LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Software
User Name
Password
Linux - Software This forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.

Notices


Reply
  Search this Thread
Old 09-07-2003, 01:35 PM   #1
CIO_BlackRainbo
Member
 
Registered: Jun 2003
Location: /mnt/eth/us/ma/bos/cws
Distribution: Debian SID
Posts: 32

Rep: Reputation: 15
X working only at 320x200


So I just installed Debian 3.0R1 Woody and at the end of it all X wouldn't start. I was okay with that and I messed around with xf86config untill I got it to like me. Unfortunately, it will only do the resolution 320x200 which is really too small to be very useful.

I had previously installed Mandrake 9.0 and it had no problems. I also have a version of Knoppix which works fine with it. As a random thing I tried using the knoppix configured XF86Config-4 but it didn't work

I have pretty cheap PC with an integrated SiS 651 chipset. I think that's probably the problem.

Here's a lot of logs in separate posts:
(lspci, XFree86.0.log, XF86Config-4)
 
Old 09-07-2003, 01:35 PM   #2
CIO_BlackRainbo
Member
 
Registered: Jun 2003
Location: /mnt/eth/us/ma/bos/cws
Distribution: Debian SID
Posts: 32

Original Poster
Rep: Reputation: 15
/sbin/lspci output:


00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0651 (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 04)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS]: Unknown device 7002
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 91)
00:09.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
00:0b.0 Communication controller: Lucent Microelectronics LT WinModem (rev 02)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]: Unknown device 6325
 
Old 09-07-2003, 01:36 PM   #3
CIO_BlackRainbo
Member
 
Registered: Jun 2003
Location: /mnt/eth/us/ma/bos/cws
Distribution: Debian SID
Posts: 32

Original Poster
Rep: Reputation: 15
Log: /var/log/XFree86.0.log



Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Sep 7 12:54:10 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "KDS VS"
(**) | |-->Device "SiS 615"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0651 card 1509,9025 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:02:5: chip 1039,5513 card 1509,9025 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1509,9025 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1509,9025 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1509,9025 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7001 card 1509,9025 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:3: chip 1039,7002 card 1509,9025 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1509,9025 rev 91 class 02,00,00 hdr 00
(II) PCI: 00:09:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0b:0: chip 11c1,044e card 11c1,044c rev 02 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1039,6325 card 1509,9025 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xec000000 - 0xec0fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) Bus -1: bridge is at (0:2:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) SiS unknown chipset (0x6325) rev 0, Mem @ 0xe0000000/27, 0xec000000/17, I/O @ 0x9000/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xec126000 - 0xec127fff (0x2000) MX[B]E
[1] -1 0 0xec125000 - 0xec125fff (0x1000) MX[B]E
[2] -1 0 0xec123000 - 0xec123fff (0x1000) MX[B]E
[3] -1 0 0xec122000 - 0xec123fff (0x2000) MX[B]E
[4] -1 0 0xec121000 - 0xec121fff (0x1000) MX[B]E
[5] -1 0 0xec120000 - 0xec13ffff (0x20000) MX[B]E
[6] -1 0 0xec124000 - 0xec127fff (0x4000) MX[B]E
[7] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]E
[8] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[11] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]E
[12] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]E
[13] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]E
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E
[15] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E
[16] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]E
[17] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[18] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[19] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[20] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[21] -1 0 0x00009000 - 0x0000907f (0x80) IX[B](B)
(II) PCI Memory resource overlap reduced 0xec122000 from 0xec123fff to 0xec122fff
(II) PCI Memory resource overlap reduced 0xec120000 from 0xec13ffff to 0xec120fff
(II) PCI Memory resource overlap reduced 0xec124000 from 0xec127fff to 0xec124fff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xec126000 - 0xec127fff (0x2000) MX[B]E
[1] -1 0 0xec125000 - 0xec125fff (0x1000) MX[B]E
[2] -1 0 0xec123000 - 0xec123fff (0x1000) MX[B]E
[3] -1 0 0xec122000 - 0xec122fff (0x1000) MX[B]E
[4] -1 0 0xec121000 - 0xec121fff (0x1000) MX[B]E
[5] -1 0 0xec120000 - 0xec120fff (0x1000) MX[B]E
[6] -1 0 0xec124000 - 0xec124fff (0x1000) MX[B]E
[7] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]E
[8] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[11] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]E
[12] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]E
[13] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]E
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E
[15] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E
[16] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]E
[17] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[18] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[19] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[20] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[21] -1 0 0x00009000 - 0x0000907f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xec126000 - 0xec127fff (0x2000) MX[B]E
[6] -1 0 0xec125000 - 0xec125fff (0x1000) MX[B]E
[7] -1 0 0xec123000 - 0xec123fff (0x1000) MX[B]E
[8] -1 0 0xec122000 - 0xec122fff (0x1000) MX[B]E
[9] -1 0 0xec121000 - 0xec121fff (0x1000) MX[B]E
[10] -1 0 0xec120000 - 0xec120fff (0x1000) MX[B]E
[11] -1 0 0xec124000 - 0xec124fff (0x1000) MX[B]E
[12] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]E
[13] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[18] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]E
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]E
[20] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]E
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E
[22] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E
[23] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]E
[24] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[25] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[26] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[27] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[28] -1 0 0x00009000 - 0x0000907f (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "vga"
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 4.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xec126000 - 0xec127fff (0x2000) MX[B]E
[6] -1 0 0xec125000 - 0xec125fff (0x1000) MX[B]E
[7] -1 0 0xec123000 - 0xec123fff (0x1000) MX[B]E
[8] -1 0 0xec122000 - 0xec122fff (0x1000) MX[B]E
[9] -1 0 0xec121000 - 0xec121fff (0x1000) MX[B]E
[10] -1 0 0xec120000 - 0xec120fff (0x1000) MX[B]E
[11] -1 0 0xec124000 - 0xec124fff (0x1000) MX[B]E
[12] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]E
[13] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[18] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]E
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]E
[20] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]E
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E
[22] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E
[23] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]E
[24] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[25] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[26] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[27] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[28] -1 0 0x00009000 - 0x0000907f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xec126000 - 0xec127fff (0x2000) MX[B]E
[6] -1 0 0xec125000 - 0xec125fff (0x1000) MX[B]E
[7] -1 0 0xec123000 - 0xec123fff (0x1000) MX[B]E
[8] -1 0 0xec122000 - 0xec122fff (0x1000) MX[B]E
[9] -1 0 0xec121000 - 0xec121fff (0x1000) MX[B]E
[10] -1 0 0xec120000 - 0xec120fff (0x1000) MX[B]E
[11] -1 0 0xec124000 - 0xec124fff (0x1000) MX[B]E
[12] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]E
[13] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[21] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]E
[22] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]E
[23] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]E
[24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E
[25] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E
[26] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]E
[27] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[28] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[29] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[30] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[31] -1 0 0x00009000 - 0x0000907f (0x80) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) VGA(0): Depth 8, (--) framebuffer bpp 8
(==) VGA(0): RGB weight 666
(==) VGA(0): Default visual is PseudoColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) VGA(0): videoRam: 2048 kBytes (using 64 kBytes).
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(==) VGA(0): Virtual size is 320x200 (pitch 320)
(**) VGA(0): Built-in mode "Generic 320x200 default mode": 12.6 MHz (scaled from 25.2 MHz), 31.5 kHz, 70.2 Hz (VScan)
(II) VGA(0): Modeline "Generic 320x200 default mode" 12.59 320 336 384 400 200 206 207 224 vscan 2 -hsync +vsync
(++) VGA(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xec000000 - 0xec01ffff (0x20000) MS[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xec126000 - 0xec127fff (0x2000) MX[B]E
[8] -1 0 0xec125000 - 0xec125fff (0x1000) MX[B]E
[9] -1 0 0xec123000 - 0xec123fff (0x1000) MX[B]E
[10] -1 0 0xec122000 - 0xec122fff (0x1000) MX[B]E
[11] -1 0 0xec121000 - 0xec121fff (0x1000) MX[B]E
[12] -1 0 0xec120000 - 0xec120fff (0x1000) MX[B]E
[13] -1 0 0xec124000 - 0xec124fff (0x1000) MX[B]E
[14] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]E
[15] -1 0 0xec000000 - 0xec01ffff (0x20000) MX[B](B)
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[20] 0 0 0x00009000 - 0x0000907f (0x80) IS[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]E
[24] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]E
[25] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]E
[26] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]E
[27] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E
[28] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E
[29] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]E
[30] -1 0 0x00000374 - 0x00000377 (0x4) IX[B]E
[31] -1 0 0x00000170 - 0x0000017f (0x10) IX[B]E
[32] -1 0 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[33] -1 0 0x000001f0 - 0x000001ff (0x10) IX[B]E
[34] -1 0 0x00009000 - 0x0000907f (0x80) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!



I think the following excerpy is probably particularly relavant:

"

(**) VGA(0): videoRam: 2048 kBytes (using 64 kBytes).

...

(==) VGA(0): Virtual size is 320x200 (pitch 320)
(**) VGA(0): Built-in mode "Generic 320x200 default mode": 12.6 MHz (scaled from 25.2 MHz), 31.5 kHz, 70.2 Hz (VScan)
(II) VGA(0): Modeline "Generic 320x200 default mode" 12.59 320 336 384 400 200 206 207 224 vscan 2 -hsync +vsync

"

Why is it only using 64k? I have tried it with all reasonable VideoRam settings including it commented out and they all act the same.

The SiS driver it has just doesn't work at all.
 
Old 09-07-2003, 01:37 PM   #4
CIO_BlackRainbo
Member
 
Registered: Jun 2003
Location: /mnt/eth/us/ma/bos/cws
Distribution: Debian SID
Posts: 32

Original Poster
Rep: Reputation: 15
This is the /etc/X11/XF86Config-4 file:


# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
# Load "glx"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "KDS VS"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5, 35.15, 35.5

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
Identifier "SiS 615"
Driver "vga"
# unsupported card
VideoRam 2048
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "SiS 615"
Monitor "KDS VS"
DefaultDepth 8

Subsection "Display"
Depth 8
Modes "800x600" "1024x768" "1280x1024" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600" "1024x768" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection
 
Old 02-05-2004, 10:32 AM   #5
nette
LQ Newbie
 
Registered: Feb 2004
Posts: 4

Rep: Reputation: 0
what happened with this?

hi, were you able to find a solution for this? please let me know coz i'm getting the same exact problem!!! (and it's driving me nuts!!)

any helpful info or definite solution would be GREATLY appreciated
 
Old 02-05-2004, 03:17 PM   #6
CIO_BlackRainbo
Member
 
Registered: Jun 2003
Location: /mnt/eth/us/ma/bos/cws
Distribution: Debian SID
Posts: 32

Original Poster
Rep: Reputation: 15
Yeah, I did get mine to work. The problem for me was the combination of a new graphics card and Debian Gun\Linux shipping with an old version of X-windows (the graphics program).

Does this apply to you? If so I can tell you how to fix it. Your problem is more likely, though, an faulty configuration file for X-Windows. To fix this:
1) find your manuals for the computer and monitor
2) start the computer
3) switch to a virtual terminal (press ctrl + 1 when it starts)
4) log in as root
5) run "XF86Config" and follow instructions. When it asks for a place to write the output to, give it "/etc/X11/XF86Config-4"

These are the methods for Debian. If you have a different version, tell me, and I'll see what I can do.
- cbr
 
Old 02-06-2004, 09:22 AM   #7
nette
LQ Newbie
 
Registered: Feb 2004
Posts: 4

Rep: Reputation: 0
hmm, haven't tried that specific procedure you did, but i did try to change the /etc/X11/XF86Config file and /etc/X11/XF86Config-4 file as well but sad to say it didn't work. i tried Xconfigurator and it still didn't work

btw, i'm using redhat 7.2 on an SiS6326 video controller.

sigh, but i'll try what you suggested. unfortunately, can't do that at the moment coz the "problematic" unit is in the office. will try that and i'll keep you posted.
 
Old 02-06-2004, 09:38 AM   #8
CIO_BlackRainbo
Member
 
Registered: Jun 2003
Location: /mnt/eth/us/ma/bos/cws
Distribution: Debian SID
Posts: 32

Original Poster
Rep: Reputation: 15
I belive Xconfigurator does the same as the program I was giving advice for. It sounds to me like RedHat 7.2 doesn't ship with a recent enough version of X. I don't really know much about RedHat, though, so you might want to ask a RedHat group how to update X under RedHat.
- cbr
 
Old 02-11-2004, 05:45 PM   #9
nette
LQ Newbie
 
Registered: Feb 2004
Posts: 4

Rep: Reputation: 0
SOLUTION!

thank you CIO_BlackRainbo!!! got mine to work, finally!!

did what you told me to, xf86config > copy config file to xf86config-4, but it didn't work at first. and i remembered, i read somewhere that you could change the the SiS video driver to "vesa" instead of "vga" or "svga" or "sis". so i edited the xf86config config file again, copied it to the xf86config-4 file, typed startx and wa-lah!! an ultimate fix!!!

thanks so much! and i hope this would help other people having SiS 6326 - redhat 7.2 video problems as well.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Intel sound not working, usb modem not working. siriusb Linux - Hardware 8 03-04-2006 11:16 PM
F1 - F10 not working when F13 - F20 working in Linux haivinay Linux - General 0 09-20-2004 08:31 AM
F3-F10 is not working when F13-F20 is working in redht-8. haivinay Linux - General 0 09-20-2004 07:39 AM
Link/Applet not working in all Linux browsers, but working in IE MasterPatricko Linux - Software 6 09-04-2004 04:39 AM
cannot download files in mozilla -save dialog not working, galeon not working cmisip Linux - General 0 08-03-2003 04:25 PM


All times are GMT -5. The time now is 07:21 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration