
[     7.064] (II) VBoxVideo(0): visual configurations initialized
[     7.065] (II) VBoxVideo(0): Requested monitor count: 1
[     7.067] (II) VBoxVideo(0): Output VBOX0 using monitor section Monitor[0]
[     7.067] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[     7.067] (II) VBoxVideo(0): EDID for output VBOX0
[     7.067] (II) VBoxVideo(0): Manufacturer: VBX  Model: 0  Serial#: 50333014
[     7.067] (II) VBoxVideo(0): Year: 1990  Week: 1
[     7.067] (II) VBoxVideo(0): EDID Version: 1.3
[     7.067] (II) VBoxVideo(0): Digital Display Input
[     7.067] (II) VBoxVideo(0): Indeterminate output size
[     7.067] (II) VBoxVideo(0): Gamma: 2.20
[     7.067] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[     7.067] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     7.067] (II) VBoxVideo(0): Default color space is primary color space
[     7.067] (II) VBoxVideo(0): First detailed timing is preferred mode
[     7.067] (II) VBoxVideo(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[     7.067] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[     7.067] (II) VBoxVideo(0): Manufacturer's mask: 0
[     7.067] (II) VBoxVideo(0): Supported detailed timing:
[     7.067] (II) VBoxVideo(0): clock: 63.7 MHz   Image Size:  0 x 0 mm
[     7.067] (II) VBoxVideo(0): h_active: 1366  h_sync: 1368  h_sync_end 1370 h_blank_end 1372 h_border: 0
[     7.067] (II) VBoxVideo(0): v_active: 768  v_sync: 770  v_sync_end 772 v_blanking: 774 v_border: 0
[     7.067] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[     7.067] (II) VBoxVideo(0): Monitor name: VBOX monitor
[     7.067] (II) VBoxVideo(0): EDID (in hex):
[     7.067] (II) VBoxVideo(0): 	00ffffffffffff005858000056050003
[     7.067] (II) VBoxVideo(0): 	0100010380000078eeee91a3544c9926
[     7.068] (II) VBoxVideo(0): 	0f505400000001010101010101010101
[     7.068] (II) VBoxVideo(0): 	010101010101e3185606500006300202
[     7.068] (II) VBoxVideo(0): 	2200000000000000000000fd0000c800
[     7.068] (II) VBoxVideo(0): 	c864000a202020202020000000fc0056
[     7.068] (II) VBoxVideo(0): 	424f58206d6f6e69746f720a00000010
[     7.068] (II) VBoxVideo(0): 	000a2020202020202020202020200004
[     7.068] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[     7.068] (II) VBoxVideo(0): Modeline "1366x768"x60.0   63.72  1366 1368 1370 1372  768 770 772 774 (46.4 kHz Pb)
[     7.068] (II) VBoxVideo(0): Modeline "1600x1200"x60.0  116.21  1600 1602 1604 1606  1200 1202 1204 1206 (72.4 kHz b)
[     7.068] (II) VBoxVideo(0): Modeline "1440x1050"x60.0   91.62  1440 1442 1444 1446  1050 1052 1054 1056 (63.4 kHz b)
[     7.068] (II) VBoxVideo(0): Modeline "1280x960"x60.0   74.54  1280 1282 1284 1286  960 962 964 966 (58.0 kHz b)
[     7.068] (II) VBoxVideo(0): Modeline "1024x768"x60.0   47.83  1024 1026 1028 1030  768 770 772 774 (46.4 kHz b)
[     7.068] (II) VBoxVideo(0): Modeline "800x600"x60.0   29.31  800 802 804 806  600 602 604 606 (36.4 kHz b)
[     7.068] (II) VBoxVideo(0): Modeline "640x480"x60.0   18.84  640 642 644 646  480 482 484 486 (29.2 kHz b)
[     7.068] (II) VBoxVideo(0): Output VBOX0 connected
[     7.068] (II) VBoxVideo(0): Using exact sizes for initial modes
[     7.068] (II) VBoxVideo(0): Output VBOX0 using initial mode 1366x768 +0+0
[     7.068] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     7.068] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     7.070] (==) VBoxVideo(0): DPMS enabled
[     7.070] (II) VBoxVideo(0): [DRI] installation complete
[     7.070] (--) RandR disabled
[     7.080] (II) SELinux: Disabled on system
[     7.081] (II) AIGLX: Screen 0 is not DRI2 capable
[     7.081] drmOpenDevice: node name is /dev/dri/card0
[     7.081] drmOpenDevice: open result is 12, (OK)
[     7.081] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[     7.081] drmOpenDevice: node name is /dev/dri/card0
[     7.081] drmOpenDevice: open result is 12, (OK)
[     7.081] drmOpenByBusid: drmOpenMinor returns 12
[     7.081] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[     7.081] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[     7.097] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[     7.098] (II) The file referenced, is *NOT* loaded
[     7.098] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[     7.098] (EE) AIGLX error: vboxvideo does not export required DRI extension
[     7.099] (EE) AIGLX: reverting to software rendering
[     7.182] (II) AIGLX: Loaded and initialized swrast
[     7.182] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     7.183] (II) VBoxVideo(0): Setting screen physical size to 361 x 203
[     7.318] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     7.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.319] (**) Power Button: Applying InputClass "anaconda-keyboard"
[     7.319] (II) LoadModule: "evdev"
[     7.319] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[     7.324] (II) Module evdev: vendor="X.Org Foundation"
[     7.324] 	compiled for 1.13.1, module version = 2.7.3
[     7.324] 	Module class: X.Org XInput Driver
[     7.324] 	ABI class: X.Org XInput driver, version 18.0
[     7.324] (II) Using input driver 'evdev' for 'Power Button'
[     7.324] (**) Power Button: always reports core events
[     7.324] (**) evdev: Power Button: Device: "/dev/input/event0"
[     7.324] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.324] (--) evdev: Power Button: Found keys
[     7.324] (II) evdev: Power Button: Configuring as keyboard
[     7.324] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0/event0"
[     7.324] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.324] (**) Option "xkb_rules" "evdev"
[     7.324] (**) Option "xkb_model" "evdev"
[     7.324] (**) Option "xkb_layout" "us,nl"
[     7.325] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     7.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     7.390] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     7.390] (**) Sleep Button: Applying InputClass "anaconda-keyboard"
[     7.390] (II) Using input driver 'evdev' for 'Sleep Button'
[     7.390] (**) Sleep Button: always reports core events
[     7.390] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[     7.390] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     7.390] (--) evdev: Sleep Button: Found keys
[     7.390] (II) evdev: Sleep Button: Configuring as keyboard
[     7.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1/event1"
[     7.390] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[     7.390] (**) Option "xkb_rules" "evdev"
[     7.390] (**) Option "xkb_model" "evdev"
[     7.390] (**) Option "xkb_layout" "us,nl"
[     7.390] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     7.392] (II) config/udev: Adding drm device (/dev/dri/card0)
[     7.392] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[     7.392] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[     7.392] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[     7.392] (**) VirtualBox mouse integration: always reports core events
[     7.392] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event5"
[     7.392] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[     7.392] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[     7.392] (--) evdev: VirtualBox mouse integration: Found absolute axes
[     7.393] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[     7.393] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[     7.393] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[     7.394] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[     7.395] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.395] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input5/event5"
[     7.395] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 8)
[     7.395] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[     7.396] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[     7.396] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[     7.396] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[     7.396] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[     7.396] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event4)
[     7.396] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[     7.396] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[     7.396] (**) VirtualBox USB Tablet: always reports core events
[     7.396] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event4"
[     7.397] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[     7.397] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[     7.397] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[     7.397] (--) evdev: VirtualBox USB Tablet: Found relative axes
[     7.397] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[     7.397] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[     7.397] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[     7.397] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[     7.397] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[     7.397] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[     7.397] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.397] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input4/event4"
[     7.397] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 9)
[     7.397] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[     7.399] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[     7.399] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[     7.399] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[     7.399] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[     7.399] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[     7.399] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[     7.399] (II) No input driver specified, ignoring this device.
[     7.399] (II) This device may have been added with another device file.
[     7.400] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[     7.400] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     7.400] (**) AT Translated Set 2 keyboard: Applying InputClass "anaconda-keyboard"
[     7.400] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     7.400] (**) AT Translated Set 2 keyboard: always reports core events
[     7.400] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[     7.400] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     7.400] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     7.400] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     7.400] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[     7.400] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     7.400] (**) Option "xkb_rules" "evdev"
[     7.400] (**) Option "xkb_model" "evdev"
[     7.400] (**) Option "xkb_layout" "us,nl"
[     7.400] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     7.401] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event3)
[     7.403] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[     7.403] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[     7.403] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[     7.403] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event3"
[     7.403] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[     7.403] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[     7.403] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[     7.403] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[     7.403] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[     7.403] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[     7.403] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[     7.403] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[     7.403] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.403] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
[     7.403] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 11)
[     7.403] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[     7.403] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[     7.403] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[     7.403] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[     7.403] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[     7.404] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[     7.404] (II) No input driver specified, ignoring this device.
[     7.404] (II) This device may have been added with another device file.
[     7.419] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[     7.419] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[     7.419] (II) VBoxVideo(0): Using hsync ranges from config file
[     7.419] (II) VBoxVideo(0): Using vrefresh ranges from config file
[     7.419] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[     7.419] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[     8.406] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[     8.406] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[     8.406] (II) VBoxVideo(0): Using hsync ranges from config file
[     8.406] (II) VBoxVideo(0): Using vrefresh ranges from config file
[     8.406] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[     8.406] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[    29.573] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    29.573] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    29.573] (II) VBoxVideo(0): Using hsync ranges from config file
[    29.573] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    29.573] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    29.573] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[    29.585] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    29.585] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    29.585] (II) VBoxVideo(0): Using hsync ranges from config file
[    29.585] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    29.585] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    29.585] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[    30.079] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    30.079] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    30.079] (II) VBoxVideo(0): Using hsync ranges from config file
[    30.079] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    30.079] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    30.079] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
[    33.516] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[    33.516] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    33.516] (II) VBoxVideo(0): Using hsync ranges from config file
[    33.516] (II) VBoxVideo(0): Using vrefresh ranges from config file
[    33.516] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[    33.517] (II) VBoxVideo(0): Modeline "1366x768"x0.0   63.71  1366 1368 1370 1372  768 770 772 774 -hsync -vsync (46.4 kHz eP)
 
Old 04-07-2013, 02:38 AM   #15
gradinaruvasile
Member
 
Registered: Apr 2010
Location: Cluj, Romania
Distribution: Debian Testing
Posts: 515

Rep: Reputation: 102Reputation: 102
From what i see there, if the hardware acceleration is enabled, the virtualbox driver indeed is compiled and loads at statrtup:

Code:
(II) Module vboxvideo: vendor="Oracle Corporation"
But it has some issues it seems.

Otherwise, the vbox driver is not loaded, but instead the built-in vmware driver is loaded and it uses software acceleration.

http://www.if-not-true-then-false.co...-red-hat-rhel/

Try updating your system and reinstall the additions.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] how to check version of virtualbox guest additions currently installed in guest syste masuch Linux - Virtualization and Cloud 3 09-03-2012 02:05 AM
Upside down screen after installing VirtualBox Guest Additions in Fedora 16 Samael Fedora 3 03-20-2012 07:23 PM
Problem installing guest additions on virtualbox Centos 5.5 64bit guest eljay313 Linux - Virtualization and Cloud 1 09-03-2010 09:22 AM
LXer: Install Guest additions and run fullscreen mode on VirtualBox Guest OS | Linux LXer Syndicated Linux News 0 01-17-2010 06:30 PM
problem installing guest additions in Fedora 11 guest (virtualbox) mia_tech Linux - Desktop 9 07-28-2009 01:15 AM


All times are GMT -5. The time now is 10:42 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration